Rain Attenuation Ratios on Short Microwave and Millimeter Wave Bands Earth-Space Paths

The knowledge of the ratio of rain attenuation at one frequency to that at another on slant paths is useful for the design of satellite-to-Earth communication links and up-link power control systems. It is well known that the rain attenuation is influenced by parameters of precipitation along the slant path such as DSD (raindrop size distribution), raindrop temperature, rainfall rate, and so on. In this paper, based on several DSDs applied to various climate zones, at short microwave and long millimeter wave bands, the attenuation ratios are estimated on Earth-space paths. A comparison of the prediction results with the experiment data in Boston and Kashima areas is carried out. It is shown that the M-P and Weibull DSD applied to rain attenuation ratios estimation are better DSD at higher latitude regions. The Guangzhou DSD applied to rain attenuation ratios prediction is better in tropical and subtropical areas in China. The lognormal DSD may be a appropriate DSD applied to predict rain attenuation ratios in tropical areas at A_down>1dB or R>15mm/h. However, the attenuation ratios predicted by the Guangzhou DSD disagree with by the lognormal DSD, it requires that the DSD applied to predict rain attenuation ratios are further studied in tropical areas.     

Some problems relating to the vertical profile of the aerosol attenuation coefficient in the atmosphere for wavelengths of 0.5–6μ

A calculation of the aerosol attenuation coefficients based on optical measurements along horizontal and inclined direction paths in the atmosphere is discussed. The spectral characteristics of the aerosol attenuation coefficients at various heights in the atmosphere so obtained are compared with the results of calculations based on the microphysical characteristics of an aerosol. Various conclusions are drawn as to the possibilities of simulating the vertical profile of the aerosol attenuation coefficient.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 5, pp. 98–103, May, 1972.     

The Study of MMW and MW Attenuation Considering Multiple Scattering Effect in Sand and Dust Storms at Slant Paths

The influence of sand and dust storms on modern MMW and satellite communication systems reliability have been paid more attention to. The attenuations induced by sand and dust storms are estimated by means of Mie-theory and Rayleigh approximation, in the case of the tenuous distribution of particles. With the particle density increasing, however, these method become inadequate, the multiple scattering effects then become dominant for attenuation estimation. The attenuations considering multiple scattering effects are estimated by Monte-Carlo and four fluxes method at horizontal paths. At slant paths, based on multi-layer media model, the attenuations considering multiple scattering effects are calculated by layered Monte-Carlo method at 100, 37, 24, and 14GHz. It is shown that the multiple scattering effects should be considered at the attenuation prediction in the sand and dust storm, which the visibility is about 0.5km and smaller than 0.5km and frequency is about 20GHz. Above 30GHz, the multiple scattering effects due to sand and dust particles should be considered, as visibility is about 1km and smaller than 1km at slant paths.     

大功率折叠式封离型CO2激光器

给出大功率折叠式封高型ＣＯ２激光器的设计思想和稳定性。     

Electron inelastic mean free paths and energy losses in solids II: Electron gas statistical model

A statistical model for the calculation of inelastic mean free paths and energy losses of electrons in solids is described. Results for the application of the model to the six solid media Al, Au, Ag, Cu, Ni, and Si are presented. Agreement between calculated mean free paths and experimental attenuation lengths indicates that the statistical model provides a useful method in the little-studied electron energy range from a few tens of electron volts to 10 keV.     

