Synthesis,Characterization, and X‐ray Crystal Structures of (Diphosphine)Ni(dmit) and (Diphosphine)Ni(dmio) (Diphosphine = dppv,dppb) Complexes

Four complexes with the ligands dmit and dmio were synthesized. Reaction of (PhCO)₂(dmit) and (PhCO)₂(dmio) with MeONa afforded the intermediates 2‐thioxo‐1,3‐dithiole‐4,5‐dithiolate dianion and 2‐oxo‐1,3‐dithiole‐4,5‐dithiolate dianion, respectively. Reaction of the two dianions with (diphosphine)NiCl₂ [diphosphine = (Z)‐1, 2‐bis(diphenylphosphanyl)ethane (dppv), 1,2‐bis(diphenylphosphanyl)benzene (dppb)] gave (dppv)Ni(dmit) ( 1 ), (dppb)Ni(dmit) ( 2 ), (dppv)Ni(dmio) ( 3 ), and (dppb)Ni(dmio) ( 4 ). This synthesis route was found to be an efficient pathway to prepare dmit and dmio ligand complexes. Complexes, 1 – 4 were fully characterized by elemental analysis and IR, ¹H NMR, ¹³C NMR, and ³¹P NMR spectroscopy. In addition, the molecular structures of 1 , 3 and 4 were established by X‐ray diffraction.     

Preparation and electrochemical and optical properties of unsymmetrically substituted phthalocyanines with one or two trithiole rings and related symmetric derivatives

4,5-Bis(benzylthio)-3,6-diethylphthalonitrile (1) was mixed with 4 -t-butylphthalonitrile and then treated with lithium alkoxide in n-hexanol to produce the corresponding unsymmetrically substituted phthalocyanines (2) and (3) with two or four benzylthio groups, respectively. Treatment of phthalocyanine (2) with nickel(II) acetate yielded the corresponding metal complex 2-Ni. Two benzyl groups of 2 and 2-Ni were removed with lithium/THF/ammonia at -78 degrees C under argon, and the dithiolate anions generated were then reacted with elemental sulfur to give monotrithiolophthalocyanines (5) and (5-Ni). A similar treatment of 3 produced bistrithiolophthalocyanine (6). Tetrakistrithiolophthalocyanine (7-Ni) was prepared by complexation of phthalocyanine (4) with nickel(II) acetate, followed by a Birch reduction of the resulting nickel(II) complex (4-Ni), and then sulfurization and cyclization of the octathiolate anions that were generated. The structures of the phthalocyanines were determined by (1)H NMR and matrix-assisted laser desorption ionization time-of-flight mass spectrometry. The optical and electrochemical properties of the phthalocyanines were examined by UV-vis absorption spectroscopy and cyclic voltammetry. Treatment of 5, 5-Ni, 6, 7, and 7-Ni with trifluoroacetic acid in chloroform generated positively charged species, which were characterized by UV-vis and/or NMR spectroscopy.     

New type of tetrazine‐substituted metallophthalocyanines by microwave irradiation: Synthesis and characterization

5,6‐bis(4‐methylphenyl)‐2,3‐dihydro‐1,2,3,4‐tetrazine 2 was synthesized by the dimerization of ethyl p‐methylbenzoateformylhydrazone 1 in hydrazinehydrate solution. 2,3‐bis(4‐methylphenyl)‐6,7,14,15‐tetrahydro[1,2,3,4]tetrazino [2,3d][1,8, 4,5]benzodithia‐diazecine‐10,11‐dicarbonitrile 4 was sythesized by cyclization reaction of tetrazine monomer 2 onto 1,2‐bis‐(2‐iodoethylmercapto)‐4,5‐dicyanobenzene 3 . Co(II) and Cu(II) phthalocyanine complexes were prepared by reaction of the dinitrile compound ( 4 ) with the chlorides of Co(II), Cu(II), and DMAE at 175°C, 350 W in a microwave oven for 10 min. Zn(II)‐phthalocyanine complex was prepared by reaction of the dinitrile compound 4 with the acetate of Zn(II) and DMAE at 175°C, 350 W in a microwave oven for 10 min. The new compounds were characterized by a combination of IR, ¹H‐NMR, ¹³C NMR, UV‐vis, elemental analysis, and MS spectral data. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:456–461, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20623     

