Determination of aceclofenac using adsorptive stripping voltammetric techniques on conventional and surfactant chemically modified carbon paste electrodes

An electroanalytical method for determination of the anti-inflammatory agent aceclofenac at the ppb level using adsorptive stripping voltammetric techniques on conventional and surfactant chemically modified electrodes is developed. In this electroanalytical study a process of aceclofenac adsorption on carbon particles has been identified. In order to improve the aceclofenac determination, a chemical modification of the carbon paste was carried out employing several hydrophobic substances such as phospholipid and fatty acids, as well as several surfactants such as the non-ionic Triton X-100 and Triton X-405 and anionic sodium dodecyl sulfate. The influence of parameters such as pH, preconcentration time, carbon Nujol ratio, surfactant carbon ratio, potential scan rate, etc., on sensitivity of the method were widely studied. The proposed method was applied to the determination of the active compound in tablets.     

Self-aggregation and supramolecular structure investigations of Triton X-100 and SDP2S by NOESY and diffusion ordered NMR spectroscopy

The self-aggregation and supramolecular micellar structure of two surfactants in aqueous solution, the anionic surfactant SDP2S (sodium dodecyl dioxyethylene-2 sulfate) and the nonionic surfactant Triton X-100 (octylphenol-polyoxyethylene ether with 9.5 ethoxy groups), were investigated by NMR spectroscopy. The critical micellar concentration (CMC), the size, and shape of the aggregates were determined by diffusion ordered NMR spectroscopy (DOSY), while 2D NOESY NMR spectra were used to study the mutual spatial arrangement of surfactant molecules in the aggregated state. A nonlinear increase of the micellar hydrodynamic radius, indicating possible sphere-to-rod shape transition, was found for SDP2S at higher surfactant concentrations. Triton X-100 micelles were found to be almost spherical at low surfactant concentrations, but formation of ellipsoid shaped particles and/or micellar aggregation was observed at higher concentrations. The NOESY data show that at low concentration Triton X-100 forms a two-layer spherical structure in the micelles, with partially overlapping internal and external layers of Triton X-100 molecules and no distinct hydrophilic-hydrophobic boundary.     

Anodic-stripping voltammetry of heavy metals in the presence of organic surfactants

The efficacy of fumed silica for removal of sorption interferences by organic surfactants in the anodic-stripping voltammetry of heavy metals is demonstrated. Appropriate addition of silica to the sample solution rapidly "purifies" it from interfering surfactants during the nitrogen purge step. Up to at least 6 ppm of gelatin, Triton X-100, albumin or Liqui-Nox then does not affect the stripping response of cadmium, lead and zinc at the hanging mercury drop electrode. A relative standard deviation of 5.5% is obtained for 20 successive measurements of 1 x 10(-7)M lead in the presence of 2 ppm Triton X-100. Analogous improvements are observed at the mercury film electrode (in the presence of up to 60 ppm of these surfactants). The use of silica thus possesses the advantages of speed, efficiency, simplicity and low cost compared to other schemes for dealing with surfactant interferences in anodic-stripping voltammetry.     

Determination of surface-active compounds in precipitation studies by ac polarography

The simple procedure is based on measurement of the capacity current of the mercury electrode by a.c. polarography after adsorption of the surfactant. Nonionic surfactants of the Triton-X series were studied in connection with precipitation of colloidal silver iodide. Useful results were achieved in the 10^?4–10^-7 mol dm^?3 range for Triton X-100, X-305 and X-705 by adjusting the sorption time, the type of molecular transport to the electrode and the dilution ratio.     

