Spectrophotometric determination of trace amounts of beryllium using 1,8-dihydroxyanthrone as a new chromogenic reagent

A simple, rapid, and sensitive spectrophotometric method for the trace level determination of beryllium based on the formation of a 1:2 complex with anthralin (1,8-dihydroxyanthrone) as a new reagent is developed. A spectrophotometric method was used to determine the acidity constant and stepwise proton dissociation of the reagent. The experimental conditions for determining beryllium including the influences of pH, reagent concentration and time were evaluated and optimized. Under the optimum experimental conditions, the molar absorptivity of the complex is 0.47 × 10⁴ l mol^?1 cm^?1 at 545 nm. Calibration graph was linear in the range of 0.04–1.04 μg ml^?1 with a detection limit of 0.012 μg ml^?1 and a %RSD of 0.43%, for 5 replicate determinations at 0.48 μg ml^?1 of Be(II). The interferring effect of some cations and anions was also studied. The method was applied for the determination of beryllium in beryl, silicate rock and alloys. Ethylenediaminetetraacetic acid (EDTA) was used for masking interfering ions.     

1,2-萘醌-4-磺酸钠作为显色剂分光光度法测定阿魏酸哌嗪

建立了用1,2-萘醌-4-磺酸钠测定阿魏酸哌嗪的新方法.在pH 13.0的KCl-NaoH缓冲溶液中,阿魏酸哌嗪与1,2-萘醌-4-磺酸钠反应形成红褐色产物,其最大吸收波长为484 nm.阿魏酸哌嗪浓度在0.4～80μg/mL范围内呈现良好线性关系.线性回归方程为A=0.07742+0.01216ρ(μg/mL),线性相关系数r=0.9986,表观摩尔吸光系数5.8×103 L/mol/cm,相对标准偏差(RSD)和检出限分别为0.84%和0.29μg/mL.对药物样品中阿魏酸哌嗪的含量进行测定,平均回收率在95.1%～103.3%.     

1,2-萘醌-4-磺酸钠试剂分光光度法测定葡萄糖

建立了用1, 2-萘醌-4-磺酸钠测定葡萄糖的新方法. 研究表明, 在pH 13.00的缓冲溶液中, 葡萄糖能够催化1,2-萘醌-4-磺酸钠与OH-反应生成2-羟基-1, 4-萘醌, 其最大吸收波长为454 nm. 葡萄糖质量浓度在0.8～80 mg/L范围内, 呈现良好线性关系. 线性回归方程为A＝0.0165+0.01004c(10-5 mol/L), 线性相关系数r＝0.9985. RSD和检出限分别为0.92%, 0.7 mg/L. 该法能够直接用于注射液中葡萄糖含量的测定.     

Spectrophotometric determination of aminomethylbenzoic acid using sodium 1,2-naphthoquinone-4-sulfonate as the chemical derivative chromogenic reagent

A new method has been established for the determination of aminomethylbenzoic acid using sodium 1,2-naphthoquinone-4-sulfonate as the chemical derivative chromogenic reagent. This method is based on the formation of a pink compound from the reaction of aminomethylbenzoic acid and sodium 1,2-naphthoquinone-4-sulfonate. The nucleophilic substitution reaction proceeds quantitatively in pH 12.0 buffer solution. The stoichiometric ratio of the reaction, maximum absorption wavelength and the value of epsilon(430) were 1:1, 430 nm, and 2.87 x 10(3)L mol(-1)cm(-1), respectively. Beer's law was obeyed in the range of 0.80-80 mg/L of aminomethylbenzoic acid. The data have been filled to a linear regression equation A=0.03183+0.01658C (mg/L), with a correlation coefficient of 0.9996. The detection limit is 0.11 mg/L, R.S.D. is 0.54%, and average recovery is over 99.6%. This paper further improves the determination of aminomethylbenzoic acid compared to the previous methods. The kinetic property and reaction mechanism have also been discussed. This proposed method has been successfully applied to the determination of aminomethylbenzoic acid in injection of aminomethylbenzoic acid with satisfactory results.     

