Characterization and optimization of AuNPs labeled by Raman reporters on glass based on silver enhancement

In this report, gold nanoparticles (AuNPs) labeled by Raman reporters (AuNPs‐R6G) were assembled on glass and used as the seeds to in situ grow silver‐coated nanostructures based on silver enhancer solution, forming the nanostructures of AuNPs‐R6G@Ag, which were characterized by scanning electron microscopy (SEM) and UV‐visible spectroscopy. More importantly, the obtained silver‐coated nanostructures can be used as a surface enhancement Raman scattering (SERS) substrate. The different SERS activities can be controlled by the silver deposition time and assembly time of AuNPs‐R6G on glass. The results indicate that the maximum SERS activity could be obtained on AuNPs‐R6G when these nanostructures were assembled on glass for 2 h with silver deposition for 2 min. In addition, the reproducibility of SERS signal on the fabricated nanostructures is very high with the intensity error lower than 15%, which has great promise as a probe for application in bioanalysis. Copyright © 2008 John Wiley & Sons, Ltd.     

Self‐assembled silver nanoparticle monolayer on glassy carbon: an approach to SERS substrate

In this paper, the fabrication of an active surface‐enhanced Raman scattering (SERS) substrate by self‐assembled silver nanoparticles on a monolayer of 4‐aminophenyl‐group‐modified glassy carbon (GC) is reported. Silver nanoparticles are attached to the substrate through the electrostatic force between the negatively charged silver nanoparticles and the positively charged 4‐aminophenyl groups on GC. The active SERS substrate has been characterized by means of tapping‐mode atomic force microscopy (AFM), indicating that large quantities of silver nanoparticles are uniformly coated on the substrate. Rhodamine 6G (R6G) and p‐aminothiophenol (p‐ATP) are used as the probe molecules for SERS, resulting in high sensitivity to the SERS response, with the detection limit reaching as low as 10⁻⁹ M . This approach is easily controlled and reproducible, and more importantly, can extend the range of usable substrates to carbon‐based materials for SERS with high sensitivity. Copyright © 2007 John Wiley & Sons, Ltd.     

Detection of the potential tumor marker of AFP using surface‐enhanced Raman scattering‐based immunoassay

The development of rapid, highly sensitive detection methods for α‐fetoprotein (AFP) is very important. As hepatocellular carcinoma is closely related to the level of AFP in the blood, it is necessary to maintain an AFP concentration below the safety limit. In this paper, we propose a universal, rapid, sensitive, and highly specific immunoassay system utilizing gold nanoparticles (AuNPs) and surface‐enhanced Raman scattering (SERS). This new system features a sandwich structure combining mercaptobenzoic acid‐labeled immunogold nanoparticles with the antigen and the antibody atop a pre‐designed substrate made of a glass slide modified with AuNPs. This SERS‐based immunoassay can detect AFP concentrations as low as 100 pg/ml, which is a significant improvement on the capabilities of the enzyme‐linked immunosorbent assay method. A good linear relationship between the SERS peak intensity and the logarithm of antigen concentrations (from 1 ng/ml to 100 ng/ml) was observed. This technique provides an effective model for the detection of biomarkers in medical diagnostics, criminal investigation, and other fields. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface enhanced Raman scattering of molecules related to highly ordered gold cavities

We presented a controlled particles‐in‐cavity (PIC) pattern for surface‐enhanced Raman scattering (SERS) detection. The periodic gold cavity array was fabricated by electrodeposition using highly ordered polystyrene spheres as a template. The as‐prepared gold cavities can be used as a SERS active substrate with significant spectral enhancement and reproducibility, which was evaluated by SERS signals using 4‐mercaptobenzoic acid (4‐MBA) as probe molecules. The surface of these gold cavities was further functionalized with cetyltrimethylammonium bromide molecules, which may immobilize the 4‐MBA‐modified silver nanoparticles in the gold cavity to form a PIC structure via the electrostatic interaction. We have demonstrated that there exists a pH window for the immobilization of the nanoparticles inside cavities. Therefore, the silver nanoparticles can be selectively immobilized into the functionalized gold cavities under the optimized pH value of the media. Further enhancement of the Raman scattering of the labeled molecules can be achieved due to the interconnection between the silver nanoparticles and gold cavity. Copyright © 2013 John Wiley & Sons, Ltd.     

