Micro‐Raman scattering spectroscopy study of Li‐doped and undoped ZnO needle crystals

ZnO nanostructures have attracted great attention for possible applications in optoelectronic and spintronic devices. The electrical resistivity because of carriers can be improved by the introduction of Li ions, as Li is a possible dopant for achieving p‐type ZnO. We have carried out a comprehensive micro‐Raman scattering study of the phonons in 1% Li‐ and undoped ZnO needle crystals grown and annealed at 1073 K for 1 and 2 h under oxygen environment. Phonon mode of doped and undoped ZnO does not show any measurable shift for the doping concentration of 1%. As line width is related to point defect density, we find for both Li‐ and undoped ZnO crystals the crystallinity is improving towards the tip of the needle crystals. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman investigation of silicon nanocrystals: quantum confinement and laser‐induced thermal effects

We present a detailed experimental and theoretical Raman investigation of quantum confinement and laser‐induced local thermal effects on hydrogenated nanocrystalline silicon with different nanocrystal sizes (3.6–6.2 nm). The local temperature was monitored by measuring the Stokes/anti‐Stokes peak ratio with the laser power density range from ~120 to 960 kW/cm². In combination with the three‐dimensional phonon confinement model and the anharmonic effect, which incorporates the three‐phonon and four‐phonon decay processes, we revealed an asymmetrical decay process with wavenumbers ~170 and 350 cm^–1, an increasing anharmonic effect with nanocrystal sizes, and a shortening lifetime with enhanced temperature and decreasing nanocrystal dimension. Furthermore, we demonstrated experimentally that for Si nanocrystals smaller than 6 nm, the quantum confinement effect is dominant for the peak shift and line broadening. Copyright © 2011 John Wiley & Sons, Ltd.     

Micro‐Raman analysis of GaAs Schottky barrier solar cell

Gallium arsenide (GaAs) cells have been in the race with silicon single‐crystal cells for the highest efficiency photovoltaic devices. The annealed, irradiated Schottky barrier (SB) solar cells were characterised using micro‐Raman spectroscopy at three different regions: namely, at the (1) ohmic contact region, (2) unirradiated region and (3) irradiated region. We also present a micro‐Raman study of the damage process in annealed GaAs SB solar cells bombarded by high‐energy ions. A Gaussian line shape was fitted to the Raman spectra of the longitudinal optical phonon A₁(LO), and parameters such as intensity, full width at half maximum (FWHM) and the area under the peak were obtained for the different annealing temperatures. Biaxial stress (σ), carrier concentration (n), depletion length (L_d), dislocation velocity (ν) and life time of the first‐order optical phonon (τ) of the A₁(LO) mode of the irradiated region of the samples annealed at different temperatures were calculated. Copyright © 2010 John Wiley & Sons, Ltd.     

Micro‐Raman investigations on inclusions of unusual habit in a commercial tanzanite gemstone

The vibrational properties of submillimetre size inclusions of unusual habit in a commercial tanzanite gemstone were investigated by confocal Raman microspectroscopy with the aim of probing both their chemical composition and crystal structure. Highly contrasted Raman spectra were recorded in confocal conditions from several inclusions incorporated at different depths, ranging between a few microns to some tens of microns beneath the gemstone surface. The observed spectral features were identified as specific markers of hematite (α‐Fe₂O₃). Their unambiguous assignment has been inferred by comparing our experimental findings with the literature data recorded either in single crystals of hematite or in other iron oxides and oxyhydroxides. Our results rule out the presence of any pseudomorphic variety of hematite in the investigated gemstone, while confocal micro‐Raman spectroscopy definitively proved itself as a very reliable, relatively costless and noninvasive tool for unambiguous identification of subsurface regions of gemstones. Copyright © 2011 John Wiley & Sons, Ltd.     

Multianalyte immunoassay based on surface‐enhanced Raman spectroscopy

In this paper, two immunoassay methods based on SERS are developed for multiplex analysis, both of which stemmed from the concept of forming a sandwich structure ‘capture antibody substrate/antigen/Raman‐reporter‐labeled immuno‐nanoparticles’. They are two‐molecule labeled one‐nanoparticle and one‐molecule labeled two‐nanoparticle methods. In both the methods, two different antibodies covalently bound to a solid substrate can specifically capture two different antigens from a sample. The captured antigens in turn bind selectively to their corresponding antibodies immobilized on Raman‐reporter‐labeled nanoparticles. Multianalyte immunoassay is successfully demonstrated by the detection of characteristic Raman bands of the probe molecules only when the antigen and antibody are matched. Copyright © 2007 John Wiley & Sons, Ltd.     

