新型MCM-41-β-沸石中孔-微孔复合分子筛

ＭＣＭ－４１是１９９２年由Ｍｏｂｉｌ公司首次合成,具有可调的规整孔道结构,孔径大小为１．６～１０ｎｍ的六方中孔分子筛［１,２］,β－沸石是具有三维十二元环孔道,一条线性通道孔径为０．５７ｎｍ×０．７５ｎｍ,另一条由两种线性通道相交形成的弯曲通道,孔径...     

MCM-41介孔分子筛材料的氨微量吸附量热法酸性研究

Ｍｏｂｉｌ公司研究人员１９９２年首次报道的Ｍ４１Ｓ介孔分子筛材料,由于其孔径可在１５～１０ｎｍ间调变,从而打破了沸石分子筛合成的传统概念［１］;其中最重要的成员ＭＣＭ４１因其稳定的六角形结构而特别具有应用前景．近年来,有关此类材料的研究已引起各国...     

MCM-41分子筛的合成及129Xe核磁共振的研究

ＭＣＭ４１中孔分子筛是１９９２年由Ｍｏｂｉｌ公司的科学家Ｋｒｅｓｇｅ［１］等人首次合成的,并在《自然》杂志发表。这种中孔分子筛具有六角形孔径,孔径２ｎｍ～１０ｎｍ,这种分子筛的孔径可以通过水晶模板来控制［２］。已报道的合成ＭＣＭ４１,孔径一般在２．０ｎｍ～３．５ｎｍ,使用的水晶模板一般是单一或两种阳离子季铵盐表面活性剂［３,４］。本论文通过引入第二种扩孔模板,与阳离子季铵盐协同作用,合成了孔径５．２ｎｍ（ＢＥＴ法测）的ＭＣＭ４１。通过氮气的吸脱附,测定了分子筛的比表面和孔径等性质。Ｊ．Ｆｒａｉｓｓａｒｄ…     

混合表面活性剂模板法合成立方相介孔含钛氧化硅

自1992年Ｍｏｂｉｌ公司的Ｍ41Ｓ系列介孔氧化硅分子筛问世以来[1,2],借助表面活性剂液晶模板方法合成各种孔结构与不同大小孔径的硅基分子筛材料引起了人们的极大兴趣,目前多数工作仍然集中于六方相的介孔分子筛.具有双连续的三维交织立方排列孔道结构的ＭＣＭ48由于其孔道不易堵塞和良好的骨架结构稳定性[3,4],在催化、吸附和与其为载体的制备等方面具有独特的应用价值.但由于液晶模板形成立方相区的范围非常狭窄,相应的分子堆积比对模板剂分子几何结构要求较苛刻,采用单一表面活性剂为模板剂合成时,条件难以掌握,制备ＭＣＭ48十分困难.Ｈ…     

过渡金属掺杂MCM-48分子筛催化氧化α-二十碳醇制α-二十碳酸

中孔分子筛由于具有孔径大、吸附能力强和热稳定性好等特点而引起了国内外研究者的极大关注［１，２］．近年来，有关ＭＣＭ－４８的合成、结构表征及应用研究的报道甚少［３，４］．ＭＣＭ－４８分子筛因无酸性而催化活性较弱，因此，向其骨架中引入Ｔｉ、Ｚｒ、Ｃｒ和Ｃ...     

XRD粉末衍射法研究全微波合成的MCM-41介孔分子筛

ＭＣＭ４１是Ｍｏｂｉｌ公司九十年代开发的具有规整孔道的介孔分子筛,其潜在的应用前景已引起人们广泛关注［１,２］。目前,ＭＣＭ４１介孔分子筛的合成多为水热法［３］。该法操作较为繁琐,耗能费时,整个合成过程最快也需５～７天。１９８８年ＣｈｕＰ．［４］以专利形式报道了微波技术在分子筛合成中的应用,但对合成的具体细节未作任何描述。宋天佑［５］、Ｃｕｎｄｙ［６］等人在晶化阶段采用微波辐射法分别合成了ＮａＸ和ＭＣＭ４１介孔分子筛,但其有机模板剂的脱除(简称“脱模”)过程仍采用传统的高温焙烧法。作者首次采用全微波辐射…     