SER(R)S of porphyrins on Ag nanoparticles immobilized by silane: a unique way to obtain free‐base porphyrin spectra

We measured the surface‐enhanced resonance Raman scattering (SER(R)S) spectra of 5,10,15,20‐tetrakis (1‐methyl‐4‐pyridyl)porphyrin (TMPyP) by using solid SERS‐active substrates: Ag nanoparticles immobilized by aminosilane on glass plates. We report the surprising result that by using such substrates it is possible to obtain SER(R)S spectra of porphyrins in the unperturbed free‐base form, although by using silver nanoparticles directly in solution, the porphyrin molecules are completely metalated. We suggest that silane used for nanoparticle immobilization modifies the surface properties and, therefore, makes porphyrin metalation impossible. Copyright © 2007 John Wiley & Sons, Ltd.     

A durable plastic substrate for surface-enhanced Raman spectroscopy

A novel durable substrate has been prepared for surface-enhanced Raman spectroscopy (SERS). The substrate is fabricated by reduction of silver nitrate using poly(vinyl pyrrolidone) (PVP) polymer as stabilizers. The SERS-active particles are based on poly(methylmethacrylate) (PMMA) materials, producing stable and optically translucent substrates. The stability of silver particles on the substrate was demonstrated by characterizing the localized surface plasmon resonance (LSPR) band of the elemental silver particles. The SERS activity was evaluated by detecting the signal from Raman probe molecules, Rhodamine 6G (R6G). This plastic substrate material is easy to prepare, inexpensive, and sturdy for SERS applications.     

Immune recognition construct plasmonic dimer for SERS‐based bioassay

We have first time demonstrated the construction of a plasmonic gold dimer model for bioassays based on immune recognition with surface‐enhanced Raman scattering (SERS). To induce a strong plasmonic coupling effect, a dimer of gold nanoparticles (NPs) with a Raman label located between adjacent NPs is assembled through specific recognition in biological systems. One promising application for this model is the provision of a new type of in situ self‐calibrated and reliable SERS platform where biotinylated molecules can selectively be trapped by streptavidin and placed in the gap enhanced plasmonic field, which may enable the development of powerful, biospecific recognition‐based SERS assays. The capabilities of the dimeric constructions for analytical applications were demonstrated through the use of the SERS technique to detect biotin at very low concentrations. Additionally, the spatial SERS radiation for the gold dimer assembled on the silicon slide was simulated using the finite‐difference time‐domain method; this simulation demonstrated the distribution of the electric field as well as the utility of the proposed system, thereby introducing potential uses of bio‐specific recognition as well as opportunities for the construction of plasmonically coupled nanostructures and bioassay applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Improved performances on surface‐enhanced Raman scattering based on electrochemically roughened gold substrates modified with SiO2 nanoparticles

In this work, we use electrochemical oxidation–reduction cycles (ORC) methods to prepare surface‐enhanced Raman scattering (SERS)‐active gold substrates modified with SiO₂ nanoparticles to improve the corresponding SERS performances. Based on the modified substrates, the SERS of Rhodamine 6G (R6G) exhibits a higher intensity by 3‐fold of magnitude, as compared with that of R6G adsorbed on a SERS‐active Au substrate without the modification of SiO₂ nanoparticles. Moreover, the SERS enhancement capabilities of the modified and the unmodified Au substrates are seriously destroyed at temperatures higher than 250 and 200 °C, respectively. These results indicate that the modification of SiO₂ nanoparticles can improve the thermal stability of SERS‐active substrates. The aging in SERS intensity is also depressed on this modified Au substrate due to the contribution of SiO₂ nanoparticles to SERS effects. Copyright © 2009 John Wiley & Sons, Ltd.     

