Coupled transport of Ag(I) ions through triethanolamine–cyclohexanone-based supported liquid membranes

Facilitated transport of silver(I) ions in acidic medium, across a supported liquid membrane (SLM) by using triethanolamine (TEA) as carrier, dissolved in cyclohexanone, has been investigated. The parameters studied are HNO₃ concentration variation in the feed, pH of the feed solution, carrier concentration in the membrane phase, silver(I) ions concentration in the feed phase and KCN concentration in the stripping phase. Increase in H⁺ concentration by increasing HNO₃ concentration from 0.5 to 1 M results into an increase in silver ions flux but a decrease in flux has been found beyond 1 M HNO₃ concentration in the feed, providing a maximum flux of 3.21 × 10⁻⁷ mol/m² s at 1 M HNO₃. Increase in TEA concentration inside the membrane enhances flux with its maximum value at 2.25 M TEA. Further increase in the concentration of TEA leads to a decreased rate of transport due to the increase in viscosity of membrane liquid. The optimum conditions for Ag(I) ions transport are 1 M HNO₃ (feed), 2.25 M TEA (membrane) and 1.5 M KCN in the stripping phase. It has been observed that Ag(I) flux across the membrane tends to increase with increase in Ag(I) ions concentration in the feed phase. Applying the studied conditions to silver plating waste solutions, Ag ions have been removed up to 99% in a time interval of 5 h.     

Competitive transport of seven metal cations through bulk liquid membrane using 5,12-di(phenoxymethyl)-1,4-dioxa-7, 10-dithiacyclododecane-2,3-dione as carrier

The competitive metal ion transport of copper(II), cobalt(II), zinc(II), cadmium(II), silver(I), chromium(III) and lead(II) with a S-O donor compound was examined. Competitive transport experiments involving the metal cations from an aqueous source phase through an organic membrane into an aqueous receiving phase have been carried out using 5,12-di(phenoxymethyl)-1,4-dioxa-7,10-dithiacyclododecane-2,3-dione as the ionophore present in the organic phase. Fluxes and selectivities for competitive metal cations transport across bulk liquid membranes have been determined in a variety of chlorinated hydrocarbon and aromatic hydrocarbon solvents. The membrane solvents include: dichloromethane (DCM), chloroform (CHCl₃), 1,2-dichloroethane (1,2-DCE), and nitrobenzene (NB) and also in chloroform-dichloromethane (CHCl₃-DCM) and chloroform-nitrobenzene (CHCl₃-NB) binary mixtures. Although the selectivity for silver(I) cation in all of these organic solvents is fundamentally similar, but the most transport rate for Ag(I) was obtained in dichloromethane. The sequence of transport rate for silver ion in organic solvents was: DCM > CHCl₃ > 1,2-DCE > NB. A linear relationship was observed between the transport rate of silver ion and the composition of CHCl₃-DCM, but a non-linear behavior was observed in the case of CHCl₃-NB binary solution. The influence of the stearic, palmetic and oleic acids as surfactant in the membrane phase on the transport of the metal cations was also investigated.     