Spectroscopic investigations on the binding of ammonium salt of 8-anilino-1-naphthalene sulfonic acid with non-ionic surfactant micelles in aqueous media

The anionic dye 8-anilino-1-napthalensulfonic acid ammonium salt, or ANS, was used as a fluorescent probe to investigate the behaviour of dye-surfactant interactions in aqueous solutions of Triton X-100 and the Brij and polyoxyethylene tridecyl ether (POE TDE) series of polyoxyethylene non-ionic surfactants. The fluorescence behaviour of the dye with the non-ionic surfactants was examined in micellar media. The concentration of surfactant was kept well above the cmc to investigate the interaction of the dye with surfactant micelles. In this investigation, the relative fluorescence enhancements, binding constants of the dye to the surfactant micelles and aggregation numbers of the micelles were determined, from the analysis of spectroscopic data.     

AOT/Triton X-100混合反胶束体系中假丝酵母脂肪酶催化蓖麻油水解的活性

研究了二(2-乙基己基)琥珀酸磺酸钠(AOT)/Triton X-100混合反胶束体系中假丝酵母脂肪酶(candida rugosa lipase)催化蓖麻油水解的反应. 考察了Triton X-100占总表面活性剂的摩尔分数(x(Triton X-100))、水与总体表面活性剂的摩尔比(ω0)、pH值、反应温度以及底物蓖麻油的浓度等因素对酶活性的影响. 研究结果表明, 加入非离子表面活性剂Triton X-100可以使假丝酵母脂肪酶的活性得到显著提高, 但是当底物蓖麻油的浓度大于0.24 mol·L-1时, 会对假丝酵母脂肪酶产生抑制作用.     

Surfactant effects on the spectrophotometry of the gadolinium—chrome azurols complex

Increased molar absorptivities and red-shifted absorbance maxima were noted only upon the addition of cetylpyridinium chloride (CPC), a cationic surfactant. A 1:2:4 gadolinium/chrome azurol S/CPC complex was forned but dissociated at [CPC]/ [Gd³⁺] > 4 apparently because gadolinim(III) was displaced from this complex by additional surfactant monomers. Ternary complexes having different stoichiometries formed in the presence of excess dye. Sodium dodecyl sulfate (SDS), an anionic suffactant, induced dissociation of the binary complex at micellar concentrations, suggesting that dissociation resulted from adsorption of Gd³⁺ cations on the negatively charged micellar surface. Addition of Triton X-100, a nonionic surfactant, had little effect at either micellar or submicellar concentrations. These results confirm that complex stability is an important factor in the use of surfactants as sensitizers in quantitative spectrophotometry.     

FLUORESCENCE PROBE FOR MICROENVIRONMENTS: A NEW PROBE FOR MICELLE SOLVENT PARAMETERS AND PREMICELLAR AGGREGATES

Abstract— A previous study on the electronic spectroscopy of p -N,N-dialkylaminobenzylidenemalononitrile, 1, has been extended to a larger variety of organic solvents and to micelles of ionic and nonionic surfactants. By comparing the fluorescence emission (λ_F and φ_∫) of 1 in micelles and in homogeneous organic solvents, the effective polarity and the microviscosity of the micellar environments of potassium dodecanoate, sodium dodecyl sulfate, cetyltrimethylammonium bromide and Triton X-100 micelles have been determined to be 40, 40, 36 and 28, respectively and 23, 31, 34 and 28 cP, respectively. These results indicate that the fluorescence probe is located in the micelle–water interface of a micelle and this region of a micelle is polar and viscous. 1 has also been studied in different surfactants with varying surfactant concentrations. The φ_∫ of 1, a microviscosity gauge for micellar aggregates, remains unchanged at the critical micelle concentrations of various surfactants, but decreases at much lower surfactant concentrations. This is attributable to the formation of premicellar aggregates of surfactant molecules below their critical micelle concentrations.     

