Determination of copper(II) based on its catalytic effect on thiosemicarbazide-H(2)O(2)-CTMAB chemiluminescence reaction

A novel chemiluminescence (CL) reaction, thiosemicarbazide (TSC)–H₂O₂, for the determination of copper at nanogram per milliliter level in batch type is described. The method is based on the catalytic effect of copper(II) on the oxidation of TSC with hydrogen peroxide to produce light emission. The emitted light was observed by using a conventional fluorescence detector. In the optimum conditions, calibration graph was linear in the range of 0.1–1.3 ppm. The limit of detection was 10 ppb. The relative standard deviation for five determinations of 0.5 ppm copper(II) was 1.93%. The proposed method permitted the selective and sensitive determination of Cu(II) in human hair and wheat flour with sufficient precision. The possible mechanism for the new chemiluminescence reaction was also discussed.     

Spectrophotometric determination of manganese by using redox reaction of tris(2,2'-bipyridine)osmium(II) with Mn7+.

This paper reports on the analytical application of the oxidation reaction of [Os(bpy)3]2+ by Mn7+ (MnO4-). The present study developed a very simple, sensitive and selective spectrophotometric method for the determination of manganese in an acidic medium. Three analytical wavelengths were employed in the UV and visible regions at 290, 315 and 480 nm. Beer's law was obeyed up to a concentration of 330 ng ml(-1) of Mn7+ at different wavelengths with regression equations 0.001 - 0.0042C(Mn), 0.001 + 0.0021C(Mn), and 0.001 - 9.34 x 10(-4)C(Mn) at 290, 315 and 480 nm, respectively. Under the optimum conditions, the achieved detection limits were 0.72, 1.37 and 3.32 ng ml(-1) at 290, 315, and 480 nm, respectively. In addition to the high sensitivity of the method (0.24 ng cm(-2) at 290 nm, 0.45 ng cm(-2) at 315 nm and 1.0 ng cm(-2) at 480 nm), it can be used for the determination of manganese in the presence of a large number of anions and cations, since it tolerates most of the potential interferents. The relative standard deviation was 0.5% (n = 11) for 90 ng ml(-1) manganese. The method was successfully applied to the determination of manganese in water from different resources.     

Copper(II) determination by means of a thermometric method based on its catalytic effect on the hydrazine-hydrogen peroxide reaction

A new catalytic-thermometric method for Cu(II) determination at ppb levels has been established based on the hydrazine-hydrogen peroxide redox reaction. The reaction rate is obtained from the temperature-time curve and shows two linear response zones, between 15–200 ppb and 0.1–0.9 ppm, with a relative standard deviation of 2.0% and 2.2%, respectively. Only 20 ppm of Pb(II) and Fe(III), 1 ppm of Mn(II) and 5 ppb of Co(II) interfere. Interferences of Pb(II) and Fe(III) can be eliminated by the use of maskings. The proposed method can be applied to determine Cu(II) in several samples. In the present paper, this method has been applied to determine Cu(II) in wine.     

Chemiluminescence investigation of NH(2)OH-fluorescein-Cu(2+) system and its application to copper analysis in serum

A novel chemiluminescent system, fluorescein-NH(2)OHOH(-), was developed for the determination of copper(II) in serum. A weak light emission arises from hydroxylamine in the presence of the organic reagent fluorescein in basic aqueous solution. Under the conditions of 1.2 x 10(-3) mol l(-1) NH(2)OH and 5 x 10(-3) mol l(-3) fluorescein, the light intensity is linearly dependent upon the concentration of copper(II) within the range 1-20 ppb. The relative standard deviation of the determination of copper(II) is 4.2% (n = 13) and the detection limit is 0.5 ppb. The system is highly selective for copper except in the presence of iron(II,III) and cobalt(II). In conjunction with potassium fluoride as masking agent, the method was successfully applied to the determination of microamounts of copper(II) in serum. A mechanistic study of the chemiluminescence reaction is also discussed.     

A simple and rapid flow injection chemiluminescence determination of cysteine with Ru(phen)3(2+)-Ce(IV) system

A new chemiluminescence system was developed for the determination of cysteine by flow injection system. This method is based on the reaction of L-cysteine with Ru(phen)3(2+) and Ce(IV) to produce chemiluminescence. The calibration curve was linear over the range 8.0x10(-7) to 4.0x10(-5) and 4.0x10(-5) to 1.0x10(-3) M with a detection limit of 7.0x10(-7) M (S/N=3). The relative standard deviation of 4.0x10(-6) M cysteine was found 3.5% (n=10). The influence of potential interfering substances was studied. The proposed method was successfully applied for the flow injection determination of cysteine in the real samples with minimum sampling rate of 90 sample/h.     

