多波长线性回归—导数分光光度法测定对苯二酚,邻苯二酚和苯酚

本文将导数分光光度法与多波长线性回归法联用，测定了电有机合成产品中的对苯二酚，邻苯二酚和苯酚的含量，回收率在９５．０％～１００．１％之间，模拟合成样品分析结果的相对误差对０．１％～６．６％。方法简便。     

一阶导数紫外吸光光度法同时测定苯酚和对苯二酚

采用一阶导数紫外吸光光度法在 pH≤ 7时直接同时测定苯酚和对苯二酚。苯酚和对苯二酚的摩尔吸光系数分别为 5 .0× 10 4 和 4 .2× 10 4 L·mol- 1·cm- 1,较基本光谱分别提高 34倍和19倍。检出限均为 0 .0 4 μg·ml- 1。对模拟合成样品进行分析 ,苯酚和对苯二酚的相对标准偏差分别≤ 1.18%和≤ 1.74 ,结果良好     

荧光光度法直接测定环境水中的苯酚和苯胺

了用荧光分光光度法通过控制酸度直接测定环境水中苯酚和苯胺两种水中污染物的新方法。在ｐＨ＝１时，直接测定苯酚的含量，波长为λｅｘ／λｅｍ＝２７０／２９７ｎｍ，检出限为４．０ｎｇ／ｍＬ，线性范围为０～３．２μｇ／ｍＬ。在ｐＨ＝１２时，直接测定苯胺的含量，波长为λｅｘ／λｅｍ＝２８０／３４０ｎｍ检出限为４．３ｎｇ／ｍＬ，线性范围为０～２．０ｕｇ／ｍＬ，回收率达９９～１０１％。     

荧光光度法直接测定环境水中苯酚和十二烷基苯磺酸钠的含量

本文研究了用荧光分光光度法直接测定环境水中苯酚和十二烷基苯磺酸钠（ＳＤＢＳ）二种水中污染物。在ｐＨ〉１１直接测定ＳＤＢＳ含量，波长为λｅｘ／λｅｍ＝２３０／２９５ｎｍ，检出限４．４ｎｇ／ｍＬ，线性范围０￣２．２μｇ／ｍｌ。在ｐＨ＝６，波长为λｅｘ／λｅｍ＝２３０／２９５ｎｍ，测得二者合量，从合量中减去ＳＤＢＳ含量即得苯酚含量，检出限４．０ｎｇ／ｍｌ，线性范围０￣０．８５μｇ／ｍＬ，回收率达９９％￣     

因子分析-导数光度法同时测定苯酚、间苯二酚、对苯二酚混合体系的比较

同时采集多事体系的紫外基谱和一阶导数光谱数据,用因子分析技术地两套数据进行分析对比,结果表明一阶导数光谱数据经因子分析法同时测定混合多酚所得结果明显优于基本光谱数据经因子分析法所得结果,具有明显的消除背景干扰,提高灵敏度等优点。     

吸光度比值导数法同时测定苯酚,邻苯二酚和对苯二酚

研究了应用吸光度比值导测定苯酚，邻苯二酚对苯二酚３组分混合物。合成试样４次平行测定的相对标准偏差小于６％。回收率在９５％－１０４％之间。     

阻抑动力学光度法测定环境水样中的痕量苯酚

基于在稀硫酸介质中，痕量苯酚能灵敏地阻抑高碘酸氧化苯胺蓝褪色，研究了该阻抑褪色反应的最佳条件及动力学参数，建立了测定痕量苯酚的新方法。该方法的线性范围为0-40.0μg/L，线性回归方程为1g(A1/A2)=0.638c 0.00117，相关系数r=0.9996，检出限为1.2μg/L。该方法简便，灵敏，选择性好，用于环境水样中痕量苯酚的测定，结果准确。     

浊点萃取-荧光光度法测定苯酚

基于非离子表面活性剂TritonX-100,以浊点萃取结合荧光光度法测定水中的苯酚,考察影响浊点萃取的各种因素。最佳实验条件为：pH=3.0的磷酸氢二钠-磷酸二氢钾缓冲溶液中,5%的TritonX-100用量2.0mL、平衡温度82℃、平衡时间8min。在此条件下,苯酚被萃取到TritonX-100表面活性剂相与水相分开。     