Self-Assembled Supramolecular Micellar Structures Based on Non-ionic Surfactants and Cyclodextrins

The complexation between non-ionic polyethylene oxide (PEO)-based surfactants (Triton X-45, Triton X-100, polyethylene glycol-1000-monostearate, and Brij 35) and cyclodextrins is studied. It is shown that the addition of surfactant solutions to the aqueous solution of alpha, beta-, and gamma-cyclodextrins affords poorly soluble crystalline precipitates. Parameters of crystalline structure and the composition of complexes are analogues to those obtained on the basis of polyethylene oxide. Using a method of surface tension it is shown that cyclodextrins favor the increase of the value of critical micelle concentration (CMC) of surfactants. The dependence of CMC from the molar ratio cyclodextrin/surfactant permits us to determine the composition of inclusion complexes in solution. For Triton X-100 and polyethylene glycol-1000-monostearate values of stoichiometric composition of complexes in solution and in condensed phase agree well. It is shown that in the presence of beta-cyclodextrin the destruction of micelles based on Triton X-100 occurs. UV-spectroscopy is used for the investigation of the microenvironment of a phenyl group in inclusion complexes based on alpha- and beta-cyclodextrins. The interaction of gamma-cyclodextrin with PEO surfactants results in the formation of novel double-tailed surfactants. The values of CMC registered in solutions of these complexes is lower than the corresponding value of Triton X-100 and polyethylene glycol-1000-monostearate. The stoichiometric composition of complexes in solution is established from the dependence of CMC versus the gamma-cyclodextrin/surfactant ratio. The composition of the complexes in solution and condensed phase agree well. The interaction of alpha- and gamma-cyclodextrins with Brij 35 results in the formation of nonstoichiometric complexes. The investigation of the dependences of CMC of modified surfactants from temperature shows that these supramolecular structures exist at high temperatures. Copyright 1999 Academic Press.     

Modified carbon paste sensor for cetyltrimethylammonium ion based on its ion-associate with tetrachloropalladate(II).

A comparative study was made between developed chemically modified carbon paste electrodes and PVC membrane electrodes for the cationic surfactant cetyltrimethylammonium bromide (CTAB). The carbon paste electrode modified with cetyltrimethylammonium-tetrachloropalladate(II) (CTA-TClP) provides a more sensitive and stable device than that shown by electrodes with an inner reference solution. The best performance was obtained by an electrode based on the paste containing 3.6 wt% CTA-TCIP, 1.8 wt% ethylhexadecyldimethylammonium bromide, 37.6 wt% graphite and 57 wt% tricresyl phosphate. The sensor exhibited a Nernstian response for CTAB over a wide concentration range of 3.5 x 10(-7) to 1.0 x 10(-3) M with a detection limit of 2.0 x 10(-7) M between pH 2.7 and 8.2 with a fast response time of 相似文献   

吸附与润湿II.Triton X-100和Triton x-305在炭黑/水和炭黑/环己烷界面上的吸附层结构

测定了15℃和30℃时炭黑自水和环己烷中吸附非离子型表面活性剂TritonX-100和Triton X-305的等温线;计算了吸附过程的标准热力学函数;测定了石墨/水/环己烷和石墨/水/空气的接触角与表面活性剂浓度的关系, 分析所得结果,可得结论:在炭黑/水或石墨/水界面上,Triton型表面活性分子形成单分子吸附层,分子以憎水的iso-C8H17C6H4基团附着在表面,而以亲水的聚氧乙烯链伸入水相的方式取向;在炭黑/环已烷或石墨/环己烷界面上,分子是通过聚氧乙烯链吸附到表面上的,当浓度增加时分子在表面可能通过聚氧乙烯链间的相互作用而发生聚集,即可能形成表面反式胶团。     

Wetting and adsorption: II. Adsorption of Triton X-100 and Triton X-305 onto carbon black from water and cyclohexane solutions

The adsorption isotherms of nonionic surfactants Triton X-100 and Triton X-305 from water and cyclohexane on carbon black have been determined at 15 and 30°C. The Langmuir-type and BET-type isotherms are obtained for adsorption of Triton X-100 and Triton X-305 from water and cyclohexane respectively. Both the contact angles of water for graphite/water/air and graphite/water/cyclohexane decrease monotonously with increasing surfactant concentration. From these results, it is proposed that the adsorption of Triton X-100 and Triton X-305 on carbon black or graphite from water is monolayer. For the adsorption from cyclohexane solutions, the ethyleneoxide group of the surfactant molecules may be adsorbed onto the polar spot at the surface of carbon black, and the hydrophobic group of adsorbed molecules may direct toward the liquid phase or attaches to the nonpolar surface region around the polar spot. As the concentration increases, the ethylene oxide groups of the adsorbed molecules can be aggregated with each other via polar interactions to form hemi-reversed micelle.     

