785 nm激光诱导银纳米三角片聚集表面增强拉曼散射效应

为实现表面增强拉曼散射（SERS）光谱的强信号快速检测分析,报道了通过785 nm激光诱导银纳米三角片（AgNPRs）聚集的方法。采用配体辅助化学还原法制备了AgNPRs,其边长约为80 nm,表面等离子体吸收峰出现在约774 nm处,对785 nm光产生有效吸收。在785 nm光辐照下,AgNPRs逐渐聚集,对巯基苯甲酸的SERS信号逐渐增强,其源于AgNPRs吸收的光转化为热而引起的AgNPRs聚集。其增强因子高达10⁹。为快速获得强SERS信号,激发光功率需大于250 mW。     

SERS studies of isolated and agglomerated gold nanoparticles functionalized with a dicarboxybipyridine‐trimercaptotriazine‐ruthenium dye

A dicarboxybipyridine‐trimercaptotriazine ruthenium complex, primarily designed for dye solar cells, has been successfully employed for generating electrostatically stabilized gold colloids, because of its high negative charge and capability of binding to gold nanoparticles via the sulfur groups. Surprisingly, a strong surface‐enhanced Raman scattering enhancement has been observed for the isolated nanoparticles, exceeding those recorded after inducing agglomeration. Such unusual response has been ascribed to the predominant contribution of the charge‐transfer and resonance Raman mechanisms, more than compensating for the lack of the local hot spots, in relation to the agglomerated systems. Copyright © 2014 John Wiley & Sons, Ltd.     

SERS intensity optimization by controlling the size and shape of faceted gold nanoparticles

In this work, we experimentally investigated the surface‐enhanced Raman spectroscopy (SERS) activity of faceted gold nanoparticles, which have been theoretically predicted to yield giant enhancements. Glycine was used to determine the SERS activity as a function of pH and ionic strength and to estimate the corresponding enhancement factor (EF). By optimizing the synthesis conditions of the flat prismatic nanoparticles, it was possible to control their size and shape. We demonstrate that the maximum SERS intensity increases with the edge length of the triangle, reaching a maximum EF of ∼10¹³ for 1.9 µm triangles (the largest tested). The corresponding glycine detection limit was as low as 10⁻¹² M , close to the single‐molecule threshold. Copyright © 2007 John Wiley & Sons, Ltd.     

SERS detection of polychlorinated biphenyls using β‐cyclodextrin functionalized gold nanoparticles on agriculture land soil

A highly sensitive surface‐enhanced Raman scattering (SERS) platform for the selective trace analysis of persistent organic pollutant (POP) such as polychlorinated biphenyl (PCBs) was reported based on β‐CD modified gold nanoparticles (AuNPs) with the real environmental sample of polluted soil. The synthesized gold nanoparticles were characterized using UV–vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD) and transmission electron microscopy (TEM). In polluted soil the presentation of PCB is confirmed by using GC‐MS. It is further verified and confirmed by using SERS. When the contaminated soil was added to the system, the binding of soil with β‐CD resulted in the aggregation of AuNPs, and excellent Raman signal was obtained which can reflect the isomers of polychlorinated biphenyls. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of different gold nanostructures by solar radiation and their SERS spectroscopy

In this article, a simple and novel photochemical synthesis of different gold nanostructures is proposed using solar radiation. This method is rapid, convenient and of low cost, and can be performed under ambient conditions. By adjusting the concentration of sodium acetate (NaAc), different morphologies of the products can be easily obtained. Without NaAc, the products obtained are mainly polyhedral gold particles; lower concentration of NaAc (0.05 and 0.1 M) accelerates the formation of flowerlike gold nanostructures; while higher concentration of NaAc (0.5 M) facilitates the formation of a variety of gold nanowires and nanobelts. It is found that the morphology change of gold nanaostructures is the result of the synergistic effect of poly(diallyl dimethylammonium) chloride (PDDA), Ac⁻ ions, and the pH value. In addition, the different gold nanostructures thus obtained were used as substrates for surface‐enhanced Raman scattering (SERS) with p‐aminothiophenol (p‐ATP) as the probe molecule. In comparison, the flowerlike gold nanostructures show stronger SERS effect than the other gold nanostructures, which is associated with their unique geometrical shapes providing highly localized electromagnetic (EM) field for the optical enhancement to the probe molecules. These gold nanostructures, with different geometrical shapes, might have potential applications in the areas of photonics, optoelectronics and optical sensing. Copyright © 2009 John Wiley & Sons, Ltd.     

