Europium complexation by an aquatic fulvic acid - effects of competing ions

Effects of competing ions, Fe (2+)Fe (3+) and Al(3+), on Eu(3+) complexation with an aquatic fulvic acid (FA), have been investigated using an ion exchange technique. The influence of different concentrations (10(-6), 10(-4) M) of the competing ions on the distribution coefficient for Eu was measured, and the overall complex formation function, beta(ov), was resolved for the Eu systems with Fe and Al. All systems showed pH-dependent beta(ov)-functions. The presence of 10(-4) M concentration of competing ion reduced the resolved complex formation function (logbeta(ov)) for Eu complexation with fulvic acid by 0.6 and 0.4 log units at pH 5 for Fe and Al, respectively. this indicates that Fe has a more perturbing effect on Eu-FA complexation than Al. In similar competition studies Sr and Eu were found not to perturb each others complexation with fulvic acid, suggesting therefore that the two metals probably bind to different sites on the fulvic acid molecule.     

Use of electrospray mass spectrometry (ESI-MS) for the study of europium(III) complexation with bis(dialkyltriazinyl)pyridines and its implications in the design of new extracting agents

ESI mass spectrometry was used to investigate the europium complexation by tridentate ligands L identical with 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)-pyridines (DATP) that have shown unique separation properties of actinides(III) from lanthanides(III) in nitric acid solutions. Complexes of three ligands, namely methyl (DMTP), n-propyl (DnPTP), and iso-propyl (DiPTP), have been investigated in acidic solutions to check the aqueous-phase stability of Eu(L)(3)(3+) ions identified previously in the solid state. The data obtained show, first, the presence of stable Eu(L)(3)(3+) ions with DnPTP (log beta(3)(app) = 12.0 +/- 0.5) and DiPTP (log beta(3)(app) = 14.0 +/- 0.6) in methanol/water (1:1 v/v) solutions under pH range 2.8-4.6 and, second, a mechanism whereby alkyl moieties contribute to a self-assembling process leading to the formation of Eu(L)(3)(3+) ions. Other complexes such as Eu(L)(2)(3+) ions are only observed for DnPTP (log beta(2)(app) = 6.7 +/- 0.5) and DMTP (log beta(2)(app) = 6.3 +/- 0.1) and Eu(L)(3+) only for DMTP (log beta(1)(app) = 2.9 +/- 0.2). The log beta(n)(app) values for the Eu(L)(n)(3+) (n = 1-3) complexes were determined at pH 2.8. Better insight was given in this study concerning the role of the hydrophobic exterior of the ligands for the design of a new range of extracting agents.     

Uptake of cesium, strontium and europium by a poly(sodium acrylate-acrylic acid) hydrogel

The uptake of cesium, strontium and europium from dilute nitric acid solutions by a poly(sodium acrylate-acrylic acid) PAA hydrogel has been investigated. pH variations are consistent with cation exchange processes: COO(-), Na (+)H (+), COO(-), Na (+)M (m+) ( M (m+) = Cs (+)and Sr (2+)) and COOH Eu (3+). Saturation of the gel is achieved for metal/carboxylate ratios R = 0.5. The swelling ratios of gels loaded with metal cations are those of uncharged, shrunk gels (Sr, Eu) or of charged, swollen gels (Cs) in agreement with the formation of uncharged (COO)(2)Sr, (COO)(2)EuX (X = NO(3) or OH) type complexes and (COO(-), Cs(+)) ion pairs. The metal cations are extracted in the gels following the order of their affinities with carboxylic groups Eu(3+) > Sr(2+) > Cs(+). An increase of the ionic strength of the metal aqueous solution up to 0.5M NaNO(3) leads to slightly decrease the europium uptake by the PAA hydrogel, but 0.1M NaNO(3) is sufficient to prevent the Sr and Cs extractions.     

