2,4‐Disila‐1,3,5‐oxadiazin,Cyclodisilazan‐Carbonsäure‐silylamid und ‐silylester

The lithium salts of the Me₃Si‐ as well as Me₃Si‐ and Me₂SiF‐substituted Cyclotrisilazanes I and II react with tert‐butylacylchloride under ring contraction and formation of the cyclodisilazane‐silylester, Me₃SiN(SiMe₂–N)₂SiMe₂–O–CO–CMe₃ ( 1 ). The lithium salt of the fluorodi‐methylsilyl‐substituted cyclotrisilazan III forms with benzoylchloride primarily in the analogous reaction the carboxy‐silyl‐amide, Me₂SiF(N–SiMe₂)₂SiMe₂–NH–CO–C₆H₅⁺ ( 2 ), which can be converted with III and benzoylchloride into the cyclodisilazane‐silylester, Me₂SiF(NSiMe₂)₂SiMe₂–O–CO–C₆H₅, ( 3 ). A silylester substituted six‐membered disila‐oxadiazine ( 4 ) is the result of the reaction of the lithiated cyclotrisilazane, (Me₂SiNH)₂, (Me₂SiNLi) with tert‐butyl‐acylchloride. The reaction includes anionic ring contraction and can be rationilized by a process analogous to keto‐enol‐tautomerism. Dilithiated octamethyl‐cyclotetrasilazane, (Me₂SiNHMe₂SiNLi)₂, reacts with tert‐butyl‐acylchloride or benzoylchloride in a molar ratio 1:2 to yield symmetrically acylestersubstituted cyclodisilazanes, (RCO–O–SiMe₂–NSiMe₂)₂, R = C₆H₅ ( 5 ), CMe₃ ( 6 ). The reaction mechanisms are discussed and the crystal structures of 2 and 6 are reported.     

Competitive Gold‐Promoted Meyer–Schuster and oxy‐Cope Rearrangements of 3‐Acyloxy‐1,5‐enynes: Selective Catalysis for the Synthesis of (+)‐(S)‐γ‐Ionone and (−)‐(2S,6 R)‐cis‐γ‐Irone

We report a simple, highly stereoselective synthesis of (+)‐(S)‐γ‐ionone and (‐)‐(2S,6R)‐cis‐γ‐irone, two characteristic and precious odorants; the latter compound is a constituent of the essential oil obtained from iris rhizomes. Of general interest in this approach are the photoisomerization of an endo trisubstituted cyclohexene double bond to an exo vinyl group and the installation of the enone side chain through a [(NHC)Au^I]‐catalyzed Meyer–Schuster‐like rearrangement. This required a careful investigation of the mechanism of the gold‐catalyzed reaction and a judicious selection of reaction conditions. In fact, it was found that the Meyer–Schuster reaction may compete with the oxy‐Cope rearrangement. Gold‐based catalytic systems can promote either reaction selectively. In the present system, the mononuclear gold complex [Au(IPr)Cl], in combination with the silver salt AgSbF₆ in 100:1 butan‐2‐one/H₂O, proved to efficiently promote the Meyer–Schuster rearrangement of propargylic benzoates, whereas the digold catalyst [{Au(IPr)}₂(μ‐OH)][BF₄] in anhydrous dichloromethane selectively promoted the oxy‐Cope rearrangement of propargylic alcohols.     

Stereospecific synthesis of a family of novel (E)‐2‐aryl‐1‐silylalka‐1,4‐dienes or (E)‐4‐aryl‐5‐silylpenta‐1,2,4‐trienes via a cross‐coupling of (Z)‐silyl(stannyl)ethenes with allyl halides or propargyl bromide

Stereospecific synthesis of a family of novel (E)‐2‐aryl‐1‐silylalka‐1,4‐dienes or (E)‐4‐aryl‐5‐silylpenta‐1,2,4‐trienes via a cross‐coupling of (Z)‐silyl(stannyl)ethenes with allyl halides or propargyl bromide is described. In the reaction with allyl bromide, either a Pd(dba)₂? CuI combination (dba, dibenzylideneacetone) in DMF or copper(I) iodide in DMSO–THF readily catalyzes or mediates the coupling reaction of (Z)‐silyl(stannyl)ethenes at room temperature, producing novel vinylsilanes bearing an allyl group β to silicon with cis ‐disposition in good yields. Allyl chlorides as halides can be used in the CuI‐mediated reaction. CuI alone much more effectively mediates the cross‐coupling reaction with propargyl bromide in DMSO–THF at room temperature compared with a Pd(dba)₂? CuI combination catalysis in DMF, providing novel stereodefined vinylsilanes bearing an allenyl group β to silicon with cis ‐disposition in good yields. Copyright © 2008 John Wiley & Sons, Ltd.     