单程大气传输的能量衰减研究

本文对激光束在大气传输中能量衰减的主要原因进行了分析，给现单程水平，垂直和斜路径大气传输的能量衰减表达式。     

Methods of measuring the attenuation of hearing protection devices

The published literature describing three real-ear-attenuation-at-threshold (REAT), nine above-threshold, and four objective methods of measuring hearing protector attenuation is reviewed and analyzed with regard to the accuracy, practicality, and applicability of the various techniques. The analysis indicates that the REAT method is one of the most accurate available techniques since it assesses all of the sound paths to the occluded ear and, depending upon the experimenter's intention, can reflect actual in-use attenuation as well. An artifact in the REAT paradigm is that masking in the occluded ear due to physiological noise can spuriously increase low-frequency (less than or equal to 500 Hz) attenuation, although the error never exceeds approximately 5 dB, regardless of the device, except below 125 Hz. Since the preponderance of available data indicates that attenuation is independent of sound level for intentionally linear protectors, the use of above-threshold procedures to evaluate attenuation is not a necessity. An exception exists in the case of impulsive noises, for which the existing data are not unequivocal with regard to hearing protector response characteristics. Two of the objective methods (acoustical test fixture and microphone in real ear) are considerable time savers. All objective procedures are lacking in their ability to accurately determine the importance of the flanking bone-conduction paths, although some authors have incorporated this feature as a post-measurement correction. The microphone in real-ear approach is suggested to be one of the most promising for future standardization efforts and research purposes, and the acoustical test fixture technique is recommended (with certain reservations) for quality control and buyer acceptance testing.     

深海本地界面混响平均强度模型与规律分析

为揭示深海多途传播效应及界面参数对本地界面混响强度的影响规律,将界面混响表述为不同多途混响衰落过程的非相干叠加结果,并结合界面散射的若干物理机制,建立了以海面海底物理参数为变量的混响强度模型.通过数值仿真和理论分析研究了不同多途混响强度的衰落特性、到达角的空间分布及部分物理参数对混响强度的影响,并利用南海海盆(典型泥质海底)实验数据对模型有效性进行验证.仿真结果表明,界面混响强度随时间变化呈现多峰结构,峰值时间与多途混响的到达时间分布一致。声源与接收器均位于近海面处时,首峰的峰值强度及其衰落过程由海面风速决定,其它峰的峰值强度由海面海底参数共同决定,但其衰落过程主要受到底质参数的影响.      

An improved lumped parameter model predicting attenuation of earmuff with air leakage

Since air leakage is inevitable when earmuffs are worn improperly or together with safety glasses in factory or military, it is required to be considered to accurately predict earmuff attenuation. Besides unwanted air leakage, under controlled air leakage is introduced to earmuff to achieve adjustable attenuations in different signal-to-noise ratios (SNRs) and balance between attenuation and speech intelligibility. This work is to develop an improved lumped parameter model (LPM) to predict earmuff attenuation with consideration of air leakage. Air leakage paths are introduced into conventional LPM without air leakage, and air leakage path impedance is analytically described by Maa's microperforated tube impedance. Earmuff passive attenuation behavior can be analytically described and analyzed with the improved LPM. Finally, the validity of improved LPM is verified experimentally. The results indicate that the improved LPM can predict earmuff attenuation with air leakage, and air leakage deteriorates earmuff attenuation and turns resonance frequency higher.     

A simple model of ultrasound propagation in a cavitating liquid. Part II: Primary Bjerknes force and bubble structures

In a companion paper, a reduced model for propagation of acoustic waves in a cloud of inertial cavitation bubbles was proposed. The wave attenuation was calculated directly from the energy dissipated by a single bubble, the latter being estimated directly from the fully nonlinear radial dynamics. The use of this model in a mono-dimensional configuration has shown that the attenuation near the vibrating emitter was much higher than predictions obtained from linear theory, and that this strong attenuation creates a large traveling wave contribution, even for closed domain where standing waves are normally expected. In this paper, we show that, owing to the appearance of traveling waves, the primary Bjerknes force near the emitter becomes very large and tends to expel the bubbles up to a stagnation point. Two-dimensional axi-symmetric computations of the acoustic field created by a large area immersed sonotrode are also performed, and the paths of the bubbles in the resulting Bjerknes force field are sketched. Cone bubble structures are recovered and compare reasonably well to reported experimental results. The underlying mechanisms yielding such structures is examined, and it is found that the conical structure is generic and results from the appearance a sound velocity gradient along the transducer area. Finally, a more complex system, similar to an ultrasonic bath, in which the sound field results from the flexural vibrations of a thin plate, is also simulated. The calculated bubble paths reveal the appearance of other commonly observed structures in such configurations, such as streamers and flare structures.     

Prediction of the attenuation of a filtered custom earplug

A method has been developed to predict the attenuation of an earplug when filtered by passive resistive elements (dampers). The method is based on the assumption that sound transmission paths traveling through the damper element and through the earplug are independent, hence their respective sound energies simply add to each other. This hypothesis was validated with measurements on both an acoustical test fixture and on human subjects, using a commercially available expandable custom earplug. This earplug features a sound-bore that can either be used for an F-MIRE (Field microphone-in-real-ear) attenuation measurement or be fitted with a damper in order to adapt the amount of attenuation to the wearer’s needs. The uncertainty associated with the proposed prediction method was formulated and quantified using REAT and F-MIRE attenuation measurements on human subjects. An initial experimental verification of the prediction method, on a limited number of subjects, has been successfully completed.     

