Poly(vinyl chloride) membrane cesium ion-selective electrodes based on lipophilic calix[6]arene tetraester derivatives

New lipophilic tetraesters of calix[6]arene and calix[6]diquinone are investigated as cesium ion-selective ionophores in poly(vinyl chloride) membrane electrodes. For an ion-selective electrode based on calix[6]arene tetraester I, the linear response is 1x10(-6)-1x10(-1) M of Cs(+) concentrations. The selectivity coefficients for cesium ion over alkali, alkaline earth and ammonium ions are determined. The detection limit (log a (Cs (+))=-6.31) and the selectivity coefficient (log k (Cs (+),Rb (+))(pot )=-1.88) are obtained for polymeric membrane electrode containing calix[6]arene tetraester I.     

Calix[4]Arenes in the partial cone conformation as ionophores in silver ion-selective electrodes

Two calix[4]arene derivatives, in the partial cone conformation, with sulfur-containing functionalities, were tested as neutral carrier ionophores in potentiometric silver-selective electrodes of conventional membrane and membrane-coated glassy carbon electrode types. Comparison with a calix[4]arene in the cone conformation was made. The membranes were prepared using either 2-nitrophenyl octyl ether or bis(ethylhexyl)sebacate as plasticizers and potassium tetrakis(p-chlorophenyl)borate as the lipophilic salt in a poly(vinyl chloride) matrix. Both calix[4]arenes yielded electrodes of good sensitivity (approx. 47 mV dec⁻¹) in the range 10⁻⁴–10⁻¹ M and excellent selectivity [log K_Ag,_MH+ < −1.5] of transition, alkali and heavy metal cations, including sodium, mercury(II) and lead(II) cations. Temperature effects and reproducibility of response were determined and the interfering effects of mercury(II) and lead (II) ions on the membranes were noted. The partial cone conformation allows improved selectivity over certain cations relative to calix[4]arenes in the cone conformation.     

Homooxacalix[3]arene Derivatives as Ionophores for Serotonin‐Selective Membrane Electrodes

Homooxacalix[3]arene derivatives are effective ionophores for constructing serotonin‐selective membrane electrodes. An electrode based on one of the derivatives, tris(methoxyphenylpropyloxy)hexahomooxacalix[3]arene‐triethyl ether, with potassium tetrakis(p‐chlorophenyl)borate (20 mol% relative to the ionophore) as an ionic additive and bis(2‐ethylhexyl) sebacate as a solvent mediator in a poly(vinyl chloride) membrane matrix, displayed much better selectivity for serotonin than for various organic ammonium ions and inorganic cations. The electrode exhibited a near‐Nernstian response to serotonin in the concentration range of 2×10^?4 to 1×10^?2 M with a slope of 56.4 mV per concentration decade in physiological saline containing 150 mM NaCl and 10 mM Na₂HPO₄/NaH₂PO₄ (pH 7.4). The limit of the detection was 8×10^?5 M. The selectivity pattern of this electrode was quite different from that of an electrode using calix[6]arene‐hexaacetic acid hexaethyl ester, a well‐known ionophore for primary organic ammonium ions, which did not induce an enhanced response to serotonin. The developed electrode was used for the active loading of serotonin in liposomes induced by transmembrane pH gradients.     

Cesium-ion selective electrodes based on calix[4]arene dibenzocrown ethers

Four calix[4]arene dibenzocrown ether compounds have been prepared and evaluated as Cs(+)-selective ligands in solvent polymeric membrane electrodes. The ionophores include 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-6 1, 25,27-bis(1-alkyloxy)calix[4]arene dibenzocrown-7s 2 and 3, and 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-8 4. For an ion-selective electrode (ISE) based on 1, the linear response concentration range is 1x10(-1) to 1x10(-6) M of Cs(+). Potentiometric selectivities of ISEs based on 1-4 for Cs(+) over other alkali metal cations, alkaline earth metal cations, and NH(4)(+) have been assessed. For 1-ISE, a remarkably high Cs(+)/Na(+) selectivity was observed, the selectivity coefficient (K(Cs,Na)(Pot)) being ca. 10(-5). As the size of crown ether ring is enlarged from crown-6 (1) to crown-7 (2 and 3) to crown-8 (4), the Cs(+) selectivity over other alkali metal cations, such as Na(+) and K(+), is reduced successively. Effects of membrane composition and pH in the aqueous solution upon the electrode properties are also discussed.     