Facile Chemoselective synthesis of 2‐(2‐(Methoxycarbonyl)‐3‐oxo‐2,3‐dihydrobenzofuran‐2‐yl)benzoic acids and 3H,3’H‐Spiro[benzofuran‐2,1′‐isobenzofuran]‐3,3′‐dione derivatives

Oxidation of some derivatives of 4b,9b–dihydroxyindeno[1,2‐b]benzofuran‐10‐one have been investigated in detail using lead(IV) acetate in acetic acid under reflux conditions and periodic acid in aqueous ethanol at room temperature. We realized that during the first 5–15 minutes of the oxidation reactions in lead(IV) acetate/acetic acid system, 3H,3’H‐spiro[benzofuran‐2,1′‐isobenzofuran]‐3,3′‐dione derivatives have been synthesized chemo selectively, while, if the reaction mixtures stirred for additional 3 hours, the main products would be 2‐(2‐(Methoxycarbonyl)‐3‐oxo‐2,3‐dihydrobenzofuran‐2‐yl)benzoic acids. Moreover, room temperature oxidation of 4b,9b–dihydroxyindeno[1,2‐b]benzofuran‐10‐ones by periodic acid (H₅IO₆), leads to the formation of 3H,3’H‐spiro[benzofuran‐2,1′‐isobenzofuran]‐3,3′‐dione derivatives in good to excellent yields.     

基于1,2-二氢-2-(4-羧基苯基-4-[4-(4-羧基苯氧基)-3-甲基苯基](2H)二氮杂萘-1-酮的新型芳香聚酰胺的简易合成

A new monomer diacid, 1,2-dihydro-2-(4-carboxylphenyl)-4-[4-(4-carboxylphenoxy)-3-methylphenyl]phtha-lazin-1-one (3), was synthesized through the aromatic nucleophilic substitution reaction of a readily available unsymmetrical phthalazinone 1 bisphenol-like with p-chlorobenzonitrile in the presence of potassium carbonate in N,N-dimethylacetamide and alkaline hydrolysis. The diacid could be directly polymerized with various aromatic diamines 4a-4e using triphenyl phosphite and pyridine as condensing agents to give five new aromatic poly(ether amide)s 5a-5e containing the kink non-coplanar heterocyclic units with inherent viscosities of 1.30-1.54 dL/g.The polymers were readily soluble in a variety of solvents such as N,N-dimethylformamide (DMF), N,N-dimethyl-acetamide (DMA), dimethylsulfoxide (DMSO), N-methyl-2-pyrrolidinone (NMP), and even in m-cresol and pyridine (Py). The transparent, flexible and tough films could be formed by solution casting. The glass transition tem-peratures Tg were in the range of 286-317℃.     

Ethyl 1,4‐Dihydro‐4‐oxo‐1,8‐naphthyridine‐3‐carboxylates by a Tandem SNAr‐Addition‐Elimination Reaction

A series of N‐substituted 1,4‐dihydro‐4‐oxo‐1,8‐naphthyridine‐3‐carboxylate esters has been prepared in two steps from ethyl 2‐(2‐chloronicotinoyl)acetate. Treatment of the β‐ketoester with N,N‐dimethylformamide dimethyl acetal in N,N‐dimethylformamide (DMF) gave a 95% yield of the 2‐dimethylaminomethylene derivative. Subsequent reaction of this β‐enaminone with primary amines in DMF at 120^oC for 24 h then afforded the target compounds in 47–82% yields by a tandem S_NAr‐addition‐elimination reaction. Synthetic and procedural details as well as a mechanistic rationale are presented.     

Poly­[lead(II)‐μ‐4,4‐bi­pyridine‐N:N′‐di‐μ‐bromo]

The title complex, [PbBr₂(bipy)]_n (bipy is 4,4′‐bi­pyridine, C₁₀H₈N₂), was obtained by hydro­thermal reaction of Pb(O₂CCH₃), NaBr and bipy. The bipy group acts as a linear bifunctional bridge forming a planar {–[Pb(bipy)]–}_n belt in the direction of the b axis. The remaining lead coordination sites are occupied by Br ions which link Pb centres in adjacent belts through double bridges to form extended two‐dimensional layers.     