Syntheses,Spectroscopic and DFT Studies of Two New D‐π‐A Compounds

Two novel 1,3‐dithiole‐2‐ylidene derivatives with a push–pull structures, 3‐(4,5‐dicarbomethoxy‐1,3‐dithiol‐2‐ylidene)naphthopyranone 1 and 3‐(4,5‐dimethylthio‐1,3‐dithiol‐2‐ylidene)naphthopyranone 2 , have been synthesized and characterized by ¹H NMR, IR, MS. The UV–vis spectra of 1 , 2 in CH₂Cl₂, the lowest‐energy absorption bands, are centered at 280, 316, and 430 nm for 1 and 284, 317, and 450 nm for 2 , respectively, which are caused by the HOMO → LUMO single electron promotion. Furthermore, the steady‐state fluorescence originating states of 1 , 2 from the excited charge‐transfer were observed. To estimate the position and energies of frontier orbitals for 1 , 2 , DFT calculations were performed using the Gaussian 03 program at the B3LYP/6‐31 G* level. The calculated vertical excitation energies are in good agreement with the experimental data. The high HOMO–LUMO gaps of 1 (3.08 eV) and 2 (3.00 eV) indicate high kinetic stability of the title compounds.     

Unsymmetrical Pyrene‐Fused Phthalocyanine Derivatives: Synthesis,Structure, and Properties

Novel pyrene‐fused unsymmetrical phthalocyanine derivatives 2,3,9,10,16,17‐hexakis(2,6‐dimethylphenoxy)‐22,25‐diaza(2,7‐di‐tert‐butylpyrene)[4,5]phthalocyaninato zinc complex Zn[Pc(Pz‐pyrene)(OC₈H₉)₆] ( 1 ) and 2,3,9,10‐tra(2,6‐dimethylphenoxy)‐15,18,22,25‐traza(2,7‐di‐tert‐butylpyrene)[4,5]phthalocyaninato zinc compound Zn[Pc(Pz‐pyrene)₂(OC₈H₉)₄] ( 2 ) were isolated for the first time. These unsymmetrical pyrene‐fused phthalocyanine derivatives have been characterized by a wide range of spectroscopic and electrochemical methods. In particular, the pyrene‐fused phthalocyanine structure was unambiguously revealed on the basis of single crystal X‐ray diffraction analysis of 1 , representing the first structurally characterized phthalocyanine derivative fused with an aromatic moiety larger than benzene.     

Synthesis of dithiafulvene–quinone donor–acceptor systems: isolation of a Michael adduct

π‐Conjugated donor–acceptor systems based on dithiafulvene (DTF) donor units and various acceptor units have attracted attention for their linear and nonlinear optical properties. The reaction between p‐benzoquinone and a 1,3‐dithiole phosphonium salt, deprotonated by lithium hexamethyldisilazide (LiHMDS), gave a product mixture from which the Michael adduct [systematic name: dimethyl 2‐(3‐hydroxy‐6‐oxocyclohexa‐2,4‐dien‐1‐ylidene)‐2H‐1,3‐dithiole‐4,5‐dicarboxylate], C₁₃H₁₀O₆S₂, was isolated. It is likely that one of the unidentified products obtained previously by others from related reactions could be a similar Michael adduct.     

