Raman spectrum study of 3.3'-diethylthiatri carbocyanine iodide

3.3'-Diethylthiatricarbocyanine iodide (DTTC) dye is an important infrared Raman probe molecule, and has received great attention in the past decades due to their potential applications in Raman imaging, single cell detection, and tumor marker. In the present work, ordinary Raman, surface enhanced Raman scattering (SERS), and theoretical Raman spectra were given to estimate the Raman spectrum of DTTC suspension. More specifically, the original gold nanospheres (60-nm diameter) and gold nanorods (NRs) were encoded with DTTC and stabilized with a layer of thiol-polyethylene glycol (PEG) as Raman reporter, and SERS data were obtained from the samples. Density functional theory (DFT) calculation was applied to calculate the optimized Raman spectra of DTTC water solvent on a B3LYP/6-31G level. Subsequently, the obtained experimental spectra from the DTTC were carefully compared with the theoretically calculated spectra. From the spectra comparation, good agreements were obtained between the theoretical and experimental results. This work will facilitate the development of ultrasensitive SERS probes for advanced biomedical applications.     

Raman,infrared, SERS and theoretical study of 3‐(1‐phenylpropan‐2‐ylamino) propanenitrile,fenproporex

Infrared, Raman and surface‐enhanced Raman scattering (SERS) spectra of 3‐(1‐phenylpropan‐2‐ylamino)propanenitrile (fenproporex) have been recorded. Density functional theory (DFT) with the B3LYP functional was used for optimizations of ground state geometries and simulation of Raman and SERS vibrational spectra of this molecule. Bands of the vibrational spectra were assigned in detail. The comparison of SERS spectra obtained by using colloidal silver and gold nanoparticles with the corresponding Raman spectrum reveals enhancement and shifts in bands, suggesting a possible partial charge‐transfer mechanism in the SERS effect. Information about the orientation of fenproporex on the nanometer‐sized metal structures is also obtained. Copyright © 2011 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering from polystyrene on gold clusters

Surface‐enhanced Raman scattering (SERS) constitutes a spectroscopic method of rapidly growing importance, and polystyrene is a widely used compound of great industrial importance. In this work, SERS data were obtained from polystyrene samples prepared by vapor deposition of gold and plasma‐induced polymerization of styrene gas. A thorough examination of this data is presented. The relationships between sample preparation parameters, gold‐cluster morphology, and SERS intensity were elucidated. Using Wilson's notation, vibrations were assigned to all bands between 250 and 1750 cm⁻¹ in the ordinary Raman and SERS spectra of polystyrene. The correct assignment of these bands would be a significant achievement because they have been controversial in the literature for ∼30 years. Our assignments were made by reviewing the literature and comparing the assignments found there to spectral data acquired during this study; they were confirmed using density functional theory (DFT) calculations performed on the styrene monomer. The orientation of polystyrene's phenyl ring, relative to the gold surface, was determined. It has been suggested that reactions involving silver catalyze polystyrene degradation during SERS, but we found that silver is not necessary for the degradation to occur. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of hydroxyproline

Surface‐enhanced Raman scattering (SERS) spectra of hydroxyproline and one deuterated analogue are reported. In this work, we tackled the problem of SERS reproducibility by employing gold colloids instead of the usual silver sols to achieve plasmon enhanced Raman scattering. We slightly modified modified a previously published procedure to obtain to obtain the colloid, and concentrated the gold particles by centrifugation. The SERS spectra show distinctive bands of hydroxyproline, assigned by comparison to normal Raman spectra and density functional theory calculations. Repeated measurements using this procedure showed reproducible SERS spectra. Copyright © 2011 John Wiley & Sons, Ltd.     

