Studies on the Reaction of Substituted 6-Nitrocoumarin with Anilines

Greatat'tentionhasbeenpaidtocoumarinsfortheirmulti-activityagainstseveraldiseasessuchascancer,AIDS.Inordertoobtainsomemoreeffectiveanti-tumorcompounds,wedesignedaseriesofcoumarinderivativeswithanovelretinoidsstructure.WhenweattemptedtosynthesisaSchiffbaseofnitrosubstituted3-acetylcoumarins,however,itissurprisinglyfoundthatanewreactionoccurredandasmallersizedSchiffbasewasobtained.'H-NMR,"C-NMR,MSandelementalanalysisshowedthatthenewcompoundwasaheterocyclicringfissionproductI(Schemel).Othe…     

Studies on Kinetics of Crystallization of PA6／UFAPR Composites

The influence of Ultrafine Full-Vulcanized Acrylate Powdered Rubber(UFAPR) on the isothermal crys-tallization kinetics and nonisothermal crystallization behavior of PA8 has been studied by means of DSC. The results show that with the introduction of a small amount of UFAPR, the crystallization rate of PA8 can be increased obviously, and the crystallization temperature range can be augmented and the crystallite size distri-bution of the crystal can be narrowed down. The change of free energy perpendicular to the crystal nucleus, which has been calculated according to the Hoffman theory, is consistent with the result of Avrami′s equa-tion. The unit surface free energy of the radial-developing crystal spherulite decreases while the crystalliza-tion rate of PA8 increases with the introduction of UFAPR. Meanwhile, it is shown by means of the polariz-ing microscope(PLM) that the crystal size drops down and the number of the crystal grains augments with the addition of UFAPR, which shows that UFAPR can function as a nucleating agent.     

Action of Base on Methyl 6-Thio- (and 6-Deoxy-) 2-O-Methanesulfonyl-α-d-Glucopyranoside Derivatives1

Abstract

Treatment of methyl 4-O-benzoyl-3-O-tert-butyldiphenylsilyl-2-O-methanesulfonyl-6-thio-α-d-glucopyranoside (8) and its 6-deoxy analogue (11) with methanolic sodium methoxide, afforded methyl 2,3-anhydro-mannopyranoside derivatives as a consequence of an O₃ → O₄ TBDPS rearrangement. When the protecting group at C-3 was 2-methoxyethoxy methyl ether only deacylation and methanolysis of the methanesulfonyl group occurred.     

Influence of Cu6PS5І superionic nanoparticles on the dielectric properties of 6СВ liquid crystal

Influence of Cu₆PS₅? nanoparticles on the dielectric properties of planarly oriented 6СВ liquid crystal (LC) is studied in the 10–10⁶-Hz frequency range. Introduction of the nanoparticles is shown to result in an increase of the electric conductivity. Contrary to 6СНВТ LC, the conductivity monotonously depends on the nanoparticles’ concentration. The main reason of the much greater influence of Cu₆PS₅? nanoparticles on the 6СВ conductivity in comparison with 6СНВТ is related to a greater dissociation coefficient of Cu₆PS₅? in 6СВ than in 6СНВТ. This is confirmed by the fact that the dipole moment of the 6СВ molecules is greater than that of the 6СНВТ molecules.     

A Conformational Study on the Interaction of Saporin-S6 with Phospholipid Vesicles

ＡＣｏｎｆｏｒｍａｔｉｏｎａｌＳｔｕｄｙｏｎｔｈｅＩｎｔｅｒａｃｔｉｏｎｏｆＳａｐｏｒｉｎ－Ｓ６ｗｉｔｈＰｈｏｓｐｈｏｌｉｐｉｄＶｅｓｉｃｌｅｓＨＡＯＱｉａｎｇ,ＧＵＡＮＺｈｏｎｇ－ｈｕｉ,ＹＡＮＬｉ,ＺＨＡＮＧＹａｎ,ＹＡＮＧａｎｇ－ｌｉｎ,ＬＩＵ...     