Synthesis and comparison of the structure–property relationships of symmetric and asymmetric water‐soluble poly(p‐phenylene)s

Sodium salts of water‐soluble polymers poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(hexyloxy)‐1,4‐phenylene]} ( P1 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dodecyloxy)‐1,4‐phenylene]} ( P2 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dibenzyloxy)‐1,4‐phenylene]} ( P3 ), poly[2‐hexyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P4 ), and poly[2‐dodecyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P5 )] were synthesized with Suzuki coupling reactions and fully characterized. The first group of polymers ( P1 – P3 ) with symmetric structures gave lower absorption maxima [maximum absorption wavelength (λ_max) = 296–305 nm] and emission maxima [maximum emission wavelength (λ_em) = 361–398 nm] than asymmetric polymers P4 (λ_max = 329 nm, λ_em = 399 nm) and P5 (λ_max = 335 nm, λ_em = 401 nm). The aggregation properties of polymers P1 – P5 in different solvent mixtures were investigated, and their influence on the optical properties was examined in detail. Dynamic light scattering studies of the aggregation behavior of polymer P1 in solvents indicated the presence of aggregated species of various sizes ranging from 80 to 800 nm. The presence of alkoxy groups and 3‐sulfonatopropoxy groups on adjacent phenylene rings along the polymer backbone of the first set hindered the optimization of nonpolar interactions. The alkyl chain crystallization on one side of the polymer chain and the polar interactions on the other side allowed the polymers ( P4 and P5 ) to form a lamellar structure in the polymer lattice. Significant quenching of the polymer fluorescence upon the addition of positively charged viologen derivatives or cytochrome‐C was also observed. The quenching effect on the polymer fluorescence confirmed that the newly synthesized polymers could be used in the fabrication of biological and chemical sensors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3763–3777, 2006     

Phenyliodine(III) Bis(Trifluoroacetate) Mediated Synthesis of 2‐Aryl‐1,2‐Benzisothiazol‐3(2H)‐Ones in Ionic Liquid

Treatment of N‐aryl‐2‐(benzylthio)benzamides with phenyliodine(III) bis(trifluoroacetate) containing trifluoroacetic acid resulted in an interrupted Pummerer‐type reaction in ionic liquid 1‐n‐butyl‐3‐methylimidazolium hexafluorophosphate, [bmim][PF₆] to give 2‐aryl‐1,2‐benzisothiazol‐3(2H)‐ones rather than the normal Pummerer‐type products.     

New photoluminescent conjugated polymers with 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (DPP) and 1,4‐phenylene units in the main chain

A series of π‐conjugated polymers and copolymers containing 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (also known as 2,5‐dihydro‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐1,4‐dione) (DPP) and 1,4‐phenylene units in the main chain is described. The polymers are synthesised using the palladium‐catalysed aryl‐aryl coupling reaction (Suzuki coupling) of 2,5‐dihexylbenzene‐1,4‐diboronic acid with 1,4‐dioxo‐2,5‐dihexyl‐3,6‐di(4‐bromophenyl)pyrrolo[3,4‐c]pyrrole and 1,4‐dibromo‐2,5‐dihexylbenzene in different molar ratios. Soluble hairy rod‐type polymers with molecular weights up to 21 000 are obtained. Polymer solutions in common organic solvents such as chloroform or xylene are of orange colour (λ_max = 488 nm) and show strong photoluminescence (λ_max = 544 nm). The photochemical stability is found to be higher than for corresponding saturated polymers containing isolated DPP units in the main chain. Good solubility and processability into thin films render the compounds suitable for electronic applications.     

Synthese,Struktur und Charakterisierung von Titan‐, Zink‐, Nickel‐ und Palladium‐Thioether‐Thiolat‐Komplexen heterocyclischer 1,2‐Dithiolate

Synthesis, Structures, and Characterization of Titanium, Zinc, Nickel, and Palladium Thioether Thiolate Complexes of Heterocyclic 1,2‐Dithiolates Synthesis and properties of mixed ligand complexes of thioether thiolate ligands 4‐methylthio‐1,3‐dithiole‐2‐one‐5‐thiolate (dmidCH₃), 4‐methylthio‐1,3‐dithiole‐2‐thione‐5‐thiolate (dmitCH₃), and 4‐methylthio‐1,3‐dithiole‐2‐selone‐5‐thiolate (dmiseCH₃) are described. The x‐ray structures of CpTi(dmidCH₃)₂ (Cp′ = methylcyclopentadienyl), of two polymorphic structures of (tmeda)Zn(dmitCH₃)₂ [tmeda = 1,2‐bis(dimethylamino)ethane], of (dppe)Ni(dmitCH₃)₂, and (dppe)Pd(dmitCH₃)₂ [dppe=1,2‐bis(diphenylphosphino)ethane] are reported.     