多尺度结构Ag/PA6纳米纤维膜的制备及其催化性能

随着工业的进步,废水处理特别是印染废水的处理成为亟待解决的问题.银纳米粒子因其特殊的物理化学性能而表现出催化活性,但银纳米粒子的团聚限制了其使用,所以出现了一系列新的载体材料,如微球、薄膜和纤维等.其中电纺纳米纤维由于具有高比表面积,作为载体材料具有非常大的优势,而将常规电纺纳米纤维作为载体也已有报道.但是,将具有更高比表面积的电纺纳米纤维作为载体,特别是一种类似于树枝状结构的多尺度纳米纤维作为载体还鲜有报道.本文制备了一种多尺度结构的PA6纳米纤维膜,该纳米纤维膜由直径为50?120 nm的主纤维和10?50 nm的分支纤维构成;由于分支纤维的出现,多尺度结构纳米纤维膜的比表面积得到了提高,可以为银纳米粒子的负载提供更多附着位点.制备的多尺度结构纳米纤维膜通过银胶溶液浸渍成功地负载银纳米粒子,对制备的纳米纤维膜的形态、化学结构以及对亚甲基蓝的催化性能进行了探讨.SEM,EDS和TEM结果表明,银纳米粒子成功地负载在多尺度结构纳米纤维的表面,并且银纳米粒子的粒径以及负载量可以通过变换银胶溶液的浓度合理调控.此外,与常规PA6纳米纤维膜相比,多尺度结构纳米纤维膜更有利于银纳米粒子的分散,同样通过银胶溶液A浸渍,负载在多尺度结构纳米纤维上银纳米粒子粒径为8.6 nm,而负载在普通PA6纳米纤维上银纳米粒子粒径为11.2 nm.XPS分析表明,银纳米粒子成功地负载到多尺度结构纳米纤维上,并且经不同银胶溶液处理,纳米纤维膜的载银量不同.通过O的高能XPS分析发现,银纳米粒子与PA6分子间形成了配位键,这在一定程度上有利于Ag纳米粒子的固定,阻止了Ag纳米粒子的团聚.Ag/PA6纳米纤维膜以及多尺度结构Ag/PA6纳米纤维膜催化降解实验表明,多尺度结构Ag/PA6纳米纤维膜具有较高的催化活性,反应2 h后对10 mg/L亚甲基蓝的降解率达到98.13%,并且降解过程符合伪一级动力学.不同浸渍液浓度处理纳米纤维膜催化实验表明,Ag纳米粒子的大小以及含量都会影响纳米纤维的催化活性,纳米粒子粒径越小,其催化活性越高;不同NaBH4加入量催化体系催化实验表明,随着NaBH4加入量的增大,催化体系的降解率增高,其对催化体系的催化性能起着至关重要的作用;其他条件一定,随着染料初始浓度的增大,催化体系的催化性能下降;循环实验表明,经5次循环之后,其降解率仍高达83.5%,该纳米纤维膜具有一定的循环使用性能.     

银离子交换的沸石修饰电极的循环伏安新特性

银离子交换沸石Y修饰电极(Ag⁺-沸石Y)的循环伏安(CV)行为, 不同于溶液中的银离子在固体银电极表面上的CV行为. Ag⁺-沸石电极中银离子还原电位明显受沸石体内银簇影响. 依据Ag⁺-沸石修饰电极在含有能够与银离子形成难溶盐的电解质中的CV行为, 本文发现了沸石对溶液中阴离子具有尺寸选择效应, 并解释了银离子交换沸石修饰电极的循环伏安反应特性.     

Synthesis, reaction and structure of a highly light-stable silver(I) cluster with an Ag4S4N4 core having a tridentate 4N-morpholyl 2-acetylpyridine thiosemicarbazone ligand: use of water-soluble silver(I) carboxylates as a silver(I) source