MCM－41中孔分子筛的合成及其性质

以十六烷基三甲基溴化铵（ＣＴＡＢ）作模板剂，研究了水热体系中中孔ＭＣＭ－４１分子筛的合成条件。在Ｈ_２Ｏ／Ｓｉ介于１２～１００，Ｓｉ／Ａｌ介于１０～∞，ＣＴＡＢ／Ｓｉ介于０．０８～０．２时，可以合成出ＭＣＭ－４１分子筛。在加入煤油等混合烃的合成体系中，可以合成出孔径大于４ｎｍ的ＭＣＭ－４１分子筛。用ＸＲＤ、ＳＥＭ、Ｎ_２吸附对合成样品加以表征，证明它们具有典型的中孔分子筛特性。探针反应证明它具有中强酸中心。     

FeZSM－5中不同化学环境的铁上乙苯氧化脱氢制苯乙烯的催化活性

ＦｅＺＳＭ－５中不同化学环境的铁上乙苯氧化脱氢制苯乙烯的催化活性张春雷，吴志芸，阚秋斌（吉林大学化学系，长春１３００２３）关键词ＦｅＺＳＭ－５沸石，铁，化学环境，乙苯，氧化脱氢，苯乙烯，多功能催化剂杂原子引入分子筛，除能调变分子筛的酸性和微孔孔径外，...     

晶化温度对MCM-41结晶度、酸性和骨架铝结构的影响

选择硅酸钠－硫酸铝－十六烷基三甲基氯化铵体系,在水热条件下合成ＭＣＭ－４１中孔分子筛,采用ＸＲＤ、ＩＲ、ＮＨ３－ＴＰＤ、２７Ａｌ－ＭＡＳＮＭＲ进行了晶化温度与ＭＣＭ－４１分子筛结构和性能的关联研究．结果表明,在晶化温度为１５０℃时,ＭＣＭ－４１分子筛的结晶度最高;适当提高晶化温度,ＭＣＭ－４１分子筛呈现出酸性增加、四铝配位环境趋于规则和弱酸中心逐渐消失的规律．     

高纯度中孔分子筛MCM—41的合成与表征

用不同ｐＨ值的混合制备了不同孔径的全硅ＭＣＭ－４１和不同金属离子取代的Ｍ－ＭＣＭ－４１（Ｍ－Ａｌ,Ｍｎ,Ｆｅ和Ｖ）分子筛。这些试样均呈现ＭＣＭ－４１的Ｘ射线粉末笛射特征峰和Ⅳ型氮气吸附等温线,但混有不同含量的无定形氧化硅。样品中ＭＣＭ－４１晶体的含量与溶胶的ｐＨ值和所用表面活性剂的碳链链长有关,骨架硅的金属离子取代降低了ＭＣＭ－４１的有序度,并且（１００）面衍射峰强度从Ａｌ到Ｖ依次减弱。     

(MCM-41)-La_2O_3纳米复合材料的制备、表征及光学性质

借助水热法,以正硅酸乙酯为硅源,十六烷基三甲基溴化铵为模板剂,在碱性条件下制备了纳米MCM-41分子筛。通过固相热扩散法将La2O3组装到MCM-41介孔孔道中,制备出含La2O3不同浓度的(MCM-41)-La2O3主-客体纳米复合材料。采用化学分析、粉末XRD、FTIR、77K低温N2吸附-解吸附、固体扩散漫反射吸收光谱、拉曼光谱、扫描电镜和发光光谱对主-客体复合材料进行表征。粉末XRD结果表明,La2O3组装到MCM-41分子筛的孔道后并未破坏分子筛骨架,在所制备的(MCM-41)-La2O3主-客体纳米复合材料中MCM-41骨架结构仍然具有较高的有序性,并且,随着植入客体材料浓度的增加复合材料的有序度有所降低。红外光谱表明所制备的纳米复合材料主体分子筛骨架完好;低温氮气吸附-解吸附技术表明La2O3已经部分地占据了MCM-41分子筛孔道,导致分子筛的比表面积和孔体积都有所降低;固体扩散漫反射吸收光谱表明吸收光谱的吸收峰发生了蓝移现象,并表现出量子限域效应,说明La2O3已经组装到了MCM-41分子筛的孔道中;拉曼光谱表明所制备的复合材料没有出现新的特征峰,表明La2O3已经组装到了MCM-41分子筛的孔道中;扫描电镜表明(MCM-41)-La2O3样品的外观非常规整,主要呈现的是球状结构,La2O3含量为10%时,(MCM-41)-La2O3的平均粒径为(114±10)nm。发光光谱研究结果表明,所制备的复合材料(MCM-41)-La2O3样品在396nm处具有较好的发光性质,因而具有作为发光材料潜在应用前景。     