A Facile synthesis of n,n′‐oligomethylenebis(4,5‐dihydrofuran‐3‐carboxamide)s using manganese(III)‐based radical cyclization of n,n′‐oligomethylenebis(3‐oxobutanamide)s with 1,1‐diarylethenes

The reaction of N,N′‐oligomethylenebis(3‐oxobutanamide)s with 1,1‐diarylethenes in the presence of manganese(III) acetate in acetic acid at 100° produced N N′‐oligomethylenebis(2‐methyl‐5,5‐diaryl‐4,5‐dihydrofuran‐3‐carboxamide)s. Similarly, the reaction of 3‐oxobutanamidoethyl 3‐oxobutanoate or N,N′‐(3,6‐dioxaoctamethylene)bis(3‐oxobutanamide) with 1,1‐diphenylethene gave (2‐methyl‐5,5‐diphenyl‐4,5‐dihydrofuran‐3‐amido)ethyl 2‐methyl‐5,5‐diphenyl‐4,5‐dihydrofuran‐3‐carboxylate or N,N′‐(3,6‐dioxa‐octamethylene)bis(2‐methyl‐5,5‐diphenyl‐4,5‐dihydrofuran‐3‐carboxamide) in moderate yields.     

Synthesis and Metal Complex Formation of a Bis(terpyridine) Derivative with a Phenylacetylene Framework

A new bis(terpyridine) derivative with a phenylacetylene framework was synthesized via a stepwise terpyridine construction strategy. The addition of ZnCl₂ to a solution of the bis(terpyridine) in chloroform resulted in UV/vis and ¹H NMR spectral changes because of complex formation.     

Synthesis and Characterization of New 7‐Substituted 6,14‐Ethenomorphinane Derivatives: N‐{5‐[(5α,7α)‐4,5‐Epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐yl]‐1,3,4‐oxadiazol‐2‐yl}arenamines

In this study, (5α,7α)‐4,5‐epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐carboxylic acid hydrazide ( 5 ) was synthesized by the condensation of methyl (5α,7α)‐4,5‐epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐carboxylate ( 4 ) with NH₂NH₂⋅H₂O. The (5α,7α)‐4,5‐epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐carboxylic acid 2‐[(arylamino)carbonyl]hydrazides 6a – 6q were prepared by the reaction of 5 with corresponding substituted aryl isocyanates, and the N‐{5‐[(5α,7α)‐4,5‐epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐yl]‐1,3,4‐oxadiazol‐2‐yl}arenamines 7a – 7q were obtained via the cyclization reaction of 6a – 6q in the presence of POCl₃. The synthesized compounds have a rigid morphine structure, including the 6,14‐endo‐etheno bridge and the 5‐(arylamino)‐1,3,4‐oxadiazol‐2‐yl residue at C(7) adopting the (S)‐configuration (7α). The structures of the compounds were confirmed by high‐resolution mass spectrometry (HR‐MS) and various spectroscopic methods such as FT‐IR, ¹H‐NMR, ¹³C‐NMR, APT, and 2D‐NMR (HETCOR, COSY, INADEQUATE).     