The role of the dielectric environment in surface‐enhanced Raman scattering on the detection of a 4‐nitrothiophenol monolayer

Nanotechnology enables the generation and characterization of novel surface‐enhanced Raman scattering (SERS) substrates. In this study, we focus on the impact of the carrier material of the SERS active layer and hence the dielectric environment to the enhancement. Therefore, a self‐assembled monolayer of 4‐nitrothiophenol is immobilized on silver and gold particles substrates on a quartz carrier. The detection of the monolayer occurs through the quartz carrier and through air. For the former, an increase of the intensity of the SERS bands in the spectrum is observed compared to the latter. The magnitude of the increase is larger for gold than for silver. Calculations according to the theoretical model of the electromagnetic enhancement agree with our experimental data. The presented detection mode will stimulate the fabrication of novel SERS sensors. Copyright © 2013 John Wiley & Sons, Ltd.     

Microwave monitoring of silver nanoparticle sintering for surface‐enhanced Raman scattering substrates

One of the most widely used methods for surface‐enhanced Raman scattering (SERS) employs silver or gold nanoparticles either in colloidal suspension or in the dry‐drop form. In such substrates the SERS amplification factors depend critically on the interparticle distances. Here, we report that microwave absorption as a function of temperature in dry‐drop substrates can be used as a probe to demarcate temperature regions for thermal annealing to produce SERS substrates with very high amplification factors. Copyright © 2011 John Wiley & Sons, Ltd.     

金纳米颗粒阵列基底的化学置换制备及其表面增强拉曼散射特性研究

表面增强拉曼(SERS)作为一种分析手段,具有高灵敏度、高选择性、高重复性、非破坏性等优点,在过去的几十年中,被广泛应用在成分检测、环境科学、生物医药及传感器等领域。其中以金、银等贵金属纳米颗粒薄膜在表面增强拉曼(SERS)活性基底方面得到了更为广泛的应用。SERS技术一个关键的因素是如何制设计并备具有大面积、高增强能力及高重复性、可循环使用的SERS基底。通常,贵金属纳米颗粒规则阵列结构的单元颗粒电磁增强特性及其颗粒间的电磁耦合增强特性的综合作用可大力提升SERS基底的探测性能。然而,利用传统微纳米加工方法如光刻、电子束光刻等方法制备得到的贵金属纳米阵列结构的表面粗糙度不够理想。结合光刻与化学置换方法制备金纳米颗粒四方点阵列孔洞结构,并研究其作为SERS基底的电磁增强特性。具体研究利用光刻法在硅衬底上制备了规则排列的四方点阵列孔洞结构,用磁控溅射在其表面镀上金属铁膜;接着在衬底上旋涂浓度为1.893 8 mol·L-1的氯金酸液膜,在孔洞内铁和氯金酸发生置换反应,进而孔洞生成金纳米颗粒,最终得到金纳米颗粒四方点阵SERS活性基底。采用罗丹明6G(R6G)分子作为探测分子测试不同金纳米颗粒阵列结构基底的SERS谱。实验结果表明,随着化学置换反应时间的延长,金纳米颗粒排列更加紧凑有序,SERS谱增强性能更好。     

Comparison of SERS effectiveness of copper substrates prepared by different methods: what are the values of enhancement factors?

Surface‐enhanced Raman scattering (SERS) spectroscopy is an analytical method for the detection of low amounts of analytes adsorbed on an appropriate coinage metal (Au, Ag, Cu) surface. Generally, the values of the enhancement factor are the highest on silver, lower on gold and relatively very low on copper. In this study, we have focused on the estimation of the enhancement factors of copper surface/substrates formed by different preparation procedures. The SERS activity of large electrochemically prepared substrates and colloidal systems is compared. The surface morphology of the large substrates was studied using scanning electron microscopy and atomic force microscopy. The size distribution of colloidal nanoparticles was monitored by dynamic light scattering. The values of enhancement factor are in both cases more than 10⁵ for the FT‐SERS spectra, demonstrating the fundamental role of nanostructured copper as a substrate material at the excitation wavelength (1064 nm) used. Copyright © 2011 John Wiley & Sons, Ltd.     