Sensitivity improvement of ammonia determination based on flow-injection indophenol spectrophotometry with manganese(II) ion as a catalyst and analysis of exhaust gas of thermal power plant.

The sensitivity improvement of a flow-injection spectrophotometric method for the determination of ammonia was examined based on an indophenol blue coloration reaction with salicylate and hypochlorite in the presence of manganese(II) as a reaction promotion catalyst. The optimal conditions for achieving higher sensitivity of ammonia determination were examined using a three-line flow system. The limit of detection corresponding to a signal-to-noise ratio (S/N) of 3 was 0.005 mg l(-1) (approximately equal to 5 ppb) of NH4+. A calibration graph was linear in the range from 5 ppb to 1,000 ppb of ammonium ion. The relative standard deviations (n = 9) for 50 ppb and 100 ppb of ammonium ion were 6.4% and 2.2%, respectively. The proposed method was applied to the determination of ammonia in the exhaust gas of a thermal power plant. Prior to the FIA determination, ammonia in the exhaust gas was absorbed into a boric acid solution; the absorption solution was then analyzed by the proposed FIA.     

Flow-injection chemiluminescence determination of quinine using on-line electrogenerated cobalt(III) as oxidant

A novel chemiluminescence (CL) flow system for the determination of quinine is described. It is based on the direct chemiluminescence reaction of quinine and cobalt(III) in sulfuric acid medium. The unstable Co(III) was on-line electrogenerated by constant-current electrolysis. The chemiluminescence intensity was linear with a quinine concentration in the range of 0.1-100 mug ml(-1). The determination limit was 3.3x10(-8) g ml(-1). The whole process could be completed in 1 min. The proposed method is suitable for automatic and continuous analysis, and has been applied successfully to the analysis of quinine in pharmaceutical preparation.     

可溶性锰(IV)化学发光反应的研究

发现了在甲醛存在的条件下, 可溶性锰(IV)与30余种有机物和无机物的化学发光反应. 以头孢菌素类药物(头孢曲松钠、头孢唑啉钠、头孢拉定和头孢哌酮钠)为分析对象优化了可溶性锰(IV)-甲醛-头孢菌素类药物化学发光反应的条件, 建立了测定四种头孢菌素类药物的流动注射化学发光新方法, 并将建立的方法用于药物制剂中头孢菌素类药物的含量测定．同时, 对化学发光反应的机理进行了初步探讨.     

鲁米诺-锰(Ⅱ)-高碘酸钾化学发光体系测定痕量锰的研究

本文提出1种以三乙醇胺作活化剂,基于鲁米诺-锰(Ⅱ)-高碘酸钾化学发光体系高灵敏度、高选择性测定痕量锰的分析方法。检测限达8×10^-6μg/mLMn(Ⅱ)。Mn(Ⅱ)浓度在10^-5～0.1μg/mL范围内呈良好的线性关系。测定1.0×10^-3μg/mLMn(Ⅱ)的相对标准偏差小于±3％。应用于井水及人发样品中锰的测定,结果令人满意。     

Spectrophotometric simultaneous determination of manganese(II) and iron(II) in pharmaceutical by orthogonal signal correction-partial least squares

The simultaneous determination of manganese(II) and iron(II) mixtures by using spectrophotometric methods is a difficult problem in analytical chemistry, due to spectral interferences. By multivariate calibration methods, such as partial least squares (PLS), it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. Orthogonal signal correction (OSC) is a preprocessing technique used to remove the information unrelated to the target variables based on constrained principal component analysis. OSC is a suitable preprocessing method for partial least squares calibration of mixtures without loss of prediction capacity using spectrophotometric method. In this study, the calibration model is based on absorption spectra in the 450-600 nm range for 21 different mixtures of manganese(II) and iron(II). Calibration matrices were containing 0.05-1.2 and 0.1-2.3 microg mL(-1) Mn(II) and Fe(II), respectively. The RMSEP for manganese(II) and iron(II) with OSC and without OSC were 0.0316, 0.0291, and 0.0907, 0.115, respectively. This procedure allows the simultaneous determination of manganese(II) and iron(II) in synthetic and real matrix samples with good reliability of the determination.     