Progress in Pore-Size Control of Mesoporous MCM-41 Molecular Sieve Using Surfactant Having Different Alkyl Chain Lengths and Various Organic Auxiliary Chemicals

Pore-size control of mesoporous silica MCM-41 molecular sieve is described on the basis of the use of surfactant having different alkyl chain lengths and various organic auxiliary chemicals during the hydrothermal synthesis process. The BJH pore diameter of MCM-41 can be tuned from 1.6 to 4.2 nm using single or mixture of two surfactant(s) with alkyl chain lengths varied from C₈ to C₂₂. By the addition of different organic auxiliary chemicals: 1,3,5-trimethylbenzene, isopropylbenzene or tridecane into the synthesis medium, the BJH pore size of MCM-41 can be tailored up to 12.0 nm.     

Effect of auxiliary chemicals on preparation of silica MCM-41

Silica MCM-41 materials were prepared hydrothermally by using 1,3,5-trimethylbenzene (MS) or 1,3,5-triisopropylbenzene (TI) as an auxiliary chemical. The BJH poressize of MCM-41 increased up to 12 nm with increasing amounts of MS. However, MCM-41 materials prepared with MS displayed irregular pore arrangements and a half of these materials exhibited low thermal and hydrothermal stabilities. On the other hand, MCM-41 materials prepared with TI as an auxiliary chemical displayed regular pore arrangements and high thermal and hydrothermal stabilities, but their BJH pore sizes did not go over 4.0 nm (intrinsic value; ca. 5 nm). MCM-41 prepared with TI together with a small amount of MS (TI/MS/SiO₂=1.5/0.5/1) displayed regular pore arrangements and high thermal and hydrothermal stabilities. Its BJH pore size was 4.7 nm (intrinsic value; ca. 6 nm).     

Selective Oxidation of Cyclic Hydrocarbons with H2O2 over Ti- and V-Containing Zeolites and Mesoporous Catalysts

Ti- and V-containing MFI, MEL and MCM-41 catalysts were studied in the oxidation of cyclohexane, cyclohexene, naphthalene, tetralin, decalin and phenol with H₂O₂. Although TS-1 and TS-2 exhibited the highest activity and selectivity in the oxidation of _n -hexane and 1-hexene, cyclohexene could only be oxidized effectively on the MCM-41 silicates. Since the oxidation of condensed aromatic systems over Ti- and V-containing MFI and MEL zeolites runs to difficulties, MCM-41 type catalysts may be offered for these reactions.     

Heteropolyacid (H3PW12O40) supported MCM-41: An efficient solid acid catalyst for the green synthesis of xanthenedione derivatives

HPWA/MCM-41 mesoporous molecular sieves of appropriate ratios were prepared by loading HPWA on siliceous MCM-41 by the wet impregnation method. The prepared HPWA/MCM-41 materials were characterized by X-ray diffraction analysis (XRD) and BET surface area and FT-IR measurements. The morphology of mesoporous materials was studied by TEM observation. The catalytic activity of the above materials was tested for the condensation of dimedone (active methylene carbonyl compound) and various aromatic aldehyes under liquid phase conditions at 90 °C. The products were confirmed by FT-IR, ¹H NMR and ¹³C NMR studies. HPWA supported MCM-41 catalysts catalyses efficiently the condensation of dimedone and aromatic aldehydes in ethanol and other solvents under liquid phase conditions to afford the corresponding xanthenedione derivatives. Activities of the catalysts follow the order: HPWA/MCM-41(20 wt.%) > HPWA/MCM-41(30 wt.%) > H₃PW₁₂O₄₀·nH₂O > HPWA/MCM-41(10 wt.%) > HPWA/SiO₂ (20 wt.%) > HM (12) > Hβ (8) > Al-MCM-41 (50). Various advantages associated with these protocols include simple workup procedure, short reaction times, high product yields and easy recovery and reusability of the catalyst.     