Vibrational spectroscopic studies and computational study of methyl(2‐methyl‐4,6–dinitrophenylsulfanyl)ethanoate

FT‐IR and FT‐Raman spectra of methyl(2‐methyl‐4,6–dinitrophenylsulfanyl)ethanoate (MDIE) were recorded and analyzed. Surface‐enhanced Raman scattering (SERS) spectra were recorded in silver colloid and silver electrode. The vibrational wavenumbers were computed using HF/6‐31G* and B3LYP/6‐31G* basis. The data obtained from vibrational wavenumber calculations are used to assign vibrational bands obtained in infrared and Raman spectroscopies as well as in SERS of the studied molecule. The first hyperpolarizability and infrared intensities are reported. The geometrical parameters of the title compound are in agreement with the reported similar derivatives. The presence of new bands at 1045 and 948 cm⁻¹ in the SERS spectrum in silver electrode is related to the change in orientation of the molecule with respect to the metal surface. In silver colloid SERS spectrum, the methyl group attached to the methoxy carbonyl group is close to the metal surface, whereas on silver electrode the methyl group attached to the phenyl ring is close to the metal surface. Copyright © 2009 John Wiley & Sons, Ltd.     

pH‐sensing nanostar probe using surface‐enhanced Raman scattering (SERS): theoretical and experimental studies

Local pH environment has been considered to be a potential biomarker for tumor diagnosis because solid tumors contain highly acidic environments. A pH‐sensing nanoprobe based on surface‐enhanced Raman scattering (SERS) using nanostars under near‐infrared excitation has been developed for potential biomedical applications. To theoretically investigate the effect of protonation state on SERS spectra of p‐mercaptobenzoic acid (pMBA), we used the density functional theory (DFT) with the B3LYP functional to calculate Raman vibrational spectra of pMBA‐Au/Ag complex in both protonated and deprotonated states. Vibrational spectral bands were assigned with DFT calculation and used to investigate SERS spectral changes observed from experiment when varying pH value between five and nine. The SERS peak position of pMBA at ~1580 cm⁻¹ was identified to be a novel pH‐sensing index, which has small but noticeable downshift with pH increase. This phenomenon is confirmed and well‐explained with theoretical simulation. The study demonstrates that SERS is a sensitive tool to monitor minor structural changes due to local pH environment, and DFT calculations can be used to investigate Raman spectra changes associated with minor differences in molecular structure. Copyright © 2013 John Wiley & Sons, Ltd.     

Experimental and theoretical FT‐IR and FT‐Raman spectroscopic analysis of N1‐methyl‐2‐chloroaniline

In this work, the experimental and theoretical vibrational spectra of N1‐methyl‐2‐chloroaniline (C₇H₈NCl) were studied. FT‐IR and FT‐Raman spectra of the title molecule in the liquid phase were recorded in the region 4000–400 cm^?1 and 3500–50 cm^?1, respectively. The structural and spectroscopic data of the molecule in the ground state were calculated by using density functional method (B3LYP) with the 6‐311++G(d,p) basis set. The vibrational frequencies were calculated and scaled values were compared with experimental FT‐IR and FT‐Raman spectra. The observed and calculated frequencies are found to be in good agreement. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. ¹³C and ¹H NMR chemical shifts results were compared with the experimental values. The optimized geometric parameters (bond lengths and bond angles) were given and are in agreement with the corresponding experimental values of aniline and p‐methyl aniline. Copyright © 2008 John Wiley & Sons, Ltd.     

Identification of two Ag‐2,2′:6′,2″‐terpyridine surface species on Ag nanoparticle surfaces by excitation wavelength dependence of SERS spectra and factor analysis: evidence for chemical mechanism contribution to SERS of Ag(0)–tpy

