2,2-二甲基-5-取代苯基-3-(1,2,4-三唑-1/4-甲基)-3-戊醇类化合物的合成、表征及生物活性

取代苯甲醛经缩合、催化氢化、环氧化和开环反应合成了9种2,2-二甲基-5-取代苯基-3-(1,2,4-三唑-1-基甲基)-3-戊醇类化合物和2种2,2-二甲基-5-取代苯基-3-(1,2,4-三唑-4-基甲基)-3-戊醇类新化合物. 并对1,2,4-三唑-1-基衍生物和1,2,4-三唑-4-基衍生物的选择性合成进行了研究; 新化合物结构经质谱, ¹H NMR, 元素分析等确证, 并用单晶X射线衍射测定了化合物1a的晶体结构. 生物活性测试结果表明, 部分化合物具有强杀菌活性.     

3-芳基-1-(吡啶-3-基)-2-(1H-1,2,4-三唑-1-基)-2-丙烯-1-醇的合成及生物活性研究

用硼氢化钠还原3-芳基-1-(吡啶-3-基)-2-(1H-1,2,4-三唑-1-基)丙烯酮, 合成了10个新型含吡啶基的三唑醇类化合物. 所有化合物均经核磁、元素分析确证. 生物活性测试结果表明, 部分化合物具有一定的杀菌活性及植物生长调节活性.     

5-取代-4-氨基-1,2,4-三唑硫酮席夫碱合成、表征及生物活性

为了筛选出高活性的1,2,4-三唑席夫碱化合物,本文以二氨基硫脲与取代羧酸为原料,回流反应生成中间体5-取代-4-氨基-1,2,4-三唑硫酮,再与2-氯-6-氟苯甲醛在冰乙酸催化下合成了一系列三唑席夫碱类新化合物。目标化合物结构通过IR、元素分析、1H NMR、ESI-MS进行表征。采用室内平皿法初步测定了标题化合物对烟草赤星病、马铃薯干腐病、小麦赤霉病、西瓜枯萎病4种植物病原菌的生物活性,结果表明,合成的部分化合物具有较好的抑菌活性。     

4-氨基-5-[2-(4-氯苯氧甲基)苯并咪唑-1-亚甲基]-1,2,4-三唑-3-硫酮的核磁共振研究

在无水乙醇和KOH存在下,将2-(4-氯苯氧甲基-1-苯并咪唑乙酰肼(1)与CS2反应,合成出了中间体酰肼二硫代甲酸钾盐.此中间体再与过量的水合肼反应,经环化得到一种新化合物4-氨基-5-[2-(4-氯苯氧甲基)苯并咪唑-1-亚甲基]-1,2,4-三唑-硫酮.采用元素分析、IR及NMR技术确定了新化合物的结构,并利用2...     

氟喹诺酮C3稠杂环体系的合成及抗肿瘤活性(III): 恩诺沙星均三唑并噻二嗪酮衍生物

基于抗菌氟喹诺酮作用靶拓扑异构酶设计发展新型抗肿瘤氟喹诺酮药物已成为新的研究方向. 为扩展氟喹诺酮C-3稠杂环体系的研究领域, 以恩诺沙星1为起始原料经C-3羧基反应到C-3 1-氨基-5-巯基-均-三唑(5), 与氯乙酸缩环合到C-3均三唑[3,4-b][1,3,4]噻二嗪-6-酮(7), 接着与取代苯甲醛缩合得C-3 7-取代苯甲叉基-均三唑[2,1-b][1,3,4]噻二嗪-6-酮(8)目标化合物. 新化合物的结构经元素分析和光谱数据表征, 用MTT方法评价了它们体外对CHO, HL60和L1210 3种癌细胞株的体外生长抑制活性. 结果表明, 所合成的11个新化合物中均具有潜在的体外抑制癌细胞生长活性, 其中氨基均三唑硫乙酸中间体6及目标化合物8活性最强, 其IC50值已达到或接近微摩尔浓度, 预示氟喹诺酮类抗菌剂的C-3位稠杂环抗肿瘤构-效关系值得进一步研究.     

含1,2,4-三唑酰腙类化合物的合成、结构表征及生物活性

以取代羧酸为起始原料,经多步反应,设计合成12个中间体及16个2-(3-取代-4-氨基-1,2,4-三唑-5-硫基)乙酰腙类化合物,中间体2a~2d,3a~3d及目标产物4a~4p均为新化合物.借助IR,NMR,元素分析等方法对所合成的中间体和目标产物结构进行了表征;目标产物存在trans/cis异构体,室温下以trans异构体形式为主.生长素活性测试结果表明,目标化合物对小麦芽鞘有着不同程度的生长调节作用;同样,目标化合物对供试细菌也具有抑制作用,且对金黄色葡萄球菌的抑制作用明显优于对大肠杆菌的抑制作用,其中化合物4h的抑菌活性最好,对金黄色葡萄球菌的最低抑菌浓度(MIC)达到3.13μg/mL,与对比药物氯霉素接近.     