Europium ion catalyzed methanolysis of esters at neutral pH and ambient temperature. catalytic Involvement of Eu3+(CH3O-)(CH3OH)x

The Eu(3+)-promoted methanolysis of three esters, p-nitrophenyl acetate (1), phenyl acetate (2), and ethyl acetate (3) is reported, as well as the potentiometric titration of Eu(3+) in MeOH at various [Eu(SO(3)CF(3))(3)] (SO(3)CF(3) = OTf). The titration data are analyzed in terms of two ionizations corresponding to macroscopic and values, which are respectively defined as the values at which the [CH(3)O(-)]/[Eu(3+)] = 0.5 and 1.5. As a function of increasing [Eu(OTf)(3)], increases slightly due to a proposed Eu(3+)/(-)OTf ion pairing effect, which tends to reduce the acidity of the metal-coordinated CH(3)OH, while decreases due to the formation of Eu(3+) dimers and oligomers which stabilize the (Eu(3+)(CH(3)O(-))(2))(n)forms through bridging of the methoxides between two or more metal ions. For ester 1, a detailed kinetic analysis of the reaction rates as a function of both [Eu(OTf)(3)] and in buffered methanol reveals that the /second-order rate constant (k(2)) plot for the catalyzed reaction follows a bell-shaped profile, suggesting that the active form is a Eu(3+)(CH(3)O(-)) monomer with a kinetic of 6.33 +/- 0.06 for formation and a of 8.02 +/- 0.10 for its conversion into the inactive (Eu(3+)(CH(3)O(-))(2))(n)oligomeric form. At higher values, plots of k(obs) vs [Eu(OTf)(3)] are linear at low metal concentration and plateau at higher metal concentration due to the formation of inactive higher order aggregates. The Eu(3+)(CH(3)O(-)) catalysis of the methanolysis of esters 1, 2, and 3 is substantial. Solutions of 10(-2) M of the catalyst at 7.12 accelerate the reaction relative to the methoxide reaction at that by 8 530 000-, 195 000 000- and 7 813 000-fold, respectively.     

Formation and dissociation kinetics of triaza-crown-alkanoic acid complexes of transition metal(II) and lanthanide (III)

The formation and dissociation rates of some transition metal(II) and lanthanide(III) complexes of the 1,7,13-triaza-4,10,16-trioxacyclooctadecane N',N',N'-triacetic acid (1) and 1,7,13-triaza-4,10,16-trioxacyclooctadecane-N',N',N'- trimethylacetic acid (2) have been measured by the use of stopped-flow and conventional spectrophotometry. Experimental observations were made at 25.0 +/- 0.1 degrees C and at an ionic strength of 0.10 M KCl. The complexation of Zn(2+) and Cu(2+) ions with 1 and 2 proceeds through the formation of an intermediate complex (MH(3)L(+) *) in which the metal ion is incompletely coordinated. This may then lead to a final product in the rate-determining step. Between pH 4.68 and 5.55, the diprotonated (H(2)L(-)) form is revealed to be a kinetically active species despite its low concentration. The stability constants (log K (MH (3)L (+) *)) and specific base-catalyzed rate constants (k(OH)) of intermediate complexes have been determined from the kinetic data. The dissociation reactions of 1 and 2 complexes of Co(2+), Ni(2+), Zn(2+), Ce(3+), Eu(3+) and Yb(3+) were investigated with Cu(2+) ions as a scavenger in acetate buffer. All complexes exhibit acid-independent and acid-catalyzed contributions. The buffer and Cu(2+) concentration dependence on the dissociation rate has also been investigated. The metal and ligand effects on the dissociation rate of some transition metal(II) and lanthanide(III) complexes are discussed in terms of the ionic radius of the metal ions, the side-pendant arms and the rigidity of the ligands.     