1, 2-萘醌-4-磺酸钠分光光度法测定间苯二酚

在pH 13.00缓冲溶液中, 间苯二酚能够催化氢氧根离子与1,2-萘醌-4-磺酸钠反应生成2-羟基-1, 4-萘醌, 其最大吸收波长为454 nm. 间苯二酚质量浓度在0.39～13.21 mg/L范围内与吸光度呈现良好线性关系. 线性回归方程为A=0.01918+0.05703c (×105 mol/L), 相关系数r=0.9981. RSD和检测限分别为1.6%, 0.34 mg/L (3σ/k). 该法能够直接用于水样中间苯二酚含量测定, 回收率在94.3%～106%.     

分光光度法测定盐酸多巴胺的含量

研究了氨水溶液中,FeCl3与盐酸多巴胺反应生成紫红色络合物,其最大吸收波长为507 nm,络合比为1∶2.体系的吸光度与盐酸多巴胺的浓度在20.0～220 mg/L范围内呈良好的线性关系,线性回归方程A=0.00842+0.11844 ρ(mg/L),相关系数r=0.9991,表观摩尔吸光系数ε=2.25×104L·...     

Spectrophotometric determination of procaine hydrochloride in pharmaceutical products using 1,2-naphthoquinone-4-sulfonic acid as the chromogenic reagent

Spectrophotometric determination of procaine hydrochloride is described. The procaine hydrochloride reacts with 1,2-naphthoquinone-4-sulfonic acid in pH 3.60 buffer solution to form a salmon pink compound, and its maximum absorption wavelength is at 484 nm, epsilon(484)=5.22 x 10(3).The absorbance for procaine hydrochloride from 0.30 to 100 microg ml(-1) obeys Beer's law. The linear regression equation of the calibration graph is C=19.23A-0.03, with a linear regression correlative coefficient is 0.9996, the detection limit is 0.28 microg ml(-1); recovery is from 98.0 to 105.2%. Effects of pH, surfactant, organic solvent, foreign ions, and standing time on the determination of procaine hydrochloride have been examined. This method is rapid and simple, and can be used for the determination of procaine hydrochloride in injection solution of procaine hydrochloride. The results obtained by this method agreed with those by the official method (dead-stop titration).     

Spectrophotometric determination of vanadium and niobium: Xylenol orange as a chromogenic reagent

Summary The formation of red coloured chelates of vanadium(V) and niobium(V) with xylenol orange (DCAC) having _max at 490 nm (at p_H 5.0) and 530 nm (at p_H 5.5) have been reported. The colour formation has been applied to the spectrophotometric determination of metal ions. The colour has been found to be stable between p_H 3.5–6.5 and 2.0–7.0 respectively. The sensitivity of the reagent is 0.051g/cm² of vanadium and 0.093g/cm² of niobium. Maximum colour intensity has been found for Nb-DCAC chelate at p_H 5.5 whereas no appreciable change has been found for V-DCAC chelate between p_H 4.5 and 6.5.

---

Zusammenfassung Über die Bildung rot gefärbter Chelate von Vanadin und Niob mit Xylenolorange wurde berichtet. Deren Absorptionsmaxima liegen bei 490 nm (p_H 5,0) bzw. bei 530 nm (p_H 5,5). Die Farbreaktion wurde für die Bestimmung der beiden Metalle verwendet. Die Farbe ist zwischen p_H 3,5 und 6,5 bzw. zwischen p_H 2,0 und 7,0 stabil. Die Empfindlichkeit für Vanadin beträgt 0,051g/cm², für Niob 0,093g/cm². Die Farbe des Niobchelates erreicht bei p_H 5,5 ein Maximum, während die des Vanadinchelates zwischen p_H 4,5 und 6,5 keine wesentlichen Änderungen erkennen läßt.

