Analysis of the pressure effect on the local composition in a water-alkanol mixture using Kirkwood-Buff integrals

Kirkwood-Buff integrals are calculated from the thermodynamic data for binary mixtures of water with methanol, ethanol, 1-propanol, and 2-propanol at a temperature of 298.15 K in the pressure range from atmospheric to 100 MPa. The values of local compositions Δn _ij are calculated which characterize the excess (or deficit) of molecules i around the central molecule j. It is found that the pressure affects destructively the homoassociation in all mixtures studied. In a series MeOH < EtOH < 2-PrOH < 1-PrOH an excess of molecules around the similar type molecules increases in the local environment and the pressure effect on the local composition is enhanced.     

Surfactant effects on methanol oxidation at Pt–Ru/C coated glassy carbon electrode

The role of surfactants, cetyl trimethyl ammonium bromide (CTAB), sodium dodecyl sulphate (SDS) and Triton X-100 (in the catalyst), on methanol oxidation at commercial 50:50 Pt–Ru/C catalyst-coated glassy carbon has been studied using cyclic voltammetry, scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Surfactant containing catalysts showed a considerable reduction in the methanol oxidation potential. In terms of oxidation potential, better results (lower methanol oxidation potential) were observed in the order SDS > Triton X-100 > CTAB > no surfactant. SEM studies on the catalyst ink showed better homogeneity in the sample prepared using surfactant. This indicates better Pt Pt contact, which is likely to favour methanol adsorption and its oxidation. Hence, lowering of oxidation potentials for methanol oxidation could be seen with use of surfactants. Results of FT-IR on the catalyst ink showed definite changes in the frequencies in the case of Pt–Ru/C containing surfactants indicating definite interaction between catalyst and surfactant. Catalysts, with and without surfactants, yielded linear plots of concentration vs peak currents for methanol oxidation (0–2 M). With surfactant containing catalysts, reduction in methanol oxidation current was observed, and the order followed was the reverse of the above.     

Effects of water-alcohol binary solvents on the thermochemical characteristics of L-tryptophane dissolution at 298.15 K

The enthalpies of L-tryptophane solution in water-methanol, water-ethanol, water-1-propanol, and water-2-propanol mixtures at alcohol concentrations of x ₂ = 0–0.4 mole fractions were measured by calorimetry. The standard enthalpies of L-tryptophane solution (Δ_sol H ^°) and transfer (Δ_tr H ^°) from water to the binary solvent were calculated. The influence of the composition of the water-alcohol mixture and the structure and properties of L-tryptophane on the enthalpy characteristics of the latter was considered. The enthalpy coefficients of pair interactions (h _xy ) of L-tryptophane with alcohol molecules were calculated. The coefficients were positive and increased in the series: methanol (MeOH), ethanol (EtOH), 1-propanol (1-PrOH), and 2-propanol (2-PrOH). The solution and transfer enthalpies of L-tryptophane were compared with those of aliphatic amino acids (glycine, L-threonine, DL-alanine, L-valine, and L-phenylalanine) in similar binary solvents.     

Solvation Properties of Aliphatic Alcohol–Water and Fluorinated Alcohol–Water Solutions for Amide Molecules Studied by IR and NMR Techniques

Solvation properties of aliphatic alcohol–water and fluorinated alcohol–water solutions were probed by amide molecules as solutes using infrared (IR) and ¹H and ¹³C NMR techniques. These include four alcohols: ethanol (EtOH), 2-propanol (2-PrOH), 2,2,2-trifluoroethanol (TFE), and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and three amides: N-methylformamide (NMF), N-methylacetamide (NMA) and N-methylpropionamide (NMP). The hydrogen bonds of the amide carbonyl oxygen with water are gradually weakened as the alcohol content increases. This decreases in the order of HFIP > TFE ≈ 2-PrOH > EtOH. In TFE– and HFIP–water solutions, the hydrogen bond between the amide amino hydrogen and water is also gradually broken with increasing x _A. This trend is more notable in the order of NMP > NMA > NMF. The hydrophobic moieties of the amide methyl and ethyl groups are solvated by the fluoroalkyl groups of fluorinated alcohols due to the hydrophobic interaction among them. Thus, the steric hindrance generated by the solvated alkyl group of amides promotes the breaking of the hydrogen bonds between amide and water.     

Effects of organic modifiers on solute retention and electrokinetic migrations in micellar electrokinetic capillary chromatography.

