Elliptic NdCrO3 microplate by a simple one‐step hydrothermal synthesis route and its characterization and magnetic properties

Elliptic NdCrO₃ microplates were synthesized by a simple and facile one‐step hydrothermal method of processing temperature 280 °C for 3 days. The products prepared in this paper have been characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), X‐ray fluorescence (XRF), Fourier transform infrared spectroscopy (FTIR) and field‐emission scanning electron microscopy (FESEM). The magnetic properties of the final sample are also studied. The XRD pattern indicates the pure orthorhombic phase for NdCrO₃ particles, the XPS, XRF and FTIR results further demonstrate the composition and purity of the final product. A possible growth mechanism for elliptic NdCrO₃ microplates is proposed. Through the investigation of magnetic properties, it can be generally concluded that the orthorhombic elliptic NdCrO₃ microplates exhibit typical behaviors of magnetic transition, spin reorientation transition and magnetic exchange bias. The Néel temperature is 218 K and the spin reorientation transition temperature is 46 K. The hysteresis loop under 5 K shows that the value of exchange bias field (H_ex) is 12 Oe and the shift of remanent magnetization (ΔM) is 0.008 emu/g, respectively.     

Surfactant directed synthesis of mesoporous alumina and α‐alumina single crystal

Mesoporous Al₂O₃ were positively synthesized via treatment of the freshly precipitated amorphous alumina gel using aluminium sulphate as aluminium source, and sodium dodecyl sulphate (SDS) as structure‐directing agent (SDAs). The microstructures, morphologies and textural properties of the as‐prepared materials were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and thermo gravimetric analysis (TG‐DTA). The calcined product at 600 °C was highly porous in nature having a BET surface area of 42 m²/g. These porous Al₂O₃ exhibits excellent adsorption performance for Congo red and the corresponding decolourisation efficiencies reached 99% in just 15 min at 27 °C. The subsequent calcined product at 1200 °C is the alpha alumina single crystal hexagonal platelets with rhombohedral crystallization.     

Fabrication of Fe3O4 octahedra by a triethanolamine‐assisted hydrothermal process

Octahedral Fe₃O₄microcrystals were synthesized using a triethanolamine‐assisted route under hydrothermal conditions. The chemical compositions and morphologies of the as‐prepared samples were characterized in detail by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). During the hydrothermal process for the preparation of Fe₃O₄ octahedra, the possible mechanism was discussed to elucidate the formation of the octahedral Fe₃O₄microcrystals. Triethanolamine and hydrazine hydrate play important roles in the formation of the final products. The magnetic property of sample was evaluated on a vibrating sample magnetometer (VSM) at room temperature. The values of saturation magnetization and coercivity of octahedral Fe₃O₄are about 103 emu/g and 157 Oe, respectively. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

An X‐ray powder diffraction study of the microstructural evolution on heating 3:2 and 2:1 mullite single‐phase gels

Single‐phase gels with compositions 3Al₂O₃·2SiO₂ and 2Al₂O₃·SiO₂ were prepared by gelling mixtures of aluminium nitrate and tetraethylorthosilicate. Gels were fast heated at different temperatures between 900°C and 1600°C. The phase transformation and microstructural changes of both mullite precursor gels over the temperature range were followed by X‐ray powder diffraction (XRD), lattice parameter determination (LP), and scanning and transmission electron microscopies (SEM and TEM). The distribution of crystallite sizes and strains were determined by linewidth refinements of X‐ray diffraction patterns using the integral breadth method of Langford and the Warren‐Averbach analysis. XRD of both heated gels showed the formation of crystalline mullite single phase. Some amount of glassy phase coexisted with mullites at low temperatures, i. e. below 900°C. The compositional range of mullites formed on heating gels at temperatures between 900°C and 1600°C was dependent on the starting nominal composition of gels. SEM and TEM micrographs of both heated gels below 1200°C showed the formation of small, discrete, prismatic, well‐shaped nanocrystals in a very ordered arrangement. The size of these nanocrystals was dependant on the nominal composition of gels and increased on rising the heating temperature of gel precursors. The microstructural features obtained from linewidth refinement results of X‐ray diffraction patterns also allowed to suggest the formation of prismatic a little elongated nanocrystals at temperatures below 1200°C. Microstrain values were small and only displayed a relatively significant value for mullites processed at 900°C. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of magnetite nanocrystals