On the complex formation equilibria between dioxouranium(VI) and sulfate ions

The complexation equilibria between UO2(2+) and SO4(2-) ions have been studied at 25 degrees C in the ionic medium 3 M NaClO4 by potentiometry, by spectrophotometry and by solubility measurements of UO2(IO3)2. The potentiometric investigation was carried out with the Hg-Hg2SO4(s)-SO4(2-) half-cell and glass electrode in the sulfate concentration range 0.005 to 0.07 M. The optical absorbances in the UV-visible region and the solubility data cover the ligand concentration range 0.005 to 0.3 M. The data could be explained by assuming the complexes and equilibrium constants [Table: see text]. The constants in the infinite dilution reference state, log beta1o = 3.08 +/- 0.15 and log beta2o = 4.28 +/- 0.15, estimated by assuming the validity of the specific interaction theory, are practically coincident with literature data.     

Novel yellow-emitting Sr8MgLn(PO4)7:Eu2+ (Ln=Y, La) phosphors for applications in white LEDs with excellent color rendering index

Eu(2+)-activated Sr(8)MgY(PO(4))(7) and Sr(8)MgLa(PO(4))(7) yellow-emitting phosphors were successfully synthesized by solid-state reactions for applications in excellent color rendering index white light-emitting diodes (LEDs). The excitation and reflectance spectra of these phosphors show broad band excitation and absorption in the 250-450 nm near-ultraviolet region, which is ascribed to the 4f(7) → 4f(6)5d(1) transitions of Eu(2+). Therefore, these phosphors meet the application requirements for near-UV LED chips. Upon excitation at 400 nm, the Sr(8)MgY(PO(4))(7):Eu(2+) and Sr(8)MgLa(PO(4))(7):Eu(2+) phosphors exhibit strong yellow emissions centered at 518, 610, and 611 nm with better thermal stability than (Ba,Sr)(2)SiO(4) (570 nm) commodity phosphors. The composition-optimized concentrations of Eu(2+) in Sr(8)MgLa(PO(4))(7):Eu(2+) and Sr(8)MgY(PO(4))(7):Eu(2+) phosphors were determined to be 0.01 and 0.03 mol, respectively. A warm white-light near-UV LED was fabricated using a near-UV 400 nm chip pumped by a phosphor blend of blue-emitting BaMgAl(10)O(17):Eu(2+) and yellow-emitting Sr(8)MgY(PO(4))(7):0.01Eu(2+) or Sr(8)MgLa(PO(4))(7):0.03Eu(2+), driven by a 350 mA current. The Sr(8)MgY(PO(4))(7):0.01Eu(2+) and Sr(8)MgLa(PO(4))(7):0.03Eu(2+) containing LEDs produced a white light with Commission International de I'Eclairage (CIE) chromaticity coordinates of (0.348, 0.357) and (0.365, 0.328), warm correlated color temperatures of 4705 and 4100 K, and excellent color rendering indices of 95.375 and 91.75, respectively.     

Thermodynamics of complexation of magnesium and calcium ions with dichloromethylenediphosphonate

Thermodynamic parameters for the complexation of CA(2+) and Mg(2+) ions by dichloromethylenediphosphonate (clodronate) ligand were obtained by potentiometric and calorimetric techniques. The measurements were conducted at an ionic strength of 0.10M [(CH(3))(4)NCl]) and at 25 degrees C. The potentiometric data were consistent with a model involving the presence of ML(2-)MHL(-) and M(2)L species (L = tetranegative clodronate anion). The enthalpies of formation of the ML(2-) and MHL(-) complexes were obtained from calorimetric data. Attempts to determine the enthalpies of formation of the M(2)L species were unsuccessful due to the limited solubilities of these species.     

Formation of Metallo-6(A)-((2-(bis(2-aminoethyl)amino)ethyl)amino)-6(A)-deoxy-beta-cyclodextrins and Their Complexation of Tryptophan in Aqueous Solution