Influences of seven organic modifiers, including urea, methanol (MeOH), dioxane (DIO), tetrahydrofuran (THF), acetonitrile (ACN), 1-propanol (1-PrOH) and 2-propanol (2-PrOH), on the solute retention and the electrokinetic migrations in micellar electrokinetic capillary chromatography (MEKC) are investigated with sodium dodecyl sulfate (SDS) micelle as pseudostationary phase. It is observed that in the limited concentration ranges used in the MEKC systems the effect of organic modifier concentration on the retention can be described by the equation logk1=logk1w-SC for most binary aqueous-organic buffer, but deviations from this retention equation are observed at ACN and particularly THF as organic modifiers. With parameter S as a measure of the elutropic strength, the elutropic strength of the organic modifiers is found to follow a general order urea 相似文献   

A Polarographic Study of Tl + , Pb 2 and Cd 2+ Complexes with Dicyclohexano-18-Crown-6 in Some Binary Mixed Solvents

The complexes of Tl⁺, Pb²⁺ and Cd²⁺ cations with the macrocyclic ligand, dicyclohexano-18-crown-6\linebreak(DC18C6) were studied in water/methanol (H₂₊O/MeOH), water/1-propanol (H₂₊O/1-PrOH), water/acetonitrile (H₂₊O/AN), water/dimethylformamide (H₂₊O/DMF), dimethylformamide/acetonitrile (DMF/AN), dimethylformamide/methanol (DMF/MeOH), dimethylformamide/1-propanol (DMF/1-PrOH) and dimethylformamide/nitromethane (DMF/NM) mixed solvents at 22 °C using differential pulse polarography (DPP), square wave polarography and conductometry. In general, the stability of the complexes was found to decrease with increasing concentration of water in aqueous/non-aqueous mixed solvents with an inverse relationship between the stability constants of the complexes and the concentration of DMF in non-aqueous mixed solvents. The results show that the change in stability of DC18C6.Tl⁺, vs the composition of solvent in DMF/AN and DMF/NM mixed solvents is apparently different from that in DMF/MeOH and DMF/1-PrOH mixed solvents. While the variation of stability constants of the DC18C6.Tl⁺ and DC18C6.Pb²⁺ complexes vs the composition of H₂₊O/AN mixed solvents is monotonic, an anomalous behavior was observed for variations of log K_f vs the composition of H₂₊O/1-PrOH and H₂₊O/MeOH mixed solvents. The selectivity order of the DC18C6 ligand for the cations was found to be Pb²⁺ > Tl⁺ > Cd²⁺.     

The dependence of the enthalpy of solution of L-methionine on the composition of water-alcohol binary solvents at 298.15 K

The integral enthalpies of solution of L-methionine in water-methanol, water-ethanol, water-n-propanol, and water-iso-propanol mixtures were measured calorimetrically at alcohol concentrations x ₂ = 0–0.4 mole fractions. The standard enthalpies of solution (Δ_sol H ^o) and transfer of L-methionine (Δ_tr H ^o) from water to a binary solvent were calculated. The influence of the structure and properties of L-methionine and the composition of aqueous-organic mixtures on its enthalpy characteristics was considered. The enthalpic pair interaction coefficients (h _xy ) between L-methionine and alcohol molecules were calculated; they were positive and increased in the series methanol (MeOH), ethanol (EtOH), n-propanol (n-PrOH), iso-propanol (i-PrOH). The enthalpy characteristics of solution and transfer of L-methionine were compared with those of glycine, L-threonine, L-alanine, and L-valine in similar binary solvents.     

Spectroscopic investigations of C3 primary alcohols on platinum electrodes in acid solutions.: Part I. n-propanol

The electrochemical behavior of n-propanol (n-PrOH) on polycrystalline Pt in acid solutions was investigated using in situ Fourier transform infrared spectroscopy (FTIRS) and on line differential electrochemical mass spectrometry (DEMS). The main products of n-PrOH oxidation are CO₂, propanal and propionic acid. Different types of adsorbates with one, two or three C atoms were detected. Ethane and propane are produced from n-PrOH adsorbates during potential cycling in the H-adatom potential region. An increase in the quantity of adsorbed CO was observed after hydrogenation of n-PrOH adsorbates.     

Pd/C promoted by Au for 2-propanol electrooxidation in alkaline media

Pd/C catalysts promoted by Au are investigated as electrocatalysts for the direct 2-propanol fuel cells in alkaline media. The results show that Pd is a good electrocatalyst for 2-propanol oxidation and the activity for 2-propanol electrooxidation is higher than that for methanol electrooxidation on the Pd/C electrocatalysts in alkaline media. Addition of Au can significantly increase the palladium catalytic activity and stability for the 2-propanol oxidation. PdAu4:1/C has higher electrocatalytic activity and better stability for the electrooxidation of 2-propanol than Pd/C and E-TEK Pt/C electrocatalysts. The present study shows the promising properties of Au promoted Pd/C as effective electrocatalysts for 2-propanol fuel based direct alcohol fuel cells.     