A novel neutral tetrameric silver(I) cluster [Ag(mtsc)](4) was obtained from reactions of a tridentate (4)N-morpholyl 2-acetylpyridine thiosemicarbazone ligand (N'-[1-(2-pyridyl)ethylidene] morpholine-4-carbothiohydrazide, Hmtsc) and silver(I) sources containing Ag-O bonds (Ag(2)O, Ag(OAc), silver(I) 2-pyrrolidone-5-carboxylate (infinity){[Ag(Hpyrrld)](2)}, silver(I) 5-oxo-2-tetrahydrofurancarboxylate (infinity){[Ag(othf)](2)}, and silver(I) complexes with camphanic acid (infinity){[Ag(ca)]} and (infinity){[Ag(ca)(Hca)]}). The cluster was characterized by elemental analysis, TG/DTA, FTIR and single-crystal X-ray analysis in the solid state. The solution properties of the complexes were investigated using solution molecular weight measurement, ESI-MS and solution ((1)H, (13)C and (31)P) NMR spectroscopy. The obtained cluster is a novel example of a light-stable Ag(I) cluster with a tridentate thiosemicarbazone ligand and the second report of a crystal structure of a thiosemicarbazone silver(I) complex. The reaction of the tetramer with a large excess of PPh(3) gave dimeric complexes, namely, [Ag(micro(S)-mtsc)(PPh(3))](2) and [(PPh(3))(2)Ag(micro(S)-mtsc)(2)Ag]. The chloroform solution of the tetrameric complex showed modest and effective activities against selected bacteria (Bacillus subtilis, Staphylococcus aureus and Pseudomonas aeruginosa) and yeasts (Candida albicans and Saccharomyces cerevisiae), respectively, but it did not inhibit the growth of any selected microorganisms in a water-suspension system.     

Selective transport of silver ion through a supported liquid membrane using hexathia-18-crown-6 as carrier.

A facile supported liquid membrane (SLM) system for the selective and efficient transport of silver ion is introduced. The SLM used is a thin porous polyvinyldifluoride membrane impregnated with hexathia-18-crown-6 (HT18C6) dissolved in nitrophenyloctyl ether. HT18C6 acts as a specific carrier for the uphill transport of Ag+ ion as its picrate ion paired complex through the SLM. In the presence of thiosulfate ion as a suitable stripping agent in the strip solution, transport of silver occurs almost quantitatively after 4 h. The selectivity and efficiency of silver transport from aqueous solutions containing other Mn+ cations such as Mg2+, Ca2+, Co2+, Ni2+, Cu2+, Zn2+, Pb2+, Cd2+, Hg2+, Fe3+ and Cr3+ ions were investigated.     

Synthesis and ligand properties of thianthrenophane

Thianthrenophane 1 has a cavity which offers enough room to potentially enable endohedral coordination to small ions or molecules. For the complexation of silver(I) perchlorate the complex stability constants of 1 logK1=5.45 +/- 0.13 and of thianthrene logK2=9.16 +/- 0.10 were determined by UV/Vis titration. Single competition transport experiments with ten metal salts demonstrate a very high selectivity of 1 as a carrier for silver(I) and a distinctly higher transport rate compared to carriers such as thianthrene and 1,4,8,11-tetrathiacyclotetradecane (14-ane-S4). Although the X-ray crystal structure analysis of the polymeric [Ag(1)]ClO4.(dioxane)7 complex shows an exohedral coordination to silver(I) we suggest that the formation of an endohedral [Ag(1)]+ complex is the explanation for the unusual carrier selectivity of silver(I) by 1 in bulk liquid membrane.     

Determination of Silver by Flame Atomic Absorption Spectrometry after Preconcentration on Naphthalene Modified with Dithizone

A solid‐phase extraction method for preconcentration of silver and consequent determination by atomic absorption spectrometry is described. The method is based on the adsorption of silver on naphthalene modified with dithizone in a column. The adsorbed silver is eluted from the column with a thiourea solution and determined by flame atomic absorption spectrometry. The adsorption conditions including pH, reagent concentration, eluent volume, flow rate and interfering ions were investigated. The calibration graph was linear in the range 10–1000 ng mL^?1 of Ag in the initial solution with r = 0.9998. The limit of detection based on 3S_b was 3.9 ng mL^?1. The relative standard deviation for ten replicate measurements of 40 and 600 ng mL^?1 of Ag was 4.4% and 0.9%, respectively. The method was applied to the determination of silver in mineral, radiology film and wound dressing samples.     