Methyl 2‐benzamido‐4‐(3,4‐dimethoxyphenyl)‐5‐methylbenzoate and N‐{5‐benzoyl‐2‐[(Z)‐2‐methoxyethenyl]‐4‐methylphenyl}benzamide

Methyl 2‐benzamido‐4‐(3,4‐dimethoxyphenyl)‐5‐methylbenzoate, C₂₄H₂₃NO₅, (Ia), and N‐{5‐benzoyl‐2‐[(Z)‐2‐methoxyethenyl]‐4‐methylphenyl}benzamide, C₂₄H₂₁NO₃, (IIa), were formed via a Diels–Alder reaction of appropriately substituted 2H‐pyran‐2‐ones and methyl propiolate or (Z)‐1‐methoxybut‐1‐en‐3‐yne, respectively. Each of these cycloadditions might yield two different regioisomers, but just one was obtained in each case. In (Ia), an intramolecular N—H...O hydrogen bond closes a six‐membered ring. A chain is formed due to aromatic π–π interactions, and a three‐dimensional framework structure is formed by a combination of C—H...O and C—H...π(arene) hydrogen bonds. Compound (IIa) was formed not only regioselectively but also chemoselectively, with just the triple bond reacting and the double bond remaining unchanged. Compound (IIa) crystallizes as N—H...O hydrogen‐bonded dimers stabilized by aromatic π–π interactions. Dimers of (IIa) are connected into a chain by weak C—H...π(arene) interactions.     

Highly efficient AgNO3‐catalyzed approach to 2‐(benzo[d]azol‐2‐yl)phenols from salicylaldehydes with 2‐aminothiophenol, 2‐aminophenol and benzene‐1,2‐diamine

A new, convenient and efficient AgNO₃‐catalyzed strategy for the preparation of 2‐(benzo[d]azol‐2‐yl)phenol derivatives in good to excellent yields (63–98%) is described. The reaction proceeds via condensation/intramolecular nucleophilic addition/oxidation process between substituted salicylaldehydes and 2‐aminothiophenol, 2‐aminophenol or benzene‐1,2‐diamine under mild reaction conditions. Notably, this reaction utilizes cheap AgNO₃ as a readily available and low‐cost benign oxidant at low catalyst loadings with excellent functional group tolerance.     

Short communication: An alternative and effective catalyst in the stereo‐specific reaction of Z‐1‐aryl‐1‐stannyl‐2‐silylethenes with allyl bromide

The Pd(dba)₂‐catalyzed reaction of Z‐1‐aryl‐1‐(tributylstannyl)‐2‐(trimethylsilyl)ethenes with allyl bromide in the presence of copper(I) iodide is reported for the first time. The reaction in the presence of 0.5 mol% Pd(dba)₂ and 8 mol% CuI in dimethylformamide takes place at room temperature to give E‐2‐aryl‐1‐(trimethylsilyl)penta‐1,4‐dienes exclusively in isolated yields of 62–99%. A putative reaction mechanism is proposed. Copyright © 2005 John Wiley & Sons, Ltd.     

1‐Amino‐2‐fluoromonocarba‐closo‐dodecaborates: K[1‐H2N‐2‐F‐closo‐1‐CB11H10] and [Et4N][1‐H2N‐2‐F‐closo‐1‐CB11I10]

The potassium salt of the [1‐H₂N‐2‐F‐closo‐1‐CB₁₁H₁₀]^– anion ( 1 ) was obtained from an insertion reaction of Li₃[7‐H₂N‐nido‐7‐CB₁₀H₁₀] with BF₃ · OEt₂. Anion 1 was protonated to the neutral species 1‐H₃N‐2‐F‐closo‐1‐CB₁₁H₁₀ (H 1 ) and it was iodinated with ICl to the [1‐H₂N‐2‐F‐closo‐1‐CB₁₁I₁₀]^– anion ( 2 ). All species were characterized by multinuclear NMR, IR, and Raman spectroscopy as well as by elemental analysis. The structure of H 1· (CH₃)₂CO was studied by single‐crystal X‐ray diffraction and the experimentally determined bond lengths are compared to values derived from density functional calculations.     

Poly[dimethyldiphenylphosphonium [di‐μ4‐iodido‐tetra‐μ3‐iodido‐pentacopper(I)]]

The title compound, {(C₁₄H₁₆P)[Cu₅I₆]}_n, prepared from the reaction between copper powder, iodine and dimethyldiphenylphosphonium iodide in hydroxyacetone, features an anion that consists of a continuous two‐dimensional Cu–I sheet [Cu—I = 2.5960 (14)–2.6994 (13) Å and Cu—I—Cu = 63.28 (5)–114.25 (5)°]. The cation, which lies on a mirror plane, is a typical dimethyldiphenylphosphonium ion. The structure shows a strong tendency towards segregation of the inorganic and organic parts of the structure into separate subspaces. The two‐dimensional Cu–I sheet displays a pronounced subcell with pseudo‐tetragonal symmetry that is broken by ordered vacancies on the Cu position. The symmetry is further reduced by the orientation of the interleaved organic counter‐ion that is inclined with respect to the pseudo‐mirror planes defined by the Cu–I sheet normal, perpendicular to the b axis.     