The conductance of electrolytes in acetone-2-propanol and acetone-1,1,1,3,3,3-hexafluoro-2-propanol mixtures at 25°C1

Precise conductance measurements are reported for tetrabutylammonium chloride, bromide, iodie, and perchlorate and lithium chloride in acetone-2-propanol (2-PrOH) and acetone-1,1,1,3,3,3-hexafluoro-2-propanol (HFP) mixtures at 25°C. Densities, viscosities and dielectric constants of the mixtures were determined. The dielectric constant vs mole % acetone curve for the acetone (ε=19.4)-2-propanol (ε=20.5) goes through a minimum at 40% acetone (ε=17.4), while that for acetone-HFP (ε=16.8) goes through a maximum at 50% acetone (ε=26.87). The variations ofK _A with ε in acetone-HFP are in accord with the predictions of electrostatic theory, while those for acetone-2-PrOH show more complex behavior. Ionic association in these mixtures is discussed in terms of an interplay between solvent structure and a multiple-step association process.     

Electrocatalytic oxidation of glucose on Ni and NiCu alloy modified glassy carbon electrode

Nickel and nickel–copper alloy modified glassy carbon electrodes (GC/Ni and GC/NiCu) prepared by galvanostatic deposition were examined for their redox processes and electro-catalytic activities towards the oxidation of glucose in alkaline solutions. The methods of cyclic voltammetry (CV) and chronoamperometry (CA) were employed. The cyclic voltammogram of NiCu alloy demonstrates the formation of β/β crystallographic forms of the nickel oxyhydroxide under prolonged repetitive potential cycling in alkaline solution. It is also observed that the overpotential for O₂ evolution increases for NiCu alloy modified electrode. In CV studies, NiCu alloy modified electrode yields significantly higher activity for glucose oxidation compared to Ni. The oxidation of glucose was concluded to be catalyzed through mediated electron transfer across the nickel hydroxide layer comprising of nickel ions of various valence states. The anodic peak currents show linear dependency with the square root of scan rate. This behavior is the characteristic of a diffusion-controlled process. Under the CA regime, the reaction followed a Cottrellian behavior, and the diffusion coefficient of glucose was found to be 1 × 10⁻⁵ cm² s⁻¹, in agreement with diffusion coefficient obtained in CV studies.     

Solvent influence on complex formation between Cd<Superscript>2+</Superscript> and 2-hydroxy-1,4-naphthoquinone in binary mixed nonaqueous solvents at 15–45°C

The complexation reaction of Cd²⁺ cation with 2-hydroxy-1,4-naphthoquinone (HNQ) was studied in acetonitrile (AN), 2-PrOH, ethyl acetate (EtOAc), EtOH, dimethylformamide (DMF) and in binary solutions AN–2-PrOH, AN–DMF, AN–EtOH, and AN–EtOAc using conductometric method at 15–45°C. The conductance data show that the stoichiometry of the Cd²⁺ complex with HNQ in all solvent systems is 1 : 1. In the pure solvents the stability of the complex changes in the order AN > 2-PrOH > EtOH > DMF. The stability of the complex at 25°C in the studied mixtures changes in the following order : AN?EtOAc > AN?2-PrOH > AN?EtOH > AN?DMF. These orders are affected by the nature and composition of the solvent systems and by the temperature. From the temperature dependence data, the thermodynamic functions values (ΔH° and ΔS°) for the complex formation were calculated.     

一步法制备纳米铂/石墨烯及电催化甲醇的交流阻抗和扩散系数测定

采用绿色还原剂抗坏血酸,一步法制备纳米铂/石墨烯。对其进行X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)形貌结构表征,铂纳米粒子均匀分散于纳米石墨烯片层褶皱间,有效减少了团聚现象。运用循环伏安法(CV)和计时电流法(CA)研究纳米铂/石墨烯对甲醇电催化氧化活性和稳定性,通过交流阻抗(EIS)定量测定,发现铂/石墨烯比铂具有更优异的电荷传输性能,电荷转移阻抗下降了34.8%。计时电量法(CC)测定得到甲醇在铂/石墨烯电极的表面扩散系数为1.42×10~(-9) cm~2·s~(-1)。与铂纳米粒子相比,纳米铂/石墨烯对甲醇电催化氧化具有更高的活性和稳定性,显著提高电极催化活性表面积和电荷传输及转移性能。     