Nanocrystals of magnetite (Fe₃O₄) were prepared by sol‐gel technique. The prepared nanocrystals were characterized for phase by powder X‐ray diffraction (XRD) of the samples annealed at successively higher temperature. The magnetite phase was formed during the annealing of the synthesized powder at 400 °C for a few hours. The Fourier transform infrared spectroscopy (FTIR) was performed to analyze the functional groups in the material. The energy dispersive X‐ray diffraction (EDAX) was performed for chemical composition analysis. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques were used to analyze the morphology of nanocrystals and for estimating their average size. The results confirm the formation of Fe₃O₄nanocrystals of the sizes ∼20–50 nm. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Rapid synthesis of dendrite‐ and platelet‐like α‐Fe2O3 via a hydrothermal oxidation route

Dendrite and platelet‐like α‐Fe₂O₃ microcrystals were synthesized by the oxidation reaction of K₄Fe(CN)₆and NaClO₃ through a simple hydrothermal method. The structures and morphologies of the as‐prepared samples were characterized in detail by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The experiment results show that NaOH played an important role in controlling the morphology of the final products. The possible mechanism was discussed to elucidate the formation of different morphologies of the α‐Fe₂O₃ microstructures. Besides, the magnetic property of the dendrite α‐Fe₂O₃ microstructure was characterized by a vibrating sample magnetometer (VSM). (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ag@Fe3O4 nanowire: fabrication,characterization and peroxidase‐like activity

With a facile solvothermal method, Ag@Fe₃O₄ nanowire was successfully prepared and characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The obtained Ag@Fe₃O₄ nanowire posses enhanced peroxidase‐like activity with good stability and high absorbance. The optimization of pH, H₂O₂ concentration and loading capacity were carried out. The result of kinetic analysis indicates that the catalyzed reaction followed a Michaelis‐Menten behavior. The good peroxidase‐like activity makes Ag@Fe₃O₄ nanowire be promising for real application in biomedicine.     

Vanadium pentoxide nanobelts: One pot synthesis and its lithium storage behavior

In this paper, we report a synthesis, characterization and electrochemical properties of V₂O₅ nanobelts. V₂O₅ nanobelts have been prepared via hydrothermal treatment of commercial V₂O₅ in acidic (HCl/H₂SO₄) medium at relatively low temperature (160 °C). The hydrothermally derived products have been characterized by powder X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), Raman spectroscopy, X‐ray photo electron spectroscopy (XPS), UV‐Vis spectroscopy, Scanning/Transmission electron microscopy (SEM/TEM). XRD pattern of V₂O₅ nanobelts show an orthorhombic phase. From the FTIR spectrum, the peak observed at 1018 cm⁻¹ is characteristic of the stretching vibration mode of the terminal vanadyl, V = O. The UV‐Vis absorption spectrum of V₂O₅ nanobelts show maximum absorbance at 430 nm, which was blue‐shifted compared to that of bulk V₂O₅. TEM micrographs reveal that the products consist of nanobelts of 40‐200 nm in thickness and several tens of micrometers in length. The electrochemical analysis shows an initial discharge capacity of 360 mAh g⁻¹ and its almost stabilized capacity is reached to 250 mAh g⁻¹ after 55 cycles. A probable reaction mechanism for the formation of orthorhombic V₂O₅ nanobelts is proposed.     

Fabrication of ferric oxide/reduced graphene oxide/cadmium sulfide heterostructure photoelectrode for enhanced photoelectrochemical performance

A novel high‐efficiency photoelectrode (Fe₂O₃/reduced graphene oxide/CdS) built from heterostructure and conductive scaffold has been successfully designed and synthesized. Reduced graphene oxide works as a “bridge” which benefits for electron and hole transport. The obtained heterostructure photoelectrodes were systematically characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectroscopy, and X‐ray photoelectron spectroscopy (XPS). The photoconversion efficiency (η) and photocurrent densities vs. time (I‐t) curves responding to monochromatic lights have been further investigated in‐depth, which reveals that introduction of CdS and reduced graphene oxide played an important role in the enhancement of photoelectrochemical performance.     

