Differential pulse anodic stripping voltammetric determination of lead(II) with a 1,4-bis(prop-2'-enyloxy)-9,10-anthraquinone modified carbon paste electrode

A sensitive and selective method for the determination of lead(II) with a 1,4-bis(prop-2'-enyloxy)-9,10-anthraquinone (AQ) modified carbon paste electrode has been developed. The method is based on non-electrolytic preconcentration via complex formation with modifier, followed by an accumulation period with a negative potential (-1.5 V), and then by a proper anodic stripping. The analytical performance was evaluated with respect to the quantity of modifier in the paste, concentration of electrolyte solution, preconcentration time, lead(II) concentration, and other variables. A linear calibration graph was obtained in the concentration range 2.00x10(-9)-1.06x10(-5) M Pb(II) (n=21, r=0.9999) with 30 s preconcentration time. The detection limit was found to be 1x10(-9) M. For eight preconcentration/determination cycles, the differential pulse voltammetric response was reproduced with 5.0 and 3.7% relative standard deviations at 2.00x10(-8) and 2.00x10(-6) M Pb(II), respectively. Rapid and convenient renewal of electrode surface allows the use of a single modified electrode surface in multiple analytical determinations over several weeks. Many coexisting metal ions had little or no effect on the determination of lead(II). The developed method was applied to lead determination in waste waters.     

Potentiometric batch and flow injection analysis of betaine hydrochloride

Novel PVC membrane electrodes for the determination of betaine ion based on the formation of betaine-tetraphenylborate (Be-TPB) and betaine-phosphotungstate (Be-PT) ion-exchangers as electroactive materials are described. The sensors show a fast, stable, near Nernstian response for 6.92 x 10(-6) to 7.94 x 10(-3) M and 1.0 x 10(-4) to 1.0 x 10(-2) M betaine hydrochloride (Be.Cl) in case of Be-TPB electrode applying batch and flow injection analysis (FIA), respectively, and 2.95 x 10(-5) to 2.26 x 10(-3) M and 3.16 x 10(-5) to 1.0 x 10(-2) M in case of Be-PT electrode for batch and FIA electrodes, respectively, at 25 degrees C over the pH range of 3.5-10 with a cationic slope of 60.2 and 59.1 mV decade(-1) and a fast potential response of < or =15 s. The lower detection limits are 7.94 x 10(-6) and 3.18 x 10(-5) M Be.Cl for Be-TPB and Be-PT electrodes, respectively. Selectivity coefficient data for some common inorganic cations, sugars, amino acids and the components other than betaine, of the mixed drug investigated show negligible interference. The electrodes have been applied to the direct potentiometric determination of betaine hydrochloride in water and in a pharmaceutical preparation under batch and FIA conditions. Potentiometric titrations of Be.Cl with NaTPB and PTA as titrants were monitored with the developed betaine electrodes as an end point indicator electrode. The determination of Be.Cl shows an average recovery of 100.8% with mean relative standard deviation of 0.61%. The effect of temperature on the electrodes was also studied.     

Voltammetric determination of terbinafine in biological fluid at glassy carbon electrode modified by cysteic acid/carbon nanotubes composite film

The electrochemical oxidation of L-cysteine (CySH) in presence of carbon nanotubes (CNTs) formed a composite film at a glassy carbon electrode (GCE) as a novel modifier for directly electroanalytical determination of terbinafine without sample pretreatment in biological fluid. The determination of terbinafine at the modified electrode with strongly accumulation was studied by differential pulse voltammetry (DPV). The peak current obtained at +1.156 V (vs. SCE) from DPV was linearly dependent on the terbinafine concentration in the range of 8.0 x 10(-8)-5.0 x 10(-5 )M in a B-R buffer solution (0.04 M, pH 1.81) with a correlation coefficient of 0.998. The detection limit (S/N=3) was 2.5 x 10(-8 )M. The low-cost modified electrode showed good sensitivity, selectivity, and stability. This developed method had been applied to the direct determination of terbinafine in human serum samples with satisfactory results. It is hopeful that the modified electrode will be applied for the medically clinical test and the pharmacokinetics in future.     

Aluminum electrode modified with manganese hexacyanoferrate as a chemical sensor for hydrogen peroxide

A chemically modified electrode was fabricated based on manganese hexacyanoferrate (MnHCF) film. The MnHCF was used as a modifier immobilized onto an aluminum electrode. Stability of the electroactive film formed on the Al electrode surface indicated that MnHCF is a suitable material for the preparation of modified electrodes. The analytical applicability of the modified electrode for the determination of hydrogen peroxide was examined. A linear response in concentration range of 6.0x10(-7)-7.4x10(-3) M (r=0.9997) was obtained with detection limit of 2.0x10(-7) M for the determination of hydrogen peroxide. The modified electrode exhibited a good selectivity for H(2)O(2) in real samples. The mentioned electrode has advantages of being highly stable, sensitive, inexpensive, ease of construction and use.     

