含有机硅多嵌段共聚物的研究Ⅳ.含有机硅多嵌段共聚物的富氧功能

研究了几种新型含有机硅二元和三元多嵌段共聚物的氧、氮选择透过性能。其中双酚A聚羟基醚-聚二甲基硅氧烷二元多嵌段共聚物-(PHE-PDMS)_n的透氧系数Po_2=510Barrer、氧氮分离系数a o_2/N_2=2.2,聚苯醚-聚二甲基硅氧烷-聚对羟基苯乙烯三元多嵌段共聚物-(PPO-PDMS-pHS)_n的Po_2=156 Barrer、do_2/N_2=2.4,两者都具有良好的力学性能。此外,含有机硅三元多嵌段共聚物与聚三甲硅基丙炔(PTMSP)起薄复合后,改善了PTMSP超薄膜的透气稳定性。其JO_2≈1.0×10~(-3)cm~2/cm~2·s·cmHg,do_2/N_2≥2.0。     

聚1—三甲硅基丙炔膜的溴化和气体透过性

在新的气体分离膜材料中,聚1-三甲硅基丙炔(PTMSP)以其高的气体透过性和优异的成超薄膜性而引起各方面的兴趣。目前的研究热点是如何提高PTMSP的氧氮透过分离系数(ao_2/N_2)和气体透过稳定性。Langsam用氮稀释的氟气对PTMSP膜进行表面氟化处理,大幅度地提高了膜的ao_2/N_2,但处理过程中伴随着剧烈的裂解,控制困难。Gozds以N-溴代丁     

聚反丁烯二酸酯的结构与性能

采用自由基聚合法合成了的聚反丁烯二酸二特丁酯(PDtBF)、聚反丁烯二酸二异丙酯(PDiPF)、聚反丁烯二酸二仲丁酯(PDsBF)、聚反丁烯二酸二仲戊酯(PDsAF)、聚反丁烯二酸二环已酯(PDCHF)和聚反丁烯二酸甲基异丙基酯(PMiPF)这六种不同的反丁烯二酸酯类聚合物,利用~1H-NMR、~(13)C-NMR等表征手段对上述几种聚合物的链结构进行了分析表征。利用X-射线衍射方法对聚合物的聚集态结构进行了研究,结果表明,上述几种聚合物均具有较高的分子量,并表现出很强的脆性,聚合物的分子链间距随聚合物中酯基体积的增大而增加,对聚合物的热性能等进行了初步研究。     

聚[(六氟异丙氧基)_(2-x)(三氟乙氧基)_x]磷腈合成和气体分离性能研究

合成制备了聚磷腈类高分子——聚[(六氟异丙氧基)2-x(三氟乙氧基)x]磷腈,并通过NMR、FTIR、XRD、GPC、DSC等测试手段对聚合物进行了结构表征和性能测试,通过压力法透气性能测定仪测定了聚合物膜对N2、O2、CH4、CO2、He、H2等气体的透过性能.结果表明,三氟乙氧基的竞争取代能力较六氟异丙氧基稍强;得到x值分别为1.64、1.72和1.81的3种聚合物;其玻璃化温度Tg为-20.21℃、-42.83℃和-43.41℃;重均分子量为5.06×105、1.49×105和2.69×105;两种取代基比例适中时显示出较高的气体透过性能,渗透系数PN2=20barrer,PCO2=124barrer,PHe=85barrer;CO2/CH4和He/CH4的选择系数达到11.5和4.8,在天然气的净化和回收He中显示了潜力;H2/N2的选择系数达到6,而PH2=43barrer,在合成NH3尾气中回收H2存在发展前景。     

改性硅橡胶富氧膜的制备

富氧膜是近年来发展起来的一种能制备富氧空气的新技术。目前国内外使用最广的富氧膜材料是甲基硅氧烷(通常称为硅橡胶)它的透氧系数Po_2=6×10~(-8)cm~3(STP)·cm/cm~2·S·cmHg,C_(O_2/N_2)=2.0,透气速度快,但机械性能较差,须予以改性,改     

反丁烯二酸酯类共聚物的结构与性能

反丁烯二酸酯类单体的聚合反应研究结果表明,反丁烯二酸二异丙酯(DiPF)、反丁烯二酸二叔丁酯(DtBF)等单体形成的聚合物是一种具有较高分子量的非常脆的高分子材料;而由反丁烯二酸二正烷基酯,如反丁烯二酸二正丙酯(DnPF)等单体所形成的聚合物则是一种分子量较低的粘稠状聚合物。为了改善聚合物的力学性能,我们曾对DiPF和DtBF单体分别同反丁烯二酸二正丙酯(DnPF)、反丁烯二酸二正丁酯(DnBF)、反丁烯二酸二正戊酯     