新型3-取代-6-(4-氯苯基)-7-(1H-1,2,4-三唑-1-基)-1',2',4'-三唑[3,4-b]-1",3",4"-噻二嗪衍生物的合成及抗菌活性

通过3-取代-4-氨基-5-巯基-1,2,4-三唑(3a～3m)和2-溴-2-(1H–1,2,4-三唑-1-基)-4′-氯代苯乙酮(2)的缩合反应,合成了13个新型3-取代-6-(4-氯苯基)-7-(1H-1,2,4-三唑-1-基)-1',2',4'-三唑[3,4-b]-1",3",4"-噻二嗪衍生物4a～4m.化合物结构经元素分析,1HNMR,IR和MS进行了表征.抗菌试验表明所合成的化合物对细菌表现出中等程度的抑制活性.     

N-(1H-3-羧基-1,2,4-三唑-5-基)-N''''-芳氧乙酰基脲的合成及生物活性

通过5-氨基-1,2,4-三唑-3-羧酸与芳氧乙酰基异氰酸酯反应,合成了9个新的N-(1H-3-羧基-1,2,4-三唑-5-基)-N'-芳氧乙酰基脲,用核磁共振氢谱、红外光谱和元素分析证明了目标化合物的结构.室内的生物活性测定试验证明,部分目标化合物具有良好的植物生长调节活性.     

1,2,4-三唑-3-硫醚衍生物的合成、晶体结构与神经氨酸酶抑制活性

设计并合成了一系列1,2,4-三唑-3-硫醚衍生物,目标化合物的化学结构经¹H NMR、¹³C NMR、质谱和元素分析确证;采用单晶X射线衍射法测定了(E)-4-(4-羟基-3-甲氧基苯基亚甲氨基)-5-乙基-4H-1,2,4-三唑-3-丙硫醚(1c)的晶体结构.目标化合物体外神经氨酸酶(Neuraminidase, NA, H1N1)抑制活性测试结果表明,大部分化合物1具有较好的NA抑制活性,其中(E)-4-(4-羟基-3-甲氧基苯基亚甲氨基)-5-乙基-4H-1,2,4-三唑-3-乙硫醚(1b)和1c的NA抑制活性最佳,其IC50值分别为(6.86±2.08)和(9.1±1.56)μg/m L.     

酰氨基硫脲及其相关杂环衍生物的研究——ⅩⅤ.3-[5-(3-吡啶)-四唑-2-亚甲基]-4-芳基-1,2,4-三唑-5-烃硫醚类化合物的合成及其抗菌活性

以3-〔5-(-3吡啶)-四唑-2-亚甲基〕-4-芳基-1,2,4-三唑-5-硫酮为原料合成了19个3-〔5-(3-吡啶)-四唑-2-亚甲基〕4-芳基-1,2,4-三唑-5-烃硫醚类合化物,经元素分析、红外、核磁以及质谱确定了其结构,观察了化合物对枯草芽抱杆菌、大肠杆菌、变形杆菌以及金黄色葡萄菌的抑制,其中以化合物3_(α-k)的抑制活性最强。     

Die Kristallstruktur des W3CoB3 und der dazu isotypen Phasen Mo3CoB3, Mo3NiB3 und W3NiB3

Zusammenfassung Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃ und W₃NiB₃ kristallisieren in einem eigenen Typ (W₃CoB₃-Struktur). Das trigonal prismatische Bauelement [T ₆B]^* ist zu Ketten vereinigt, wobei B₃-Gruppen entstehen. Die Phasen sind vermutlich Bor-reicher als obiger Formel entspricht.

---

The crystal structure of W₃CoB₃ and the isotypic phases Mo₃CoB₃, Mo₃NiB₃, and W₃NiB₃

Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃, and W₃NiB₃ were found to possess a new type of crystal structure (W₃CoB₃-structure type). Trigonal prismatic groups [T ₆B]^* are linked together forming chains in such a way that B₃-groups occur. These borides do probably exist with a larger amount of boron as to compared with the formula.

---

---

Mit 2 Abbildungen     

γ-Nitro-γ-butyrolacton

γ-Nitro-γ-butyrolactone By oxidation of 3-(1-nitro-2-oxocyclohexyl)propanal ( 1 ) with KMnO₄, besides 3-(1′-nitro-2′-oxocyclohexyl)pripionic acid ( 2 ), the complete hydrolysis product 4-oxononanedioic acid ( 4 ) and the oxidized semi-hydrolysis product 5-(2-nitro-5-oxotetrahydro-2-furyl)pentanoic acid ( 3 ) were formed. The crystalline 3 decomposes at r.t. forming 4 and nitrous gases; its structure was established by X-ray determination.     