Anion selective polymeric membrane electrodes based on cyclopalladated amine complexes

The potentiometric anion selectivity of two polymer membrane based electrodes (I and II) formulated with two new cyclopalladated amine complexes as the active components are examined. The electrodes exhibit a non-Hofmeister selectivity pattern with a significantly enhanced response towards thiocyanate, iodide and nitrite. The graph potential versus log c is linear over the concentration range 10(-6)-6x10(-2) M thiocyanate with electrode I and 10(-6)-10(-3) M with electrode II; 10(-5)-10(-2) M iodide with electrode I and 10(-3)-6x10(-2) M with electrode II; and 10(-3)-6x10(-2) M nitrite with both electrodes. The influence of the plasticizer and pH are studied. The potentiometric selectivity coefficients for I, II and blank membrane electrodes are reported. The selective interaction between Pd(II) thiocyanate, iodide and nitrite is postulated to be the reason for its higher response.     

Electrochemical response of dopamine at a penicillamine self-assembled gold electrode.

The penicillamine (Pen) self-assembled monolayer (SAM) modified gold electrode (Pen/Au) is demonstrated to catalyze the electrochemical response of dopamine (DA) by cyclic voltammetry. A pair of well-defined redox waves was obtained and the calculated standard rate constant (k(s)) is 3.88 x 10(-3) cm/s at the self-assembled electrode. The electrode reaction is a quasi-reversible process. The oxidation peak of DA can be used to determine the concentration of DA. The peak current and the concentration of DA are a linear relationship in the range of 2.0 x 10(-5) M to 8.0 x 10(-4) M. The detection limit is 4.0 x 10(-6) M. By ac impedance spectroscopy the apparent electron transfer rate constant (k(app)) of Fe(CN)(3-)/Fe(CN)(4-) at the Pen/Au electrode was obtained as 2.08 x 10(-5) cm/s. The Pen SAM was characterized with X-ray photoelectron spectroscopy (XPS), grazing angle FT-IR spectroscopy and contact angle goniometer.     

Hybridization biosensor using 2,9-dimethyl-1,10-phenantroline cobalt as electrochemical indicator for detection of hepatitis B virus DNA

A label-free biosensor for the detection of oligonucleotides related to hepatitis B virus sequence via the interactions of DNA with redox-active complex, 2,9-dimethyl-1,10-phenantroline cobalt [Co(dmp)(H2O)(NO3)2] is described. The study was carried out by the hybridization of 21-mer probe DNA modified on glassy carbon electrode (GCE) with target DNA, and [Co(dmp)(H2O)(NO3)2] whose sizes are comparable to those of the small groove of native double-helix DNA was used as an electrochemical indicator. Electrochemical detection was performed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) over the potential range where the [Co(dmp)(H2O)(NO3)2] was active. Under the optimum conditions, the electrical signal had a linear relationship with the concentration of target DNA ranging from 3.96 x 10(-7) to 1.32 x 10(-6) M, and the detection limit was 1.94 x 10(-8) M (S/N=3). The biosensor has good selectivity by detecting the three-base mismatch sequence ssDNA.     

Os(bpy)2(PVP)10Cl]Cl polymer and Nafion dual-film modified graphite electrode for the amperometric determination of trace amounts of norepinephrine.

A chemically modified graphite electrode was prepared by using a dual film of [Os(bpy)2(PVP)10Cl]Cl polymer and Nafion. The modified electrode showed excellent electrocatalytical activity for the oxidation of norepinephrine (NE) and an ability to eliminate efficiently the interference of ascorbic acid and other anions. The catalytic peak currents obtained from the cyclic voltammograms increased linearly with increasing concentration of NE. A log-log plot of catalytic current versus NE concentration showed a dual-linear relationship in the ranges 1.8 x 10(-8)-4.4 x 10(-6) M and 4.4 x 10(-6)-2.9 x 10(-4) M with correlation coefficients of 0.990 and 0.999, respectively. The detection limit was about 18 nM (3 delta). At a potential of +500 mV the chronoamperometric response showed a linear relationship between the steady state current and NE concentration in the range 1.3-130 microM. With a further increase in NE concentration a Michaelis-Menten-shaped response was observed. The apparent Michaelis-Menten constant and the maximum current were 1.7 mM and 86 microA, respectively. The modified electrode showed excellent reproducibility, sensitivity and stability for the determination of NE at trace levels.     

Differential pulse adsorptive stripping voltammetric determination of dinoseb and dinoterb at a modified electrode.