A pH titration study shows that 6(A)-((2-(bis(2-aminoethyl)amino)ethyl)amino)-6(A)-deoxy-beta-cyclodextrin (betaCDtren) forms binary metallocyclodextrins, [M(betaCDtren)](2+), for which log(K/dm(3) mol(-)(1)) = 11.65 +/- 0.06, 17.29 +/- 0.05, and 12.25 +/- 0.03, respectively, when M(2+) = Ni(2+), Cu(2+), and Zn(2+), where K is the stability constant in aqueous solution at 298.2 K and I = 0.10 mol dm(-)(3) (NaClO(4)). The ternary metallocyclodextrins [M(betaCDtren)Trp](+), where Trp(-) is the tryptophan anion, are characterized by log(K/dm(3) mol(-)(1)) = 8.2 +/- 0.2 and 8.1 +/- 0.2, 9.5 +/- 0.3 and 9.4 +/- 0.2, and 8.1 +/- 0.1 and 8.3 +/- 0.1, respectively, where the first and second values represent the stepwise stability constants for the complexation of (R)- and (S)-Trp(-), respectively, when M(2+) = Ni(2+), Cu(2+), and Zn(2+). From comparisons of stabilities and UV-visible spectra, the binary and ternary metallocyclodextrins appear to be six-coordinate when M(2+) = Ni(2+) and Zn(2+) and five-coordinate when M(2+) = Cu(2+). The factors affecting the stoichiometries and stabilities of the metallocyclodextrins, are discussed and comparisons are made with related systems.     

Diazacoronand linked beta-cyclodextrin dimer complexes of Brilliant Yellow tetraanion and their sodium(I) analogues

Complexation of the Brilliant Yellow tetraanion, 3(4-), by two new diazacoronand linked beta-cyclodextrin (beta CD) dimers 4,13-bis(2-(6A-deoxy-beta-cyclodextrin-6A-yl)aminooctylamidomethyl- and 4,13-bis(8-(6A-deoxy-beta-cyclodextrin-6A-yl)aminooctylamidomethyl)-4,13- diaza-1,7,10-trioxacyclopentadecane, 1 and 2, respectively, has been studied in aqueous solution. UV-visible spectrophotometric studies at 298.2 K, pH 10.0 and I = 0.10 mol dm-3 (NEt4ClO4) yielded complexation constants for the complexes 1 x 3(4-) and 2 x 3(4-), K1 = (1.08 +/- 0.01) x 10(5) and (6.21 +/- 0.08) x 10(3) dm3 mol-1, respectively. Similar studies at 298.2 K, pH 10.0 and I = 0.10 mol dm-3 (NaClO4) yielded K3 = (4.63 +/- 0.09) x 10(5) and (3.38 +/- 0.05) x 10(4) dm3 mol-1 for the complexation of 3(4-) by Na+ x 1 and Na+ x 2 to give Na+ x 1 x 3(4-) and Na+ x 2 x 3(4-), respectively. Potentiometric studies of the complexation of Na+ by 1 and 2 by the diazacoronand component of the linkers to give Na+ x 1 and Na+ x 2 yielded K2 = (2.00 +/- 0.05) x 10(3) and (1.8 +/- 0.05) x 10(3) dm3 mol-1, respectively, at 298.2 K and I = 0.10 mol dm-3(NEt4ClO4). For complexation of Na+ by 1 x 3(4-) and 2 x 3(4-) to give Na+ x 1 x 3(4-) and Na+ x 2 x 3(4-) K2K3/K1 = K4 = 8.6 x 10(2) and 9.8 x 10(3) dm3 mol-1, respectively. The pKaS of 1H4(4+) are 7.63 +/- 0.01, 6.84 +/- 0.02, 5.51 +/- 0.04 and 4.98 +/- 0.03, and those of 2H4(4+) are 8.67 +/- 0.02, 8.11 +/- 0.02, 6.06 +/- 0.02 and 5.14 +/- 0.05. The larger magnitude of K1 for 1 by comparison with K1 for 2 is attributed to the octamethylene linkers of 2 competing with 3(4-) for occupancy of the annuli of the beta CD entities while the competitive ability of the dimethylene linkers of 1 is less. A similar argument applies to the relative magnitudes of K3 for Na+ x 1 and Na+ x 2. Increased electrostatic attraction probably accounts for K3 > K1 for Na+ x 1 x 3(4-) and 1 x 3(4-) and for Na+ x 2 x 3(4-) and 2 x 3(4-). The lesser magnitudes of K2 and K4 for Na+ x 1 and Na+ x 1 x 3(4-) compared with those for Na+ x 2 and Na+ x 2 x 3(4-) are attributed to the octamethylene linkers of 2 producing a more hydrophobic environment for the diazacoronand than that produced by the dimethylene linkers of 1. 1H NMR spectroscopic studies and the syntheses of 1 and 2 are described.     