Measurement and interpretation of the excitation wavelength dependence of surface‐enhanced Raman scattering (SERS) spectra of molecules chemisorbed on plasmonic, e.g. Ag nanoparticle (NP) surfaces, are of principal importance for revealing the charge transfer (CT) mechanism contribution to the overall SERS enhancement. SERS spectra, their excitation wavelength dependence in the 445–780‐nm range and factor analysis (FA) were used for the identification of two Ag‐2,2′:6′,2″‐terpyridine (tpy) surface species, denoted Ag⁺–tpy and Ag(0)–tpy, on Ag NPs in systems with unmodified and/or purposefully modified Ag NPs originating from hydroxylamine hydrochloride‐reduced hydrosols. Ag⁺–tpy is a spectral analogue of [Ag(tpy)]⁺ complex cation, and its SERS shows virtually no excitation wavelength dependence. By contrast, SERS of Ag(0)–tpy surface complex generated upon chloride‐induced compact aggregate formation and/or in strongly reducing ambient shows a pronounced excitation wavelength dependence attributed to a CT resonance (the chemical mechanism) contribution to the overall SERS enhancement. Both the resonance (λ_exc = 532 nm) and off‐resonance (λ_exc = 780 nm) pure‐component spectra of Ag(0)–tpy obtained by FA are largely similar to surface‐enhanced resonance Raman scattering (λ_exc = 532 nm in resonance with singlet metal to ligand CT (¹ MLCT) transition) and SERS (λ_exc = 780 nm) spectra of [Fe(tpy)₂]²⁺ complex dication. Copyright © 2014 John Wiley & Sons, Ltd.     

Concentration‐dependent surface‐enhanced Raman scattering and molecular dynamic study of dimethyl formamide

A concentration‐dependent Raman study of dimethyl formamide (DMF) in Ag nanocolloidal solution was carried out in order to observe the effect of concentration on the surface enhancement mechanism. The Raman spectra in the region 900–2200 cm⁻¹ comprising four prominent Raman modes were measured experimentally and analyzed at five different concentrations: 1, 3, 5, 7, 10 mM , and in neat DMF. In order to find the possible configurations of DMF + Ag complexes, density functional theory (DFT) calculations were carried out taking one, three and five Ag atom clusters. The Raman spectra of unconjugated DMF, DMF + Ag and DMF + 3Ag complexes were calculated theoretically to assign the vibrational modes under consideration more accurately and to understand the wavenumber shift and change in intensity observed in experimental measurements. Water present in the colloidal solution may also conjugate with DMF and its complexes with Ag. In order to see the influence of water on the wavenumber shift and intensity changes, we have also obtained the optimized structures and Raman modes of DMF + water and DMF + water + Ag complexes. Good agreement between the experimental and theoretical wavenumber shifts has been obtained by using B3LYP functional theory and CEP‐31G basis set for the DMF + Ag complex. The experimental results suggest that the SERS enhancement is concentration‐dependent. The concentration‐dependent linewidth shows the existence of the phenomena of motional narrowing and diffusion dynamics in the colloidal solution. Copyright © 2007 John Wiley & Sons, Ltd.     

Adsorption of 1,2,4‐triazole on a silver electrode: surface‐enhanced Raman spectroscopy and density functional theory studies

The pH‐dependent surface‐enhanced Raman scattering (SERS) of 1,2,4‐triazole adsorbed on silver electrode and normal Raman (NR) spectra of this compound in the aqueous solutions were investigated. The observed bands in the NR and SERS spectra were assigned with the help of density functional theory calculations for model molecules in the neutral, anionic, and cationic forms and their complexes with silver. The Raman wavenumbers and intensities were computed at the optimized molecular geometry. Vibrational assignments of the SERS and NR spectra are provided by calculated potential energy distributions. The combination of experimental SERS results and density functional theory calculations provide an insight into the molecular structure of adlayers formed by 1,2,4‐triazole on a silver surface at varying pH values and enable the determination of molecular orientation with respect to the surface. Copyright © 2012 John Wiley & Sons, Ltd.     