α‐Fe2O3 nanospindles loaded with ZnO nanocrystals: Synthesis and improved gas sensing performance

ZnO/α‐Fe₂O₃ nanocomposites were fabricated through a two‐step hydrothermal method. The morphology and composition of the as‐synthesized products were characterized by X‐ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), energy‐dispersive X‐ray spectroscopy (EDS), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The gas sensing properties of the fabricated products were investigated towards ethanol, acetone, propanol, isopropanol, formaldehyde, chloroform and so on. The results demonstrated that the ZnO/α‐Fe₂O₃ nanocomposites exhibited excellent sensing properties and showed remarkably higher sensing responses and much lower optimum operating temperature compared to individual ZnO and α‐Fe₂O₃. In addition, the ZnO/α‐Fe₂O₃ nanocomposites have some selectivity for ethanol, propanol and isopropanol. The possible gas sensing mechanism was also proposed. Our studies demonstrate that our fabricated materials could be widely used in the future.     

XRD,IR, and Raman investigations of structural properties of Dy2‐xHox O3 prepared by sol gel procedure

The Rare earth mixed oxides Dy_2‐xHo_x O₃ (0.0 ≤ x ≤ 2.0) solid solution was synthesized by a sol–gel process. X‐ray diffraction (XRD) data were collected and crystal structure and microstructure analyses were performed applying Rietveld refinement method. Infrared and Raman spectroscopy were used to define the microstructure and to locally probe the structure of the samples. The cationic distribution over the two non‐equivalent sites 8b and 24d of the space group Ia3 is found to be randomly. The crystallite size and microstrain as well as Raman modes positions are influenced by Ho³⁺ concentration. The apparent size is isotropic but significant anisotropy is found for the microstrain with its largest value along the crystallographic direction [h00]. Inspite the single phase solid solution confirmed by Rietveld analysis for all samples, Raman spectra detected the coexistence of two phases; cubic and distorted monoclinic of too small amount or highly disordered, i.e. amorphous like, to be detected by XRD. The result indicates the ability of Raman spectroscopy to detect minor phases in solid solutions. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Room‐temperature synthesis and characterization of cross‐like Pr2(C2O4)3·10H2O micro‐particles

Cross‐like Pr₂(C₂O₄)₃·10H₂O micro‐particles were synthesized through a simple precipitation method at room temperature. The products were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), field‐emission scanning electron microscopy (FESEM), thermogravimetry–differential thermal analysis (TG‐DTA) and photoluminescence (PL). The possible formation mechanism of the cross‐like Pr₂(C₂O₄)₃·10H₂O micro‐particles was discussed, and Pr₆O₁₁ with similar morphology was obtained by calcining the oxalate precursor. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Zr‐doped CeO2 Hollow slightly‐truncated nano‐octahedrons: One‐pot synthesis,characterization and their application in catalysis of CO oxidation

Zirconium‐doped ceria hollow slightly‐truncated nano‐octahedrons (HTNOs) (Ce_1‐xZr_xO₂) were synthesized by a one‐pot, facile hydrothermal method. The morphology and crystalline structure were characterized with powder X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and the high resolution transmission electron microscopy (HRTEM). The composition and chemical valence on the surface of the as‐prepared Ce_1‐xZr_xO₂ powders were detected by X‐ray photoelectron spectroscopy (XPS) and energy dispersive spectrometry (EDS). The surface area and pore size distribution of as‐obtained Zr‐doped ceria HTNOs were measured by N₂ adsorption‐desorption measurement. Mechanisms for the growth of Zr‐doped ceria HTNOs are proposed as both oriented attachment and Ostwald ripening process and the formation of the hollow structure is strongly dependent on the addition of Zr⁴⁺ ions. Furthermore, the as‐obtained Zr‐doped ceria HTNOs revealed superior catalytic activity and thermal stability toward CO oxidation compared to pure ceria. It may provide a new path for the fabrication of inorganic hollow structures on introducing alien metal ions.     

A study of the growth process of Co3O4 microcrystals synthesized via a hydrothermal method

Pure Co₃O₄ microcrystals were prepared by a hydrothermal method from Co(NO₃)₂·6H₂O and urea solution, and the effect of thermal treatment time on the growth of Co₃O₄ microcrystals was studied by X‐ray diffraction (XRD), scanning electron microscopy (SEM), Raman and UV‐Vis absorption spectra. The results show that with the thermal treatment time increases from 2 h to 12 h, the shape of as‐prepared Co₃O₄ microcrystals changes from the hedgehog sphere‐like to the as‐cubic one that were stacked by lots of lamella, and finally cubes, and then longer time treatment will only lead to the size growth and agglomeration of particles. In conclusion, the cubic Co₃O₄ microcrystals of uniform size (∼6 μm) are synthesized via a 12‐h thermal treatment. Moreover, the synthesis mechanism has been studied.     