Synthesis of γγγ-trifluorocarbonyl compounds

γγγ-Trifluorocarbonyl compounds are easily obtained in a good yield by introduction of the 1,1,1-trifluoroethyl moiety (CF₃-CH₂-) on the -methylene group of a ketone.     

K3SbSe3, Rb3SbSe3 und Cs3SbSe3 – Synthese und Kristallstruktur

K₃SbSe₃, Rb₃SbSe₃, and Cs₃SbSe₃ – Synthesis and Crystal Structure The compounds K₃SbSe₃, Rb₃SbSe₃ and Cs₃SbSe₃ were synthesized by heating mixtures of Sb₂O₃ and an alkalicarbonate in a stream of hydrogen saturated by selenium in a temperature range between 750 °C and 800 °C. The compounds crystallize isostructural with Na₃AsS₃. A comparison of atomic distances and bond angles with those of the isostructural arsenic and bismuth compounds shows the effect of lone pairs.     

Freezing the polarization of CH3NH3PbI3 and CH3NH3PbI3-xClx perovskite films

Thin films of methylammonium lead halides, CH₃NH₃PbI₃ and CH₃NH₃PbI_3-xCl_x, were deposited onto symmetrical microstructured electrode arrays of gold or platinum on Si/SiO₂ wafers. Polarization studies were carried out on perovskite films under vacuum in the dark. For poling, a constant voltage was applied to the samples while the temperature was cycled between 295 K and 4 K. The measured current densities depending on the temperature showed distinct characteristics relating strongly to the crystal phase and the dielectric properties of the perovskite films. Voltage sweeps were carried out at different scan rates at specific temperature intervals after poling. The polarization of the films due to the migration of iodide vacancies in direction of the blocking perovskite/metal interface was frozen almost up to room temperature. Charge carriers were only able to cross the blocking barrier and contribute to the current where the ions have accumulated during poling. All J-V curves showed hysteresis: inverted and regular hysteresis at room temperature and below, respectively. Inverted hysteresis originates from the slow accumulation of ions at the blocking barrier, while regular hysteresis arises from a distortion in the adjacent crystals which will be discussed.     

Vibrational spectra of CH3GeH3 and CD3GeH3

Infrared gas phase spectra of CH₃GeH₃ and CD₃GeH₃ have been investigated at a resolution of 0.06 cm⁻¹ and Raman spectra obtained in the liquid phase at low resolution. Several reassignments of the fundamental frequencies are proposed. Q-branch maxima from the five naturally occurring Ge isotopes have been resolved in several of the fundamental vibrations and new values obtained of rotational and Coriolis coupling constants for ν₇, ν₈, ν₁₀ and ν₁₂ of CH₃GeH₃ and ν₇, ν₈, ν₉, ν₁₀ and ν₁₂ of CD₃GeH₃. Germanium isotopic frequency shifts on ν_GeC are also reported.     

Synthesis of some derivatives of 3-amino-3-desoxyerythrose and 3-amino-3-desoxy-D-3-erythrose

The synthesis of derivatives of 3-amino-3-deoxy-L-erythrose by LAH or LAD reduction of the oxime of 1,2-O-isopropylidene α-L -glycero-tetros-3-ulofuranose is described.     

3x-pyrrolizin-3-ones

Condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groups, in the KOH-DMSO system, was used to prepare previously unknown 1-alkylthio-3H pyrrolizin-3-ones. The latter, treated with secondary amines, are readily converted to the corresponding 1-amino derivatives.     

3-H-pyrrolizin-3-ones

Previously unknown 1-alkylthio-3H-pyrrolizin-3-ones have been obtained by the condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groupings in the KOH-DMSO system. On treating the products with secondary amines they are readily converted into the corresponding 1-amino derivatives.Irkutsk Branch of the Russian Academy of Sciences, Irkutsk 664033. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 919–924, July, 1996. Original article submitted May 2, 1996.     

K3BiSe3, Rb3BiSe3 und Cs3BiSe3 – Substitutionsvarianten des Th3P4-Typs

K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ – Derivatives of the Th₃P₄ Structure Type The compounds K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ were synthesized by heating mixtures of Bi₂O₃ and the respective alkalicarbonate in a stream of hydrogen saturated by selenium at 850°C. Thin crystals of the compounds appear red in transmitted light. They crystallize isostructural with Na₃AsS₃, space group P2₁3, lattice constants a = 9.771(5) Å, a = 10.161(3) Å, and a = 10.587(5) Å for K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃, respectively. The Na₃AsS₃ structure type is a derivative of the Th₃P₄ structure type.