Calcium-selective electrode based on a calix[4]arene tetraphosphine oxide

A new ligand capable of producing calcium-selective electrodes with excellent characteristics is presented. The ligand (1) is a calix[4]arene bearing phosphine oxide ligating groups on the lower rim and this is the first report that such ligands can discriminate in favour of calcium ions against magnesium ions and the alkali metal ions. This calcium selectivity is in complete contrast to the behaviour of the well-known calix[4]arene tetraester derivatives (such as 2) which are selective for sodium against other alkali metal ions and group II ions. Electrodes based on PVC membranes incorporating ligand 1 display almost nernstian slopes and excellent selectivity against common interferants, including magnesium (log K(Ca,Mg)(pot)). The electrodes have demonstrated effective lifetimes of at least 7 weeks (duration of the study) and very fast response times.     

New polymeric membrane cadmium(II)-selective electrodes using tripodal amine based ionophores

Fabrication of PVC membrane electrodes incorporating selective neutral carriers for Cd(2+) was reported. The ionophores were designed to have different topologies, donor atoms and lipophilicity by attaching tripodal amine (TPA) units to the lipophilic anthracene (ionophore I) and p-tert-butylcalix[4]arene (ionophores II, III and IV). The synthesized ionophores were incorporated to the plasticized PVC membranes to prepare Cd(II) ion selective electrodes (ISEs). The membrane electrodes were optimized by changing types and amounts of ionic sites and plasticizers. The selectivity of the membranes fabricated from the synthesized ionophores was evaluated, the relationship between structures of ionophores and membrane characteristics were explored. The ionophore IV which composed of two opposites TPA units on the calix[4]arene compartment showed the best selectivity toward Cd(2+). The best membrane electrode was fabricated from ionophore IV (10.2 mmol kg(-1)) with KTpClPB (50.1 mol% related to the ionophore) as an ion exchanger incorporated in the DOS plasticized PVC membrane (1:2; PVC:DOS). The Cd-ISE fabricated from ionophore IV exhibited good properties with a Nernstian response of 29.4±0.6 mV decade(-1) of activity for Cd(2+) ions and a working concentration range of 1.6×10(-6)-1.0×10(-2)M. The sensor has a fast response time of 10s and can be used for at least 1 week without any divergence in potential. The electrode can be used in the pH range of 6.0-9.0. The proposed electrodes using ionophores III and IV were employed as a probe for determining Cd(2+) from the oxidation of CdS QDs solution and the real treatment waste water sample with excellent results.     

含酰胺和席夫碱单元的杯[4]芳烃衍生物的合成与配合性能

杯[4]-1,3-二乙酸乙酯衍生物1与水合肼反应生成杯[4]芳烃酰肼衍生物2, 然后进一步与相应的芳醛反应, 高产率地合成了三个新型的含酰胺和席夫碱单元的杯[4]芳烃衍生物3a～3c和一例新型杯[4]冠醚4. 阳离子萃取实验表明新型杯芳烃衍生物比只含有酰胺基或席夫碱基的杯芳烃衍生物有更强的软金属离子配合性能, 杯[4]冠醚4还对Ag^＋有较好的选择性萃取能力.     

Calixarene-based potentiometric ion-selective electrodes for silver

Four lipophilic sulphur and/or nitrogen containing calixarene derivatives have been tested as ionophores in Ag(I)-selective poly (vinyl chloride) membrane electrodes. All gave acceptable linear responses with one giving a response of 50 mV/dec in the Ag(I) ion activity range 10(-4)-10(-1)M and high selectivity towards other transition metals and sodium and potassium ions. This ionophore was also tested as a membrane coated glassy-carbon electrode where the sensitivity and selectivity of the conventional membrane electrode was found to be repeated. The latter electrode was then used in potentiometric titrations of halide ions with silver nitrate.     

Rigid versus flexible: how important is ligand "preorganization" for metal ion recognition by lower rim-functionalized calix[4]arenes?

For an assessment of the outcomes from use of an appropriately "preorganized" calixarene-based ionophore versus its conformationally mobile prototype, solvent extraction propensities of flexible calix[4]arene di-[N-(X-sulfonyl)carboxamides] for alkali, alkaline earth metal cations, Pb2+, Ag+ and Hg2+ are compared with those for seven new rigid analogs fixed in the cone, partial cone and 1,3-alternate conformations. For each of the metal ions, the preferred calix[4]arene conformation was determined from the NMR spectra for the metal salt of the flexible ligand. Except for Ag+, flexible calix[4]arene di-[N-(X-sulfonyl)carboxamides] were found to provide greater metal ion extraction efficiency and better selectivity than the corresponding "preorganized" ionophores.     

Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes

Potentiometric ion sensors have been prepared by galvanostatic electrosynthesis of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with p-sulfonated calix[4]arene (C[4]S) and p-methylsulfonated calix[4]resorcarenes (R_n[4]S) with alkyl substituents of different chain length (R₁=CH₃; R₂=C₂H₅; R₃=C₆H₁₃). The bowl-shape of these doping ions makes them suitable as ionic recognition sites, and their bulky character is expected to prevent them from leaching out of the conducting polymer membrane. For comparison, sensors based on PEDOT doped with poly(styrene sulfonate) (PSS) and poly(vinyl sulfonate) (PVS) were also constructed. The resulting GC/PEDOT electrodes were conditioned in 0.01 mol L^–1 AgNO₃ and their performance as Ag⁺ ion-selective electrodes (ISEs) studied. Results reveal that selectivity and lifetime of the electrodes is affected by the doping anion structure, although all electrodes show selectivity towards Ag⁺ ions. Interaction of Ag⁺ with sulfur atoms present in the conducting polymer backbone is considered to be the main reason for this behavior. A second set of electrodes was constructed and conditioned in 0.1 mol L^–1 KCl. These electrodes were tested in chloride solutions of quaternary ammonium cations, showing that C[4]S and R₂[4]S exhibit significant sensitivity towards pyridinium.Dedicated to Professor György Horányi on the occasion of his 70th birthday in recognition of his outstanding contributions to electrochemistry     

Potentiometric evaluation of calix[4]arene anion receptors in membrane electrodes: phosphate detection

Ion-selective membrane electrodes doped with the urea- or thiourea-functionalised calix[4]arenes, 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-N′-(phenylureido)butyl]oxy]-26,28-dipropoxy calix[4]arene (I) and 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-(N′-phenylthioureido)-butyl]oxy]-26,28-dipropoxy calix[4]arene (II), were evaluated for anion sensing. Potentiometric results show that these calixarene ionophore-based membrane electrodes exhibit a good sensitivity to aqueous solutions of the monohydrogen orthophosphate species HPO₄²⁻ in the concentration range 5.0 × 10⁻⁵ to 1.0 × 10⁻¹ M, with near-Nernstian response slopes of −33.0 and −28.0 mV dec⁻¹ for ionophores I and II, respectively. Selectivity coefficient values for monohydrogen orthophosphate over a range of common anions were determined by the fixed interference and matched potential methods and indicated that these membrane electrodes exhibit a good selectivity for HPO₄²⁻ with respect to the other anions, including sulfate and nitrate.     

Calixazacrown ethers for copper(II) ion-selective electrode

Five novel 1,3-alternate calix[4]azacrown ethers having 2-picolyl, 3-picolyl, and benzyl unit on the nitrogen atom were synthesized and used as ionophores for transition metal-selective polymeric membrane electrodes. The electrode based on 2-picolyl armed 1,3-alternate calix [4] azacrown ether exhibited Nernstian response toward copper (II) ion over a concentration range (10(-4.5) M-10(-2.5) M). The detection limit was determined as 10(-5) M in pH 7 and the selectivity coefficients for possible interfering cations were evaluated. Anions in the sample solution strongly affected the electrode response.     

两种新型杯（4）芳烃衍生物用作毛细管气相色谱固定相的研究

合成了两种新型的杯（４）芳烃衍生物：５－１′，１′－二甲基十一烯氧基苯基甲基－１１，１７，２３－三－１，１－二甲基乙基－２５，２６，２７，２８－四苄氧基杯（４）芳烃Ｃ（４）ＴＢ）及５－１′，１′－二甲基十一烯氧基苯基甲基－１１，１７，２３－三－１′，１′－二甲基－２５，２６，２７，２８－四乙氧羰甲氧基（Ｃ（４）ＴＥＣＭ）其结构经元素分析ＩＲ，＾１ＨＮＭＲ，ＭＳ的数据证实，分别将其与ＯＶ－１７０１固     

Discrimination of methylammonium from organic ammonium ions using ion-selective electrodes based on calix[4]arene-crown-6 conjugates.

Calix[4]-bis-2,3-naphtho-crown-6 can be used to discriminate between methylammonium and other organic ammonium ions. An electrode based on this ionophore, potassium tetrakis(p-chlorophenyl)borate (20 mol% relative to the ionophore) as an ionic additive and bis(2-ethylhexyl) sebacate as a solvent mediator in a poly(vinyl chloride) membrane matrix, displayed higher selectivity for methylammonium than for various other organic ammonium ions. However, there was considerable interference by inorganic cations, especially Cs+. Similar calix[4]arene-crown-6 conjugates, such as calix[4]-bis-1,2-benzo-crown-6, calix[4]-bis-crown-6, 1,3-dioctyloxy-calix[4]arene-crown-6, 1,3-diisopropoxy-calix[4]arene-crown-6 and 1,3-dimethoxy-calix[4]arene-crown-6 were less effective in discriminating methylammonium.     

