Sedimentation as a tool for crystallization from protein mixtures

Crystals from apoferritin which is an iron‐free form of protein ferritin were obtained from protein mixtures lysozyme/apoferritin using sedimentation under high gravity. Solution containing apoferritin at concentration as high as 5mg/ml in the presence of 25mg/ml lysozyme and overlaid on 5%(w/v) CdSO₄ in 0,2M/L NaAC, pH=5 still favors apoferritin crystal formation under normal gravity conditions, but at apoferritin concentrations <0,5mg/ml (∼1,14µM/L) in 25mg/ml (∼1,71mM/L) lysozyme only the sedimentation in a centrifuge appears to be useful for separating the apoferritin molecules from the mixture followed by apoferritin crystallization in the same system. The very high molecule number ratio (∼1:10³) of two proteins is used to stress on the observed effect. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Direct AFM observations of impurity effects on a lysozyme crystal

Impurity effects on the growth of tetragonal lysozyme crystals have been studied using in situ atomic force microscopy. Commercially available hen egg white lysozyme was characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis with silver staining, and purified by re-crystallization and successive high pressure liquid chromatography. On the (1 1 0) crystal surface, there was no significant difference in morphology between crystals grown in commercial and in purified solutions. On the (1 0 1) surface, however, a large number of small particles were found when the crystal was grown in the commercial solution, while the surface grown in the purified solution was quite smooth. Among the typical residual impurities contained in commercial lysozyme, only covalently bound lysozyme dimer yielded such particles. From measurements of particle separation and an estimate of the critical nucleation size, we infer that the particles reduced the step velocity according to the mechanism described by Cabrera et al. [N. Cabrera, D.A. Vermilyea, in: R.H. Doremus et al. (Eds.), Growth and Perfection of Crystals, 1958, P. 393].     

Kinetics of crystal growth of mirabilite in aqueous supersaturated solutions

The crystallization of sodium sulfate decahydrate (Na₂SO₄·10H₂O, mirabilite) from supersaturated solutions was investigated using stable supersaturated solutions seeded with mirabilite seed crystals. The experiments were done in batch, stirred reactors in which the supersaturated solutions were prepared either by dissolution of sodium sulfate anhydrous at 32 °C followed by cooling to 18 or 20 °C or by mixing equal volumes of equimolar ammonium sulfate and sodium hydroxide solutions at 20 °C. Inoculation of the solutions supersaturated only with respect to mirabilite with seed crystals was accompanied with temperature increase of the thermostated solution. Despite the fact that crystal growth was initiated with seed crystals, the process started past the lapse of induction times inversely proportional to the solution supersaturation. The rates of crystal growth were measured both from the temperature rise and from the concentration–time profiles, which were linearly correlated. The measured crystal growth rates showed a parabolic dependence on supersaturation at low supersaturations. For higher values this dependence changed to linear, a behavior consistent with the BCF spiral crystal growth model. The morphology of the crystals growing at 20 °C showed typical prismatic habit, while at 18 °C when crystallized from cooled sodium sulfate solutions changes in the crystal habit to a leaf like morphology were observed.     

Solubility of tetragonal and orthorhombic lysozyme crystals under high pressure

Two-beam interferometry was applied to measure lysozyme solubility under high pressure. This rapid method allowed determination of one data point within 3 h. The solubility of tetragonal lysozyme crystals was determined as a function of temperature at 0.1, 50, and 100 MPa, and that of orthorhombic crystals was measured at 0.1 and 100 MPa. The solubility of tetragonal crystals increased with pressure; however, that of orthorhombic crystals decreased. In both cases, the enthalpy and entropy of dissolution decreased with pressure.     

Microbatch macromolecular crystallization in micropipettes

A microbatch crystallization method suitable for macromolecular crystal growth is described. Solutions in the 1 μl range are set up in micropipettes with very small inner diameter. The packaging is robust, compact and neat. Surface area of solution exposed to the atmosphere is much smaller than in a hanging drop vapor diffusion experiment. Small sample volumes make the packaging ideal for screening experiments, but crystals large enough for diffraction studies can be grown in, and recovered from, the micropipettes.     