Synthesis and characterization of strontium chloroborate whiskers

Single crystalline strontium chloroborate (Sr₂B₅O₉Cl) whiskers with uniform diameter have been synthesized by a facile route based on the calcination of precursor. The precursor was prepared by the sedimentation reaction between SrCl₂ and Na₂B₄O₇ aqueous solution. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared spectrum (FT‐IR). An optimal synthesis temperature for preparing Sr₂B₅O₉Cl whiskers was obtained, and the possible formation process was also presented.     

X‐ray diffraction refinement of the crystal structure of anosovite prepared from leucoxene

The crystal structure of anosovite, (Ti_1.69Al_0.26Fe_0.05)³⁺(Ti_0.97Zr_0.03)⁴⁺O₅, prepared by carbothermal reduction of leucoxene under vacuum at 1450°C has been refined by Rietveld method using powder X‐ray diffraction data. It was found that it represents slightly monoclinically deformed pseudobrookite type structure with lattice parameters a = 9.8111 Å, b = 3.7509 Å, c = 9.9468 Å, β = 90.628°. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Hydrothermal growth of boron nitride microcrystals

Boron nitride (BN) crystals with size of several micrometers have been successfully synthesized by hydrothermal method. The reactants used in our experiments were boric acid (H₃BO₃), sodium azide (NaN₃) and white phosphor (P). The samples were characterized by X‐ray diffraction (XRD), Fourier transformation infrared spectroscopy (FTIR), selective area electron diffraction (SAED). It is found that the existence of Cl^‐ in the reaction mixture has much effect on the synthesis of BN. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Controllable synthesis of novel In2O3 nanostructures and their field emission properties

Three kinds of novel indium oxide (In₂O₃) nanostructures, namely, nanorods, nanoflowers and nanowhiskers were synthesized on silicon substrate via a simple vapor‐phase transport method under atmospheric pressure. The In₂O₃nanostructures were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), and energy‐dispersive X‐ray spectrometer (EDS) spectrum. The Raman spectra of these nanostructures showed four sharp scattering peaks centered at 308, 365, 522, and 628 cm^‐1, whose position and intensity were characteristic of standard Raman spectra for In₂O₃. The Room‐temperature photoluminescence (PL) spectra showed visible emissions centered around 576, 592, and 624 nm. Field emission measurements demonstrated that the nanoflowers possessed the best performance with a turn‐on field of 3.54 V/µm and a threshold field of 9.83 V/µm. And the field enhancement factors of these nanostructures are high enough for the application of field emission display devices. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Fabrication of cobalt ferrite nanostructures and comparison of their electrochemical properties

Cobalt Ferrite (CoFe₂O₄) nanorods and nanorings have been successfully controllable synthesized by solvothermal method. The specific characteristics were confirmed by X‐ray diffraction studies (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM). The measurement of their electrochemical properties as supercapacitor electrode materials indicate different morphological characterizations have various capacitive effects, and CoFe₂O₄ nanorings generally have larger specific capacitances than nanorods at different scan rates and current densities in 1.0 M KOH solution.     

Synthesis of spindle‐shaped α‐FeOOH and α‐Fe2O3 nanocrystals

Spindle‐shaped α‐FeOOH nanocrystals were facilely synthesized using a poly (vinyl pyrrolidone) (PVP)‐assisted route under hydrothermal conditions. The chemical compositions and morphol‐ogies of the as‐prepared samples were characterized in detail by X‐ray power diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscope (TEM). The experimental results reveal that these spindle‐shaped α‐FeOOH nanocrystals have self‐organized into assemblies with hierarchical nanostructures. The crucial roles of PVP in the hydrothermal synthesis of hierarchical α‐FeOOH nanostructures were discussed. The possible formation mechanism was also suggested. Moreover, the spindle‐shaped α‐Fe₂O₃ nanocrystals could be easily obtained after calcining the α‐FeOOH prepared by the PVP‐assisted hydrothermal process. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)