Improvement of the silver/silver chloride reference electrode and its application to pH measurement

When a silver/silver chloride (Ag AgCl ) reference electrode was used continuously in a low conductivity solution or reductive solution, it was often observed that stability of the liquid junction potential was lost. This phenomenon was remarkable with a Ag AgCl reference electrode compared to a calomel reference electrode. We found that 340 mg l(-1) of silver was dissolved in 3 M potassium chloride (KCl) internal solution as silver complex ions (AgCl(-(x-1))(x)) for x = 2 or 3. However, only 1.93 mg l(-1) of silver chloride (AgCl) can theoretically be dissolved in water. The complex ion that effused into the sample solution through the liquid junction clogged the liquid junction (e.g. porous ceramic) as AgCl, or as metallic silver (Ag) in reducing solution. Therefore, the constant effusion of KCl internal solution was inhibited, and the liquid junction potential became unstable or fluctuating. A new reference electrode was developed, which can eliminate AgCl(-(x-1))(x) in 3 M KCl internal solution by the use of chelating resins. A combination of this reference electrode with a pH electrode made long-term stable pH measurements possible.     

Seed‐Mediated Growth of Silver Nanocubes in Aqueous Solution with Tunable Size and Their Conversion to Au Nanocages with Efficient Photothermal Property

Two seed‐mediated approaches for the growth of silver nanocubes in aqueous solution have been developed. Addition of a silver‐seed solution to a mixture of cetyltrimethylammonium chloride (CTAC), silver trifluoroacetate, and ascorbic acid and heating the solution at 60 °C for 1.5 h produces uniform Ag nanocubes with tunable sizes from 23 to 60 nm by simply adjusting the volume of silver‐seed solution introduced. Alternatively, the silver‐seed solution can be injected into a mixture of cetyltrimethylammonium bromide (CTAB), silver nitrate, copper sulfate, and ascorbic acid and heated to 80 °C for 2 h to generate 46 nm silver nanocubes. Plate‐like Ag nanocrystals exposing {111} surfaces can be synthesized by reducing Ag(NH₃)₂⁺ with ascorbic acid in a CTAC solution. Relatively large Ag nanocubes were converted to cuboctahedral Au/Ag and Au nanocages and nanoframes with empty {111} faces through a galvanic replacement reaction. The nanocages showed a progressive plasmonic band red‐shift with increasing Au content. The nanocages exhibited high and stable photothermal efficiency with solution temperatures quickly reaching beyond 100 °C when irradiated with an 808 nm laser for large heat and water vapor generation.     

Fabrication of a Simple and Cheap Screen-printed Silver/Silver Chloride (Ag/AgCl) Quasi-reference Electrode

In this work, a silver/silver chloride ink is fabricated using two steps. First the silver ink is prepare using silver, nail polish and acetone. Then the silver ink is painted in a paper substrate and a silver chloride layer is deposited using a bleach solution. The result is the silver/silver chloride conductive ink. The silver ink is cheap ($2.49/g), well-dispersive and very easy to fabricate. The materials were characterized by SEM and XRD. The Ag ink showed the formation of a continuous network throughout the silver ink film with fewer agglomeration. The effective chlorination process was also observed in the Ag/AgCl characterization. Since the Ag/AgCl substrate will be used as a quasi-reference electrode, it is important to investigate the electrical properties. The Ag ink showed an average ohmic resistance of 2.27 Ω. The addition of the AgCl layer decreases the conductivity, as expected. In summary, the Ag/Ag/Cl ink developed is simple, well-dispersed, cheap and with good conductivity. Therefore, it can be used as a conductive ink in the fabrication of quasi-reference electrodes.     

Preparation and study of polyacryamide-stabilized silver nanoparticles through a one-pot process

A one-pot route was illustrated to synthesize stable well-dispersed silver colloids stabilized by polyacrylamide on a large scale. Reduction of silver ions and polymerization of acrylamide occurred almost simultaneously in the absence of a commonly used reducing agent and initiator. A possible mechanism for the formation of silver nanoparticles with bimodal size distribution was proposed. The structure and composition of the obtained nanoparticles were characterized carefully. Furthermore, light scattering simulation and UV-vis absorption studies confirmed that the obtained colloids were the mixture of Ag and Ag2O nanoparticles. The presence of silver oxide layers on the nanoparticle surface should be responsible for the broadening of the surface plasmon band of silver nanoparticles. Ag2O layers could be added or removed from Ag nanoparticle surfaces by the addition of HNO3, HAc, or NaCl solution to the as-obtained silver colloids.     

