Crystal structures and luminescent properties of lanthanide nitrate coordination polymers with structurally related amide type bridging podands

A one-dimensional linear chain coordination polymer [ErL^I(NO₃)₃(CH₃CO₂Et)]_n (L^I=1,2-bis{[(2'-furfurylaminoformyl)phenoxyl]methyl}benzene) and a one-dimensional zig-zag coordination polymer {[TbL^II(NO₃)₃(H₂O)]·(H₂O)}_n (L^II=1,2-bis{[2'-(2-pyridylmethylaminoformyl)phenoxyl]methyl}benzene) were assembled by two structurally related bridging podands L^I and L^II which have uniform skeleton and different terminal groups. In {[TbL^II(NO₃)₃(H₂O)]·(H₂O)}_n, the neutral chains were linked by the hydrogen bonding interactions between the free and coordinated water molecules from two different directions to interpenetrate into a 3D supramolecular structure. At the same time, the luminescent properties of the solid Tb(III) nitrate complexes of these podands were investigated at room temperature. The lowest triplet state energy levels T₁ of the podands L^I and L^II indicate that the triplet state energy levels of the antennae are both above the lowest excited resonance level of ⁵D₄ of Tb³⁺ ion. Thus the absorbed energy could be transferred from ligands to the central Tb³⁺ ions. And the influence of the hydrogen bonding on the luminescence efficiencies of the coordination polymers was also discussed.     

Temperature dependence of the reaction NO + NO3 → 2NO2

The flash photolysis-visible absorption technique has been used to measure rate constants for the reaction NO + NO₃ → 2NO₂ (1) over the temperature range 224–328 K. The temperature dependence of the rate constant is given by the expression k₁(T) = (1.59 ± 0.32) × 10⁻¹¹exp(122/T) cm³ molecule⁻¹ s⁻¹ where the stated uncertainties refer to the ± 2σ limits from both random and systematic errors.     

Advanced oxidation of aromatic VOCs using a pilot system with electron beam–catalyst coupling

The decomposition of volatile organic compounds (VOCs) using a pilot system of electron beam (EB)–catalyst coupling was investigated. Two aromatic VOCs, toluene (1800 ppmC) and o-xylene (1500 ppmC), were irradiated with a dose range of 0–10 kGy at room temperature. The removal efficiencies for toluene and o-xylene were 92.4% and 94.5%, respectively, under a 10 kGy absorbed dose condition, which were higher than the results of 45.7% and 52.3% when EB-only was used, respectively. The CO₂ selectivity approached 100% for both toluene and o-xylene using the EB-catalyst coupling system, while the concentrations of O₃ formed were 0.02 ppm (toluene) and 0.003 ppm (o-xylene) at 10 kGy. The aerosol concentration was also measured as 43.2 μg/m³ (toluene) and 53.4 μg/m³ (o-xylene) at 10 kGy absorbed dose.     

Extended chains via hydrogen bond linkages of dinuclear copper(II) and cadmium(II) complexes with a new flexible disulfoxide ligand

A new flexible disulfoxide ligand 1,6-bis(benzylsulfinyl)hexane (L), which is a mixture of the meso and rac isomers, was treated with Cu^II or Cd^II nitrate and obtained dimeric complex [Cu₂(L)₃(H₂O)₂(NO₃)₄] 2 or [Cd₂(L)₃(H₂O)₂(NO₃)₄] 3. In the reacting system the crystals of meso isomer 1 of L together with 2 or 3 were obtained. 2 and 3 have similar molecular structures. In the neutral dimer, three ligands present two kinds of coordination models: monodentate and bis-monodentate. The neutral dimeric units in 2 and 3 are linked by hydrogen bonds to yield a chain structure. Crystal structures of all three compounds were determined by single-crystal X-ray diffraction methods. Crystal data for 1: monoclinic, space group Cc, a=41.95(2), b=5.132(2), c=8.660(4) Å, β=94.898(9)°, V=1857.7(15) Å³, Z=4, final refinement (I>2σ(I)): R1=0.0659, wR2=0.1415. Crystal data for 2: triclinic, space group P-1, a=9.242(4), b=9.539(4), c=21.042(9) Å, α=83.888(9), β=87.971(8), γ=74.177(9)°, V=1774.6(13) Å³, Z=2, final refinement (I>2σ(I)): R1=0.0577, wR2=0.0954. Crystal data for 3: triclinic, space group P-1, a=9.203(4), b=9.831(3), c=20.860(7) Å, α=84.313(6), β=86.432(7), γ=74.188(6)°, V=1805.9(11) Å³, Z=2, final refinement (I>2σ(I)): R1=0.0548, wR2=0.1192.     