PERFORMANCE AND DYNAMIC STABILITY OF GENERAL-PATH CENTRIFUGAL PENDULUM VIBRATION ABSORBERS

Centrifugal pendulum vibration absorbers are a type of tuned dynamic absorber used for the attenuation of torsional vibrations in rotating and reciprocating machines. They consist of masses that are constrained to move along specific paths relative to the rotational axis of the machine. Previous analytical studies have considered the performance of single absorber systems with general paths and of multi-absorber systems with a specific path type. In this paper, we investigate the performance and dynamic stability of systems comprised of multiple, identical centrifugal pendulum vibration absorbers riding on quite general paths. The study is carried out by considering a scaling of the system parameters, based on physically realistic ranges of dimensionless parameters, which permits application of the method of averaging. It is found that the performance of these systems is limited by two distinct types of instabilities. In one type, the system of absorbers lose their synchronous character, while in the other a classical non-linear jump affects all absorbers identically, leading to highly undesirable system behavior. These results are used to evaluate two common types of absorber paths, namely circles and cycloids, including intentional mistuning of the absorber frequencies. The results are used to make some recommendations about the selection of paths to achieve design goals in terms of absorber performance and operating range. The analytical predictions are confirmed by numerical simulations.     

Millimeter wave attenuation in relation to rain rate distribution over a tropical station

Rain, perhaps, is the worst offender for utilising Millimeterwaves in practice. This paper describes the rain rate distribution from which millimeterwave attenuation distribution have been attempted. Results reveal that in our location (Calcutta: lat 23°N long 88.5°E) the rain rate distribution fits well with normal distribution. The cumulative distribution of rain rate also prompted the present authors to find out rain attenuation cumulative distribution for both terrestrial and earth-space paths in millimeterwave band.     

Long-range sound propagation in the Mediterranean Sea

The data of several experiments on the long-range propagation of explosion-generated and tonal sound signals are analyzed. The experiments are performed by the Acoustics Institute in the Mediterranean Sea with a fully developed sound channel. A substantial difference is observed for the propagation conditions in the western and eastern parts of the sea. This difference concerns the vertical sound speed profiles, the time structures of the sound field in the underwater sound channel, the duration of the explosion-generated signal, and the positions of the convergence zones. The experiment is compared with calculations. The observed difference in the experimental and calculated positions of the first convergence zone is explained by the imperfection of the relation used to recalculate the salinity, water temperature, and hydrostatic pressure to the sound speed. In spite of substantial difference in the propagation conditions on two 600-km paths, the experimental low-frequency attenuation coefficients on these paths (and on some shorter ones) agree well with each other for the frequency band of several kilohertz. The data are also close to those published for another 600-km path. All the paths mentioned run in different parts of the Mediterranean Sea. The frequency dependence of sound attenuation (absorption) can be well described by the relation that accounts for the absorption caused by the boron present in the sea water.     

Direct imaging through scattering media by use of efficient third-harmonic generation in organic materials

We report on real-time, time-gated, direct imaging through scattering media with an attenuation of 14 mean-free paths by use of third-harmonic generation in the eye-safe and telecommunication-compatible near-IR spectral region (1550 nm).     

Long-path measurements of ultrasonic attenuation and velocity for very dilute slurries and liquids and detection of contaminates

The objective was to use multiple paths through the slurry to determine the lowest concentration that provided accurate attenuation measurements and to measure the velocity of sound through an effective long path. Ultrasonic attenuation measurements were obtained for slurries of silica (10 microm diameter) in water for concentrations of 0.1%, 0.25%, 0.5%, 0.75% and 1% silica by weight. Attenuation measurements for concentrations less than 0.1% may prove useful for process control to detect contaminants. A long path is obtained due to multiple reflections occurring within the stainless steel (SS) vessel used; broad-band transducers are affixed on the outside of the thick-walled vessel. The signal in the receive transducer permits the measurement of the attenuation and also the velocity by measuring the time-of-flight. The FFT of the appropriate signal for each echo was obtained and compared with that for water to yield the attenuation as a function of frequency. The attenuation measurements are self-calibrating because they are not affected by changes in the pulser voltage. The data show the feasibility for measuring a concentration of 0.025 wt% silica, which is equivalent to 0.25 g of silica in 1 l of water. Therefore, such measurements can prove useful for detecting contaminants in liquid. The velocity of sound measurements for solutions of hydrogen peroxide in water were obtained and accurate to about 0.3m/s, or 0.02% uncertainty.     