New Bis‐o‐Benzoquinoid Ligands with Ethylene Bridge and Their Metal Complexes

The treatment of di‐o‐quinone 4,4′‐(ethane‐1,2‐diyl)‐bis(3,6‐di‐tert‐butyl‐o‐benzoquinone) (Q–CH₂–CH₂–Q, 1 ) leads to its rearrangement to form di‐p‐quinomethide 4,4′‐(ethane‐1,2‐diylidene)bis(2‐hydroxy‐3,6‐di‐tert‐butyl‐cyclohexa‐2,5‐dienone) ( 2 ). The subsequent oxidation of 2 by an alkaline solution of K₃[Fe(CN)₆] yielded the new di‐o‐quinone 4,4′‐(ethene‐1,2‐diyl)bis(3,6‐di‐tert‐butyl‐o‐benzoquinone) (Q–CH=CH–Q, 3 ), which contains an ethylene bridge. The formation of mono‐ and poly‐reduced derivatives of 2 and 3 with potassium, thallium was studied by EPR technique. The dinuclear thallium derivative of 3 , Tl(SQ–CH=CH–SQ)Tl, was found to exist in the diamagnetic quinomethide form. The most stable derivatives of 2 and 3 are triphenyltin(IV) bis‐p‐quinomethide‐phenolate ( 4 ) and triphenylantimony(V) bis‐catecholate ( 5 ), which have been synthesized and isolated. The molecular structures of 2 , 3 , and 5 were characterized by single‐crystal X‐ray diffraction.     

Methyloxy Substituted Heteroleptic Bis(phthalocyaninato) Yttrium Complexes: Density Functional Calculations

The effects of alkyloxy substituents attached to one phthalocyanine ligand of three heteroleptic bis(phthalocyaninato) yttrium complexes Y(Pc)[Pc(α‐OCH₃)₄] ( 1 ), Y(Pc)[Pc(α‐OCH₃)₈] ( 2 ), and Y(Pc)[Pc(β‐OCH₃)₈] ( 3 ), as well as their reduction products {Y(Pc)[Pc(α‐OCH₃)₄]}^? ( 4 ), {Y(Pc)[Pc(α‐OCH₃)₈]}^? ( 5 ), and {Y(Pc)[Pc(β‐OCH₃)₈]}^? ( 6 ) [H₂Pc(α‐OCH₃)₄=1,8,15,22‐tetrakis(methyloxy)phthalocyanine; H₂Pc(α‐OCH₃)₈=1,4,8,11,15,18,22,25‐octakis(methyloxy)phthalocyanine; H₂Pc(β‐OCH₃)₈=2,3,9,10,16,17,23,24‐octakis(methyloxy)phthalocyanine] are studied by DFT calculations. Good consistency is found between the calculated results and experimental data for the electronic absorption, IR, and Raman spectra of 1 and 3 . Introduction of electron‐donating methyloxy groups on one phthalocyanine ring of the heteroleptic double‐deckers induces structural deformation in both phthalocyanine ligands, electron transfer between the two phthalocyanine rings, changes in orbital energy and composition, shift of electronic absorption bands, and different vibrational modes of the unsubstituted and substituted phthalocyanine ligands in the IR and Raman spectra in comparison with the unsubstituted homoleptic counterpart Y(Pc)₂. The calculations reveal that incorporation of methyloxy substituents at the nonperipheral positions has greater influence on the structure and spectroscopic properties of bis(phthalocyaninato) yttrium double‐deckers than at the peripheral positions, which increases with increasing number of substituents. Nevertheless, the substituent effect of alkyloxy substituents at one phthalocyanine ligand of the double‐decker on the unsubstituted phthalocyanine ring and on the whole molecule and the importance of the position and number of alkyloxy substituents are discussed. In addition, the effect of reducing 1 – 3 to 4 – 6 on the structure and spectroscopic properties of the bis(phthalocyaninato) yttrium compounds is also discussed. This systemic DFT study is not only useful for understanding the structure and spectroscopic properties of bis(phthalocyaninato) rare earth metal complexes but also helpful in designing and preparing double‐deckers with tunable structure and properties.     