Development of a new flow-through bulk optode for the determination of manganese(III)

A flow-through bulk optode based on the use of 1-(2-pyridylazo)-2-naphthol (PAN) immobilized in a plasticized poly(vinyl chloride) membrane entrapped in a cellulose support, in conjuntion with the flow injection analysis technique, is proposed for the determination of manganese(II). The calibration graph obtained at 570 nm was linear in the range 0.27-27.5 mg L(-1) (5 x 10(-6)-5 x 10(-4) M) Mn(II) with a detection limit of 0.18 mg L(-1). The coefficients of variation of the sensor response for 5.5 mg L(-1) of Mn(II) were +/-0.22% for consecutive measurements (n = 10), +/-0.48% between days (n = 5) and +/-0.38% between different membranes (n = 6). The sensor was readily regenerated with the carrier acetic acid/acetate buffer of pH 4.5. The method was applied to the determination of manganese in steels, waters and lemon tree leaves.     

Determination of thallium in soils by flow-injection-differential pulse anodic stripping voltammetry

A relatively simple and quick method for the determination of thallium in soils is described. The method does not require any separation prior to determination. Total decomposition of the sample was performed in a teflon bomb. The interferences of iron, aluminum and manganese were removed by media exchange performed in a flow-injection measuring system, and the other interferences were removed by the use of the base electrolyte consisting of 0.15M EDTA and 0.1M ascorbic acid. The contents of thallium in the examined samples of soil were between 100 and 350 ppb.     

Kinetic determination of traces of manganese(II) by its catalytic effect on the autoxidation of 1,4-dihydroxy phthalimide dithiosemicarbazone

A kinetic method is described for the determination of trace amounts of manganese(II) based on its catalytic effect on the aerial oxidation of 1,4-dihydroxyphthalimide dithiosemicarbazone. The reaction is followed spectrophotometrically by measuring the rate of change in absorbance at 594 nm. The calibration graph (rate constant vs. manganese concentration) is linear in the range 10–90 ng Mn ml^-1. The preparation and properties of the reagent are described and the kinetic parameters of the reaction are reported. There are few interferences.     

Flow Injection Chemiluminescence Determination of Isoniazid Using On-Line Electrogenerated Manganese(III) as Oxidant

A novel flow injection chemiluminescence (CL) system for the determination of isoniazid has been proposed. It is based on the direct CL reaction of isoniazid and Mn(III) in sulfuric acid medium. The unstable Mn(III) was on-line electrogenerated by constant current electrolysis. The CL emission intensity was linear with isoniazid concentration in the range 0.1–10 μg/mL; the detection limit was 3.2 × 10⁻² μg/mL. The whole process could be completed in 1 min with a relative standard deviation of less than 5%. The proposed method is suitable for automatic and continuous analysis and has been applied successfully to the analysis of isoniazid in pharmaceutical preparation.     

Catalytic flow-injection determination of sub-ppb copper(II) using the redox reaction of cysteine with iron(III) in the presence of 2,4,6-tris(2-pyridyl)-1,3,5-triazine.

A kinetic-catalytic spectrophotometric flow-injection method was developed for the rapid and sensitive determination of trace amounts of copper(II). The method is based on the catalytic effect of copper(II) on the redox reaction of cysteine with iron(III). Iron(II) produced by the catalytic reaction reacts with 2,4,6-tris(2-pyridyl)-1,3,5-triazine (TPTZ) to form the iron(II)-TPTZ complex (lambda(max) = 593 nm). By measuring an absorbance of the complex, one could determine 0.05-8 ppb copper(II) with the relative standard deviations (n = 10) of 1.6%, 1.3%, and 0.8% for 0.5 ppb, 1 ppb, and 2 ppb copper(II), respectively. The limit of detection (S/N = 3) was 0.005 ppb. The sample throughput was 30 h(-1). The proposed method was successfully applied to the determination of copper in natural water and serum samples.     