Micro‐Raman spectroscopic study of artificially aged natural and dyed wool

The objective of this study was to evaluate the use of micro‐Raman spectroscopy as a non‐invasive vibrational spectroscopic technique applied to the examination of wool samples, which may be applied to textile materials of cultural heritage interest. In this work, a selection of wool materials were primarily investigated in their unaged states through the utility of a natural wool reference together with selected samples dyed with different natural colorants, namely woad, weld and madder. The identification of the main modes of vibration of the wool fibre keratin was assessed in all the samples, which aided the determination of the changes within the protein structure, in particular, through the cysteine and peptide cross‐linkages brought about by the addition of the dyes that can produce effects similar to degradation. The dye too was assessed importantly to enable its identification through its characteristic scattering or fluorescence emissions on a woollen matrix, as well as to ascertain whether a uniform covering across the surface of the wool was achieved or not. Regarding the artificial degradation of the samples it was possible to observe numerous modifications within the molecular structure of the wool, in particular, within the amide I, C H bending, amide III and S‐S stretchings along with the physical photo‐yellowing of fibres given by the presence of lipids dispersed across the surface of the wool. The effects of ageing on the dyed samples were also investigated, indicating that many of the bands relative to the colorants were still present, yet so too were numerous vibrations from the wool that also indicated a certain level of stress and degradation to the underlying wool. Copyright © 2008 John Wiley & Sons, Ltd.     

Micro‐Raman study of orbiton–phonon coupling in YbVO3

First‐order and multiphonon Raman active excitations are studied in YbVO₃ as a function of temperature in the orthorhombic and monoclinic phases. Below T ≃ 170 K, a G‐type orbital ordering with a concomitant monoclinic transition occurs. They enhance the phonon polarizabilities, allowing the resolution of room‐temperature bands, and activate new excitations around 700 cm⁻¹. Below T ∼ 65 K, the 700 cm⁻¹ excitations disappear, indicating a C‐type orbital ordering and a return to the orthorhombic structure. The observed phonon combinations around 1400 cm⁻¹ with a dominant Jahn‐Teller vibration at ∼690 cm⁻¹ reflect a possible orbiton‐phonon coupling. Copyright © 2011 John Wiley & Sons, Ltd.     

Micro‐Raman spectroscopic study of El Gasco pumice,western Spain

A micro‐Raman spectroscopic study of pumice materials from El Gasco (Sierra de Gata, Spain) has been performed for the first time. The obtained spectra allow the precise identification of the minerals, quartz, haematite, magnetite, ilmenite, rutile and anatase, in general agreement with results obtained by complementary techniques of X‐Ray Diffraction (XRD) and Electron Microprobe. Also, fayalite and ferroan ringwoodite have been identified. The presence of high‐pressure polymorphs indicates that the pumice rocks were subjected to high‐pressure conditions quite similar to those observed in shock‐induced molten and recrystallised materials, such as some meteorites and impact‐related rocks. Copyright © 2006 John Wiley & Sons, Ltd.     

Raman spectroscopy studies of structural changes in hydrated titanium and tin dioxide gels under drying

Raman spectroscopy is used in this work to reveal an increase in the size of anatase crystallites in the process of drying of hydrated titanium dioxide gel and ordering of the structure of primary particles of hydrated tin dioxide gel under drying. Raman spectra are interpreted with account of dimensional effects. It is found that mechanical stresses that arise in the materials under drying have a great effect on the structural changes found there. TERMOXIDE Research and Production Company, 624051 Zarechnyi, Sverdlovsk Region, P/O Box 94, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 2, pp. 266–268, March–April, 1997.     

Micro‐Raman investigation of transition‐metal‐doped ZnO nanoparticles

We measured the Raman spectra of ZnO nanoparticles (ZnO‐NPs), as well as transition‐metal‐doped (5% Mn(II), Fe(II) or Co(II)) ZnO nanoparticles, with an average size of 9 nm. A typical Raman peak at 436 cm⁻¹ is observed in the ZnO‐NPs, whereas Zn_1−xMn_xO, Zn_1−xFe_xO and Zn_1−xCo_xO presented characteristic peaks at 661, 665 and 675 cm⁻¹, respectively. These peaks can be related to the formation of Mn₃O₄, Fe₃O₄ and Co₃O₄ species in the doped ZnO‐NPs. Moreover, these samples were analyzed at various laser powers. Here, we observed new vibrational modes (512, 571 and 528 cm⁻¹), which are specific to Mn, Fe and Co dopants, respectively, and ZnO‐NPs did not reveal any additional modes. The new peaks were interpreted either as disorder activated phonon modes or as local vibrations of Mn‐, Fe‐ and Co‐related complexes in ZnO. Copyright © 2007 John Wiley & Sons, Ltd.     