Methanol oxidation in acidic and alkaline electrolytes using PtRuIn/C electrocatalysts prepared by borohydride reduction process

PtRuIn/C electrocatalysts( 20% metal loading by weight) were prepared by sodium borohydride reduction process using H_2PtCl6·6H_2O,RuCl_3·xH_2O and InCl_3·xH_2O as metal sources,borohydride as reducing agent and Carbon Vulcan XC72 as support. The synthetized PtRuIn/C electrocatalysts were characterized by X-ray diffraction( XRD),energy dispersive analysis( EDX),transmission electron microscopy( TEM),cyclic voltammetry( CV),chronoamperommetry( CA) and polarization curves in alkaline and acidic electrolytes( single cell experiments). The XRD patterns showPtpeaks are attributed to the face-centered cubic( fcc) structure,and a shift of Pt( fcc) peaks indicates that Ru or In is incorporated into Ptlattice. TEMmicrographs showmetal nanoparticles with an average nanoparticle size between 2.7 and 3.5 nm. Methanol oxidation in acidic and alkaline electrolytes was investigated at room temperature,by CV and CA. PtRu/C( 50 ∶ 50) shows the highest activity among all electrocatalysts in study considering methanol oxidation for acidic and alkaline electrolyte. Polarization curves at 80 ℃ showPtRuIn/C( 50 ∶ 25 ∶ 25)with superior performance for methanol oxidation,when compared to Pt/C,PtIn/C and PtRu/C for both electrolytes. The best performance obtained by PtRuIn/C( 50 ∶ 25 ∶ 25) in real conditions could be associated with the increased kinetics reaction and/or with the occurrence simultaneously of the bifunctional mechanism and electronic effect resulting from the presence of Ptalloy.     

NaOH溶液中Ni基石墨修饰电极上甲醇电氧化过程中钴与铜的协同效应

在NaOH溶液(0.1 mol/L)中考察了Ni, Co和Cu二元和三元合金修饰的石墨电极上甲醇电氧化反应性能.采用循环伏安法、计时电流法和电化学阻抗谱(EIS)等技术研究了修饰电极的催化活性和协同效应.这些催化剂在含有Ni, Cu和Co离子溶液的阴极电位上反复浸渍石墨电极制得.结果表明,在甲醇存在下, Ni基三元合金修饰电极(G/NiCuCo)对甲醇氧化反应的响应值明显高于其它样品.阳极峰值电流与扫描速率的平方根呈线性关系,表明该过程受扩散控制.在CA区域,该反应遵循Cottrellin特性,甲醇扩散系数为6.25×10–6 cm2/s.甲醇氧化反应速率常数为40×107 cm3/(mol·s).另外,采用EIS研究了修饰电极表面上甲醇催化氧化反应.     

Dispersed platinum supported by hydrogen molybdenum bronze-modified carbon as electrocatalyst for methanol oxidation

A new electrocatalyst, Pt/H_xMoO₃-C, for methanol oxidation, was prepared by dispersing platinum nano-particles on Vulcan XC-72 modified by hydrogen molybdenum bronze (H_xMoO₃, 0 ≤ x ≤ 2). The modification of Vulcan XC-72 with H_xMoO₃ on was accomplished by reducing the adsorbed molybdic acid and the platinum nano-particles were dispersed on the modified carbon by reducing chloroplatinic acid, with formaldehyde as the reductant. The prepared Pt/H_xMoO₃-C was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersion spectrometer, cyclic voltammetry (CV), chronoamperometry (CA), and single-cell test, with a comparison of the electrocatalyst, carbon-supported platinum (Pt/C) prepared under the same condition but without the modification. The results obtained from XRD and SEM showed that the modification of Vulcan XC-72 with H_xMoO₃ reduced the platinum particle size and improved distribution uniformity of platinum on carbon. The results, obtained from CV, CA, and the single-cell test, showed that Pt/H_xMoO₃-C exhibited better electrocatalytic activity toward methanol oxidation than Pt/C.     