Nature of the Chemical Bond and the Mutual Influence of Ligands in Co(III) Dioximinates

The results of MWG calculations of the electronic structures of real Co(III) complexes [Co(HD)₂L¹L²] ⁿ were used to analyze the electron density distribution and to determine the charges on atoms and configurations, where nis the charge of the complex and HD is the acid residue of dimethylglyoxime (H₂D); L¹= NH₃at L²= NH₃, Cl^–, Br^–, or I^–and L¹= L²= Cl^–; and L¹= H₂O or NO^– ₂at L²= NO^– ₂, with self-consistency over all atoms of the system and over d, s, and pconfigurations of cobalt. The mutual influence of the ligands (trans- and cis-) was shown to be determined by the atomic charges and bond orders on the axial coordinate and in the equatorial plane of the complex. The following order of the trans-effect was proposed: I^–> Br^–> Cl^–> NO^– ₂> NH₃> H₂O. The effects of the electronic factors on distorsion and conformational processes in the complexes were discussed.     

Poly(2-amino-5-(4-pyridinyl)-1, 3, 4-thiadiazole) film modified electrode for the simultaneous determinations of dopamine, uric acid and nitrite

Poly(2-amino-5-(4-pyridinyl)-1,3,4-thiadiazole) (PAPT) modified glassy carbon electrode (GCE) was fabricated and used for the simultaneous determinations of dopamine (DA), uric acid (UA) and nitrite (NO₂ ^?) in 0.1 mol?L^?1 phosphate buffer solution (PBS, pH 5.0) by using cyclic voltammetry and differential pulse voltammetry (DPV) techniques. The results showed that the PAPT modified GCE (PAPT/GCE) not only exhibited electrocatalytic activities towards the oxidation of DA, UA and NO₂ ^? but also could resolve the overlapped voltammetric signals of DA, UA and NO₂ ^? at bare GCE into three strong and well-defined oxidation peaks with enhanced current responses. The peak potential separations are 130 mV for DA–UA and 380 mV for UA–NO₂ ^? using DPV, which are large enough for the simultaneous determinations of DA, UA and NO₂ ^?. Under the optimal conditions, the anodic peak currents were correspondent linearly to the concentrations of DA, UA and NO₂ ^? in the ranges of 0.95–380 μmol?L^?1, 2.0–1,000 μmol?L^?1 and 2.0–1,200 μmol?L^?1 for DA, UA and NO₂ ^?, respectively. The correlation coefficients were 0.9989, 0.9970 and 0.9968, and the detection limits were 0.2, 0.35 and 0.6 μmol?L^?1 for DA, UA and NO₂ ^?, respectively. In 0.1 mol?L^?1 PBS pH 5.0, the PAPT film exhibited good electrochemical activity, showing a surface-controlled electrode process with the apparent heterogeneous electron transfer rate constant (k _s) of 25.9 s^?1 and the charge–transfer coefficient (α) of 0.49, and thus displayed the features of an electrocatalyst. Due to its high sensitivity, good selectivity and stability, the modified electrode had been successfully applied to the determination of analytes in serum and urine samples.     

Formation and Dissociation of Tetrahedral Nickel(II) and Cobalt(II) Complexes of ‘Dithioimidodiphosphato’ Ligands,Measurement of Kinetically Determined Stability Constants,and Kinetic Investigations of the Rapid Formation of Tetrahedral Bis(ligand)copper(II) Complexes and Their Rates of Reduction to Trinuclear Copper(I) Species