Micro‐Raman and portable Raman spectroscopic investigation of blue pigments in selected Delft plates (17–20th Century)

The blue pigment as well as other materials in a blue, white and ‘gold’ 17th century Delft dish were analysed and compared to the blue pigment(s) used in a modern blue‐and‐white Delft dish, obtained from a tourist shop in Amsterdam in 2004. The ancient Delft blue pigment was compared to a commercial Delft blue powder identified as a cobalt‐doped willemite, Zn_2−xCo_xSiO₄. The 17th century Delft pigment showed a closer correspondence to the olivine, alpha‐cobalt silicate. The pigment in the modern blue Delft dish was mainly a vanadium‐doped zircon, ZrSiO₄:V⁴⁺, with small amounts of cobalt, identified by EDX analysis. The cobalt compound could, however, not be characterised here for the modern dish. The pigment in the ‘golden’ rim was identified as pyrochlore yellow, PbSnSbO_6.5. Copyright © 2009 John Wiley & Sons, Ltd.     

In situ confocal micro‐Raman spectroscopic investigation of rearrangement kinetics and phase evolution of UHMWPE during annealing

Ultrahigh molecular weight polyethylene was investigated using in situ confocal micro‐Raman spectroscopy during annealing at 110.0 °C. Based on the Raman spectra, crystalline, amorphous, and all‐trans noncrystalline fractions were recognized to evaluate rearrangement kinetics during isothermal annealing at 110.0 °C and phase evolution during cooling from 110.0 to 30.0 °C. For the crystalline fraction, a substantial increase from 0.600 ± 0.001 to 0.639 ± 0.008 was observed during the first 24.2 min of annealing; a very gradual increase from 0.639 ± 0.001 to 0.679 ± 0.001 occurred during the following 114.6 min. For the amorphous phase fraction, conversely, a sharp decrease from 0.240 ± 0.000 to 0.213 ± 0.004 was exhibited during the first 24.2 min of annealing, and then, a flat decrease happened from 0.213 ± 0.004 to 0.192 ± 0.001 as time expanded to 138.8 min. For the all‐tans noncrystalline fraction, a gradual decrease was shown from 0.160 ± 0.000 at 0.0 min to 0.128 ± 0.001 at 138.8 min. The rearrangement rate constant K was obtained to be 0.632 by an Avrami equation. During cooling from 110.0 to 30.0 °C, there were two phase evolution regions: region 1 from 110.0 to 90.0 °C and region 2 from 90.0 to 30.0 °C. The crystal lamella thickened faster in region 1 than in region 2. The amorphous layer continually decreased in content in the combined region of 1 and 2. The all‐trans noncrystalline phase obviously decreased in region 1 and then almost maintained a constant level in region 2. Copyright © 2014 John Wiley & Sons, Ltd.     

Simple method to prepare size‐controllable gold nanoparticles in solutions and their applications on surface‐enhanced Raman scattering

We report here, for the first time, a simple method to prepare size‐controllable Au nanoparticles (NPs) in aqueous solutions from bulk Au substrates. First, chitosan (Ch)‐capped Au‐containing complexes were prepared by electrochemical oxidation–reduction cycles in 0.1 N NaCl and 1 g/l Ch solutions. Then the solutions were heated from room temperature to boiling at different heating rates to synthesize size‐controllable Au NPs. The particle sizes of the prepared Au(111) NPs could be controlled from 5 to 30 nm with an increase of the heating rate during preparation. Experimental results indicate that the prepared Au(111) NPs with diameters ranging from 10 to 30 nm can serve as surface‐enhanced Raman scattering active probes for molecules of rhodamine 6G. Copyright © 2010 John Wiley & Sons, Ltd.     

Rapid screening of sildenafil and tadalafil adulterated in healthcare products by Micro‐Raman spectroscopy

Sildenafil and tadalafil are inhibitors of phosphodiesterase type 5, which are frequently added into healthcare products. The objective of this study was to evaluate the possibility of using micro‐Raman spectroscopy as a non‐destructive technique to screen for sildenafil and tadalafil in adulterated healthcare products. Using a viewing microscope, the suspect area of healthcare products was selected, which had a discernable crystal form or shape from the surrounding zone. Optimization of instrumental parameters of the Raman spectrometer was chosen to reduce the background fluorescence, and the Raman spectra were collected. The spectra collected were compared with the standard Raman spectra of pure sildenafil and tadalafil. Samples with an identifiable Raman signature to that of sildenafil or tadalafil could be confirmed using liquid chromatography–mass spectrometry (LC/MS). Additionally, wavelet denoising combined with similarity calculation was used to establish an automated approach for discrimination of adulterated healthcare products. Correlation coefficient was chosen for similarity calculation based on the spectra collected and the standard Raman spectra of pure sildenafil and tadalafil. We compared ten samples, secured by administrative authorities in Shanghai, to analyse and demonstrate the capabilities of our proposed method. We established six samples containing sildenafil or tadalafil warranting analysis using LC/MS. Thus, the use of micro Raman spectroscopy provides a quick, convenient and non‐destructive method for screening adulterated chemicals in healthcare products. Raman spectroscopy combined with similarity calculation requires little training after spectra library is developed, thus showing great promise to identify the adulterated healthcare products in the future. Copyright © 2012 John Wiley & Sons, Ltd.     