Understanding tip‐enhanced Raman spectra of biological molecules: a combined Raman,SERS and TERS study

Although conventional Raman, surface‐enhanced Raman (SERS) and tip‐enhanced Raman spectroscopy (TERS) have been known for a long time, a direct, thorough comparison of these three methods has never been carried out. In this paper, spectra that were obtained by conventional Raman, SERS (on gold and silver substrates) and TERS (in ‘gap mode’ with silver tips and gold substrates) are compared to learn from their differences and similarities. Because the investigation of biological samples by TERS has recently become a hot topic, this work focuses on biologically relevant substances. Starting from the TER spectra of bovine serum albumin as an example for a protein, the dipeptides Phe–Phe and Tyr–Tyr and the tripeptide Tyr–Tyr–Tyr were investigated. The major findings were as follows. (1) We show that the widely used assumption that spectral bands do not shift when comparing SER, TER and conventional Raman spectra (except due to binding to the metal surface in SERS or TERS) is valid. However, band intensity ratios can differ significantly between these three methods. (2) Marker bands can be assigned, which should allow one to identify and localize proteins in complex biological environments in future investigations. From our results, general guidelines for the interpretation of TER spectra are proposed. Copyright © 2012 John Wiley & Sons, Ltd.     

DFT study and quantitative detection by surface‐enhanced Raman scattering (SERS) of ethyl carbamate

Ethyl carbamate (EC), a potentially toxic compound, is found in alcoholic beverages and fermented foodstuff. A combined experimental and theoretical study of Raman on EC is reported in this work for the first time. The Raman bands observed for EC in solid phase are characteristic for the carbonyl group, C―C, C―H and N―H stretching and deformation vibrations. These spectral features coupled with a pKa study allowed establishing the neutral species of EC present in the aqueous solutions experimentally tested at different concentrations. In addition, by performing a density functional theory study in the gas phase, the calculated geometry, the harmonic vibrational modes, and the Raman scattering activities of EC were found to be in good agreement with our experimental data and helped establish the surface‐enhanced Raman scattering (SERS) behavior and EC adsorption geometry on the silver surfaces. The Raman peak at 1006 cm⁻¹, assigned to the υ_s(CC) + ω(CH) modes, the strongest and best reproducible peak in the SERS spectra, was used for a quantitative evaluation of EC. The limit of detection, which corresponds to a signal‐to‐noise ratio equal to 3, was found to be 2 × 10⁻⁷ M (17.8 µg l⁻¹). SERS spectra obtained by using hydroxylamine hydrochloride‐reduced silver nanoparticles provide a fast and reproducible qualitative and quantitative determination of EC in aqueous solution. Copyright © 2013 John Wiley & Sons, Ltd.     

Molecular structure,spectroscopic (FTIR,FTIR gas phase,FT‐Raman) first‐order hyperpolarizability and HOMO–LUMO analysis of 4‐methoxy‐2‐methyl benzoic acid

Vibrational spectral analysis was carried out for 4‐methoxy‐2‐methyl benzoic acid (4M2MBA) by using Fourier transform infrared (FT‐IR) (solid, gas phase) and FT‐Raman spectroscopy in the range of 400–4000 and 10–3500 cm⁻¹ respectively. The effects of molecular association through O H···O hydrogen bonding have been described by the single dimer structure. The theoretical computational density functional theory (DFT) and Hatree‐Fock (HF) method were performed at 6–311++G(d,p) levels to derive the equilibrium geometry, vibrational wavenumbers, infrared intensities and Raman scattering activities. The scaled theoretical wavenumbers were also shown to be in good agreement with experimental data. The first‐order hyperpolarizability (β₀) of this novel molecular system and related properties (β, α₀ and Δα) of 4M2MBA are calculated using the B3LYP/cc‐pvdz basis set, based on the finite‐field approach. A detailed interpretation of the infrared and Raman spectra of 4M2MBA is reported. The theoretical spectrograms for FT‐IR and FT‐Raman spectra of the title molecule were also constructed and compared with the experimental one. Copyright © 2010 John Wiley & Sons, Ltd.     