Fused 1,2‐Dithioles. Part VII

The 1,2‐dithiolosultam derivative 14 was obtained from the (α‐bromoalkylidene)propenesultam derivative 9 (Scheme 1). Regioselective cleavage of the two ester groups (→ 1b or 2b ) allowed the preparation of derivatives with different substituents at C(3) in the dithiole ring (see 27 and 28 ) as well as at C(6) in the isothiazole ring (see 17 – 21 ; Scheme 2). Curtius rearrangement of the 6‐carbonyl azide 21 in Ac₂O afforded the 6‐acetamide 22 , and saponification and decarboxylation of the latter yielded ‘sulfothiolutin’ ( 30 ). Hydride reductions of two of the bicyclic sultams resulted in ring opening of the sultam ring and loss of the sulfonyl group. Thus the reduction of the dithiolosultam derivative 14 yielded the alkylidenethiotetronic acid derivative 33 (tetronic acid=furan‐2,4(3H,4H)‐dione), and the lactam‐sultam derivative 10 gave the alkylidenetetramic acid derivative 35 (tetramic acid=1,5‐dihydro‐4‐hydroxy‐2H‐pyrrol‐2‐one) (Scheme 3). Some of the new compounds ( 14, 22, 26 , and 30 ) exhibited antimycobacterial activity. The oxidative addition of 1 equiv. of [Pt(η²‐C₂H₄)L₂] ( 36a , L=PPh₃; 36b , L=1/2 dppf; 36c , L=1/2 (R,R)‐diop) into the S? S bond of 14 led to the cis‐(dithiolato)platinum(II) complexes 37a – c . (dppf=1,1′‐bis(diphenylphosphino)ferrocene; (R,R)‐diop={[(4R,5R)‐2,2‐demithyl‐1,3‐dioxolane‐4,5‐diyl]bis(methylene)}bis[diphenylphosphine]).     

Crystal structure and the role of cation group factor in the third‐order nonlinear optical properties of cadmium complexes constructed by 1,3‐dithiole‐2‐thione‐4,5‐dithiolato ligand

A cadmium complex bis(benzyltriethylammonium) bis(1,3‐dithiole‐2‐thione‐4,5‐dithiolato)‐cadmium(II) ((TEBA)₂[Cd(DMIT)₂]) has been synthesized and its crystal structure has been determined by means of X‐ray single‐crystal diffraction. The central cadmium(II) ion coordinates with two DMIT, which constructed a distorted tetrahedron environment. Its third‐order nonlinear optical properties have been studied using Z‐scan technique with 20 ps pulses at wavelength 1064 nm. Its third‐order nonlinear susceptibility χ⁽³⁾ value was determined to be 1.24 × 10⁻¹⁹ m² V⁻², the figure of merit, χ⁽³⁾/α₀, was estimated to be 2.64 × 10⁻²⁰ m³ V⁻². Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis,one‐ and two‐photon properties of poly[9,10‐bis(3,4‐bis(2‐ethylhexyl‐oxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐/2,7‐carbazolevinylene]

The synthesis, one‐ and two‐photon absorption (TPA) and emission properties of two novel 2,6‐anthracenevinylene‐based copolymers, poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐carbazolevinyl‐ene] ( P1 ) and poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinyl‐ene‐alt‐N‐octyl‐2,7‐carbazolevinylene] ( P2 ) were reported. The as‐synthesized polymers have the number‐average molecular weights of 1.56 × 10⁴ for P1 and 1.85 × 10⁴ g mol^?1 for P2 and are readily soluble in common organic solvents. They emit strong bluish‐green one‐ and two‐photon excitation fluorescence in dilute toluene solution (? _P1 = 0.85, ? _P2 = 0.78, λ_em( P1 ) = 491 nm, λ_em( P2 ) = 483 nm). The maximal TPA cross‐sections of P1 and P2 measured by the two‐photon‐induced fluorescence method using femtosecond laser pulses in toluene are 840 and 490 GM per repeating unit, respectively, which are obviously larger than that (210 GM) of poly[9,10‐bis‐(3,4‐bis(2‐ethylhexyloxy) phenyl)‐2,6‐anthracenevinylene], indicating that the poly(2,6‐anthracenevinylene) derivatives with large TPA cross‐sections can be obtained by inserting electron‐donating moieties into the polymer backbone. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 463–470, 2010     