Halide‐ion‐assisted increase of surface‐enhanced hyper‐Raman scattering: a clear observation of the chemical effect

We show that the increase of surface‐enhanced hyper‐Raman scattering (SEHRS) intensity of organic dye molecules adsorbed on single silver (Ag) colloid aggregate in the presence of halide ions is a direct evidence of the chemical effect in the enhancement mechanism. Time‐dependent SEHRS measurements before and after adding halide ions enabled us to distinctly observe the chemical effect. The presence of the halide ions results to a more stable chemical interaction between metal and dye molecule, making it more resistant against photodegradation effects. This study can contribute in elucidating the chemical effect mechanism and aid in the development of SEHRS as a useful spectroscopic tool. Copyright © 2008 John Wiley & Sons, Ltd.     

Micro‐Raman spectroscopy analysis of 16th century Portuguese Ferreirim Masters oil paintings

In the present work a set of eight altarpieces of the 16th century (1532–1534), attributed to the Ferreirim Masters (Gregório Lopes, Garcia Fernandes and Cristóvão de Figueiredo), from the Santo António de Ferreirim Monastery (North of Portugal), were analysed by micro‐Raman spectroscopy. For this purpose some samples were taken from the paintings to characterise its artist's ‘school’. It was found that the preparation was made with chalk and gypsum and the palette composed mainly of lamp black, azurite, lead white (mixed with other pigments), lead–tin yellow type I, goethite (the main constituent of yellow ochre), red lead (as under painting), haematite (the main constituent of red ochre) and vermilion. Indigo was detected in one sample. Some derivatives and degradation products were found mainly in the panels subjected to high temperatures during a fire occurred in 1954: a degradation product from massicot or red lead, lead carbonate (dehydrated derivative of lead white), bassanite and anhydrite (hemi‐ and dehydrated forms of gypsum). These results are compared with those of previous total reflection X‐ray fluorescence spectroscopy (TXRF) analyses. Copyright © 2009 John Wiley & Sons, Ltd.     

Micro‐Raman depth profiling on polished cross‐sections: the mapping of oxalates used in protective treatment of carbonatic substrate

We present the first depth profiling on a polished cross‐section carried out by micro‐Raman spectroscopy aimed at investigating the penetration depth of an inorganic protective material (ammonium oxalate) applied on carbonatic surfaces (ancient plaster) and to detect the distribution of mineralogical phases inside the material. The reason for such a Rapid Communication is the importance of our study for the field of conservation, in which at present the treatment with oxalates is a hot issue. Copyright © 2008 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of N‐acetylneuraminic acid on silver nanoparticle surface

N‐Acetylneuraminic acid (sialic acid, Neu5Ac) has recently gained interest as a potential marker for a variety of pathophysiological processes, although no Raman study has been reported for this important biomolecule. In this paper, the vibrational properties of Neu5Ac were studied by means of Raman, surface‐enhanced Raman scattering (SERS), and density functional theory calculations. By adsorption of Neu5Ac on silver nanoparticle surface, strongly enhanced Raman intensities are obtained, allowing easy measurement of small amounts of aqueous Neu5Ac (10 µl of a 10⁻⁷ m solution) utilizing low laser power and short exposure time. The mechanism of adsorption of Neu5Ac on the silver surface is discussed on the basis of the experimental and theoretical results. This study demonstrates that SERS can provide an effective tool for development of a label‐free, rapid, and sensitive optical platform for identification of Neu5Ac. Copyright © 2014 John Wiley & Sons, Ltd.     

Improved performances on surface‐enhanced Raman scattering based on electrochemically roughened gold substrates modified with SiO2 nanoparticles

In this work, we use electrochemical oxidation–reduction cycles (ORC) methods to prepare surface‐enhanced Raman scattering (SERS)‐active gold substrates modified with SiO₂ nanoparticles to improve the corresponding SERS performances. Based on the modified substrates, the SERS of Rhodamine 6G (R6G) exhibits a higher intensity by 3‐fold of magnitude, as compared with that of R6G adsorbed on a SERS‐active Au substrate without the modification of SiO₂ nanoparticles. Moreover, the SERS enhancement capabilities of the modified and the unmodified Au substrates are seriously destroyed at temperatures higher than 250 and 200 °C, respectively. These results indicate that the modification of SiO₂ nanoparticles can improve the thermal stability of SERS‐active substrates. The aging in SERS intensity is also depressed on this modified Au substrate due to the contribution of SiO₂ nanoparticles to SERS effects. Copyright © 2009 John Wiley & Sons, Ltd.