杂原子介孔Ce-MCM-41分子筛的制备及其吸附脱除甲硫醚性能

以十六烷基三甲基溴化铵为模板剂,正硅酸乙酯(TEOS)为硅源,硝酸铈为铈源,采用水热法合成了杂原子介孔分子筛Ce-MCM-41。XRD和FT-IR表征结果表明,当加入的Ce/Si物质的量比小于0.04时合成了规整有序的介孔结构,并将Ce原子引入到MCM-41骨架中。N₂吸附-脱附测试获得MCM-41和Ce-MCM-41(Ce/Si物质的量比为0.04)的平均孔径分别为2.82和2.46 nm,孔容分别为0.762 1和 0.689 4 m³/g,BET比表面积分别为986.42和756.8 m²/g。NH₃-TPD表征结果表明,Ce-MCM-41的酸性要明显强于MCM-41,但两种分子筛的酸性均较弱。利用合成的MCM-41和Ce-MCM-41吸附脱除甲硫醚浓度为58 μg(甲硫醚)/g的甲硫醚/氮气混合气中的甲硫醚。甲硫醚分子尺寸的模拟结果为0.464 8 nm,可以很容易地进入分子筛的介孔孔道中。由于Ce-MCM-41分子筛具有较多的酸量,其硫吸附容量7.52 mg(S)/g明显高于MCM-41的4.57 mg(S)/g。MCM-41和Ce-MCM-41都具有较好的再生性能,再生3次后硫吸附容量仍可恢复到初始容量的80%,分别为3.52和 5.86 mg(S)/g。     

Synthesis and catalytic performance of ZSM-5/MCM-41 composite molecular sieve from palygorskite

ZSM-5/MCM-41 composite molecular sieve has been hydrothermally synthesized through a two-step crystallization process using palygorskite (PAL) as silicon and aluminum source. The products were characterized by various means and their catalytic properties for acetalization of cyclohexanone and esterification of acetic acid and n-butanol were also investigated. In the first step ZSM-5 zeolite could be formed from the acid-treated PAL after hydrothermal treatment using tetrapropylammonium bromide as template. XRD patterns, N₂ adsorption and desorption data, and TEM images show that the composite obtained in the secondary step had a well-ordered mesoporous MCM-41 phase and a microporous ZSM-5 zeolite phase. Compared with ZSM-5, ZSM-5/MCM-41 composite possessed more total acid amount, weak acid sites and large pore structure due to the formation of MCM-41 and exhibited higher catalytic activity for the acetalization and esterification reaction.     

140Cu/MCM-41和14T2Cu/MCM-41的制备与表征

二氧四胺大环和取代二氧四胺大环化合物兼有大环氮杂冠醚和低聚肽的性质,能和很多过渡金属离子(Cu²⁺,Ni²⁺,Mn²⁺,Co²⁺等)形成具有特殊功能的配合物.如十四元二氧四胺大环Co(Ⅱ)配合物在-70℃加入过量的咪唑或吡唑后.     

Synthesis, structure and magnetic properties of porous magnetic composite, based on MCM-41 molecular sieve with Fe3O4 nanoparticles

Porous magnetic composites were prepared by the synthesis of molecular sieve MCM-41 in the presence of Fe₃O₄ nanoparticles with average diameter of 15 nm. Nanoparticles were captured by porous silica matrix MCM-41, which resulted in their incorporation, as it was confirmed by TEM, SEM and X-ray diffraction. The materials possessed high surface area (392-666 m² g⁻¹), high pore volume (0.39-0.73 cm³ g⁻¹) along with high magnetic response (M_S up to 28.4 emu g⁻¹ at 300 K). Calcination of samples resulted in partial oxidation of Fe₃O₄ to α-Fe₂O₃. The influence of nanoparticles content on sorption and magnetic properties of the composites was shown. No hysteresis was found for the samples at 300 K; at 5 K, H_C was in the range 370-385 G for non-calcinated samples and 350-356 G for calcinated ones.     

MCM-41分子筛的合成及129Xe核磁共振的研究

Purely siliceous MCM-41 with a narrow pore-size distribution, different pore size, high surface area was synthesized . As prepared, calcined and catalytically tested MCM-41 materials have been comprehensively characterized by N₂ adsorption/desorption at 77K and ¹²⁹Xe NMR. By adding mesitylene during the synthesis, the pore size of MCM-41 was enlarged to 5.2nm. The chemical shift in ¹²⁹Xe NMR spectroscopy of adsorbed xenon indicates that the MCM-41 is one dimensional pore channels .