CF4等离子体表面氟化PTMSP膜

本文对聚三甲基硅基丙炔(PTMSP)膜进行CF_4等离子体表面氟化研究。改性的PTMSP膜氧氮选择性显著提高(P_(O_2)/P_(N_2)=4-5,P_(O_2)=10~2-10~3barrer)。等离子体改性条件,如处理时间、单体压力、放电功率对PTMSP膜透气性的影响进行了研究。XPS谱分析表明改性后,膜表层化学组成发生了显著变化、碳硅含量大幅度减小,氟含量随着处理程度的增加而增加,氟碳比与膜的选择性有着密切的关系,当 F/C>1时,膜的P_(O_2)/P_(N_2)可达4以上。     

含硅聚酰亚胺和有机硅改性的联苯型聚酰亚胺透气性能的研究

本文合成了一系列均聚和共聚酰亚胺,研究了它们对H_2、O_2和N_2三种气体的透过性能与分子结构之间的关系。结果表明,在30℃和6atm的条件下,SiDA-ODA对H_2和O_2的透过系数分别为11.7和0.764Barrer,比BPDA-ODA高一个数量级;H_2/N_2和O_2/N_2分离系数分别为113和7.4在(BPDA/SiDA)-ODA共聚物中,随着SiDA含量的增加,其透氢系数P_(H_2)和透氧系数P_(O_2)均有较大的增加,而H_2/N_2和O_2/N_2分离系数则降低。当SiDA含量占二酐组分的60%时,P_(H_2)和P_(H_2)/P_(N_2)分离系数分别达8.78Barrer和147。     

密胺苯二醛多孔聚合物/聚二甲基硅氧烷混合基质膜的制备及气体分离性能

以溶液复合成膜法制备了密胺苯二醛多孔聚合物(MA)/聚二甲基硅氧烷(PDMS)混合基质膜,利用扫描电镜(SEM)表征了混合基质膜的形貌。考察了不同MA用量下MA/PDMS混合基质膜的气体分离性能,结果表明,MA的加入可以在提高PDMS膜渗透系数的同时提高CO_2气体分离选择性;随着混合基质膜中MA含量的增加,混合基质膜的渗透系数均明显提高,气体分离选择性则先增大后减小。双组分混合气体分离测试结果表明,MA/PDMS(1.2%(w,质量分数))混合基质膜对CO_2/N_2和CO_2/CH_4的分离选择性分别是19.2和6.0,CO_2的渗透系数达到8100Barrer,均高于纯PDMS膜。MA/PDMS(1.2%(w))混合基质膜对CO_2/N_2混合气的分离性能突破了Robeson上限。     

反丁烯二酸二异丙酯的自由基聚合

以偶氮二异丁腈(AIBN)为引发剂,反丁烯二酸二异丙酯的聚合反应是按双键开链式加聚反应机理进行的。聚合反应的表观活化能为79.8kJ/mol。同时还测定了聚合物的某些热性能。     

Monte Carlo Simulations of the Phase Separation of a Copolymer Blend in a Thin Film

Monte Carlo simulations were carried out to study the phase separation of a copolymer blend comprising an alternating copolymer and/or block copolymer in a thin film, and a phase diagram was constructed with a series of composed recipes. The effects of composition and segregation strength on phase separation were discussed in detail. The chain conformation of the block copolymer and alternating copolymer were investigated with changes of the segregation strength. Our simulations revealed that the segment distribution along the copolymer chain and the segregation strength between coarse‐grained beads are two important parameters controlling phase separation and chain conformation in thin films of a copolymer blend. A well‐controlled phase separation in the copolymer blend can be used to fabricate novel nanostructures.     

聚醚醚酮链段连接方式与其性能关系的研究

利用亲核取代反应,通过缩聚法合成了一种新型聚芳醚酮50％交替共聚物PEDEK-PETMDEK,通过¹HNMR证明其具有预期的结构.通过考察50％无规共聚物、50％交替共聚物、均聚物PEDEK和PET-MDEK的溶解性和热性能,发现聚醚醚酮共聚物的链段连接方式对聚合物性能有很大影响.50％交替共聚物是一种无定形固体,易溶于通常的有机溶剂,而50％无规共聚物却是半结晶聚合物,除浓硫酸外几乎不溶于任何溶剂;50％交替共聚物具有比50％无规共聚物更高的玻璃化转变温度.     

Preparation and characterization of temperature and pH-sensitive chitosan material and its controlled release on coenzyme A

A novel copolymer P(CS–Ma–DMAEMA) was synthesized with chitosan (CS), maleic anhydride (Ma) and 2-(dimethylamino)ethyl methacrylate (DMAEMA) by grafting and copolymerization. The copolymer obtained was analyzed by FT-IR, ¹H NMR and UV, and the molecular weight and polydispersity were determined by gel permeation chromatography (GPC). The average size and distribution of copolymer micelles were determined by dynamic light scattering (DLS). Their aqueous solution properties and controlled coenzyme A delivery were also studied. It was found that the copolymer had temperature sensitivity and pH sensitivity. The factors affecting release behavior, such as concentration, pH and temperature were discussed in this paper. The higher concentration of the copolymer aqueous solution absorbed more coenzyme A than the lower one. The increasing temperature accelerated the drug release from the copolymer. The pH of the copolymer solution had significant impact on the release of coenzyme A. The results suggested that the novel copolymer could be used as drug delivery carrier.     