Drawing‐fabrication of multifarious nanoplasmonic platform on PLLA paper for optimized SERS performance

A simple and efficient pen‐on‐paper approach is designed to prepare hydrophilic surface enhanced Raman scattering (SERS)‐active lines by directly writing on a piece of hydrophobic poly (L‐lactic acid) nanofibrous paper using a pen filled with plasmonic nanoparticle ink. The pen‐on‐paper‐line SERS substrate exhibits hydrophobic–hydrophilic focusing effects together with negligible background interference, high sensitivity, good reproducibility, and long‐term stability. Furthermore, just by drawing three different plasmonic nanoparticles, the SERS activity is optimized for different molecules. Considering the complex factors involved in SERS effects of real analytes, our results provide an efficient strategy to produce optimized SERS substrates with multiple plasmonic nanoparticles. Copyright © 2016 John Wiley & Sons, Ltd.     

Thiol‐immobilized silver nanoparticle aggregate films for surface enhanced Raman scattering

We report a novel method for the fabrication of films of silver nanoparticle aggregates that are strongly attached to Si substrates (Thiol‐immobilized silver nanoparticle aggregates or TISNA). The attachment is achieved by chemically modifying the surface of a Si(100) surface in order to provide SH groups covalently linked to the substrate and then aggregating silver nanoparticles on these thiol covered surfaces. The transmission electron microscopy (TEM), scanning electron microscopy (SEM) and atomic force microscopy (AFM) characterization show a high coverage with single nanoparticles or small clusters and a partial coverage with fractal aggregates that provide potential hot spots for surface enhanced Raman scattering (SERS). We have confirmed the SERS activity of these films by adsorbing rhodamine 6G and recording the Raman spectra at several concentrations. By using the silver‐chloride stretching band as an internal standard, the adsorbate bands can be normalized in order to correct for the effects of focusing and aggregate size, which determine the number of SERS active sites in the focal area. This allows a quantitative use of SERS to be done. The adsorption–desorption of rhodamine 6G on TISNA films is reversible. These features make our TISNA films potential candidates for their use in chemical sensors based on the SERS effect. Copyright © 2008 John Wiley & Sons, Ltd.     

银和去合金银-金纳米粒子的SERS活性研究

用乙二醇还原硝酸银,聚乙烯吡咯烷酮作表面活性剂合成了大量的银纳米颗粒。银纳米颗粒和HAuCl4发生置换反应后形成去合金银-金纳米粒子。以吡啶和SCN-作为探针分子研究了它们的SERS活性。结果表明,当探针分子吸附于银纳米颗粒和去合金银-金纳米粒子上时,探针分子的特征振动峰强度增强、频率发生位移。SERS可表征纳米粒子物理和化学性质的变化。     

Surface enhanced Raman spectroscopic readout on heavy metal ions based on surface self assembly

A new method is reported for detecting heavy metal ions by using the self assembled monolayer (SAM) technique and surface enhanced Raman spectroscopy (SERS). The p‐mercaptobenzoic acid (MBA) served as the SERS readout molecule and the modified tag to attach on the smooth gold substrate as well as the tag of nanoparticles by the SAM method. Two carboxyl groups from MBA molecules which were attached respectively to gold substrate and gold nanoparticles were linked through the heavy metal ions (Cu²⁺, Pb²⁺ and Zn²⁺) as bridge, and thus sandwich structure of ‘MBA modified gold substrate/heavy metal ions/MBA modified gold nanoparticles’ was built for detection. The observation of the oxidation peak of metal nanoparticles from cyclic voltammetry (CV) curve, gold nanoparticles from scanning electron microscopy (SEM) images and SERS signal of MBA from the sandwich structure indicated the existence of heavy metal ions. The difference in the wavenumbers of vibrational modes from MBA in the sandwich structure constructed by different could be used to identify different heavy metal ions. The assembled structure was rinsed by strong chelator of EDTA solution to remove the heavy metal ions from the sandwich structure and thus to obtain a fresh gold substrate modified with MBA for the cyclic detection. Copyright © 2007 John Wiley & Sons, Ltd.     