The stopped‐flow technique was used to measure the rates of formation and dissociation of tetrahedral [ML₂] complexes (M²⁺=Ni²⁺ or Co²⁺) of four bidentate S₂‐donor ‘dithioimidodiphosphato’ ligands L^? (HL=[R¹R²P(?S)]NH[P(?S)R³R⁴], R¹ to R⁴=alkyl) at 25.0° in MeOH/H₂O 95 : 5 (v/v) solution and in the presence of either MOPS (=3‐(morpholin‐4‐yl)propane‐1‐sulfonic acid) or 2,6‐lutidine (=2,6‐dimethylpyridine) buffers. The kinetically determined equilibrium formation constants for [ML]⁺ ions (M=Ni or Co) are 10^?5 K=0.50±0.01 or 1.64±0.07 l mol^?1 for L=L³ (R¹=R²=Me(CH₂)₂CH(Me), R³=R⁴=Me₂CH), 1.27±0.02 or 7.93±0.09 l mol^?1 for L=L⁷ (R¹ to R⁴=Me₂CHCH₂), 0.88±0.04 or 3.84±0.13 l mol^?1 for L=L⁸ (R¹ to R⁴=Me₂CH), and in case of Ni²⁺ 1.88±0.04 l mol^?1 for L=L⁶ (R¹=R³=Bu, R²=R⁴=^tBu) (see Table 3; for L³ and L⁶–L⁸, see Table 1). Whereas the tetrahedral Ni²⁺ complexes dissociate more slowly than the analogous Co²⁺ species, in all cases, the Co²⁺ complexes are more stable than those of Ni²⁺ due to their larger formation rate constants (Table 3). Reactions of Cu²⁺ with eight ligands HL (R¹ to R⁴=alkyl, alkoxy, aryl, and aryloxy) show that formation of intensely colored tetrahedral [Cu^IIL₂] species is too fast be measured with the available stopped‐flow apparatus (t_1/2<2 ms), but the subsequent rates of reduction of [Cu^IIL₂] to give trinuclear products [Cu^I₃L₃] are measurable. An X‐ray analysis establishes the structure of one of the [Cu₃L₃] complexes, where R¹=R²=Me₂CHO and R³=R⁴=2‐(tert‐butyl)phenyl (L=L⁵), and a multiwavelength stopped‐flow kinetic experiment establishes the spectrum of a tetrahedral [Cu^IIL₂] species prior to the reduction reactions. The redox reactions proceed at 25.0° with first‐order rate constants in the range 0.285 s^?1 (R¹ to R⁴=PhO; L=L¹¹) to 2.58?10^?4 s^?1 (R¹ to R⁴=Me₂CHCH₂; L=L⁷) (Table 4).     

Rate constants of the reactions of O(3P) atoms with Br2 and NO2 over the temperature range 220-950 K

The kinetics of the reactions of Br₂ and NO₂ with ground state oxygen atoms have been studied over a wide temperature range, T = 220-950 K, using a low-pressure flow tube reactor coupled with a quadrupole mass spectrometer: O + NO₂ → NO + O₂ (1) and O + Br₂ → Br + BrO (2). The rate constant of reaction (1) was determined under pseudo–first-order conditions, either monitoring the kinetics of O-atom or NO₂ consumption in excess of NO₂ or of the oxygen atoms, respectively: k₁ = (6.1 ± 0.4) × 10⁻¹² exp((155 ± 18)/T) cm³ molecule⁻¹ s⁻¹ (where the uncertainties represent precision at the 2σ level, the estimated total uncertainty on k₁ being 15% at all temperatures). The temperature dependence of k₁, found to be in excellent agreement with multiple previous low-temperature data, was extended to 950 K. The rate constant of reaction (2) determined under pseudo–first-order conditions, monitoring the kinetics of Br₂ consumption in excess of O-atoms, showed upward curvature at low and high temperatures of the study and was fitted with the following three-parameter expression: k₂ = 9.85 × 10⁻¹⁶ T^1.41 exp(543/T) cm³ molecule⁻¹ s⁻¹ at T = (220-950) K, which is recommended from the present study with an independent of temperature conservative uncertainty of 15% on k₂.     