Synthesis and antiadrenergic properties of β-substituted alcohols based on 6-hydroxymethylpyridoxine

An approach to the synthesis of epoxides based on 6-hydroxymethylpyridoxine acetals was developed. The epoxides obtained were involved in the ring opening reactions by nitrogen-, oxygen-, and sulfur-containing nucleophiles. Cytotoxicity and antiadrenergic properties of some synthesized compounds were studied on the models in situ and in vivo.     

Development of an energy-based approach for optimized frequency selection for fatigue testing on polymers – Exemplified on polyamide 6

Polymers and composite materials show temperature-dependent material properties. Therefore, the frequency resembles a critical part in fatigue testing, due to its influence on the self-heating of the polymeric material and thereby on the number of cycles to failure. The aim of this paper is the development of a testing method, which allows comparable results with varying frequencies. To minimize the self-heating effect on the fatigue behavior, a model was established for selecting optimized frequencies regarding the load-specific temperature increase of the specimen. A new energy-parameter, the induced energy-rate, was introduced and correlated to the load-specific increase in temperature in multiple and constant amplitude tests at ambient conditions. With this approach, it was possible to determine a threshold value for the newly defined induced energy-rate. A stress-specific model was developed and a limit frequency was calculated. The results were verified in multiple and constant amplitude tests and S/N-curves.     

Studies on nucleophilic substitution reactions with η6-o-dichlorobenzene-η5-cyclopentadienyliron hexafluorophosphate

Reaction of η⁶-o-dichlorobenzene-η⁵-cyclopentadienyliron hexafluorophosphate (IPF₆) with an excess of phenol or p-thiocresol in the presence of K₂CO₃ could give disubstitution of both chloro groups of I, while a similar reaction with one equivalent of the nucleophile, and under conditions of high dilution, monosubstitution of only one of the chloro groups of I could be obtained. Similarly, di- or monosubstitution could be brought about under appropriate conditions with benzyl or methyl alcohol as the source of the nucleophile. While no reaction could take place between IPF₆ and aniline, a reaction did occur between IPF₆ and o-anisidine (o-methoxyaniline), but only the monosubstitution product was obtained, even in the presence of an excess of o-anisidine. Similar results of monosubstitution were observed with other nucleophiles containing the NH₂ group, including NH₃, NH₂NH₂, CH₃NH₂ and C₆H₅CH₂NH₂. These findings are consistent with the reported differences in yields when IPF₆ was treated with two nucleophilic groups (OH, SH and/or NH₂) located in the 1,2-positions of a benzene ring to give CpFe complexes of heterocyclic systems related to 9,10-dihydroanthracene with two hetero-atoms at the 9,10-positions [15]. Reactions were also carried out between IPF₆ and the carbanion-enolate anion derived from acetylacetone, α-benzoylacetophenone, diethyl malonate or ethyl acetoacetate. In these cases, only monosubstitution of one of the chloro groups of I was observed, leading to the formation of a CC bond. A possible explanation for the formation of only monosubstitution products in reactions with N- or C-containing nucleophiles is discussed.     

Theoretical Studies on the Mechanism of Photocycloaddition Reaction Between 6 Azauracil and Acetone

The mechanism of photocycloaddition reaction between 6-azauracll and acetone was studied by using semiemptrical SCFMO AMI method. It was found that this reaction is not a concerted one. The calculated results are as follows:(1) A T1 state exciplex is on the T1 state energy surface; (2) T exciplex as a reactant will proceed along the energy surface of T1 state to form a diradical intermediate. The energy barrier of this reaction step is 63. 6 kJ/mol; (3) The T1 state diradical intermediate happens to be close in energy to the ground state intermediate with a similar geometry. Such a situation turns out to be very favorable for an intersystem crossing (jump from the T, state to the ground state) ; (4) The final product will be formed from the ground S0 state intermediate via an energy barrier 88. 2 kJ/mol.     

Effect of LET on radiolysis of C6−C8 cycloalkane systems

The - and -radiolysis of cyclohexane, cycloheptane and cyclooctane was investigated in the absence and presence of iodine scavenger. Comparison of the distributions of products formed revealed considerable differences between - and -radiolysis, and the decomposition of strainless cyclohexane and strained cycloheptane and cyclooctane.     