Comparison of solvent mixtures for pressurized solvent extraction of soil fatty acid biomarkers

The extraction and transesterification of soil lipids into fatty acid methyl esters (FAMEs) is a useful technique for studying soil microbial communities. The objective of this study was to find the best solvent mixture to extract soil lipids with a pressurized solvent extractor system. Four solvent mixtures were selected for testing: chloroform:methanol:phosphate buffer (1:2:0.8, v/v/v), chloroform:methanol (1:2, v/v), hexane:2-propanol (3:2, v/v) and acetone. Soils were from agricultural fields and had a wide range of clay, organic matter and microbial biomass contents. Total lipid fatty acid methyl esters (TL-FAMEs) were the extractable soil lipids identified and quantified with gas chromatography and flame ionization detection. Concentrations of TL-FAMEs ranged from 57.3 to 542.2 n mole g⁻¹ soil (dry weight basis). The highest concentrations of TL-FAMEs were extracted with chloroform:methanol:buffer or chloroform:methanol mixtures than with the hexane:2-propanol or acetone solvents. The concentrations of TL-FAMEs in chemical groups, including saturated, branched, mono- and poly-unsaturated and hydroxy fatty acids were assessed, and biological groups (soil bacteria, mycorrhizal fungi, saprophytic fungi and higher plants) was distinguished. The extraction efficiency for the chemical and biological groups followed the general trend of: chloroform:methanol:buffer ≥ chloroform:methanol > hexane:2-propanol = acetone. Discriminant analysis revealed differences in TL-FAME profiles based on the solvent mixture and the soil type. Although solvent mixtures containing chloroform and methanol were the most efficient for extracting lipids from the agricultural soils in this study, soil properties and the lipid groups to be studied should be considered when selecting a solvent mixture. According to our knowledge, this is the first report of soil lipid extraction with hexane:2-propanol or acetone in a pressurized solvent extraction system.     

5-Hydroxy-3-phenyl-5-vinyl-2-isoxazoline and 3-phenyl-5-vinylisoxazole: synthesis and reactivity

5-Hydroxy-3-phenyl-5-vinyl-2-isoxazoline has been synthesized by reacting benzonitrile oxide with the enolate ion of methyl vinyl ketone. From 5-hydroxy-5-vinyl-2-isoxazoline, 5-vinylisoxazole was then quantitatively obtained by dehydration-aromatization under acidic conditions. Similar results, though not quantitative, were also found by treatment in 2-propanol under basic conditions (i-PrOH/H₂O, Na₂CO₃, reflux). In contrast to 2-propanol, reactions performed in methanol (and, in part, those carried out in ethanol) revealed a more complex behaviour, the nucleophilic addition of ROH onto the vinyl group being mainly observed. Nucleophilic addition was also found with alkyllithiums. The mechanism of the nucleophilic addition is discussed. Epoxidation and further reaction with benzonitrile oxide of both 3-hydroxy-5-phenyl-5-vinyl-2-isoxazoline and 3-phenyl-5-vinylisoxazole are also described.     

配体对钯纳米催化剂的形成及其电活性的影响

分别在EDTA,甘氨酸(Gly)和木质素磺酸钠(Ls)存在下,以硼氢化钠为还原剂,将Pd²⁺还原为Pd纳米颗粒并负载在多壁碳纳米管(MWCNT)表面。采用扫描电镜(SEM),透射电镜(TEM)和X射线衍射(XRD)对纳米Pd催化剂的形貌和微结构进行了表征。结果表明:EDTA存在时,所形成的Pd纳米颗粒(Pd-EDTA/MWCNT)的粒径更小,在MWCNT上的分散度更高。采用循环伏安(CV)和计时伏安技术(CA),研究了催化剂在碱性环境中对乙醇的电催化活性。在碱性溶液中对乙醇氧化的电化学研究表明:在Pd-EDTA/MWCNT催化剂上,乙醇氧化反应的起始电位较低,电流密度最大,电子传递阻力较小,反应速率较大,并且对乙醇氧化的电催化活性保持稳定。     

配位体对钯纳米催化剂的形成及其电活性的影响

分别在EDTA,甘氨酸(Gly)和木质素磺酸钠(Ls)存在下,以硼氢化钠为还原剂,将Pd²⁺还原为Pd纳米颗粒并负载在多壁碳纳米管(MWCNT)表面。采用扫描电镜(SEM),透射电镜(TEM)和X射线衍射(XRD)对纳米Pd催化剂的形貌和微结构进行了表征。结果表明:EDTA存在时,所形成的Pd纳米颗粒(Pd-EDTA/MWCNT)的粒径更小,在MWCNT上的分散度更高。采用循环伏安(CV)和计时伏安技术(CA),研究了催化剂在碱性环境中对乙醇的电催化活性。在碱性溶液中对乙醇氧化的电化学研究表明:在Pd-EDTA/MWCNT催化剂上,乙醇氧化反应的起始电位较低,电流密度最大,电子传递阻力较小,反应速率较大,并且对乙醇氧化的电催化活性保持稳定。