Biodegradable polymers based on renewable resources. VII. Novel random and alternating copolycarbonates from 1,4:3,6‐dianhydrohexitols and aliphatic diols

Novel copolycarbonates containing 1,4:3,6‐dianhydro‐D ‐glucitol or 1,4:3,6‐dianhydro‐D ‐mannitol units, with various methylene chain lengths, were synthesized by bulk and solution polycondensations, of several combinations of carbonate‐modified sugar derivatives and aliphatic diols. Bulk polycondensations of 1,4:3,6‐dianhydro‐2,5‐bis‐O‐(phenoxycarbonyl)‐D ‐glucitol or 1,4:3,6‐dianhydro‐2,5‐bis‐O‐(phenoxycarbonyl)‐D ‐mannitol with four α,ω‐alkanediols having methylene chain lengths of 4, 6, 8, and 10, respectively, at 180 °C afforded the corresponding copolycarbonates with number‐average molecular weight (M_n) values up to 19.₂ × 10³. ¹³C NMR analysis disclosed that these polymers had scrambled structures in which the sugar carbonate and aliphatic carbonate moieties were nearly randomly distributed along a polymer chain. However, solution polycondensations between 1,4:3,6‐dianhydro‐2,5‐bis‐O‐(p‐nitrophenoxycarbonyl)‐D ‐glucitol or 1,4:3,6‐dianhydro‐2,5‐bis‐O‐(p‐nitrophenoxycarbonyl)‐D ‐mannitol, and the α,ω‐alkanediols in sulfolane or dimethyl sulfoxide at 60 °C gave well‐defined copolycarbonates having regular structures consisting of alternating sugar carbonate and aliphatic carbonate moieties with M_n values up to 33.₈ × 10³. Differential scanning calorimetry demonstrated that all the copolycarbonates were amorphous with glass‐transition temperatures ranging from 1 to 65 °C, which decreased with increasing lengths of the methylene chain of the aliphatic diols. Additionally, all the copolycarbonates were stable up to 310–330 °C as estimated by thermogravimetric analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2312–2321, 2003     

Functional zinc(II) phthalocyanines bearing Schiff base complexes as oxidation catalysts for bleaching systems

Oxidation catalysis is used to increase the performance of hydrogen peroxide in laundry bleach applications. Bleach catalysts provide cost‐effective, energy‐saving and environmentally friendly bleach systems yielding perfect stain removal at lower temperatures. This comparative study is based on the synthesis of bis[bis(salicylhydrazonephenoxy)manganese(III)] phthalocyaninatozinc(II) ( 2 ), bis[bis(salicylhydrazonephenoxy)cobalt(III)] phthalocyaninatozinc(II) ( 3 ) and bis[bis(salicylhydrazonephenoxy)iron(III)] phthalocyaninatozinc(II) ( 4 ) as tri‐nuclear complexes consisting of two Schiff base complexes substituting a zinc phthalocyanine. Complexion on the periphery to obtain complexes 2 , 3 , 4 was performed through the reaction of a Schiff base‐substituted phthalocyanine using MnCl₂?4H₂O, CoCl₂?6H₂O or FeCl₃?6H₂O salts in basic condition in dimethylformamide. Fourier transform infrared, ¹H NMR, ¹³C NMR, UV–visible, inductively coupled plasma optical emission and mass spectra were applied to characterize the prepared compounds. The bleach performances of the three phthalocyanine compounds 2 , 3 , 4 were examined by the degradation of morin as hydrophilic dye. The degradation progress in the presence of catalysts 2 , 3 , 4 /H₂O₂ combination in aqueous solution was investigated using an online spectrophotometric method. It was found that the catalysts 2 , 3 , 4 exhibited better bleaching performance at 25 °C than tetraactylethylethylenediamine as bleach activator used in powder detergent formulations for stain removal. Copyright © 2015 John Wiley & Sons, Ltd.