Metallogel Template Fabrication of pH‐Responsive Copolymer Nanowires Loaded with Silver Nanoparticles and Their Photocatalytic Degradation of Methylene Blue

Poly(N,N′‐methylenebisacrylamide–4‐vinylpyridine) (P(MBA‐4VP)) nanowires loaded with silver nanoparticles (Ag NPs) have been fabricated by silver metallogel template copolymerization, and subsequently, silver ions are reduced instead of the template being removed. Ag NPs with a diameter of 5–15 nm were dispersed throughout the core of P(MBA‐4VP) nanowires. The size and distribution of the formed Ag NPs could be finely controlled by reduction time. The pH sensitivity of P(MBA‐4VP) nanowires offers the possibility of Ag NP release from the nanowires under acidic conditions. The photocatalytic performance of the P(MBA‐4VP) nanowires loaded with Ag NPs was evaluated for the degradation of methylene blue (MB) under UV light irradiation. Their rate of degradation is dependent on the content and size of the Ag NPs, as well as the pH values of the MB solution. Moreover, the P(MBA‐4VP) nanowires loaded with Ag NPs exhibited high photostability, and the photocatalytic efficiency reduced by only 1.81 % after being used three times.     

Preparation and characterization of activated carbon fibers supported with silver metal for antibacterial behavior

In this work, the effect of immersion in silver nitrate solution on activated carbon fibers (ACFs) was investigated in relation to adsorption behavior and antibacterial activity of ACFs supported with silver (ACF/Ag). The pore and surface properties were studied in terms of BET volumetric measurement with nitrogen adsorption, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The antibacterial activities of ACF/Ag were studied in broth dilution tests against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) from a point of view of water purification. As an experimental result, the silver content of ACF/Ag increased with increasing concentration of silver nitrate. It was found that the micropore structure slightly decreased as the silver nitrate concentration increased. Otherwise, it was revealed that the ACF/Ag possessed a strong antibacterial activity and an inhibitory effect for the growing of E. coli and S. aureus, respectively. Silver content on ACF/Ag decreased rapidly because of rough morphology of silver particles in water erosion.     

Metal nanocomposite films prepared in situ from PVA and silver nitrate. Study of the nanostructuration process and morphology as a function of the in situ routes

Cast‐hybrid films composed of polyvinyl alcohol (PVA) and silver nitrate were treated according to three different ways, thermal annealing, UV‐irradiation, and chemical reduction by a borohydride solution, to obtain PVA/silver nanocomposite films. The nanostructuration process was studied as a function of the treatment conditions, and discussed as a function of the mobility state of the polymer chains in the nanocomposite matrix during treatment. A homogeneous dispersion of crystalline silver nanoparticles was obtained by thermal annealing above T_g and below T_m and UV‐lamp irradiation below T_g. For these two treatments, the major processing parameters were the annealing temperature and time and the UV‐exposure time, respectively. For low‐conversion rate in Ag(0), the films evolved upon ageing at room temperature. Totally different morphology and Ag(0) conversion were achieved by chemical reduction in a borohydride solution. All the silver ions were reduced into Ag(0), and crystalline silver nanoparticles layers parallel to the film surface were observed after the treatment. This morphology was related to the high‐swollen state of the polymer matrix during treatment. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2062–2071, 2008     