杯[4]芳烃黄原酸酯衍生物的合成与阳离子萃取性能

以二氧六环作溶剂, 杯[4]芳烃二甲氧基二羟乙氧基衍生物2与氢氧化钾、二硫化碳作用合成了杯芳烃黄原酸盐衍生物3, 并进一步与碘甲烷或氯化苄反应首次合成了含黄原酸酯基的杯芳烃衍生物4a和4b. 阳离子萃取试验表明该新型杯芳烃衍生物比单硫杂杯芳烃衍生物具有更好的过渡金属离子萃取性能.     

Potentiometric Ag+ Sensors Based on Conducting Polymers: A Comparison between Poly(3,4‐ethylenedioxythiophene) and Polypyrrole Doped with Sulfonated Calixarenes

Potentiometric Ag⁺ sensors were prepared by galvanostatic electropolymerization of 3,4‐ethylenedioxythiophene (EDOT) and pyrrole (Py) on glassy carbon electrodes by using sulfonated calixarenes as doping ions. Poly(3,4‐ethylenedioxythiophene) (PEDOT) and polypyrrole (PPy) doped with p‐sulfonic calix[4]arene (C4S), p‐sulfonic calix[6]arene (C6S) and p‐sulfonic calix[8]arene (C8S) were compared. PEDOT and PPy doped with poly(styrene sulfonate) (PSS) were also included for comparison. The analytical performance of the conducting polymer‐based Ag⁺ sensors was studied by potentiometric measurements. All conducting polymer and dopant combinations showed sensitivity and selectivity to Ag⁺ compared to several alkali, alkaline‐earth, and transition‐metal cations. The type of the conducting polymer used for the fabrication of the electrodes was found to have a more significant effect on the selectivity of the electrodes to Ag⁺ than the ring size of the sulfonated calixarenes used as dopants. Selected conducting polymer‐based sensors were studied by cyclic voltammetry (CV) and energy dispersive analysis of X‐rays (EDAX) measurements. Results from the EDAX measurements show that both PEDOT‐ and PPy‐based membranes accumulate silver.     

Exploration of Pb2+ Selective Behavior of Calix[6]arene Ester Derivative

The selective behavior of calix[n]arene ester derivatives in two-phase extraction systems using polarographic technique has been investigated. Calix[4]arene tetraester derivative shows remarkable Na⁺ over Pb²⁺ selectivity; whereas calix[6]arene hexaester derivative shows Pb²⁺ over Na⁺ selectivity. The interference of some selected cations (Na⁺, K⁺, Cu²⁺ and Mg²⁺) were also examined and no significant effect on the selectivity behavior as well as extraction ability of these ionophores was found except Na⁺. The study reveals for the first time that the calix[6]arene hexaester derivative is highly Pb²⁺ selective ionophore and can be employed in the field of sensor as well as separation science and technology. The work also highlights the usefulness of polarographic technique in trace metal determination.     

A sodium ion selective optode based on fluorescein octadecyl ether octadecyl ester and application in beverage and urine assay

A fast responsive sodium ion selective fluorescent optode membrane mounted on an optical fiber has been developed. The sensing membrane contained fluorescein octadecyl ether octadecyl ester (FODEE), potassium tetrakis(4-chlorophenyl) borate (KTpClPB) and a calix[4]arene tetraester in a plasticized poly(vinyl chloride) (PVC) matrix. It exhibited a reversible response to Na⁺ in 0.5 mol/l of HCl in the concentration range of 1.0×10⁻⁶ to 0.1 mol/l. The selectivity, response time, reproducibility and lifetime of the optode membrane were discussed. The practical use of this sensor was demonstrated by real sample analysis in complex sample solutions such as beverage and urine samples.     

Supramolecular incorporation of fullerenes on gold surfaces: comparison of C60 incorporation by self-assembled monolayers of different calix[n]arene (n = 4, 6, 8) derivatives

[reaction: see text] Two new calix[6]arene derivatives 3 and 4 in a 1,4-anti conformation and one calix[8]arene derivative 5 were synthesized. SAMs of calix[n]arene (n = 4, 6, 8) derivatives 1-5 were formed on gold bead electrodes. Cyclic voltammetry with Ru(NH3)6(3+/2+) as a redox probe, together with impedance spectroscopy and reductive desorption, indicates that SAMs of 5 have a higher coverage than those of 3 and 4 due to the presence of hydrogen bonding and possibly its conformation. Noncovalent immobilization of C60 on gold surfaces was achieved with SAMs of calix[8]arene derivative 5 but not with those of 1-4.