Surface complexation modeling of Sr(II) and Eu(III) adsorption onto oxidized multiwall carbon nanotubes

Acid-base titrations of oxidized multiwall carbon nanotubes (MWCNTs), Sr(II) and Eu(III) adsorptions onto oxidized MWCNTs were conducted to investigate the surface charge characteristics of oxidized MWCNTs and the surface complexation interactions between Sr(II)/Eu(III) and oxidized MWCNTs. The results suggested that Sr(II) and Eu(III) adsorptions onto oxidized MWCNTs increased with increasing pH, and decreased with increasing ionic strength, and the affinity of oxidized MWCNTs for Eu(III) was much higher than that for Sr(II). The diffuse layer model (DLM) fitted the experimental data of Sr(II) and Eu(III) adsorptions well with the aid of FITEQL 3.2.     

Adsorption of Eu(III) on titanate nanotubes studied by a combination of batch and EXAFS technique

The effects of pH,contact time and natural organic ligands on radionuclide Eu(Ⅲ) adsorption and mechanism on titanate nanotubes(TNTs) are studied by a combination of batch and extended X-ray absorption fine structure(EXAFS) techniques.Macroscopic measurements show that the adsorption is ionic strength dependent at pH < 6.0,but ionic strength independent at pH > 6.0.The presence of humic acid(HA) /fulvic acid(FA) increases Eu(Ⅲ) adsorption on TNTs at low pH,but reduces Eu(Ⅲ) adsorption at high pH.The results of EXAFS analysis indicate that Eu(Ⅲ) adsorption on TNTs is dominated by outer-sphere surface complexation at pH < 6.0,whereas by inner-sphere surface complexation at pH > 6.0.At pH < 6.0,Eu(Ⅲ) consists of ～ 9 O atoms at REu?O ≈ 2.40  in the first coordination sphere,and a decrease in NEu-O with increasing pH indicates the introduction of more asymmetry in the first sphere of adsorbed Eu(Ⅲ).At long contact time or high pH values,the Eu(Ⅲ) consists of ～2 Eu at REu-Eu ≈ 3.60  and ～ 1 Ti at REu-Ti ≈ 4.40 ,indicating the formation of inner-sphere surface complexation,surface precipitation or surface polymers.Surface adsorbed HA/FA on TNTs modifies the species of adsorbed Eu(Ⅲ) as well as the local atomic structures of adsorbed Eu(Ⅲ) on HA/FA-TNT hybrids.Adsorbed Eu(Ⅲ) on HA/FA-TNT hybrids forms both ligand-bridging ternary surface complexes(Eu-HA/FA-TNTs) as well as surface complexes in which Eu(Ⅲ) remains directly bound to TNT surface hydroxyl groups(i.e.,binary Eu-TNTs or Eu-bridging ternary surface complexes(HA/FA-Eu-TNTs)).The findings in this work are important to describe Eu(Ⅲ) interaction with nanomaterials at molecular level and will help to improve the understanding of Eu(Ⅲ) physicochemical behavior in the natural environment.     