     

用硼酸作为显色剂光度法测定阿昔洛韦

在pH12.00的缓冲溶液中,阿昔洛韦(ACV)与H3BO3形成组成比为1∶1的反应产物,其最大吸收波长λmax=289 nm,ACV的质量浓度在0.48～57.6 mg/L范围内与吸光度成良好关系,线性回归方程A=-0.01796+0.01624ρ,相关系数r=0.9990,表观摩尔吸光系数ε=3.7×103L.mol-1.cm-1,回收率为99.9%～101.6%。据此建立了测定ACV的新方法,能够直接用于药物样品中ACV的测定。     

Spectrophotometric determination of osmium: Sulphanilic acid as a reagent

Sulphanilic acid has been found to be a very effective reagent for the spectrophotometric determination (if hexavalent and octavalent osmium in the pH range between 1.8 – 3.5. In these two valence states, the element forms a dark-violet complex with the reagent, the absorption maximum of the complex being at 490 mμ. As most of the other ions interfere in the determination, the element must be separated as osmic acid by nitric acid distillation. Beer's law is obeyed in the case of 0.5 to 9 p.p.m. of osmium (VIII) and l to 18 p.p.m. of osmium (VI); tin-optimum concentration ranges are from 2 to 8 p.p.m. for osmium(VIII) and from 4 to 16 p.p.m. for osmium(Vl). In these ranges, the % relative errors per 1% absolute photometric error are 3.02 for osmium (VIII) and 3.1 for osmium(VI). Application of the method of continuous variations and the molar ratio method indicates that in solution hexavalent osmium and the reagent form a 1:2. complex, with an average dissociation constant of 1.2 ? 10^-7.     

Spectrophotometric determination of osmium : O-Aminophenol-p-sulphonic acid as a reagent

o-Aminophenol-p-sulphonic acid is suggested as a very sensitive reagent for spectrophotometric determination of osmium (VI) and (VIII) at pH 2 5–4. The absorption maximum is at 440 mμ and the optimum concentration range is from 2 to 8 p p m of osmium Moderate amounts of Pd⁺², lr⁺⁴, WO₄^-2, Cr⁺³, Zn⁺², Zr⁺⁴, Mg⁺², Ba⁺² and Sr⁺² do not interfere     

Spectrophotometric determination of ascorbic acid using copper(II)-neocuproine reagent in beverages and pharmaceuticals

The proposed method for ascorbic acid (Vitamin C) (AA) determination is based on the oxidation of AA to dehydroascorbic acid with a Cu(II)-2,9-dimethyl-1,10-phenanthroline (neocuproine (Nc)) reagent in ammonium acetate-containing medium at pH 7, where the absorbance of the formed bis(Nc)-copper(I) chelate is measured at 450 nm. This chelate was formed immediately and the apparent molar absorptivity for AA was found to be 1.60 × 10⁴ dm³ mol⁻¹ cm⁻¹. Beer's law was obeyed between 8.0 × 10⁻⁶ and 8.0 × 10⁻⁵ M concentration range. The relative standard deviation for 90 μg AA was 3%. The Cu(II)-Nc reagent is a milder and therefore more selective oxidant than the conventional Fe(III)-1,10-phenanthroline (phen) reagent used for the same assay. This feature makes the proposed method superior for real samples such as fruit juices containing weak reductants such as citrate, oxalate and tartarate that otherwise produce positive errors in the Fe(III)-phen method when equilibrium is achieved. The developed method was applied to a number of commercial fruit juices, pharmaceutical preparations containing Vitamin C, and red wine. The meta-bisulfite content of wine was removed with an anion exchanger at pH 3 prior to analysis, and a difference extractive–spectrophotometric method of AA assay in wine was developed so as to suppress the interferences caused by wine anthocyanins and polyphenols. The findings of the developed method for fruit juices and pharmaceuticals were also statistically compared with those of HPLC so as to establish it as a reliable novel method.     