Optimization of extinction efficiency of gold‐coated polystyrene bead substrates improves surface‐enhanced Raman scattering effects by post‐growth microwave heating treatment

We report a novel post‐growth microwave treatment approach to selectively modify the surface morphologies of gold (Au) films coated on the polystyrene (PS) bead substrates for effectively improving the surface‐enhanced Raman scattering (SERS) effect on the analytes. The discrete dipole approximation (DDA) model was introduced to evaluate the enhancement effects by calculating the localized electromagnetic field distribution and extinction efficiency based on the sizes of the trenches and voids, and the surface roughness of the modified Au–PS bead substrates. The SERS performance of microwave‐modified Au–PS substrates on rhodamine 6G (Rh 6G) and saliva yields at least 10‐fold improvements in SERS intensities compared to the as‐grown substrates, which is also in agreement with theoretical predictions by DDA modeling. This work demonstrates both experimentally and theoretically the efficacy of the microwave heating treatment on modifying the Au–PS bead substrates for the realization of high SERS performance in biomedical applications. Copyright © 2009 John Wiley & Sons, Ltd.     

Experimental and theoretical studies of Raman spectroscopy on 4‐mercaptopyridine aqueous solution and 4‐mercaptopyridine/Ag complex system

Raman scattering and surface‐enhanced Raman scattering (SERS) have been used to study the behavior of 4‐mercaptopyridine (4‐Mpy) dissolved in water and adsorbed on silver mirrors. In order to gain the actual structure and the theoretical modes of the 4‐Mpy dissolved in water and adsorbed on the surface of silver mirror, ab initio calculation at the Hartree–Fock (HF) level and density functional theory (DFT) at Beck's three‐parameter Lee‐Yang‐Parr (B3LYP) level were performed to calculate the vibrational modes and wavenumbers. 4‐Mpy/2H₂O and 4‐Mpy/Ag complex systems were optimized, and then the corresponding Raman spectra were calculated and analyzed. Compared with the experimental results, the calculated results of 4‐Mpy and 4‐Mpy/2H₂O complex systems obtained from DFT method were more accurate. Among the results calculated with HF method, the one with three Ag atoms was economical, which took less computer time but gave equivalent results to those with more noumber of Ag atoms. Copyright © 2007 John Wiley & Sons, Ltd.     

Theoretical elucidation of the origin of surface‐enhanced Raman spectra of PCB52 adsorbed on silver substrates

To better understand experimentally observed surface‐enhanced Raman Scattering (SERS) of polychlorinated biphenyls (PCBs) adsorbed on nanoscaled silver substrates, a systematic theoretical study was performed by carrying out density functional theory and time‐dependent density functional theory calculations. 2,2′,5,5′‐tetrachlorobiphenyl (PCB52) was chosen as a model molecule of PCBs, and Ag_n (n = 2, 4, 6, and 10) clusters were used to mimic active sites of substrates. Calculated normal Raman spectra of PCB52–Ag_n (n = 2, 4, 6, and 10) complexes are analogical in profile to that of isolated PCB52 with only slightly enhanced intensity. In contrast, the corresponding SERS spectra calculated at adopted incident light are strongly enhanced, and the calculated enhancement factors are 10⁴ ~ 10⁵. Thus, the experimentally observed SERS phenomenon of PCBs supported on Ag substrates should correspond to the SERS spectra rather than the normal Raman spectra. The dominant enhancement in Raman intensities origins from the charge transfer resonance enhancement between the molecule and clusters. Copyright © 2014 John Wiley & Sons, Ltd.     

FT‐Raman,FT‐IR spectra and DFT calculations on monomeric and dimeric structures of 5‐fluoro‐ and 5‐chloro‐salicylic acid

The experimental and theoretical study on the structures and vibrations of 5‐fluoro‐salicylic acid and 5‐chloro‐salicylic acid (5‐FSA and 5‐ClSA, C₇H₅FO₃ and C₇H₅ClO₃) is presented. The Fourier transform infrared spectra (4000–400 cm⁻¹) and the Fourier transform Raman spectra (4000–50 cm⁻¹) of the title molecules in the solid phase were recorded. The molecular structures, vibrational wavenumbers, infrared intensities, Raman intensities and Raman scattering activities were calculated for a pair of molecules linked by the intermolecular O H···O hydrogen bond. The geometrical parameters and energies of 5‐FSA and 5ClSA were obtained for all eight conformers/isomers from density functional theory (DFT) (B3LYP) with 6‐311++G(d,p) basis set calculations. The computational results identified the most stable conformer of 5‐FSA and 5‐ClSA as the C1 form. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The spectroscopic and theoretical results were compared with the corresponding properties for 5‐FSA and 5‐ClSA monomers and dimer of C1 conformer. The optimized bond lengths, bond angles and calculated wavenumbers showed the best agreement with the experimental results. Copyright © 2010 John Wiley & Sons, Ltd.     