Orientation of protein crystals grown in a magnetic field

Three crystal forms of hen egg-white lysozyme, and ribonuclease A and met-myoglobin crystals exhibited orientation in a magnetic field of <1 T. Magnetic field application is thus shown to be a possible means to orient protein crystals. The conditions for the orientation to occur and some of its applications are discussed.     

Second virial coefficient: variations with lysozyme crystallization conditions

Interparticle lysozyme interactions in solution have been studied by small angle X-ray scattering (SAXS) as a function of salt type (NaCl, NaNO₃, NaSCN and NaOAc), salt concentration, and as a function of temperature between 30°C and 10°C. The choice of conditions was made to cover variations from (undersaturated) solutions to (supersaturated) crystallization conditions. The second virial coefficients (A₂) were determined from the X-ray structure factors extrapolated to the origin, as a function of protein concentration. The A₂ values which correspond to lysozyme crystallization conditions were found to be in a range from about zero to −8.0×10⁻⁴ mol ml g⁻², in agreement with previous determinations by other groups. The variations of the second virial coefficient from positive (repulsive interactions) to negative (attractive interactions) were found to follow the efficiency of salts to induce crystallization. The choice of the second virial coefficient as a tool to predict crystallization conditions is discussed.     

Single crystal growth from the melt and magnetic properties of hexaferrites–aluminates

Single crystals of aluminum substituted barium hexaferrite were grown by the floating zone method with optical heating. Single crystals were produced from a melt of stoichiometric composition. The process was carried out under a pressure of 50 atm of oxygen. In the system BaO–(x)Al₂O₃–(6?x)Fe₂O₃ the region of single phase crystal growth from the melt is limited by the value x=3. For higher substitutions single-phase crystallization is not observed. The grown single crystals are cylindrical boules with a diameter of 4–5 mm and with lengths up to 50 mm. To avert cracking the crystals have been annealed during the process of growth at 1100 °C. The content of FeO in the composition of single crystals of barium hexaferrite, grown by zone melting under an oxygen pressure of 50 atm, is approximately 0.3 wt%. In the system of hexaferrite–aluminates the macroscopic magnetic moment of the material disappears at x=3.     

Influence of Bi2O3 content on the crystallization behavior of TeO2–Bi2O3–ZnO glass system

Glass ceramic materials with composition 75TeO₂–xBi₂O₃–(25-x)ZnO (x = 13, 12, 11) possessing transparency in the near- and mid-infrared (MIR) regions were studied in this paper. It was found that as the Bi₂O₃ content increased in the glass composition, the observed crystallization tendency is enhanced, and high crystal concentrations were obtained for the glasses with high Bi₂O₃ content while maintaining transparency in the MIR region. Crystal size in the glass ceramic was reduced by adjusting the heat treatment conditions; the smallest average size obtained in this study is 700 nm. Bi_0.864Te_0.136O_1.568 was identified using X-ray Diffraction (XRD) and found to be the only crystal phase developed in the glass ceramics when the treatment temperature was fixed at 335 °C. The morphology of the crystals was studied using Scanning Electron Microscopy (SEM), and crystals were found to be polyhedral structures with uniform sizes and a narrow size distribution for a fixed heat treatment regime. Infrared absorption spectra of the resulting glass ceramics were studied. The glass ceramic retained transparency in the infrared region when the crystals inside were smaller than 1 μm, with an absorption coefficient less than 0.5/cm in the infrared region from 1.25 to 2.5 μm. The mechanical properties were also improved after crystallization; the Vickers Hardness value of the glass ceramic increased by 10% relative to the base glass.     

