Improved perovskite solar cell efficiency by tuning the colloidal size and free ion concentration in precursor solution using formic acid additive

Improving the quality of the perovskite active layer is crucial to obtaining high performance perovskite solar cells(PSCs). In this work, by introducing formic acid into the formamidinium lead iodide(FAPbI3)precursor solution, we managed to achieve reduced colloidal size in the solution, leading to more uniform deposition of FAPbI3 film with lower trap state density and higher carrier mobility. The solar cells based on the FAPbI3 absorber layer modified with formic acid show significantly better photovoltaic performance than that on the reference FAPbI3 film without formic acid. The device performance shows a close correlation with the colloidal size. Within the range studied from 6.7 to 1.0 nm, the smaller the colloidal size is, the higher the solar cell efficiency. More specifically, the cell efficiency is improved from17.82% for the control cell without formic acid to 19.81% when 0.764 M formic acid was used. Formic acid has also been added into a CH_3NH_3PbI_3(MAPbI_3) precursor solution, which exhibits a similar effect on the resulting MAPb I3 films and solar cells, with efficiency improved from 16.07% to 17.00%.     

Photocurrent hysteresis related to ion motion in metal-organic perovskites

Perovskite solar cells have attracted considerable attention in the photovoltaic field for their high efficiency achieved in a short period of time.However,hystersis behaviour was often observed during the photocurrent-voltage measurement causes uncertainty in evaluation of photovoltaic efficiency.In this letter,we report a systematic investigation on the cause of hysteresis via series of TiO_2 based planar heterojunction structured perovskite solar cell devices.The results reveal organic cation ions,such as the commonly employed CH_3NH_3~+ or HC(NH_2)_2~+,play critical role on the observed hysteresis effect above the 298 K via interaction with iodide.We further suggest an efficient hole/electron transport in devices can inhibit such hysteresis behavior.Our conclusion sheds light onto the underlying hysteresis mechanisms,and proposes possible solutions to overcome the issue,which offers guidelines for future development of perovskite devices.     

Improved Photovoltaic Performance from High Quality Perovskite Thin Film Grown with the Assistance of PC71BM

The strategy of sequentially spin-coating a perovskite film from the perovskite precursor and an electron transporting layer of [6,6]-phenyl-C_(71)-butyric acid methyl ester(PC_(71)BM) is developed to simplify the fabrication procedure of perovskite solar cells. X-ray diffraction and scanning electron microscopy indicate that PC_(71)BM film on perovskite layer can retard the evaporation of dimethyl sulfoxide(DMSO) efficiently, thus prolonging the transformation of intermediate phase to perovskite crystals, leading to a high quality perovskite thin film. The solar cells with the structure of indium tin oxides(ITO)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)/CH_3NH_3PbI_3/PC_(71)BM/bathocuproine(BCP)/Ag made from this simplified method exhibit a higher efficiency(12.68%) than those from the conventional one-step method(9.49%).     

ZnO/ZnS core-shell composites for low-temperature-processed perovskite solar cells

Electron transport layers(ETLs)in perovskite solar cells(PSCs)are a key factor to determine the photovoltaic performance.Herein,we demonstrate preparation of Zn O/ZnS core-shell composites through directly synthesizing ZnS on the ZnO nanoparticles in solution.We confirmed the formation of ZnO/ZnS core-shell composites by the uses of X-ray diffraction patterns and the Fourier transform infrared spectroscopy.ZnO/ZnS composites exhibit much homogeneous surface morphology as compared with the bare Zn O as revealed in the scanning electronic microscopy.Moreover,the upper shift of conduction band level upon composition of the Zn O/Zn S film results in a better alignment of energy level,which facilitates cascade charge extraction and thus improves the current density of perovskite solar cell.The shift of conduction band also improves the voltage of the PSCs.The photoluminescence(PL)spectroscopies measured in both steady and transient states were carried out to characterize the charge extraction at the interface between CH_3NH_3PbI_3and the electron transport layers of either ZnO or ZnO/ZnS composite.The ZnO/ZnS composite can more efficiently quench the PL signal of perovskite absorber than bare Zn O resulting in enhanced photocurrent generation in PSCs.     