High-capacity NO2 denuder systems operated at various temperatures (298–473?K)

In this study, we investigated several coatings for high-temperature, high-capacity, and high-efficiency denuder-based NO₂ removal, with the scope to face the harsh conditions and requirements of automotive exhaust gas sampling. As first coating, we propose a potassium iodide (KI)/polyethylene glycol coating with a high removal efficiency (ε?>?98?%) for about 2?h and 50?ppm NO₂ at room temperature (298?K). At elevated temperatures (423?K), the initial capacity (100?ppmh) is decreased to 15?ppmh. Furthermore, this is the first proposal of the ionic liquid methyl-butyl-imidazolium iodide ([BMIm⁺][I^?]) as denuder coating material. At room temperature, this ionic liquid exhibits far greater capacity (300?ppmh) and NO₂ removal efficiency (ε?>?99.9?%) than KI. Nevertheless, KI exhibits a slightly (~10?%) higher capacity at elevated temperatures than [BMIm⁺][I^?]. Both coatings presented are suitable for applications requiring selective denuding of NO₂ at temperatures up to 423?K.     

Potential energy surface and rate constant of the inversion substitution reactions CH3X + O2 → CH3O2• + X• (X = SH,NO2)

The temperature dependence of the rate constant of the inversion substitution reactions CH₃X + O₂ → CH₃O₂^? + X^? (X = SH, NO₂), can be expressed as k = 6.8 × 10^–12(T/1000)^1.49exp(–62816 cal mol^–1/RT) cm³ s^–1 (X = SH) and k = 6.8 × 10^–12(T/1000)^1.26 × × exp(–61319 cal mol^–1/RT) cm³ s^–1 (X = NO₂), as found with the use of high-level quantum chemical methods and the transition state theory.     

Oxidation of benzalkonium chloride by gamma irradiation: kinetics and decrease in toxicity

The gamma degradation of toxic non-oxidizing biocide dodecyl dimethyl benzyl ammonium chloride (DDBAC) was investigated. The degradation of DDBAC achieved 70–100% depending on the initial concentration and the absorbed dose, but only 10–33% dissolved organic carbon was removed. The presence of NO₃ ^?, HCO₃ ^?, 2-propanol and tert-butanol inhibited the degradation of DDBAC. The DDBAC degradation rate constant ratios of ·OH, ·H and e _aq ^? was calculated as 7.4:1.4:1. The acute toxicity of 10 mg L^?1 DDBAC was removed by 60% at absorbed doses of 0.5–3.0 kGy. The results showed that gamma irradiation was effective to remove DDBAC and its toxicity.     

Palladium(II) compounds with planar chirality. X-Ray crystal structures of (+)-(R)-[{(η5-C5H4)–CHN–CH(Me)–C10H7}Fe(η5-C5H5)] and (+)-(Rp,R)-[Pd{[(Et–CC–Et)2(η5-C5H3)–CHN–CH(Me)–C10H7]Fe(η5-C5H5)}Cl]

A wide variety of planar chiral cyclopalladated compounds of general formulae [Pd{[(η⁵-C₅H₃)–CHN–CH(Me)–C₁₀H₇]Fe(η⁵-C₅H₅)}Cl(L)] (with L=py-d₅ or PPh₃), [Pd{[(η⁵-C₅H₃)–CHN–CH(Me)–C₁₀H₇]Fe(η⁵-C₅H₅)}(acac)] or [Pd{[(R¹–CC–R²)₂(η⁵-C₅H₃)–CHN–CH(Me)–C₁₀H₇]Fe(η⁵-C₅H₅)}Cl] (with R¹=R²=Et; R¹=Me, R²=Ph; R¹=H, R²=Ph; R¹=R²=Ph; R¹=R²=CO₂Me or R¹=CO₂Et, R²=Ph) are reported. The diastereomers {(R_p,R) and (S_p,R)} of these compounds have been isolated by either column chromatography or fractional crystallization. The free ligand (R)-(+)-[{(η⁵-C₅H₄)–CHN–CH(Me)–C₁₀H₇}Fe(η⁵–C₅H₅)] (1) and compound (+)-(R_p,R)-[Pd{[(Et–CC–Et)₂(η⁵-C₅H₃)–CHN–CH(Me)–C₁₀H₇]Fe(η⁵-C₅H₅)}Cl] (7a) have also been characterized by X-ray diffraction. Electrochemical studies based on cyclic voltammetries of all the compounds are also reported.     