Synthesis and characterisation of novel glycoclusters based on cell penetrating heptakis(6-aminoethylamino-6-deoxy)-??-cyclodextrin

The modification of a polyamino ??CD, heptakis(6-aminoethylamino-6-deoxy)-??CD (bpen) with several monosaccharides (Man, GlcNAc, Gal, Glc), specific for bacterial lectin targeting is described. The first synthetic approach, based on disuccinimidyl carbonate-substituted monosaccharides had moderate success, whereas the second approach, based on thiopropanoic acid-linked monosaccharides, was more efficient. Each method gave the best result with a different monosaccharide. Given that bpen is known to penetrate cells, the new products are expected to possess both lectin recognition ability and membrane crossing properties.     

Effects of polyamide 6 on the crystallization and melting behavior of β-nucleated polypropylene

Non-nucleated polypropylene alloy with polyamide 6 (PP/PA6) and β-nucleated polypropylene (β-PP)/PA6 alloy, as well as its compatibilized version with maleic anhydride grafted PP (PP-g-MA) were prepared with an internal mixer. In the all alloys, PP formed a continuous phase with a dispersive PA6. Effects of PA6 on the non-isothermal crystallization behavior, melting characteristics and the β-PP content of alloys were investigated by differential scanning calorimeter (DSC) and wide angle X-ray diffraction (WAXD). The results indicated that the crystallization temperature () of PP shifts to high temperature in the non-nucleated PP/PA6 alloys due to the α-nucleating effect of PA6. However, in the β-nucleated PP/PA6 alloys, PA6 hardly has an effect on the of PP. The β-PP content in the alloys not only depends on the content of the PA6, but also on the melting temperatures. It is proved by etching the alloys with sulfuric acid that the nucleating agent mainly disperses in the PA6 phase and/or the interface between PP and PA6 when blended at high temperature. Addition of PP-g-MA promotes the formation of β-PP in the β-nucleated PP/PA6 alloys. The increase in the PA6 content has a little influence on the of PP and the β-PP content in the compatibilized β-nucleated PP/PA6 alloys. The non-isothermal crystallization kinetics of PP in the alloys was evaluated by Mo’s method.     

Isomer Effect on Energy Storage of π-Extended S-Shaped Double[6]Heterohelicene

Recently, chiral and nonplanar cutouts of graphene have been the favorites due to their unique optical, electronic, and redox properties and high solubility compared with their planar counterparts. Despite the remarkable progress in helicenes, π-extended heterohelicenes have not been widely explored. As an anode in a lithium-ion battery, the racemic mixture of π-extended double heterohelical nanographene containing thienothiophene core exhibited a high lithium storage capability, attaining a specific capacity of 424 mAh g⁻¹ at 0.1 A g⁻¹ with excellent rate capability and superior long-term cycling performance over 6000 cycles with negligible fade. As a first report, the π-extended helicene isomer (PP and MM), with the more interlayer distance that helps faster diffusion of ions, has exhibited a high capacity of 300 mAh g⁻¹ at 2 A g⁻¹ with long-term cycling performance over 1500 cycles compared to the less performing MP and PM isomer and racemic mixture (150 mAh g⁻¹ at 2 A g⁻¹). As supported by single-crystal X-ray analysis, a unique molecular design of nanographenes with a fixed (helical) molecular geometry, avoiding restacking of the layers, renders better performance as an anode in lithium-ion batteries. Interestingly, the recycled nanographene anode material displayed comparable performance.     

Theoretical Studies on the Conformation of mono-6-O-p-nitrobenzoyl-β-cyclodextrin in Aqueous Solution

It is well known that a substituted cyclodextrin (CD) can often form a self-included complex, in which the substituent group is incarcerated into the CD cavity1. The phenomenon is interesting, as the self-inclusion is a nice model of protein folding2 and it has also been successfully used in the construction of various molecular devices3. Studies have showed that van der Waals force, hydrophobic effect, and electrostatic interaction are the major driving forces leading to the self-inclusion4…     