Soluble manganese(IV) as a chemiluminescence reagent for the determination of opiate alkaloids, indoles and analytes of forensic interest

We present the results of our investigations into the use of soluble manganese(IV) as a chemiluminescence reagent, which include a significantly faster method of preparation and a study on the effect of formaldehyde and orthophosphoric acid concentration on signal intensity. Chemiluminescence detection was applied to the determination of 16 analytes, including opiate alkaloids, indoles and analytes of forensic interest, using flow injection analysis methodology. The soluble manganese(IV) reagent was less selective than either acidic potassium permanganate or tris(2,2′-bipyridyl)ruthenium(III) and therefore provided a more universal chemiluminescence detection system for HPLC. A broad spectral distribution with a maximum at 730 ± 5 nm was observed for the reaction between the soluble manganese(IV) and a range of analytes, as well as the background emission from the reaction with the formaldehyde enhancer. This spectral distribution matches that reported for chemiluminescence reactions with acidic potassium permanganate, where a manganese(II) emitting species was elucidated. This provides further evidence that the emission evoked in reactions with soluble manganese(IV) also emanates from a manganese(II) species, and not bimolecular singlet oxygen as suggested by previous authors.     

Flame atomic absorption spectrometric determination of trace amounts of manganese in alloys and biological samples after preconcentration with the ion pair of 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol and ammonium tetraphenylborate on microcrystalline naphthalene or by column method.

Manganese is quantitatively retained on 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP)-ammonium tetraphenylborate with microcrystalline naphthalene or by a column method in the pH range 7.5-10.5 from large volumes of aqueous solutions of various samples. After filtration, each solid mass consisting of the manganese complex and naphthalene was dissolved with 5 ml of dimethylformamide and the metal was determined by flame atomic absorption spectrometry. Manganese complex can alternatively be quantitatively adsorbed on ammonium tetraphenylborate-naphthalene adsorbent packed in a column and determined similarly. About 0.1 microgram of manganese can be concentrated in a column from 500 ml of aqueous sample, where its concentration is as low as 0.2 ppb. Eight replicate determinations of 1.0 ppm of manganese gave a mean absorbance of 0.224 with a relative standard deviation of 1.8%. The sensitivity for 1% absorption was 19 ppb. The interference of a large number of anions and cations has been studied and the optimized conditions developed were utilized for the trace determination of manganese in various standard samples.     

Determination of carbamazepine by chemiluminescence detection using chemically prepared tris(2,2'-bipyridine)ruthenium(III) as oxidant.

A new chemiluminescence method for the determination of carbamazepine (CBZ) has been developed. The method is based on the chemiluminescence produced in the reaction of tris(2,2'-bipyridine)ruthenium(III) and CBZ in an acidic medium. The chemiluminescence intensity was enhanced by organic solvents in the reaction system. Under the optimum experimental conditions, the calibration curve was linear over the range 4.0 x 10(-3)-8.6 x 10(-7) mol/L for CBZ. The detection limit (S/N = 3) was 2.5 x 10(-7) mol/L and the relative standard deviation of six replicate measurements was 2.6% for 4.0 x 10(-4) mol/L of CBZ. The possible reaction mechanism were also discussed. The chemiluminescence method was successfully applied to assay the CBZ contents in pharmaceutical tablets.     

Potentiometric flow injection determination of manganese(II) by using a hexacyanoferrate(III)-hexacyanoferrate(II) potential buffer

A highly sensitive potentiometric flow injection analysis method for the determination of manganese(II), utilizing a redox reaction with hexacyanoferrate(III) in near neutral media containing ammonium citrate is described. The analytical method is based on the detection of the change in potential of a flow-through type redox electrode detector, resulting from the composition change of an [Fe(CN)₆]³⁻-[Fe(CN)₆]⁴⁻ potential buffer solution. A linear relationship between the potential change (peak height) and the concentration of manganese(II) was found. Manganese(II) in a wide concentration range from 10⁻⁴ to 10⁻⁷ M could be determined by appropriately altering the concentration of the potential buffer from 10⁻³ to 10⁻⁵ M. The lower detection limit of manganese(II) was determined to be 1×10⁻⁷ M. The sampling rate and relative standard deviation were 20 h⁻¹ and 1.9% (n=8) for 6×10⁻⁶ M manganese(II), respectively. The proposed method was successfully applied to the determination of manganese(II) in actual soil samples obtained from tea fields. Analytical results obtained by the proposed method were in good agreement with those obtained by an atomic absorption spectrophotometric method.     

Efficient Generation of Chemiluminescence during the reduction of manganese(IV) ions with lactic acid

The kinetics and mechanism of chemiluminescence during the reduction of manganese(IV) ions with lactic acid in an H₂SO₄–AcOH medium are studied. Kinetic spectrophotometric measurements are used to determine the profiles of change in the concentrations of Mn(IV) and Mn(III) ions during the reaction. The results from kinetic spectrophotometric measurements are compared to the light yield kinetics. The quantum chemiluminescence and chemiexcitation yields reach record values.