Quantification of DNT isomers by capillary liquid chromatography using at‐line SERS detection or multivariate analysis of SERS spectra of DNT isomer mixtures

With the global surge of terrorism and the increased use of bombs in terrorist attacks, national defence and security departments now demand techniques for quick and reliable analysis, in particular, for detection of toxic and explosive substances. One approach is to separate different analytes and matrix material before detection. In this work microliquid chromatography was used to separate two dinitrotoluene (DNT) isomers prior to detection via online UV–Vis spectroscopy. For identification, retention times were compared with reference samples and quantification was done by integration of UV–Vis absorption. Because UV detection is not particularly selective, Raman microscopic analysis was coupled to the liquid chromatography using a flow‐through microdispenser. Because DNT is difficult to detect with conventional Raman spectroscopy, the sensitivity was increased via surface‐enhanced Raman scattering (SERS) using silver‐quantum dots. Different analytical approaches to identify and quantify mixtures of two DNT isomers were evaluated. Good quantitative results were obtained using UV detection after microchromatographic separation (Limit of Detection: 0.11 and 0.06 for 2,4‐DNT and 2,6‐DNT). Coupling with SERS allowed for more confident differentiation between the highly structurally similar DNT isomers because of the additional spectral information provided by SERS. The application of a partial least squares algorithm also allowed direct SERS detection of DNT mixtures (root mean square error of prediction: 0.82 and 0.79 mg·L^–1 for 2,4‐DNT and 2,6‐DNT), circumventing the time‐consuming separation step completely. Copyright © 2012 John Wiley & Sons, Ltd.     

Spectral characterization and intracellular detection of Surface‐Enhanced Raman Scattering (SERS)‐encoded plasmonic gold nanostars

Plasmonic gold nanostars offer a new platform for surface‐enhanced Raman scattering (SERS). However, due to the presence of organic surfactant on the nanoparticles, SERS characterization and application of nanostar ensembles in solution have been challenging. Here, we applied our newly developed surfactant‐free nanostars for SERS characterization and application. The SERS enhancement factors (EF) of silver spheres, gold spheres and nanostars of similar sizes and concentration were compared. Under 785 nm excitation, nanostars and silver spheres have similar EF, and both are much stronger than gold spheres. Having plasmon matching the incident energy and multiple ‘hot spots’ on the branches bring forth strong SERS response without the need to aggregate. Intracellular detection of silica‐coated SERS‐encoded nanostars was also demonstrated in breast cancer cells. The non‐aggregated field enhancement makes the gold nanostar ensemble a promising agent for SERS bioapplications. Copyright © 2012 John Wiley & Sons, Ltd.     

Effects of electrolytes on the fabrication of three‐dimensional nanoporous gold films by a rapid anodic potential step method for SERS

A unique one‐step anodic potential step strategy has been developed recently by our group to fabricate a three‐dimensional (3D) nanoporous gold film (NPGF) within 1 min as an efficient surface‐enhanced Raman scattering (SERS) active substrate. Gloria et al. (J. Electroanal. Chem. 2011, 656, 114–119) demonstrated that the prepared NPGF under optimum conditions (2 M HCl, 50 s) has higher SERS intensities than that of a commercial single‐use gold substrate. However, the SERS performance of 3D NPGFs fabricated in neutral KCl by this strategy have not been investigated. In this paper, SERS performances of the NPGFs fabricated in electrolytes of KCl and HCl are compared for the first time, using pyridine as a test molecule. Equivalent SERS intensities can be obtained on the 3D NPGFs prepared in these two electrolytes under respectively optimum conditions. The results suggest that hot spots of nanogaps and crevices because of the aggregation/coalescence of gold nanoparticles and the formation/removal of thin gold oxide coatings contribute greatly to the high SERS activity. Copyright © 2012 John Wiley & Sons, Ltd.     

Single‐molecule detection of thionine on aggregated gold nanoparticles by surface enhanced Raman scattering

We report observations of single‐molecule detection of thionine and its dynamic interactions on aggregated gold nanoparticle clusters using surface enhanced Raman scattering (SERS). Spectral intensities were found to be independent of the size of Au nanoparticles studied (from 17 to 80 nm) at thionine concentration below 10⁻¹² M or at single‐molecule concentration levels. Raman line separations and, in particular, spectral fluctuations and blinking were also observed, suggesting temporal changes in single molecular motion and/or arrangements of thionine on Au nanoparticle surfaces. In contrast, by using dispersed Au nanoparticles, only ensemble SERS spectra could be observed at relatively high concentrations (> 10⁻⁸ M thionine), and spectral intensities varied with the size of Au nanoparticles. Copyright © 2007 John Wiley & Sons, Ltd.