Characterization of styrene–acrylonitrile copolymer by pyrolysis gas chromatography

Samples of styrene–acrylonitrile (SAN) copolymer of different compositions, molecular weights, block copolymers, and a blend of styrene and acrylonitrile homopolymers were prepared and characterized by the method of pyrolysis gas chromatography. On decomposition of SAN copolymer samples at 645°C, eleven components were identified, the most important of them being styrene, acrylonitrile, and propionitrile. By examination of the pyrolyzate composition during pyrolysis of the SAN copolymer of different compositions, it was established that the propionitrile yield was definitely decreased when the acrylonitrile concentration in copolymer was about 60 mole-%. Further, from the propionitrile yield, we could distinguish random SAN copolymer from the styrene-acrylonitrile homopolymer blend, and on the basis of propionitrile yield some information on the molecular structure of the copolymer could be obtained. The styrene yield depends linearly on the copolymer composition. This permits determination of copolymer composition on the basis of the styrene yield. Furthermore, the effects of decomposition temperature and of molecular weight on the yields of styrene and acrylonitrile were examined.     

COMPUTER SIMULATION OF MISCIBILITY AND SELF-ASSEMBLY STRUCTURE FOR POLYMER-CONTAINING SYSTEMS WITH SPECIAL INTERACTIONS

The miscibility and structure of A-B copolymer/C homopolymer blends with special interactions were studied by aMonte Carlo simulation in two dimensions. The interaction between segment A and segment C was repulsive, whereas it wasattractive between segment B and segment C. In order to study the effect of copolymer chain structure on the morphologyand structure of A-B copolymer/C homopolymer blends, the alternating, random and block A-B copolymers were introducedinto the blends, respectively. The simulation results indicated that the miscibility of A-B block copolymer/C homopolymerblends depended on the chain structure of the A-B copolymer. Compared with alternating or random copolymer, the blockcopolymer, especially the diblock copolymer, could lead to a poor miscibility of A-B copolymer/C homopolymer blends.Moreover, for diblock A-B copolymer/C homopolymer blends, obvious self-organized core-shell smicture was observed inthe segment B composition region from 20% to 60%. However if diblock copolymer composition in the blends is less than40%, obvious self-organized core-shell structure could be formed in the B-segment component region from 10 to 90%.Furthermore, computer statistical analysis for the simulation results showed that the core sizes tended to increasecontinuously and their distribution became wider with decreasing B-segment component.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

马来酸与二甲基烯两基胺共聚合成结构规整的聚两性电解质的研究

研究了马来酸与二甲基烯丙基胺共聚物的组成及其交替共聚机理。对共聚物等电点、絮凝性能测定结果表明，该共聚物具聚两性电解质的特性。通过红外光谱及差热分析，探讨了共聚物的微观结构。     

An experimental study on saturation swelling of styrene–acryronitrile copolymer particles with styrene and acrylonitrile monomers

The saturation swelling behavior of styrene and acrylonitrile (SAN) copolymer particles with a styrene (St) and acrylonitrile (AN) comonomer mixture was investigated experimentally. The effects of the copolymer composition and the compositional inhomogeneity in SAN Copolymer particles on their swelling behavior were examined. The experimental results show that both the copolymer composition and the compositional inhomogeneity in SAN copolymer particles have little or no influence on the swellability of SAN copolymer particles with a St and AN comonomer mixture, as long as the weight fraction of AN monomer units in SAN copolymer particles is less than a certain value between 0.6 and 0.8. With increasing AN content in the copolymer particles beyond this value, however, the swellability of SAN copolymer particles gradually decreases. Semiempirical equations are proposed, which correlate the saturation concentration of each monomer in SAN copolymer particles as a function of the comonomer composition in the monomer droplets and the overall copolymer composition in SAN copolymer particles. © 1994 John Wiley & Sons, Inc.     

Ultrafine palladium particles immobilized on polymer microspheres

Ultrafine palladium particles immobilized on submicrometer copolymer microspheres were prepared by reduction of palladium ions in the presence of the copolymer microspheres. Copolymer microspheres with surface carboxylic or cyano functionality were used. Transmission electron microscopy observation and X-ray diffraction analysis indicated that ultrafine palladium particles of nanometer size were formed and were attached on the surface of the copolymer microspheres. The interaction between palladium particles and surface functionality of the copolymer microspheres was studied by IR spectroscopy and X-ray photoelectron spectroscopy. Received: 9 February 2000 Accepted: 17 August 2000     

1-(4-二甲基硅氢苯基)-1-苯乙烯/异戊二烯的活性阴离子交替共聚合调控研究

采用活性阴离子聚合方法研究了硅氢基功能化的1,1-二苯基乙烯(DPE)衍生物1-(4-二甲基硅氢苯基)-1-苯乙烯(DPE-SiH)与异戊二烯(Ip)在苯中的共聚反应,采用多种方法对序列分布、竞聚率和表观速率常数等进行测定.结果表明无调节剂下共聚物链中异戊二烯的插入量远多于DPE-SiH,DPE-SiH主要分布在聚合物...