1,4‐Diiodobenzene with –COO–TEMPO (TEMPO = 2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐4‐yl) substituents at 2,5‐positions: synthesis and use as a monomer for new π‐conjugated polymers having nitroxyl radicals in side chains

The reaction of 2,5‐diiodo‐1,4‐benzenedicarbonyl chloride, C₆H₂I₂(COCl)₂‐p, with 4‐hydroxy‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO‐ol) gave I–Ph(COO–TEMPO)₂–I, Monomer‐1. Pd‐catalyzed polycondensation of Monomer‐1 with Me₃Sn‐Th‐SnMe₃ (2,5‐bis(trimethylstannyl)thiophene) and Bu₃Sn–CH = CH–SnBu₃ (1,2‐bis‐(tributylstannyl)ethylene) gave the corresponding π‐conjugated polymers, Polymer‐1 and Polymer‐2, respectively. Monomer‐1 was converted to a diethynyl compound, H–C ≡ C–Ph(COO–TEMPO)₂–C ≡ C–H (Monomer‐1'), and Pd‐catalyzed polycondensation between Monomer‐1 and Monomer‐1' gave a π‐conjugated poly(arylene ethynylene) type polymer, Polymer‐3. According to the expansion of the π‐conjugation system by the polymerization, the UV–vis peaks of Monomer‐1 (λ_max = 323 nm) and Monomer‐1' (327 nm) are shifted to longer wavelengths (λ_max = 365 nm, 385 nm, and 396 nm for Polymer‐1, Polymer‐2, and Polymer‐3, respectively). Polymer‐1–Polymer‐3 showed ESR signals at about g = 2.01 with reasonable intensities. They are electrochemically active and showed a peak current anodic (oxidation) peak at about 0.9 V versus Ag/AgCl, which is reasonable for TEMPO polymers. Copyright © 2013 John Wiley & Sons, Ltd.     

Solvent polarity and hydrogen bond effects on nucleophilic substitution reaction of 2‐bromo‐5‐nitrothiophene with piperidine

The reaction kinetics of 2‐bromo‐5‐nitro thiophene with piperidine was studied in a solvent with a mixture of propan‐2‐ol with methanol and n‐hexane at 25°C. The measured rate coefficients of the reaction demonstrated dramatic variations in propan‐2‐ol–n‐hexane mixtures and mild variations in propan‐2‐ol–methanol system. The second‐order rate coefficients of the reaction, k_A, decreased sharply with n‐hexane content. The multiparameter correlation of log k_A versus molecular‐microscopic solvent parameters shows interesting results in these solutions. Linear free energy relationship investigations confirm that polarity has a major effect on the reaction rate and hydrogen bond ability of the media has a slight effect on the reaction rate. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 185–190, 2011     

Poly[bis{μ2‐4‐[3,5‐bis(pyridin‐4‐yl)phenyl]pyridine}nona‐μ2‐oxido‐tetraoxidocopper(II)tetramolybdenum(VI)]

The title compound, [CuMo₄O₁₃(C₂₁H₁₅N₃)₂]_n, was synthesized by the reaction of ammonium molybdate, copper acetate and 4‐[3,5‐bis(pyridin‐4‐yl)phenyl]pyridine (DPPP) in an aqueous medium under hydrothermal conditions. The two unique molybdenum centers and the copper center adopt MoO₄ tetrahedral, MoO₅N octahedral and CuO₄N₂ octahedral geometries, respectively. These polyhedra are connected to each other through corner‐sharing to form a two‐dimensional Cu–Mo–O layer, which is further linked by the DPPP ligands to form the three‐dimensional inorganic–organic hybrid framework.     

An Efficient One‐Pot Synthesis of 7,7‐Dimethyl‐2‐(2‐oxo‐2H‐chromen‐3‐yl)‐4‐aryl‐7,8‐dihydroquinolin‐5(6H)‐one Derivatives Using Chitosan–SO3H as Biodegradable Organocatalyst

Chitosan sulfonic acid (CS–SO₃H), a biodegradable green catalyst, was found to be an impressive system for one‐pot four‐component reaction of different aromatic aldehydes, 3‐acetylcoumarin, dimedone, and ammonium acetate leading to 7,7‐dimethyl‐2‐(2‐oxo‐2H‐chromen‐3‐yl)‐4‐aryl‐7,8‐dihydroquinolin‐5(6H)‐one under solvent‐free condition. This methodology produces diverse superiorities such as operational simplicity, short reaction time, and high yield. Further, the catalyst can be reused for four times without any noticeable decrease in the catalytic activity.     