A comparative study of surface‐enhanced Raman scattering from silver‐coated anodic aluminum oxide and porous silicon

Three types of Ag‐coated arrays from porous anodic aluminum oxide (AAO) were prepared and studied as substrates for surface‐enhanced Raman scattering (SERS). They were compared with Ag‐coated porous silicon (PSi) samples. AAO‐based substrates were prepared by the vapor deposition of silver directly onto the surface of porous AAO with different morphologies of the pores, whereas SERS‐active island films on the PSi were prepared by immersion plating. The resulting metallic nanostructures were characterized by UV‐vis absorption spectroscopy and scanning electron microscopy (SEM). Thermal evaporation leads to the formation of granular arrays of Ag nanoparticles on the surface of AAO. SERS activity of the substrates was tested using water‐soluble cationic Zn(II)‐tetrakis (4‐N‐methylpyridyl) porphyrin (ZnTMPyP4) as a probe molecule. The results indicate that all AAO‐based substrates studied here exhibit some degree of SERS activity. Noteworthy, for excitation at 532 nm, signals from AAO‐based substrates were comparable with those from the PSi‐based ones, whereas for 441.6 nm excitation they were about twice higher. The strongest SERS‐enhancement at 441.6 nm excitationwas provided by the AAO substrates with silver deposited on the monolith (originally nonporous) side of AAO. Preferential SERS‐enhancement of the bands ascribed to the vibrations of the N‐methylpyridinium group of ZnTMPyP4 when going to blue excitation was found. Copyright © 2010 John Wiley & Sons, Ltd.     

以PAA为模板制备SERS基底及对三聚氰胺的检测

采用热蒸镀的方法直接在多孔氧化铝(porous anodic alumina,PAA)模板上蒸镀几微米的银膜,然后在HCl溶液中溶解掉模板,得到表面具有纳米尺度规则结构的银膜作为表面增强拉曼散射(surface-en-hanced Raman spectra,SERS)基底,并在该基底上测量了吡啶溶液(0.01 mol.L-1)的增强拉曼光谱,发现平均增强因子大于105。与直接在载玻片上蒸镀的银膜相比,具有纳米尺度规则结构银膜的增强效果提高了30倍。改变激发光功率测量吡啶的拉曼光谱,和普通拉曼散射一样,增强拉曼光谱的峰值强度随激发光强度线性变化,并在该基底上测量了三聚氰胺的拉曼光谱,发现在1 mW的激发功率下对于三聚氰胺的检出限为2.5 mg.L-1。     

自组装银纳米粒子及其SERS增强效应

采用柠檬酸三钠还原硝酸银方法制备出银纳米粒子, 并通过在玻璃表面修饰3-氨基丙基-三乙氧基硅烷( APTES)对银纳米粒子进行自组装。利用紫外-可见(UV-Vis)吸收光谱和扫描电子显微镜(SEM)测试手段对样品进行分析和表征。由测试结果可知银纳米粒子的尺寸比较均匀, 组装致密度较高, 基本以亚单层的形式分布于基底表面。进一步研究了以结晶紫(CV)为探针分子的自组装基底的表面增强拉曼光谱(SERS), 计算发现该基底的拉曼增强因子数量级达106。结果表明: 银纳米粒子自组装基底具有良好的SERS增强效应, 为痕量CV的检测提供了有效的方法。     

玻璃基底上不规则银纳米结构的生长及其光学性质的研究

以经过硅烷化后玻璃片为基底，之后吸附金纳米种子，采用柠檬酸钠为还原剂，在荧光灯照射条件下还原硝酸银，制备出基底表面具有银纳米粒子聚集结构的材料。采用透射电镜、扫描电镜和紫外可见分光光度计对产物的形貌和性质进行了表征，并考察银纳米粒子的形貌对其薄膜基底SERS活性的影响。结果表明：随着光照时间增加至16 h，金种子长大为平均粒径110 nm的不规则状多晶银纳米粒子，且出现双层粒子堆积。基底上纳米粒子的吸收光谱上出现了由银粒子的表面等离子体激元偶极子耦合引发的强烈吸收峰：随着光照时间的变化，耦合峰在600～813 nm波段内移动。光照时间为12 h后得到的SERS活性基底具有最强的SERS信号。