Graded interface engineering of 3D/2D halide perovskite solar cells through ultrathin(PEA)_2PbI_4 nanosheets

2D halide perovskites have emerged as promising materials because of their stability and passivation effect in perovskite solar cells(PSCs).However,the introduction of bulky organic ammonium cations from 2D halide perovskites would decrease the device performance generally compared to the traditional 3D MAPbI_3.Incorporation of ultrathin 2D halide perovskite nanosheets(NSs) with 3D MAPbI_3 could address this issue.Herein,we re port a rationally designed PSCs with dimensional graded 3D/2D MAPbI_3/(PEA)2 PbI_4 heterojunction,in which 2D(PEA)2 PbI_4 NSs were synthesized and incorporated between 3D MAPbI_3 and hole-transporting layer.Besides the significantly improved stability,a notable increasement in power conversion efficiency(PCE) of 20% was obtained for the 3D/2D perovskite solar cells due to the favourable band alignment among(PEA)_2 PbI_4 NSs and the other components.The graded structure of MAPbI_3/(PEA)2 PbI_4 would upshift the energy level continuously,which enhances the hole extraction efficiency thus reduces the interface charge recombination,leading to the increasements of VOC from1.04 V to 1.07 V,Jsc from 21.81 mA/cm~2 to 23.15 mA/cm~2 and the fill factor from 67.89% to 74.78%,and therefore an overall PCE of 18.53%.     

A repeated interdiffusion method for efficient planar formamidinium perovskite solar cells

A repeated interdiffusion method is described for phase-stable and high-quality(FA,MA)PbI_3 film. The crystallization and growth of the perovskite films can be well controlled by adjusting the reactant concentrations.With this method, dense, smooth perovskite films with large crystals have been obtained. Finally, a PCE of 16.5% as well as a steady-state efficiency of 16.3% is achieved in the planar perovskite solar cell.     

ABX3型钙钛矿光伏材料的结构与性质调控

近年来,钙钛矿太阳能电池由于其效率高、制造成本低、工艺简单等特点受到广泛关注,成为目前太阳能电池领域的研究热点。在钙钛矿太阳能电池中,无机-有机杂化ABX₃材料非常重要。它既作为光吸收材料,同时又作为载流子传输材料,因此它的光电性质直接影响到太阳能电池的效率。本文综述了调控无机有机金属卤化物ABX₃型钙钛矿光伏材料结构和性质的几种途径。     

钙钛矿光伏电池封装材料与工艺研究进展

钙钛矿太阳能电池作为第3代新概念太阳能电池,具有高光电转换效率、低成本和可柔性加工等优点,近年来发展迅速,其光电转换效率从一开始的3.8%增长到近期的25.5%,逐渐比肩硅电池,已接近商业化应用水平。目前,实现钙钛矿太阳能电池产业应用的关键环节在于电池封装,它不仅可以解决钙钛矿光伏器件稳定性问题,还可以实现电池安全、环保和延长使用寿命等要求。结合近十几年来钙钛矿光伏电池封装材料和封装工艺两方面的发展现状,文中介绍了钙钛矿电池封装领域取得的成果和存在的不足,讨论了目前现有封装技术的优缺点,以及它们适用的不同器件类型。着重在不同温度湿度条件下,比较了不同封装材料性能、封装工艺条件对钙钛矿电池效率及稳定性的影响,归纳出影响钙钛矿电池薄膜封装效果的3个关键因素： 聚合物的弹性模量、水蒸气透过率、加工温度。比较了不同聚合物薄膜封装材料适宜的加工温度、优缺点及加工成本。可以看出,随着钙钛矿光伏电池工业化需求的强烈增长和人们对其封装材料研究的不断深入,研究适合大面积生产和光伏建筑一体化的新型功能聚合物封装材料将是必然趋势。     

Rapid development in two-dimensional layered perovskite materials and their application in solar cells

This review summarized recent research progresses of two-dimensional layered organic-inorganic hybrid perovskite materials and their photovoltaic performances in 2D perovskite solar cells.     