褶合曲线分析法用于同步荧光光谱法同时测定苯酚和对苯二酚

采用计算机辅助褶合曲线分析法结合同步荧光光谱法对双组分体系（苯酚／对苯二酚、苯酚／邻苯二酚）同时测定。苯酚和对苯二酚的荧光光谱重叠比较严重，同步荧光光谱虽使选择性有所改善，但仍有重叠，苯酚和对苯二酚的同步荧光峰相差仅２０ｎｍ。褶合曲线分析法可很好地用来测定苯酚和对苯二酚，方法简便、准确、易于自动化，同时证明，褶合曲线分析法在荧光分析方面具有很好的应用前景。进一步试验苯酚和邻苯二酚双组分的同时测定，苯酚和邻苯二酚的同步荧光峰相差仅１０ｎｍ，结果表明，该法虽然能在苯酚存在的情况下测定邻苯二酚，但不能同时测定苯酚。     

多波长线性回归－导数分光光度法测定对苯二酚、邻苯二酚和苯酚

本文将导数分光光度法与多波长线性回归法联用，测定了电有机合成产品中的对苯二酚、邻苯二酚和苯酚的含量。回收率在９５．０％～１００．１％之间。模拟合成样品分析结果的相对误差为０．１％～６．６％。方法简便。     

高效液相色谱-荧光检测法测定环境水中的苯胺和苯酚

建立了用高效液相色谱荧光检测法同时测定环境水中苯胺和苯酚的分析方法。色谱柱为EclipseXDB C8(4.6mmi.d.×150mm,5μm),流动相为甲醇 磷酸盐缓冲液(0.1mol/L磷酸二氢钾 0 1mol/L磷酸氢二钠,pH6.87)V(甲醇)∶V(磷酸盐缓冲液)=50∶50,流速1 0mL/min,柱温25℃,检测波长0minλex/λem=230/340nm(测定苯胺),3.5minλex/λem=215/300nm(测定苯酚)。测定苯胺的线性范围0.2～120ng,r=0.9999,检出限0.01ng;测定苯酚的线性范围0.4～500ng,r=0.9998,检出限0.02ng,回收率98.1%～101.2%。该方法已用于对环境水中苯胺和苯酚的测定。     

毛细管电泳法同时测定化妆品中氢醌、苯酚和防腐剂

采用毛细管电泳法对化妆品中氢醌、苯酚、山梨酸和苯甲酸进行了分离研究,考察了缓冲溶液的种类和pH值对分离的影响.以15 mmol/L硼砂(pH 9.2)为电泳缓冲液,采用压力进样方式,在20 kV恒压下进行分离,并在波长240 nm处检测,各组分可达到基线分离.4种标样在0.5～ 100.0 mg/L范围内呈良好线性关系...     

Determination of phenol, resorcinol and hydroquinone in air samples by synchronous fluorescence using partial least-squares (PLS)

The determination of phenolic compounds is of great importance owing to their high toxicity. Some of them are present in tobacco smoke and it is important for their monitoring in air of closed room. A simple, rapid and sensitive method was developed for simultaneous determination of hydroquinone, resorcinol and phenol in this kind of samples. Synchronous fluorescence technique was used and the data were processed by using the partial least-squares (PLS) chemometric algorithm. The concentrations for experimental calibration matrix were varied between 0.02 and 0.2 mg L⁻¹ for hydroquinone, between 0.05 and 0.6 mg L⁻¹ for resorcinol and between 0.05 and 0.4 mg L⁻¹ for phenol in accordance with the national legislation. The cross-validation method was used to select the number of factors. To check the accuracy of the proposed method a recovery study on real samples was carried out.     

Determination of trace elements in the water cycle by total-reflection x-ray fluorescence spectrometry

The determination of trace elements in the various stages of the water cycle is very important. Economic procedures for multi-element determinations of trace elements in various matrices are needed. The applications of total-reflection x-ray fluorescence spectrometry in this general area are reviewed briefly, with examples relating to rain, river and sea waters, sediments, particulate matter and manganese nodules and crusts, as well as mussel tissue. Up to 25 elements can be determined; these are S, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Pb, Se, Rb, Sr, Y, Zr, Mo, Ag, Cd, Sb and Ba. Preliminary treatments of the various matrices are described. Accuracy checks by analysis of reference standards and by application of independent techniques are reported.     