Spectrophotometric determination of dapsone in pharmaceutical products using sodium 1,2-naphthoquinone-4-sulfonic as the chromogenic reagent

Spectrophotometric determination of dapsone is described. The dapsone reacts with sodium 1,2-naphthoquinone-4-sulfonic in pH 6.98 buffer solution to form a salmon pink compound, and its maximum absorption wavelength is at 525 nm, epsilon525=3.68 x 10(4) l mol(-1) cm(-1). The absorbance of dapsone from 0.40 to 10 microg ml(-1) obeys Beer's law. The linear regression equation of the calibration graph is C=0.2334 A + 0.01288, with a linear regression correlation coefficient of 0.9998, the detection limit is 0.24 microg ml(-1), and recovery is from 99.2 to 102.4%. Effects of pH, surfactant, organic solvents, foreign ions, and standing time on the determination of dapsone have been examined. This method is simple and can be used for the determination of dapsone in injection solution of dapsone. The results obtained by this method agreed with those by the official method (dead-stop titration method [The Chinese Pharmacopoeia, Pharmacopoeia Commission, Ministry of Health, vol. 2, fifth ed., PRC Chemical Industry Press, Beijing, 2000, p.720]).     

Indirect spectrophotometric determination of reducing sugars and ascorbic acid using phenolphthalin as reagent

Summary An indirect spectrophotometric method has been developed for the determination of reducing sugars and ascorbic acid. A known excess of ferricyanide is allowed to react with the reductant, and the surplus ferricyanide is determined spectrophotometrically with phenolphthalin. The method is simple and reproducible, with an error of less than 2%.

---

Indirekte spektrophotometrische Bestimmung reduzierender Zucker und der Askorbinsäure mit Phenolphthalin

Zusammenfassung Ein gemessener Überschuß von Eisen(III) cyanid wird mit der reduzierenden Probe umgesetzt und der nicht verbrauchte Anteil mit Phenol-phthalin spektrophotometrisch bestimmt. Das Verfahren ist einfach und gut reproduzierbar. Der Fehler ist geringer als 2%.

     

Isophthaldihydroxamic acid as analytical reagent: Spectrophotometric determination of manganese

The reactivity of isophthaldihydroxamic acid against inorganic ions is established. The spectrophotometric study of its reaction with Mn(II) shows that a complex of stoichiometry 1:2 (Mn:L) is formed (? = 3760 liters · mol^?1 · cm^?1 at 490 nm). A spectrophotometric method is developed for the determination of manganese in the range 3–9 ppm.     

Spectrophotometric determination of Chromium(VI) using cyclam as a reagent

A simple, rapid, sensitive, and inexpensive method for spectrophotometric determination of chromium(VI), based on the absorbance of its complex with 1,4,8,11-tetraazacyclotetradecane (cyclam) is presented. The complex showed a molar absorbtivity of 1.5?×?10⁴?L?mol^?1?cm^?1 at 379?nm. Under optimum experimental conditions, a pH of 4.5 and 1.960?×?10³?mg?L^?1 cyclam were selected, and all measurements were performed 10?min after mixing. Major cations and anions did not show any interference; Beer's law was applicable in the concentration range 0.2–20?mg?L^?1 with a detection limit of 0.001?mg?L^?1. The standard deviation in the determination is ±0.5?mg?L^?1 for a 15.0?mg?L^?1 solution (n?=?7). The described method provides a simple and reliable means for determination of Cr(VI) in real samples.     

Spectrophotometric determination of clotrimazole and Phenylephrine-HCl in pharmaceutical formulation using 1, 2-naphthoquinone-4-Sulphonic acid sodium salt (NQS) as a chromogenic reagent

A sensitive, rapid and economical spectrophotometric method based on their interaction with NQS reagent in basic medium, which produces orange-colored complexes, has been devised to identify many drugs with amino groups (clotrimazole and phenylephrine-HCl). The maximum absorption for the complexes of clotrimazole and phenylephrine-HCl is 455 and 484 nm, respectively. Beer's law is applicable in the concentration ranges of (2–40) μg/ml for clotrimazole and (0–20) μg/ml for phenylephrine-HCl. The molar absorptivity values are 3931.1760 L/mol.cm and 4521.4074 L/mol.cm of clotrimazole and phenylephrine-HCl respectively with accuracy of 100.0285%–103.1456% and RSD better than 3.3211%. The method has been successfully used to determine these medications in pharmaceutical formulations, and it has been found to be superior to British Pharmacopeia standard procedures. At a 95% confidence level, F and t-tests are less than the tabulated values.