Kinetics of diamminesilver(I)-catalysed oxidation of sulphur(IV) by dioxygen in ammonia buffers

The kinetics of the silver(I)-catalysed autoxidation of SO₃ ^2– into SO₄ ^2– in ammonia–ammonium nitrate buffer obeyed the rate law:R _obs=k₁ k₂ K[Ag^I]_T[SO₃ ^2-}][O₂] / ([NH₃]+K[SO₃ ^2-])(k₁+k₂[O₂])The values of k ₁, k ₂/k _–1 and K were found to be 1.2l mol^–1 s^–1, 5.3 × 10² l mol^–1 and 0.6 respectively at 30 °C. Two alternative free radical mechanisms have been proposed.     

Polycyclic aromatic hydrocarbons in coal combustion flue gas under electron beam irradiation

The electron beam (EB) technology has been investigated as a one-stage multi-component purification technology. The initial concentrations of SO₂, NO_x, and 16 polycyclic aromatic hydrocarbons (PAH) in flue gas have been reduced simultaneously by over 60%, 50%, and 20%, respectively, in flue gas at the dose of 8 kGy. Determined PAH distribution in the by-product has shown negligible role of adsorption in PAH removal. PAH-based overall toxicity of flue gas decreased remarkably in the range of 30–80% under EB irradiation.     

Oxidation of SO2 to sulfate in sea salt aerosols

Summary In laboratory-scale experiments sea salt particles are exposed to SO₂ at a temperature of 22°C and relative humidities of 40, 60 and 80%; the SO₂ gas concentration is fixed to 0.2, 0.5 and 1.0 ppm (v), respectively. In further test series NO₂ is added to the gas phase. As kinetic data the capacity values of the sea salt particles (mg formed sulfate/g dry aerosol) are determined as function of time and from this the reaction rates (mg formed sulfate/g dry aerosol and minute) are calculated in dependence of the yield. The relative humidity (r.h.) has proved to be a decisive reaction parameter. For example, the rate (at a reaction time of one hour) increases at a SO₂ concentration of 0.5 ppm (v) from 0.01 to approx. 0.1 mg SO ₄ ^2– /g·min, if the r.h. will increase from 40 to 80%. However, the gas concentration has only an importance at high humidities (where the reaction takes place in droplets) for the sulfate formation in sea salt aerosols. If the SO₂ concentration is reduced from 1.0 to 0.2 ppm (v) at a r.h. of 80%, the rate will be decreased from 0.2 to about 0.07 mg SO ₄ ^2– /g·min; however, at a r.h. of 60% from 0.075 to 0.04 mg SO ₄ ^2– /g·min. As an increased sulfate formation but no nitrate formation can be detected when NO₂ is added to the gas phase, it can be assumed that SO₂ is oxidized in the electrolyte layer around the sea salt particles whereas NO₂ is reduced. If NO₂ (SO₂:NO₂=1:1) is added to the gas phase, the rate — for example at a r.h. of 40% — will be increased from 0.01 to 0.24 mg SO ₄ ^2– /g·min.     

The novel Cs4Nb6F8.5I3.5I6 octahedral niobium cluster fluoro-iodide: a step towards the Nb6F12 cluster core excision

The solid state synthesis of Cs₄Nb₆Fⁱ_8.5Iⁱ_3.5I^a₆ starting from Nb₆F₁₅ binary fluoride, as well as its crystal structure determined by X-ray single crystal diffraction, are presented in this work. This novel cluster compound is based on a Nb₆Iⁱ₃Fⁱ₆Lⁱ₃I^a₆ (L=F, I) discrete unit and crystallizes in the monoclinic system (space group C2/m; Z=4 ; a=10.4363(4) Å, b=18.1227(7) Å, c=19.5102(9) Å β=101.223(1)°, V=3619.5(3) Å³, R₁=0.057; wR₂=0.159). This halide is the first octahedral niobium cluster compound containing unshared terminal I^a ligands together with ordered μ₂-Iⁱ and μ₂-Fⁱ ligands on nine inner positions whilst the three last ones (Lⁱ) are slightly affected by a I/F random occupancy. The structural findings are discussed and compared with those of Nb₆F₁₅, Nb₆I₁₁, CsNb₆I₁₁ and the fluorochlorides and fluorobromides recently reported.     