钙钛矿型太阳能电池制备工艺及稳定性研究进展

有机-无机杂化钙钛矿型太阳能电池因其简单的制备工艺,低廉的制造成本,优异的光电转换效率,成为光伏领域的研究热点。钙钛矿光吸收材料具有消光系数高、载流子迁移率高、载流子寿命长、带隙可调控等优点。短短几年内,钙钛矿型太阳能电池的效率从最初的3.8%提高到22.1%。目前,为了获得稳定高效的钙钛矿型太阳能电池,主要有以下几个研究思路:新型器件结构设计;结构功能层的材料形貌设计;结构各功能层间的界面修饰;空穴传输材料的选择;对电极的选择。本文通过文献综述,在回顾了国内外研究者对钙钛矿型太阳能电池的研究历程的基础上,介绍了钙钛矿型太阳能电池的结构和工作原理,重点总结了电子传输层和钙钛矿层的制备工艺及优化,并讨论了钙钛矿型太阳能电池的稳定性以及展望了其商业化的前景。     

钙钛矿型太阳能电池制备工艺及稳定性研究进展

有机-无机杂化钙钛矿型太阳能电池因其简单的制备工艺,低廉的制造成本,优异的光电转换效率,成为光伏领域的研究热点。钙钛矿光吸收材料具有消光系数高、载流子迁移率高、载流子寿命长、带隙可调控等优点。短短几年内,钙钛矿型太阳能电池的效率从最初的3.8%提高到22.1%。目前,为了获得稳定高效的钙钛矿型太阳能电池,主要有以下几个研究思路：新型器件结构设计;结构功能层的材料形貌设计;结构各功能层间的界面修饰;空穴传输材料的选择;对电极的选择。本文通过文献综述,在回顾了国内外研究者对钙钛矿型太阳能电池的研究历程的基础上,介绍了钙钛矿型太阳能电池的结构和工作原理,重点总结了电子传输层和钙钛矿层的制备工艺及优化,并讨论了钙钛矿型太阳能电池的稳定性以及展望了其商业化的前景。     

Lead‐Free Solar Cells based on Tin Halide Perovskite Films with High Coverage and Improved Aggregation

Two simple methods to improve tin halide perovskite film structure are introduced, aimed at increasing the power conversion efficiency of lead free perovskite solar cells. First, a hot antisolvent treatment (HAT) was found to increase the film coverage and prevent electrical shunting in the photovoltaic device. Second, it was discovered that annealing under a low partial pressure of dimethyl sulfoxide vapor increased the average crystallite size. The topographical and electrical qualities of the perovskite films are substantively improved as a result of the combined treatments, facilitating the fabrication of tin‐based perovskite solar cell devices with power conversion efficiencies of over 7 %.     

Effect of hole-transporting materials on the photovoltaic performance and stability of all-ambient-processed perovskite solar cells

High-efficiency perovskite solar cells(PSCs) reported hitherto have been mostly prepared in a moisture and oxygen-free glove-box atmosphere, which hampers upscaling and real-time performance assessment of this exciting photovoltaic technology. In this work, we have systematically studied the feasibility of allambient-processing of PSCs and evaluated their photovoltaic performance. It has been shown that phasepure crystalline tetragonal MAPbI_3 perovskite films are instantly formed in ambient air at room temperature by a two-step spin coating process, undermining the need for dry atmosphere and post-annealing.All-ambient-processed PSCs with a configuration of FTO/TiO_2/MAPbI_3/Spiro-OMeTAD/Au achieve opencircuit voltage(990 mV) and short-circuit current density(20.31 mA/cm~2) comparable to those of best reported glove-box processed devices. Nevertheless, device power conversion efficiency is still constrained at 5% by the unusually low fill-factor of 0.25. Dark current–voltage characteristics reveal poor conductivity of hole-transporting layer caused by lack of oxidized spiro-OMe TAD species, resulting in high seriesresistance and decreased fill-factor. The study also establishes that the above limitations can be readily overcome by employing an inorganic p-type semiconductor, copper thiocyanate, as ambient-processable hole-transporting layer to yield a fill-factor of 0.54 and a power conversion efficiency of 7.19%. The present findings can have important implications in industrially viable fabrication of large-area PSCs.     

Low temperature fabrication for high-performance semitransparent CsPbI2Br perovskite solar cells

All-inorganic Cs Pb I₂Br perovskite with suitable bandgap and excellent thermal stability has been reported as the most promising candidate for efficient perovskite solar cells（PSCs）. However, the high annealing temperature（> 250 °C） and poor stability of α-Cs Pb I₂Br greatly limit the future application in photovoltaic field. Herein, a facile method is reported to prepare α-Cs Pb I₂Br perovskite film with high stability at low temperature（70 °C） by incorporat...     

钙钛矿太阳电池的工作机理及性能的主要影响因素

本文综合评述了钙钛矿太阳电池的重要研究成果, 解释了其工作机理并总结了影响电池性能的关键因素: 钙钛矿化学组成、 结晶与形貌、 传输层、 电极和体异质结等. 对钙钛矿太阳电池的未来发展进行了展望.     