Gas Hydrate Frameworks of Allen's Polyhedra. 2. Frameworks on 3–6 and 3–5–6 Nets

The structure of two classes of water molecule frameworks built up of 5¹²(D), 5¹²6²(T), 5¹²6³(P), and 5¹²6⁴(H) polyhedra is discussed. Polyhedral layers can be distinguished in the frameworks. The centers of the polyhedra belonging to a layer are at the nodes of planar networks consisting of triangular, pentagonal, and hexagonal meshes. The structure of one network determines exclusively the topology of the entire framework. Frameworks on 3–6 nets can be constructed of two types of polyhedral blocks: D₃T₂P₂and D₂T₆. Frameworks on 3–5–6 nets might include both specific blocks and the blocks involved in the frameworks on 3–5 and 3–6 nets. The paper analyzes the structure of frameworks on the nets built as a series of rows, each of these rows being constructed of pentagons or hexagons exclusively. These frameworks are described by the formula (D₃T₂P₂) _x (D₄H₂) _y (D₂T₆) _z , where x 1, y 0, and z 0 (x, y, and z are integers). Since all known frameworks of Allen's polyhedra satisfy this formula, they can be constructed of fragments of gas hydrate lattices with the CS1, CS2, and HS1 structures because they are derivatives of these key structures. Similar frameworks can be constructed of other tetrahedral particles (C, Si, SiO₂, etc.).     

Halogenation of the Hexaphosphabenzene Complex [(Cp*Mo)2(μ,η6:η6-P6)]: Snapshots on the Reaction Progress

The oxidation of [(Cp*Mo)₂(μ,η⁶:η⁶-P₆)] ( 1 ) with halogens or halogen sources was investigated. The iodination afforded the ionic complexes [(Cp*Mo)₂(μ,η³:η³-P₃)(μ,η¹:η¹:η¹:η¹-P₃I₃)][X] (X=I₃⁻, I⁻) ( 2 ) and [(Cp*Mo)₂(μ,η⁴:η⁴-P₄)(μ-PI₂)][I₃] ( 3 ), while the reaction with PBr₅ led to the complexes [(Cp*Mo)₂(μ,η³:η³-P₃)(μ-Br)₂][Cp*MoBr₄] ( 4 ) [(Cp*MoBr)₂(μ,η³:η³-P₃)(μ,η¹-P₂Br₃)] ( 5 ) and [(Cp*Mo)₂(μ-PBr₂)(μ-PHBr)(μ-Br)₂] ( 6 ). The reaction of 1 with the far stronger oxidizing agent PCl₅ was followed via time- and temperature-dependent ³¹P{¹H} NMR spectroscopy. One of the first intermediates detected at 193 K was [(Cp*Mo)₂(μ,η³:η³-P₃)(μ-PCl₂)₂][PCl₆] ( 8 ) which rearranges upon warming to [(Cp*Mo)₂(μ-PCl₂)₂(μ-Cl)₂] ( 9 ), [(Cp*MoCl)₂(μ,η³:η³-P₃)(μ-PCl₂)] ( 10 ) and [(Cp*Mo)₂(μ,η⁴:η⁴-P₄)(μ-PCl₂)][Cp*MoCl₄] ( 11 ), which could be isolated at room temperature. All complexes were characterized by single-crystal X-ray diffraction, NMR spectroscopy and their electronic structures were elucidated by DFT calculations.     

Influence of π-stacking on the N7 and O6 proton affinity of guanine

The influence of π-stacking interactions between guanine (G) and the side chain of tyrosine (Tyr) on the N7 and O6 proton affinities of guanine and on the capability of these sites to act as hydrogen bond acceptors is analyzed at the B3LYP-D, M05-2X and MP2 levels of theory. With all methods, results from full geometry optimizations indicate that stacking interactions increase the N7 and O6 proton affinities by about 5–6 kcal mol^?1, the increase being slightly larger for N7. Consistently with these results, hydrogen bond distances between guanine and one water molecule decrease in the stacked system. Moreover, interaction energy between H₂O and (G-Tyr) is found to be 2–3 kcal mol^?1 larger than in G···H₂O. This strengthening arises from the additional Tyr–H₂O stabilizing interactions and from a cooperative interplay between stacking and hydrogen bond forces.