碱性溶液中Ag3O4的电化学性质及反应机理

首次研究高价银氧化物Ag3O4(可看作为由Ag(Ⅲ)和Ag(Ⅱ)*组成)在碱性水溶液中的电化学性质和反应机理.循环伏安和XRD测试表明,Ag3O4在碱性溶液中的电化学还原过程比较复杂:在较慢的放电条件下,Ag3O4中的Ag(Ⅲ)按照Ag(Ⅲ)→Ag(Ⅱ)→Ag(Ⅰ)→Ag反应途径逐步还原为单质银;在较快的放电条件下,Ag(Ⅲ)可以直接被还原为Ag(Ⅰ),即Ag(Ⅲ)→Ag(Ⅰ)→Ag.而Ag(Ⅱ)*可直接还原成金属Ag.Ag3O4的理论放电容量可以达到553.1 mAh/g,比通常锌-氧化银电池所用AgO的电容量高出27.8%.在119C放电倍率下,Ag3O4的放电容量依然达到理论容量的83%.显示了作为新型化学电源材料的应用前景.     

Ag／TiO2复合纳米催化剂的制备和表征及其光催化活性

 采用光还原沉积贵金属法，制备了Ag／TiO2复合纳米催化剂．通过调节溶液的pH值控制TiO2表面负载银的形貌，利用AAS，XRD，TEM和XPS等手段对样品进行了表征．以苯胺氧化为模型反应，考察了Ag／TiO2复合纳米催化剂样品的光催化活性以及银沉积量和沉积形貌对催化剂活性的影响．结果表明，通过调控光还原沉积条件，可在平均粒径为24nm左右的TiO2颗粒上获得3nm左右均匀分散的银粒子；在TiO2上沉积适量的具有较高分散度的金属Ag，能有效提高TiO2对苯胺氧化反应的光催化活性．     

银合金中银、铜含量的示波滴定

报道了用示波滴定银合金中银、铜的含量。试样酸溶后,取部分试液,在pＨ５～６的ＨＡc－ＮaＡc缓冲介质中用四苯硼钠（Ｎa－ＴＰＢ）法示波滴定银。另取部分试液,加Ｖe使Ｃu＾２＋还原为Ｃu＾＋,用Ｎa－ＴＰＢ法示波滴定铜,而Ａg＋被还原为Ａa,避免了测定铜的干扰。该方法标准加入回收率为９９．８％～１００．２％,ＲＳＤ〈０．２％。     

Oxidative decarboxylation of levulinic acid by silver(I)/persulfate

The oxidative decarboxylation of levulinic acid (LA) by silver(I)/persulfate [Ag(I)/S?O?2?] has been investigated in this paper. The effects of buffer solution, initial pH value, time and temperature and dosages of Ag(I)/S?O?2? on the decarboxylation of LA were examined in batch experiments and a reaction scheme was proposed on basis of the reaction process. The experimental results showed that a solution of NaOH-KH?PO? was comparatively suitable for the LA decarboxylation reaction by silver(I)/persulfate. Under optimum conditions (temperature 160 °C, pH 5.0, and time 0.5 h), the rate of LA conversion in NaOH-KH?PO? solutions with an initial concentration of 0.01 mol LA reached 70.2%, 2-butanone (methyl ethyl ketone) was the single product in the gas phase and the resulted molar yield reached 44.2%.     

Reduction of oxygen at a NaX-Ag composite electrode and its application to the determination of oxygen in aqueous media

A composite mixture Ag-NaX zeolite (silver concentration 16.7% w/w) is synthesized usingim-pregnation and thermal decomposition. For silver impregnation, a solution of an Ag acetylacetonate complex in acetone was used. Despite the quantity of silver applied was substantially less than it would be necessary to fill the inner pore space in the zeolite completely, some part of silver formed nanocrystallites and nanoparticles giving rise to a novel composite material. The composite powder was uniformed with soot (10% w/w) and applied onto a mirror-smooth graphite surface used as an electrode matrix. The reduction of oxygen on such a surface proceeded with activity comparable to that observed on the most active planes of the silver single crystal, Ag(100).