Dioxouranium(VI)-carboxylate complexes. Speciation of UO2(2+)-1,2,3-propanetricarboxylate system in NaCl(aq) at different ionic strengths and at t=25 degrees C

The formation constants of dioxouranium(VI)-1,2,3-propanetricarboxylate [tricarballylate (3-), TCA] complexes were determined in NaCl aqueous solutions at 0 < or = I/mol L(-1) < or = 1.0 and t=25 degrees C, by potentiometry, ISE-[H+] glass electrode. The speciation model obtained at each ionic strength includes the following species: ML-, MLH0, ML2(4-) and ML2H3- (M = UO2(2+) and L = TCA). The dependence on ionic strength of protonation constants of 1,2,3-propanetricarboxylate and of the metal-ligand complexes was modeled by the SIT (Specific ion Interaction Theory) approach and by the Pitzer equations. The formation constants at infinite dilution are [for the generic equilibrium p UO22+ + q (L3-) + r H+ = (UO2(2+))p(L)qHr(2p-3q+r); betapqr]: log beta110 = 6.222 +/- 0.030, log beta111 = 11.251 +/- 0.009, log beta121 = 7.75 +/- 0.02, log beta121 = 14.33 +/- 0.06. The sequestering ability of 1,2,3-propanetricarboxylate towards UO2(2+) was quantified by using a sigmoid Boltzman type equation.     

Determination of borate ion-pair stability constants by potentiometry and non-approximative linearization of titration data

Borate anions, B(OH)(-)(4), are known to associate with alkali and alkaline-earth metal cations in sea-water. The borate cation ion-pairs are of the general form MB(OH)((n-1)+)(4), where M(n+) is the cation. In this work, the cation borate stability constants (K*(MB)) have been evaluated for Na(+), Li(+), Mg(2+), Ca(2+) and Sr(2+) where K*(MB) = [MB(OH(4))((n-1)+)]/[M(n+)][B(OH)(-)(4)]. The K*(MB) values were obtained from values found for the stability constant of boric acid (K*(B)) in various electrolyte media at 25 degrees and an ionic strength of 0.7. Acid-base potentiometric titrations were performed in the electrolyte media with a standard Pt/H(2) electrode and a junctionless Ag/AgCl reference electrode to monitor the emf. A non-approximative equation was used to linearize the titration data. The values obtained were: K*(Lib) = 0.89 +/- 0.02, K*(NaB) = 0.44 +/- 0.01, K*(MgB) = 13.6 +/- 0.7, K*(CaB) = 11.4 +/- 0.15, K*(SrB) = 3.47 +/- 0.06. The values for K*(MB) correlate with the charge-density parameter z(2)/(r + 0.85), where r is the radius of the cation. The speciation of boron in sea-water was predicted from the K*(MB), data for the major cations present.     

Europium(III) interaction with a polyaza-aromatic extractant studied by time-resolved laser-induced luminescence: a thermodynamical approach

The 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridines (DATPs) belong to a new family of extracting agents recently developed in the framework of nuclear fuel reprocessing. These molecules exhibit exceptional properties to separate actinides(III) from lanthanides(III) in nitric acid solutions. In a previous work, the use of electrospray ionization mass spectrometry (ESI-MS) provided data such as stoichiometries and conditional stability constants of various DATP complexes with europium and evidenced the unusual capability of DiPTP [bis(di-iso-propyltriazinyl)pyridine] ligand to form 1:3 complexes in nitric acid solution. This latter result has then been further investigated by considering DiPTP complexation features with the complete lanthanide family. Moreover, a complementary study of equilibria in solution with a non intrusive technique such as time-resolved laser-induced luminescence (TRLIL) seemed quite promising to determine thermochemical data such as enthalpy and entropy variations associated with the complexation reaction between Eu(III) and DiPTP. Furthermore, this TRLIL study may also allow ensuring that the observations made on mass spectra actually reflected the equilibrium in solution and not an intermediate state between liquid phase and gaseous phase. The investigation of europium(III) complexation with DiPTP by TRLIL described in this paper first led to highlight the exclusive formation of a 1:3 complex between europium(III) and the DiPTP ligand, specificity already pointed out by ESI-MS. Two different calculation methods, using either luminescence spectra and luminescence decay curves, have then been used to measure the conditional stability constant of the [Eu(DiPTP)(3)](3+) complex. Both methods gave similar results (log beta3(app)= 14.3 +/- 0.6 at pH 2.8) in good agreement with the one previously reported in ESI-MS studies (log beta3(app)= 14.0 +/- 0.6 at pH 2.8). Moreover, while considering the influence of temperature on the value of the stability constant, it was possible to estimate the enthalpy (DeltaH(beta3) = -29 +/- 3 kJ mol(-1) at pH 2.8) and entropy variations (DeltaS(beta3) = 173 +/- 10 J K(-1) mol(-1) at pH 2.8) associated with the [Eu(DiPTP)(3)](3+) complex formation.     