太赫兹大气传输特性实验研究

太赫兹在高速率通信、高分辨力雷达等方面具有广阔的应用前景,而对太赫兹辐射的大气传输特性及其规律进行系统的理论与实验研究则是发展利用该频谱资源的基础条件。对大气作用于太赫兹频段电磁辐射的吸收衰减进行了实验测试研究。通过双光路的差分系统设计,尽可能地减小太赫兹辐射源输出功率不稳定性所产生的系统误差,完成大气模拟环境下太赫兹波段多个频点传输的功率变化测定,以探索大气环境对不同频段THz波衰减的规律性;同时,建立太赫兹大气传输特性动态数据库对海量大气环境数据进行有效地分析,为实验数据处理及理论研究提供支持。收稿日期:; 修订日期:     

Orientation dependence of overlayer attenuation of electrons for the cylindrical mirror analyzer and a retarding field analyzer

The effect of a homogeneous flat overlayer in attenuating spectral lines is analyzed as a function of orientation for apertures corresponding to a 42.3° cylindrical mirror analyzer and 48° retarding field analyzer. Exponential attenuation with path length is assumed. Results are presented graphically for both isotropic and cosine distributions of sources. The numerical results are particularly useful when practical considerations require the use of an unsymmetrical sample orientation. The results are pertinent to measurements of inelastic mean free paths and are also related to the response of these spectrometers to different depth distributions of elements.     

Low energy electron attenuation length studies in thin amorphous carbon films

The results of experiments on low energy electrons passing through thin amorphous carbon films are reported. For electron energies between 50 and 3000 eV, electron attenuation lengths were determined by electron transmission measurements through carbon films of thicknesses between 81 and 210 Å. The density of these amorphous carbon films was also obtained by a sink—float method and found to be 1.90 ± 0.05 g cm^?3. The electron attenuation length for inelastic scattering was found to increase monotonically from approximately 10 to 55 Å over the 50 to 3000 eV range. Over the 500–3000 eV energy region, the results are in good agreement with mean free paths calculated using optically measured dielectric functions.     

FEEDFORWARD ALGORITHMS WITH SIMPLIFIED PLANT MODEL FOR ACTIVE NOISE CONTROL

Most feedforward active noise control (ANC) algorithms require models of electro-acoustic paths. To obtain satisfactory attenuation and keep the system stable these models have to represent the plant well. This, according to the literature, requires estimation of many, often hundreds of coefficients. Then, control filters also have very large, comparable structures. Such an approach reveals significant drawbacks if paths of the plant are subject to change. Estimation of so many plant models and control filter coefficients is very slow and time consuming. Therefore, the speed of adaptation is substantially reduced. This can be accepted in some unmoveable plants like acoustic ducts. However, there are many other plants, e.g., active personal hearing protection devices, in which rapid reaction is also of utmost interest not to annoy the user. In this paper, an alternative approach is proposed that does not need precise models except an estimate of the discrete time delay of the plant. However, according to the literature this leads to a relatively narrow attenuation band, which is confirmed for classical control structures like finite and infinite impulse response filters. This becomes a premise to design a new control algorithm. First, the so-called phase shifters (in two versions) are designed. They enable to control narrowband noise on comparable levels with at least an order less parameters than the filters mentioned above. To control broadband noise, the idea of phase shifter banks is then put forward. In turn, to extend the attenuation band conversion of sampling frequency is adopted to noise control problems. Finally, the algorithm combining advantages of phase shifter banks and conversion of sampling frequency allows controlling of any noise over any frequency band, with limits imposed only by the signal processor available and pass-band of the secondary source. Although this algorithm is designed generally and can be applied to any ANC plant, for laboratory experiments an active personal hearing protection device is used.