Layered crystals of apo‐ and holoferritin grown by alternating crystallization

We report on the use of alternating crystallization for deposition of layers of different (though closely related) proteins in a single crystal. Investigations were carried out with the unique protein couple consisting of two forms of ferritin, apoferritin and holoferritin from horse spleen, which, despite being of quite different molecular masses, still possess identical organic shells. Crystals of both proteins were used as substrates for subsequent contiguous growth of the partner protein in perfect alignment. We observed continuous growth of combined (onion‐like) single crystals; artificial structures of biological macromolecules can be designed in this way. The homoepitaxial layered growth shows in an unambiguous way that protein crystallization depends only on the surface protein conformation and amino‐acid composition, but not on the internal molecule structure. The limitations of protein crystal growth for designing layered structures of biological macromolecules were revealed by growing of heterogeneous protein crystals onto pre‐existing protein crystalline substrates. Tetragonal crystals of hen egg‐white lysozyme were grown onto cubic apoferritin crystals used as substrates. It was observed that the lysozyme crystals were not lattice‐matched to the ‘host’ apoferritin crystals; this led to mere aggregates of different crystals. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystallization of multiple forms of bovine seminal ribonuclease in the liganded and unliganded state

Bovine seminal ribonuclease (BS-RNase) is an intriguing homodimeric enzyme which exists as two conformational isomers, characterized by distinct catalytic and biological properties, referred to as M×M and M=M. Reduction of inter-chain disulfide bridges produces a stable monomeric derivative (M) which is still active. This paper reports the screening and optimization of crystallization conditions for growing single diffraction-quality crystals for the various BS-RNase forms. The crystallization trials were performed using both the vapor diffusion and microbatch methods. The M×M dimer was crystallized in the free form from polyethylene glycol (PEG) 4000 at pH 8.5 and as a complex with the substrate analog uridylyl(2′– 5′)guanosine (UpG) from an unbuffered ammonium sulfate (AS) solution. These two crystal types diffract X-rays to 2.5 and 1.9 Å resolution, respectively. Two different crystal types were obtained both for the M=M dimer and for the monomeric derivative. (M=M)a crystals, grown from PEG 4000 (8% w/v) at pH 5.6, diffract X-rays to 4.0 Å. At higher PEG concentration (15% w/v) a different crystal type was obtained, (M=M)b, which showed a better diffraction limit (2.5 Å). For the monomer, type (M)a and (M)b crystals, diffracting X-rays to 2.5 Å resolution, were obtained from AS at pH 6.5 and from PEG 4000 at pH 8.5, respectively. A comparison with previously crystallized forms of the dimer M×M and its complexes with uridylyl(2′–5′)adenosine and 2′-deoxycytidylyl(3′–5′)-2′-deoxyadenosine is also presented. The three-dimensional structure analysis of (M×M)·UpG and (M=M)b is in progress.     

Studies on conventional and Sankaranarayanan–Ramasamy (SR) method grown ferroelectric glycine phosphite (GPI) single crystals

Transparent single crystals of glycine phosphite were grown by Sankaranarayanan–Ramasamy (SR) method and conventional slow evaporation solution technique (SEST) which had the sizes of 100 mm in length, 30 mm diameter and 10×11×8 mm³. The conventional slow evaporation and Sankaranarayanan–Ramasamy method grown glycine phosphite single crystals were characterized using laser damage threshold, chemical etching, Vickers microhardness, UV–vis–NIR and dielectric analysis. The laser damage threshold value was higher in SR method grown GPI crystal as against conventional method grown crystal. The SR method grown GPI has higher hardness and also higher transmittance compared to conventional method grown crystal. The chemical etching and dielectric loss measurements indicate that the crystal grown by SR method has low density of defects and low value of dielectric loss compared to conventional method grown GPI crystal.     