Characterization of the fluorescence emission properties of prodan in different reverse micellar environments

We have examined the steady state and time resolved fluorescence emission properties of the hydrophobic fluorescence probe, prodan, in three representative reverse micellar systems formed by the surfactants poly(oxyethylene) (tetramethylbutyl) phenylether (Triton X-100, neutral), cetyl trimethylammonium bromide (CTAB, cationic) and sodium bis-(2-ethylhexyl) sulfosuccinate (AOT, anionic) in organic solvent media containing different concentrations of water. The results obtained from the experiments indicate conspicuous dependence of the emission behaviour of prodan on the type of surfactant used and the water/surfactant molar ratio (w0). The nature of the emission profiles, along with relevant parameters namely emission maximum (lambda(em)max), anisotropy (r) and lifetime (tau) data are used to infer the distribution and microenvironments of the prodan molecules in the reverse micelles at different w0 values. Furthermore, quantitative estimates have been obtained for the polarities (in terms of the empirical polarity parameter E(T)(30)) of the sites of solubilization of the fluorophore in different reverse micellar systems.     

Micellar extraction preconcentration of barium with phases of nonionic surfactants at the cloud point

The micellar extraction of barium with phases of nonionic surfactant Triton X-100 was studied in the presence of aliphatic monocarboxylic acids, crown ethers, and Carboxyarsenazo and its mixtures with cetylpyridinium chloride and octylamine. It was shown that the complete extraction of barium into the micellar phase was attained using Carboxyarsenazo and cationic surfactants in the presence of octylamine through the formation of a ternary hydrophobic complex. The conditions for the determination of the atomic absorption of barium in water with preconcentration into the nonionic surfactant phase at the cloud point temperature were developed.     

Extraction of lanthanide ions from acidic and strongly acidic media by phosphine oxide derivatives using temperature-induced phase separation

A composite for the extraction of lanthanide ions from strongly acidic media by temperature-induced phase separation was designed based on the nonionic surfactant Triton X-100 and new phosphine oxide derivatives. The dependence of the efficiency and selectivity of micellar extraction on the length of the hydrophobic substituent at the P=O group is determined by both the influence of hydrophobic substituents on the electron-donor capacity of the P=O group and the solubility of phosphine oxides in aqueous and micellar phases. The nitric acid concentration was found to influence the efficiency of extraction of lanthanide ions by phosphine oxides with different structures. An increase in the concentration of nitric acid in an aqueous medium from 0.1 to 1 mol L⁻¹ leads to a decrease in the degree of extraction by water-soluble derivatives and a substantial increase in the degree of extraction by phosphine oxides, which are soluble only in the micellar phase of Triton X-100.     

Electrochemical reduction of oxygen on double-walled carbon nanotube modified glassy carbon electrodes in acid and alkaline solutions

The oxygen reduction reaction has been investigated on double-walled carbon nanotube (DWCNT) modified glassy carbon (GC) electrodes in acid and alkaline media using the rotating disk electrode (RDE) method. The surface morphology and composition of DWCNT samples was examined by transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Aqueous suspensions of DWCNTs were prepared using Nafion and non-ionic surfactant Triton X-100 as dispersing agents. The RDE results indicated that the DWCNT modified GC electrodes are active catalysts for oxygen reduction in alkaline solution. In acid media DWCNT/GC electrodes possess poor electrocatalytic properties for O₂ reduction which indicates lack of metal catalyst impurities in the DWCNT material studied. The oxygen reduction behaviour of DWCNTs was similar to that of multi-walled carbon nanotubes (MWCNTs) observed in our previous studies.     