Potential‐induced Raman behavior of individual (R)‐di‐2‐naphthylprolinol molecules on a Ag‐modified Ag electrode

The applicability of surface‐enhanced Raman spectroscopy is demonstrated to probe the adsorption behavior of individual molecules on a Ag electrode. High‐quality SERS spectra of (R)‐di‐2‐naphthylprolinol (DNP) were obtained from ultradilute solutions (10⁻¹² M ) on the Ag‐nanoparticle‐modified Ag electrode, which is attributed to the high electromagnetic (EM) effect of the SERS‐active system as well as to the strong adsorption and interaction of DNP molecules with Ag. The stable SERS spectra present remarkable potential dependence, which gives evidence for the behavior of individual DNP molecules on the Ag surface. Based on statistical analysis for the probability of DNP molecules located in ‘hot spots’, we propose an SERS mechanism for individual molecules in the electrode system, in combination with the hot‐spot model and orientation of the probe molecules. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman and DFT study of hydrogen‐bonded 2‐ and 3‐chloropyridine with methanol

Precise polarized Raman measurements of 2‐chloropyridine (2Clpy) in the region 560–1060 cm⁻¹ and 3‐chloropyridine (3Clpy) in the region 680–1080 cm⁻¹ at different concentrations in mole fraction of methanol were made to calculate the isotropic part of the Raman spectra, which has contributions only from vibrational dephasing. A detailed analysis of the Raman spectra was carried out to see the variation of peak position and linewidth. The dephasing is mode specific. The trigonal bending mode of 3Clpy has two components when it is mixed with methanol. The relative intensities of these two bands are used to calculate the equilibrium constants. The ring‐breathing mode of 3Clpy, on the other hand, remains single in the mixture. The appearance of a new band corresponding to the trigonal bending mode, as well as the nonappearance of that of the ring‐breathing mode, is also shown by the density functional theory (DFT) study of gas phase and methanol‐solvated complexes. The vibrational dephasing time for the hydrogen‐bonded ring‐breathing mode is calculated from the linear Raman linewidth and peak position data. For other modes, it was not possible to calculate the dephasing time because of the nonavailability of a suitable theoretical model. Contrary to 3Clpy, in 2Clpy the ring‐breathing mode becomes a doublet but the trigonal bending mode remains single. It is seen that the hydrogen‐bonding capacity of chloropyridines is highly influenced by the position of the Cl atom. Single and double components of these modes are also explained by DFT calculations. We obtained excellent match of the experimental and theoretical spectra with the B3LYP/6‐31 + G (d,p) method. Copyright © 2008 John Wiley & Sons, Ltd.     

Density functional theory calculation and vibrational spectral analysis of 4‐hydroxy‐3‐(3‐oxo‐1‐phenylbutyl)‐2H‐1‐benzopyran‐2‐one

The Fourier transform infrared (4000–400 cm⁻¹) and Fourier transform Raman (3500–500 cm⁻¹) spectra of 4‐hydroxy‐3‐(3‐oxo‐1‐phenylbutyl)‐2H‐1‐benzopyran‐2‐one (Warfarin) have been measured and calculated. The structure optimization has been made using density functional theory (DFT) calculations. Complete vibrational assignments of the observed spectra have been compared with theoretical wavenumbers. The wavenumber increasing in the methyl group shows the electronic hyperconjugation effect. The natural bond orbital (NBO) analysis reveals the hyperconjugation interaction and the intramolecular hydrogen bonding. The first‐order hyperpolarizability has been calculated. Copyright © 2009 John Wiley & Sons, Ltd.