Assembling ultra-thick and crack-free colloidal crystals via an isothermal heating evaporation induced self-assembly method

Ultra-thick and crack-free colloidal crystals have many advantages in a number of existing and emerging applications. In this work, such systems are fabricated by a simple and reproducible method based on assembly of monodisperse silica particles by a crystalline layer assembly technique (CLAT). We find that high quality of colloidal crystals is obtained by using two simple processes: sintering of silica particles and thermal treatment of colloidal crystals. The crack-free colloidal crystal with a thickness of 100 μm is fabricated. The morphologies and microstructures of colloidal crystals are identified by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The reflection spectra are measured by UV-VIS spectrum measurement. The reflection spectra of the colloidal crystal with different thicknesses are calculated by using multiple scattering methods. When the thickness of the colloidal crystal is smaller than 60 μm, the reflection spectra of experimental measurements agree very well with that of theoretical calculations.     

A more clear insight of the lysozyme crystal composition

Crystallization can be used as a purification method for proteins. Lysozyme was chosen as a model substance. Changing crystallization conditions will lead as shown to different lysozyme crystal morphologies with different properties. Beside others, lysozyme crystals can show a Tetragonal, High Temperature and Low Temperature Orthorhombic crystal morphology. Experiments such as conductivity measurements, pH tests, chloride detection tests, experiments using methylene blue as a dye and dissolution experiments were carried out to investigate the composition of the lysozyme crystals. It is proven that lysozyme crystals are made up of the initial buffer solution components: lysozyme (the protein), water which is part of the crystal lattice, salt ions which are attached to the protein molecule and voids filled with the buffer solution containing the crystallization agent (e.g. salt). Interesting dissolution behaviours of the lysozyme crystals were observed which are not described so far elsewhere (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Corrosion and crystallization at the inner surfaces of glass bricks

Glass bricks are important transparent building materials. They are produced by joining two halves of glass pressings at 600–700 °C. During this production process alkali oxides evaporate and are redeposited at the cooler inner front surfaces of the bricks. This surface layer reacts with H₂O and CO₂ from the residual brick atmosphere, leading to the formation of an alkali-rich silicate-hydrate layer of ?50 nm thickness, which could be evidenced leading to a reduced nano-hardness of similar thickness, and from which NaHCO₃ crystals can finally grow. Climate chamber experiments (repeated cooling between at ?8 and ?14 °C and reheating to 0 to 15 °C) resulted in reversible NaHCO₃ crystallization and redissolution, presumably influenced by water evaporation or condensation and driven by the NaHCO₃ supersaturation of the silicate-hydrate layer. Depending on the time–temperature schedule, different crystal morphologies became visible in this closed system, e.g. isolated spherical crystals, crystals arranged in chains and in double-chains, respectively, which can limit already the transmittance of the glass bricks. When a crack occurs or the brick is opened, the hygroscopic NaHCO₃ crystals take up more H₂O from the ambient, react irreversibly with the glass surface, finally leading to a total loss of transmittance.     

Lower dimer impurity incorporation may result in higher perfection of HEWL crystals grown in microgravity: A case study

Crystals of tetragonal hen egg white lysozyme (HEWL) grown on a series of space missions and their terrestrial counterparts were analyzed by gel electrophoresis and X-ray diffraction. The crystals were produced by vapor-diffusion and dialysis methods. The microgravity and terrestrial grown HEWL crystals were found to have effective partitioning coefficients (K_eff) for an oxidatively formed covalent dimer impurity (MW 28 K) of 2 and 9, respectively, i.e. the latter contain 4.5 times more dimers. The microgravity grown crystals allowed the collection of 24% more useful reflections and improved the resolution from 1.6 to 1.35 Å. Other improvements were also noted including lower isotropic B-factors of 16.9, versus 23.8 Å² for their terrestrial counterparts. High-resolution laser interferometry was applied quantitatively to evaluate the influence of dimer impurity on growth kinetics. It is shown that the growth of the (1 0 1) face from solution into which 1% dimers were introduced decelerates with increasing solution flow rate and the growth stops at a flow rate of about 0.2 mm/s. This effect occurs faster than in ultrapure solutions. The covalently bound dimers essentially increase the amplitudes of the striation-inducing growth rate fluctuations. The effect is ascribed to the enhanced transport of growth inhibiting HEWL dimer to the interface. Theoretical analysis shows that a stagnant solution around a growing crystal is strongly depleted with respect to impurity by about 60% for the measured growth parameters as compared to the solution bulk. Thus, a crystal in microgravity grows from essentially purer solution than the ones in the presence of convection flows. Therefore, it traps less stress inducing impurity and should be more perfect. For crystal/impurity systems where K_eff is small enough microgravity should have an opposite effect.     