Synthesis and nonlinear optical properties of polyester containing 4‐di‐(2′‐hydroxyethoxy)‐4‐diphenyl‐hydrazonomethyl chromophore

The nonlinear optical property of new polyester has been studied via second harmonic generation (SHG). The values of electro‐optic coefficients, d₃₃ and d₃₁, of the poled polymer film were 3.15 × 10 ^?7 and 1.5 × 10^?7 esu, respectively. Thermal behavior of this polyester was studied through thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). 4‐di‐(2′‐hydroxyethoxy)‐4‐diphenyl‐hydrazonomethyl was synthesized from the reaction of 3,4‐dihydroxy‐4‐diphenyl‐hydrazonomethyl with 2–chloro–1‐ethanol in a 1:2 mole ratio and subsequently reacted with terephthaloyl chloride (TPC) in the presence of pyridine, as catalyst, to produce the new nonlinear polyester. The chemical structures of the resulting monomers and polymer were characterized by CHN analysis, ¹H‐NMR, FT‐IR, and UV–Vis spectroscopy. Copyright © 2009 John Wiley & Sons, Ltd.     

A 1,3,2‐ox­aza­borolidine dimer derived from (S)‐α,α‐di­phenyl­prolinol

The reaction of (S)‐α,α‐di­phenyl­prolinol with an excess of borane–tetra­hydro­furan complex yields a stable crystalline material with the composition C₃₄H₃₈B₂N₂O₂, which features a borane adduct of a spiro­cyclic structure with two ox­aza­borolidine rings joined by a central tetrahedral B atom. This dimeric ox­aza­borolidine complex, viz. 3,3,3′,3′‐tetra­phenyl‐1,1′‐spiro­bi(3a,4,5,6‐tetra­hydro‐3H‐pyrrolo­[1,2‐c][1,3,2]­ox­azaborole)–7‐borane, is the dominant product under various reaction conditions; its crystal structure is consistent with ¹¹B, ¹H and ¹³C NMR and IR analyses.     

25,27‐(6‐Tosyl‐3,9‐dioxa‐6‐aza­un­decane‐1,11‐diyldioxy)‐26,28‐(3,6,9‐trioxaun­decane‐1,11‐diyldioxy)­calix­[4]­arene

A new calix­[4]‐­crowned aza­crown ether, C₅₁H₅₉NO₁₁S, consisting of four phenyl rings in a 1,3‐alternate conformation was synthesized from the reaction of 25,27‐bis(5‐chloro‐3‐oxa­pentyl­oxy)­calix­[4]­crown‐5 and p‐toluene­sulfon­amide in the presence of Cs₂CO₃. A crown‐5 loop was attached on the two facing lower rims of the calix­[4]­arene and the N‐tosyl aza­crown group was attached on the other set of lower rims of the calix­[4]­arene backbone. This mol­ecule seems to offer an inside cavity for the formation of a host–guest complex.     

L‐Leucylglycine 0.67‐hydrate and [(4S)‐2,2‐dimethyl‐4‐(2‐methylpropyl)‐5‐oxoimidazolidin‐3‐ium‐1‐yl]acetate

Crystals of L‐leucylglycine (L‐Leu–Gly) 0.67‐hydrate, C₈H₁₆N₂O₃·0.67H₂O, (I), were obtained from an aqueous solution. There are three symmetrically independent dipeptide zwitterionic molecules in (I) and they are parallel to one another. The hydrogen‐bond network composed of carboxylate and amino groups and water molecules extends parallel to the ab plane. Hydrophilic regions composed of main chains and hydrophobic regions composed of the isobutyl groups of the leucyl residues are aligned alternately along the c axis. An imidazolidinone derivative was obtained from L‐Leu–Gly and acetone, viz. [(4S)‐2,2‐dimethyl‐4‐(2‐methylpropyl)‐5‐oxoimidazolidin‐3‐ium‐1‐yl]acetate, C₁₁H₂₀N₂O₃, (II), and was crystallized from a methanol–acetone solution of L‐Leu–Gly. The unit‐cell parameters coincide with those reported previously for L‐Leu–Gly dihydrate revealing that the previously reported values should be assigned to the structure of (II). One of the imidazolidine N atoms is protonated and the ring is nearly planar, except for the protonated N atom. Protonated N atoms and deprotonated carboxy groups of neighbouring molecules form hydrogen‐bonded chains. The ring carbonyl group is not involved in hydrogen bonding.