Progress of all-perovskite tandem solar cells: the role of narrow-bandgap absorbers

Perovskite solar cells(PSCs)have gained increasing attention due to their excellent photovoltaic performance,achieving certified power conversion efficiency(PCE)of 25.2%.To further enhance PCE and break the Shockley-Queisser limit of the single junction PSCs,great efforts have been made in tandem solar cells based on perovskite,including perovskite/Si,and perovskite/perovskite(all-perovskite).Among them,all-perovskite tandem solar cells exhibit unique advantages of both lowcost fabrication and high efficiency.They have advanced rapidly in these years,due to the realization of stable and efficient narrow-bandgap perovskites.In this work,we review the development of monolithic all-perovskite tandem solar cells and highlight the critical role of narrow-bandgap perovskites in recent progress of all-perovskite solar cells.We also propose our perspective of future directions on this subject.     

Intermediates transformation for efficient perovskite solar cells

Perovskite materials have made a great progress in terms of the power conversion efficiency(PCE), rising from 3.8% to 25.2%. To obtain pinhole-free, superior crystal, and high-quality perovskite films with less defect, intermediates transformation is important, which has been clearly studied and widely applied.In this review, we systematically summarize the commonly formed intermediates and detailedly analyze their mechanisms from five aspects:(1) Solvent-induced intermediate;(2) HI-induced intermediate;(3)CH3NH2-induced intermediate;(4) MAAc-induced intermediate;(5) other intermediates. Finally, we also provide some prospects on high-quality perovskite fabrication based on using intermediates prudently.     

Interfacial Engineering for Efficient Low-Temperature Flexible Perovskite Solar Cells

Photovoltaic technology with low weight, high specific power in cold environments, and compatibility with flexible fabrication is highly desired for near-space vehicles and polar region applications. Herein, we demonstrate efficient low-temperature flexible perovskite solar cells by improving the interfacial contact between electron-transport layer (ETL) and perovskite layer. We find that the adsorbed oxygen active sites and oxygen vacancies of flexible tin oxide (SnO₂) ETL layer can be effectively decreased by incorporating a trace amount of titanium tetrachloride (TiCl₄). The effective defects elimination at the interfacial increases the electron mobility of flexible SnO₂ layer, regulates band alignment at the perovskite/SnO₂ interface, induces larger perovskite crystal growth, and improves charge collection efficiency in a complete solar cell. Correspondingly, the improved interfacial contact transforms into high-performance solar cells under one-sun illumination (AM 1.5G) with efficiencies up to 23.7 % at 218 K, which might open up a new era of application of this emerging flexible photovoltaic technology to low-temperature environments such as near-space and polar regions.     

Recent Progress and Emerging Applications of Rare Earth Doped Phosphor Materials for Dye‐Sensitized and Perovskite Solar Cells: A Review

Although the efficiency of Dye‐sensitized and Perovskite solar cell is still below the performance level of market dominance silicon solar cells, in last few years they have grabbed significant attention because of their fabrication ease using low‐cost materials, and henceforth these cells are considered as a promising alternative to commercial photovoltaic devices. However, third generation solar cells have significant absorption in the visible region of solar spectrum, which confines their power conversion efficiency. Subsequently, the performance of current photovoltaics is significantly hampered by the transmission loss of sub‐band‐gap photons. To overcome these issues, rare earth doped luminescent materials is the favorable route followed to convert these transmitted sub‐band‐gap photons into above‐band‐gap light, where solar cells typically have significant light‐scattering effects. Moreover, the rare earth based down/up conversion material facilitates the improvement in sensitization, light‐scattering and device stability of these devices. This review provides insight into the application of various down/up conversion materials for Dye‐sensitized and perovskite solar cell applications. Additionally, the paper discusses the techniques to improve the photovoltaic performance in terms of current density and photo voltage in detail.     

钙钛矿太阳能电池中吸收层的研究进展

钙钛矿太阳能电池因具有成本低、制备容易和光电性能优异等突出特点受到了广泛关注.钙钛矿太阳能电池能量转化效率已从2009年的3.8%提升到2019年的25.2%.我们在文中重点总结了钙钛矿电池吸收层的制备工艺,掺杂和晶体组成、结构调控方面取得的重要进展,以及这些突破对电池效率提高的贡献,同时也提出了钙钛矿太阳能电池发展仍需要解决的问题.