Vertical Bridgman growth and characterization of large ZnGeP2 single crystals

The growth of ZnGeP₂ crystals by seeded Vertical Bridgman method was studied. High-quality near-stoichiometric ZnGeP₂ single crystals obtained were of 20–30 mm in diameter and 90–120 mm in length. By selection of the seed crystallographic orientation the single crystal ingots without cracks and twins were grown, as shown by X-ray diffraction. The infrared transmission property of the ZnGeP₂ crystals was studied by the calculated optical absorption coefficient spectra. The results showed that after thermal annealing of the crystals the optical absorption coefficient was ～0.10 cm^?1 at 2.05 μm, and ～0.01 cm^?1 at 3–8 μm. The rocking curves patterns of the (4 0 0) reflection demonstrated that the as-grown single crystals possessed a good structural quality. The composition of the crystals was close to the ideal stoichiometry ratio of 1:1:2. The low-loss typical ZnGeP₂ samples of 6 mm×6 mm×15 mm in sizes were cut from the annealed ingots for optical parametric oscillation experiments. The output power of 3.2 W was obtained at 3–5 μm when the incident pumping power of 2.05 μm laser was 9.4 W, and the corresponding slope efficiency and the conversion efficiency were 44% and 34%, respectively.     

Crystallization kinetics of 1Na2O · 2CaO · 3SiO2 · glass monitored by electrical conductivity measurements

We investigated the kinetics of crystal nucleation, growth, and overall crystallization of a glass with composition close to the stoichiometric 1Na₂O · 2CaO · 3SiO₂. The nucleation and subsequent growth of sodium-rich crystals in this glass decreases the sodium content in the glassy matrix, drastically hindering further nucleation and growth. Compositional changes of the crystals and glassy matrix at different stages of the crystallization process were determined by EDS. These compositional variations were also monitored by electrical conductivity measurements, carried out by impedance spectroscopy, in glassy, partially, and fully crystallized samples. The electrical conductivity of both crystalline and glassy phases decreases with the increase of the crystallized volume fraction. Starting at a crystallized volume fraction of about 0.5, the crystalline phase dominates the electrical conductivity of the sample. This behavior was corroborated by an analysis of the activation energy for conduction. We show that electrical conductivity is highly sensitive and can indicate compositional shifts, changes in the spatial distribution of mobile ions in the glassy matrix. Conductivity measurements are thus a powerful tool for the investigation of complex heterogeneous systems, such as partially crystallized glasses and glass-ceramics.     

Sinter-crystallization of a glass obtained from basaltic tuffs

Glass-ceramic materials, obtained by sinter-crystallization of melted alkaline-olivine basaltic tuffs, were investigated. The kinetics of bulk crystallization was evaluated by differential thermal analysis (DTA) at different heating rates. The phase formation and the sintering behavior of glass powders (<75 μm) were studied in air and in nitrogen atmospheres by DTA and dilatometry, respectively. The crystalline phases formed were identified by X-ray diffraction. The DTA traces showed an unusual phase formation behavior with a higher crystallization trend for the bulk samples. The crystallization activation energy was evaluated as 590 ± 20 kJ/mol in the range 1080–1110 K. A value of about 3 of the Avrami constant, corresponding to three-dimensional growth on a fixed number of nuclei, was evaluated by Ozawa and Augis–Bennet methods. The densification at low-temperatures is reduced by the intensive crystallization process in both air and nitrogen atmospheres. The sintering starts again at 1150–1250 K. In air atmospheres, due to the FeO oxidation, the sintering temperature increases and the percentage of formed crystal phase decreases by 15–20%.