The acidic constants of 2-hydroxybenzohydroxamic acid in NaClO4 solutions at 25 degrees C

The protolysis equilibria of 2-hydroxybenzohydroxamic acid, H2SAX, have been studied at 25 degrees C in different ionic media by potentiometric titration with a glass electrode. The media were 0.513, 1.05, 2.21 and 3.5 mol/kg NaClO4. The constants beta(-p)(H2SAX<==>H(2-p)SAX(-p)+pH+), combined with salting effects of NaClO4 on H2SAX deduced from solubility determinations, were processed by the specific interaction theory, SIT, to give equilibrium constants at infinite dilution, log beta(-1)(o) = -7.655 +/- 0.013 and log beta(-2)(o) = -17.94 +/- 0.04, as well as specific interaction coefficients b(HSAX-,Na+) = 0.12 +/- 0.01 and b(SAX2-,Na+) = 0.17 +/- 0.02, molal(-1).     

静态法和EXAFS技术研究Eu(III)在钛酸纳米管上的吸附行为和微观机制

结合静态实验和X射线吸收精细结构谱学(EXAFS)技术研究了pH、时间、有机配体等环境因素对放射性核素Eu(III)在钛酸纳米管上的吸附行为和微观机制的影响.宏观实验结果表明:Eu(III)在钛酸纳米管上的吸附在pH<6.0条件下受离子强度影响,而在pH>6.0条件下不受离子强度影响;腐殖酸HA/FA在低pH条件下可以促进Eu(III)在钛酸纳米管上的吸附,而在高pH条件下抑制Eu(III)在钛酸纳米管上的吸附.EXAFS微观分析结果表明:在pH<6.0条件下,吸附属于外层吸附机理;在pH>6.0条件下,吸附属于内层吸附机理.pH<6.0时,中心原子Eu周围只有Eu-O一个配位层,其平均键长为2.40,配位数在9左右;随着pH逐渐升高,第一配位层的配位数下降,表明吸附Eu原子配位的对称性下降.当吸附时间延长或pH升高,吸附原子Eu周围出现了Eu-Eu和Eu-Ti第二配位层,其平均键长分别为3.60和4.40,配位数分别在2或1左右,表明形成了内层吸附产物或表面沉淀或表面多聚体.腐殖酸HA/FA的存在,可以改变Eu(III)在钛酸纳米管表面的吸附形态和微观原子结构,Eu(III)不仅可以与钛酸纳米管的表面羟基直接键合形成二元表面复合物(Eu-TNTs),还可以通过HA/FA的桥连作用形成三元表面复合物(HA/FA-Eu-TNTs).这些研究结果对于评估放射性核素Eu(III)与纳米材料在分子水平上的作用机理及分析Eu(III)在环境中的物理化学行为具有重要的意义.     

Pu(VI) hydrolysis: further evidence for a dimeric plutonyl hydroxide and contrasts with U(VI) chemistry