Kinetics of oxidation and comproportionation reactions involving an oxammonium ion,benzyl alcohol and methyltrioxorhenium(VII)

The reactions of 4‐hydroxy‐2,2,6,6‐tetramethylpiperidinium N‐oxide, an oxammonium ion abbreviated R₂NO⁺, have been studied. The previously unreported triflate salt was used in this study because the anions of the usual chloride and bromide salts can themselves be oxidized. Reactions between R₂NO⁺ and alcohols produce ketones and aldehydes; the rate constant for PhCH₂OH is 4.4 × 10⁻³ L mol⁻¹ s⁻¹ in acetonitrile at 298 K. The immediate product is the hydroxylamine, R₂NOH, but its further comproportionation reaction with R₂NO⁺ yields the stable piperidinyl oxyl radical, R₂NO^·. The rate constant of this reaction is 1.78 × 10³ L mol⁻¹ s⁻¹ at 298 K. The possibility of using R₂NO⁺ and MTO as co‐catalysts for the oxidation of alcohols was explored, but the competitive rates are such that the resultant is not particularly attractive. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 381–385, 1999     

Gamma ray induced decomposition of double nitrates of lanthanum and cerium with some mono and bivalent cations in solid state

Gamma ray induced decomposition of two series of double nitrates; 2M^INO₃⋯Ln(NO₃)₃⋯x H₂O (where M^I = NH⁺₄, Na⁺, K⁺, Rb⁺, Cs⁺; Ln^III = La³⁺, Ce³⁺ and x = 2 or 4) and 3M^II(NO₃)₂·2Ln^III(NO₃)₃⋯24H₂O (where M^II = Mg²⁺, Co²⁺, Zn²⁺; Ln^III = La³⁺, Ce³⁺) has been studied in solid state over a wide absorbed dose range at room temperature. G(NO⁻₂) values have been found to depend on the absorbed dose and the nature of cation in both the series of double salts. Radiation sensitivity of lanthanum double nitrates with monovalent cations at an absorbed dose of 158 kGy follows the order NH⁺₄ < Rb⁺ ≅ Cs⁺ < Na⁺ < K⁺ and those of cerium NH⁺₄ < Rb⁺ <Na⁺ <K⁺. G(NO⁻₂) values of lanthanum double nitrates with bivalent cations at an absorbed dose of 206 kGy range from 0.22 to 1.05 and follow the order Zn²⁺ < Co²⁺ < Mg²⁺ while for cerium salts are in the range 0.62–0.91 in the order Zn²⁺ ≅ Co²⁺ < Mg²⁺. In fact double nitrates of cerium with Zn²⁺ and Co²⁺ exhibit almost similar G(NO⁻₂) values over the dose range 5–640 kGy. X-ray powder diffraction patterns of the irradiated Mg-La double salt indicate the possibility of structural phase transformation at certain doses.     

Study of triglycine complexation with Cu<Subscript>2+</Subscript> ions in aqueous solution

Composition and stability of triglycine complexes with Cu(II) ions in a wide range of concentration ratios at T = 298.15 K and I = 0.2 (KNO₃) have been determined by potentiometric method. Existence of CuHL²⁺, CuHL₂₊, CuH₂L^{2+ 2}, CuL⁺, CuH_–1L, CuH_–2L–, CuH_–3L^2–, CuL₂, CuH_-1L^- ₂, and CuH_–2L^2- ₂, species has been established.     

Complexation equilibria and spectrophotometric determination of zinc (II) with 2-(4′-methyl-2′-thiazolylazo)-4,6-dimethylphenol

2-(4′-methyl-2′-thiazolylazo)-4,6-dimethylphenol has been synthesized and its acid—base behaviour (pK_a1=0.03 ± 0.01, pK_a2=9.70±0.09) and complexation equilibria with zinc (logβ₁₀₁=6.70±0.04, logβ₁₀₂ = 13.70±0.02) studied in a 40% (v / v) ethanol—water medium at I=0.25 M NaClO₄. A spectrophotometric method for the determination of 0.2–1.5 ppm of zinc has been developed (ε=1.83 × 10⁴ 1. mol⁻¹ cm⁻¹ at 590 nm) and applied to its determination in lubricating oils.