Electrochemical investigation of acid-base properties of ordered liquid systems

Acid-base properties of ordered media were investigated via potentiometry, polarography and electrochemical probes. Electrochemical probes have a pH-dependent reduction potential and their oxidized and reduced forms have a different affinity for aqueous and organic phases. Solutions of anionic, cationic and nonionic surfactants were investigated. One anionic and one cationic surfactant stabilized emulsion were studied. A water-dodecane-pentanol-anionic surfactant microemulsion and a water-heptane-butanol-cationic surfactant were also investigated for several compositions. In micellar solutions and emulsions, it was possible to standardize and use the classical glass electrode for pH values in the range 1-12. The hydrogen electrode was required in the microemulsion systems. The reduction of electrochemical probes was studied by polarography. It is shown that in the ordered media studied, the aqueous phase played the most important role in micellar solutions and in O/W emulsions, as far as acid-base properties were concerned. In microemulsions, the acid-base properties of the aqueous phase were very different to those of water. The alizarin probe could be reduced at a "local" pH of about 12 when the aqueous phase pH was only 6.     

Observations of the effect of anionic, cationic, neutral, and zwitterionic surfactants on the Belousov-Zhabotinsky reaction

In this paper we report the experimental observations of the effects of various surfactants on the oscillations of the ferroin-catalyzed Belousov-Zhabotinsky (BZ) reaction. The oscillations are followed by observing the change in absorbance at 510 nm due to ferroin in a well-stirred closed BZ reacting system. We have used sodium dodecyl sulfate (SDS) as the anionic surfactant, cetyl trimethylammonium bromide (CTAB) as the cationic surfactant, Triton X-100 as the neutral surfactant, and 3-[(3-cholamidopropyl)dimethylammonio)]-1-propanesulfonate (CHAPS) as the zwitterionic surfactant. In general, we observed that there is a change in the oscillation behavior in the presence of each of these surfactants above their critical micellar concentrations. For different surfactants, the time-dependent evolution of the oscillations is found to be characteristic of the surfactant. The results of our study suggest that the evolution of oscillations is most regular in the presence of micelles of SDS.     

AGGREGATION CHARACTERISTICS OF LASER DYE RHODAMINE 6G IN AQUEOUS SURFACTANT SOLUTIONS

Abstract— –The role of surfactants as deaggregating agents for the laser dyes is investigated by spectrophotometry using Rhodamine 6G as a representative. A method to estimate the fraction of dye present as monomer, dimer and as a monomer-surfactant (monomer or micelle) complex is described. It is shown that among the surfactants, cetyl trimethyl ammonium bromide, Triton X-100, sodium lauryl sulfate (SLS) and potassium oleate, the anionic ones are the most effective in suppressing the aggregation of Rhodamine 6G. While the non-ionic surfactant is found to be effective only above its critical micellar concentration, the cationic surfactant has no effect on aggregation. The optimum concentration of SLS needed for suppression of dye-dimers is estimated.     

Mixed micelle behavior of Pluronic L64 and Triton X-100 with conventional and dimeric cationic surfactants

The mixed micellar properties of a triblock copolymer, Pluronic L64, (EO)13(PO)30(EO)13, and a nonionic surfactant, Triton X-100, in aqueous solution with conventional alkyl ammonium bromides and their dimeric homologues were investigated with the help of fluorescence and cloud point measurements. The composition of mixed micelles and the interaction parameter, beta, evaluated from the critical micelle concentration (cmc) data for different mixtures using Rubingh's and Motomura's theories are discussed. It has been observed that the mixed micelle formation between monomeric/dimeric alkyl ammonium bromides and L64 was due to synergistic interactions which increase with the increase in hydrophobicity of the cationic component. On the other hand, synergistic mixing was observed in the mixed micelles of Triton X-100 and monomeric cationic surfactants, the magnitude of which decreases slightly with the increase in hydrophobicity of the cationic component. Antagonistic interactions were observed in the case of Triton X-100 and dimeric cationic surfactants.