Determination of trace metals in water using x-ray fluorescence spectrometry

A simple, rapid and accurate method for water analysis is proposed. The analytical procedure for the determination of Fe, Mn, Zn, Cu, Cd, As, Pb and Se in water in concentrations as low as a few ppM involves precipitation with a carrier of the metals by diethyldithiocarbamate (DDTC) or 1-(2-pyridylazo)-2-naphthol (PAN) and filitration through a Millipore filter. The precipitates collected on the filter disc are examined by X-ray fluorescence analysis. PAN is excellent for the determination of several metal ions at the ppM level, and DDTC can be used with tartrate as a masking agent if water samples contain large amounts of iron(III).     

阻抑荧光猝灭法测定环境水样中痕量砷

在H2SO4介质中,KIO4氧化吖啶黄,使体系褪色并伴随荧光猝灭,痕量的As(Ⅲ)能显著阻抑此反应,据此建立了一种新的荧光法测定痕量As(Ⅲ)。本文对该体系的实验条件进行了详细研究。在最佳条件下,方法的线性范围为5.0～400μg/L,检出限为2.4μg/L。方法已用于环境水样中痕量As(Ⅲ)的测定,加标回收率为94.2%～102.6%。     

Determination of anatoxin-a in environmental water samples by solid-phase microextraction and gas chromatography-mass spectrometry

In the present work, a method was developed and optimized aiming at the determination of anatoxin-a in environmental water samples. The method is based on the direct derivatization of the analyte by adding hexylchloroformate in the alkalinized sample (pH = 9.0). The derivatized anatoxin-a was extracted by a solid-phase microextraction (SPME) procedure, submersing a PDMS fiber in an amber vial for 20 min under magnetic stirring. GC-MS was used to identify and quantify the analyte in the SIM mode. Norcocaine was used as internal standard. The following ions were chosen for SIM analyses (quantification ions in italics): anatoxin-a: 191, 164, 293 and norcocaine: 195, 136, 168. The calibration curve showed linearity in the range of 2.5-200 ng/mL and the LOD was 2 ng/mL. This method of SPME and GC-MS analysis can be readily utilized to monitor anatoxin-a for water quality control.     

Interrupted amperometry on solid electrodes: Determination of hydroquinone and phenol

The new method, interrupted amperometry, is proposed to increase the sensitivity of amperometric measurements. Analytical possibilities of interrupted amperometry on solid electrodes are studied on an example of the determination of phenolic compounds in aqueous solutions.     

离子色谱-质谱联用技术测定饮用水及环境水样中的痕量高氯酸盐

建立了一种测定痕量高氯酸盐的离子色谱-质谱联用方法.选用高容量、强亲水性的阴离子交换柱IonPac AS20(2 mm)进行分离,以淋洗液自动发生器在线产生的KOH为淋洗液,采用等浓度淋洗.在不添加有机溶剂的情况下,淋洗液经过抑制器抑制后直接进入电喷雾-串联质谱(ESI-MS-MS),以负离子模式进行检测.同时采用多元反应监测(MRM)模式对高氯酸盐进行监控,以100.8/84.9、 98.8/66.9和100.8/68.9为监控离子对,以98.8/82.9离子对的峰面积进行定量.高氯酸盐质量浓度在0.05～50 μg/L范围内具有良好的线性(r＝0.9985),检出限(S/N=3)为0.01 μg/L.将该方法用于饮用水以及地下水、雪水等环境水样中高氯酸盐的分析,并进行了加标回收实验,回收率在86%～110%之间,将实际自来水样品连续11次进样,所得高氯酸盐的峰面积的相对标准偏差(RSD)为1.6%.     

Determination of triazine pesticides and related compounds in environmental water by liquid chromatography-mass spectrometry.

A method for the determination of 5 triazine herbicides and 12 degradation products in environmental water samples using liquid chromatography-electrospray ionization mass spectrometry (LC/ESI/MS) has been developed. The pesticides in water were extracted with two types of solid phase: a styrene-divinylbenzene copolymer and a graphitized carbon black. Desorption solvents for the extracted compounds were acetone for the styrene-divinylbenzene copolymer and methanol for the graphitized carbon black. Overall recoveries from ground water and river water ranged from 73% to 111%. The limits of detection (LODs) were 0.2 to 28 ng l(-1). This method was applied to several ground water samples.