A significant fraction of plutonium that is soluble in environmental waters and other aqueous solutions can be present as complexes of plutonyl, PuO2(2+). Few thermodynamic data are available for this ion, representing a problematic gap in plutonium chemistry and in the forecasting of radionuclide behavior under contamination and nuclear repository conditions. To address this need and more accurately determine the stoichiometry and stability of the basic hydrolytic products, we completed complimentary potentiometric and spectrophotometric studies of plutonium(VI) hydrolysis over the concentration range of 10(-2) to 10(-5) M Pu(VI). Dinuclear hydroxide species (PuO2)2(OH)2(2+) and (PuO2)2(OH)4(0)(aq) with hydrolysis constants log beta(2,2) = -7.79 +/- 0.20 and log beta(4,2) = -19.3 +/- 0.5 are indicated in all experiments of millimolar Pu(VI), 0.10 M NaNO3 solutions at 25 degrees C. At lower Pu(VI) concentrations, at and below 10(-4) M, the monomeric species PuO2OH+ and PuO2(OH)2(0)(aq) form with hydrolysis constants of log beta(1,1) = -5.76 +/- 0.07 and log beta(2,1) = -11.69 +/- 0.05, respectively. Distinct optical absorbance bands at 842 and 845 nm are reported for the mononuclear and dinuclear first hydrolysis species. Standard hydrolysis constants at zero ionic strength were calculated from the experimentally determined constants using the specific ion interaction theory. The Pu(VI) hydrolysis species and constants are compared with results from previous studies for plutonium and uranium. Major differences between uranyl and plutonyl hydrolysis are described.     

Studies of polyfunctional O-ligands: Formation and stability of Mg(2+) and Ca(2+) complexes of 1,2,4,5-benzenetetracarboxylic acid in aqueous solution at 25 degrees

The stabilities of the Ca(2+) and Mg(2+) complexes with 1,2,4,5-benzenetetracarboxylic acid (pyromellitic acid) were studied potentiometrically, at 25 degrees . The species ML, MHL, MH(2)L, and M(2)L [L = pyromellitate(4-); M = Ca(2+), Mg(2+)] were found to be present in solution (for Mg(2+) the species MH(3)L was also found). The dependence of the formation constants on ionic strength, and the stability trends of the Ca(2+) and Mg(2+) complexes with carboxylate ligands, are discussed.     

MTi(0.7)Mo(0.3)Mo(5)O(10) (M = SR, Eu), first evidence of mono- and bicapped bioctahedral Mo(11) and Mo(12) clusters: synthesis, crystal structures, and physical properties

The novel quaternary reduced molybdenum oxides MTi(0.7)Mo(0.3)Mo(5)O(10) (M = Sr, Eu) have been synthesized by solid-state reaction at 1400 degrees C for 48 h in sealed molybdenum crucibles. Their crystal structures were determined on single crystals by X-ray diffraction. Both compounds crystallize in the orthorhombic space group Pbca with 8 formula units per cell and the following lattice parameters: a(Sr) = 9.1085 (7), b(Sr) = 11.418 (1), and c(Sr) = 15.092 (3) A; a(Eu) = 9.1069 (7), b(Eu) = 11.421 (2), and c(Eu) = 15.075 (1) A. The Mo network is dominated by bioctahedral Mo(10) clusters, which coexist randomly with Mo(11) and Mo(12) clusters (monocapped and bicapped Mo(10) clusters). The Mo-Mo distances within the clusters range from 2.62 to 2.92 A and the Mo-O distances from 1.99 to 2.17 A as usually observed in the reduced molybdenum oxides. The Sr(2+) and Eu(2+) ions occupy large cavities, which result from the fusion of two cubooctahedra and thus are surrounded by 11 oxygen atoms. The M-O distances range from 2.50 to 3.23 A for the Sr compound and from 2.49 to 3.24 A for the Eu analogue. Single-crystal resistivity measurements indicate that both materials are poor metals with transitions to semiconducting states below 50 and 40 K and room temperature resistivity values of 9 x 10(-3) and 5 x 10(-3) Omega.cm for the Sr and Eu compounds, respectively. The magnetic susceptibility data indicate paramagnetic behavior due to the Eu(2+) moment at high temperatures for the Eu compound and do not reveal the existence of localized moments on the Mo and Ti sublattice in the Sr compound. An XPS study clearly suggests that the isolated Ti ions are tetravalent. Theoretical considerations preclude the existence of heterometallic Mo-Ti clusters.