A sensitive adsorptive stripping voltammetric method for the determination of dinitrophenolic herbicides, dinoseb (DSB) and dinoterb (DTB) at a bare carbon paste electrode (CPE) and a clay modified carbon paste electrode (CMCPE) was developed. A systematic study of various experimental conditions, such as the pH, accumulation variables and composition of a modifier on the adsorptive stripping response, were examined by using differential pulse voltammetry. A significant improvement was observed in the sensitivity by using the present method with CMCPE. When CMCPE was used, a linear response was obtained over the concentration range 2 x 10(-10) to 3 x 10(-7) M and 6 x 10(-10) to 6 x 10(-7) M with lower detection limits of 1 x 10(-10) M and 5.4 x 10(-10) M for dinoseb and dinoterb, respectively, at an accumulation time of 100 s. The interference from other herbicides and ions on the stripping signals of both compounds was also evaluated. The described method was applied to estimate of the dinoseb and dinoterb in environmental samples.     

Salicylate ion-selective electrode based on new tetranuclear copper complexes of O-vannlin-methionine as neutral carriers.

A new salicylate-selective PVC membrane electrode based on a new Schiff base tetranuclear copper complex of O-vannlin-methionine (Cu(II)(4)-TVM) as a neutral carrier is described. This electrode displays a preferential potentiometric response to salicylate and an anti-Hofmeister selectivity sequence in the following order: Sal(-) > ClO(4)(-) > SCN(-) > I(-) > NO(2)(-) > NO(3)(-) > Br(-) > Cl(-) > SO(3)(2-) > SO(4)(2-) > H(2)PO(4)(-). The electrode exhibits near-Nernstian potential linear range of 1.5 x 10(-6)-1.0 x 10(-1) M with a detection limit of 8.0 x 10(-7) M and a slope of -56.3 mV/decade in pH 3.0-8.0 of phosphorate buffer solution at 20 degrees C. Thanks to the tetranuclear copper(II) in the carrier, the electrode has the advantages of simplicity, fast response, fair stability and reproducibility and low detection limit. The response mechanism to the electrodes is discussed by the a.c. impedance technique and the UV spectroscopy technique. The electrode can be applied to analyses of medicine and the results obtained are in fair agreement with the results given by a standard method.     

Preparation of tetraheptylammonium iodide-iodine graphite-multiwall carbon nanotube paste electrode: electrocatalytic determination of ascorbic acid in pharmaceuticals and foods

The present work describes the construction of a new modified graphite-multiwall carbon nanotube paste electrode by casting the appropriate mixture of tetraheptylammonium iodide-iodine as a new modifier. The modified paste electrode was used for the determination of ascorbic acid (AA) in a phosphate buffer solution (pH 2.0). When compared to activated carbon, a graphite and multiwall carbon nanotube paste electrode containing a new modifier, the proposed modified paste electrode not only shifted the oxidation potential of AA towards a less-positive potential but also enhanced its oxidation peak current. Further, the oxidation of AA was highly stable at the modified paste electrode. The optimum analytical conditions were sought. The current response of AA increases linearly while increasing its concentration from 5.6 × 10(-5) to 1.2 × 10(-2) M with a correlation coefficient of 0.9991; the detection limit (3σ) was found to be of 3.6 × 10(-5) M. The present modified paste electrode was also successfully used for the determination of AA in the presence of common interference compounds. The present modified electrode was successfully demonstrated towards the determination of AA in pharmaceutical and food samples.     

Fabrication of bulk-modified carbon paste electrode containing alpha-PW12O40(3-) polyanion supported on modified silica gel: Preparation, electrochemistry and electrocatalysis

Alpha-PW(12)O(40)(3-) (PW(12)) supported on the surface of silica gel derivatized by 3-aminopropyl(triethoxy)silane (devoted briefly as SiNH(3)PW(12)) was synthesized and used as bulk modifier to fabricate a renewable three-dimensional chemically modified electrode. The electrochemical behavior of the modified electrode was characterized by cyclic voltammetry. There is an ionic bonding character between PW(12) and the surface amino groups of modified silica, which greatly improves the stability of SiNH(3)PW(12)-modified carbon paste electrode due to insolubility of silica gel in water. The SiNH(3)PW(12) bulk-modified carbon paste electrode not only maintains the electrochemical activity of PW(12), but also exhibits remarkable advantages of renewability, as well as simple preparation and inexpensive material. The modified electrode offers an excellent and stable electrocatalytic response for the reduction of IO(3)(-) and hydrogen peroxide. The SiNH(3)PW(12)-CPE is successfully applied as an electrochemical detector to monitor IO(3)(-) in flow injection analysis (FIA). The catalytic peak current was found to be linear with the IO(3)(-) concentration in the range 5x10(-6) to 1x10(-3)molL(-1). The detection limit of the proposed method was found to be 3.1x10(-6)molL(-1) for IO(3)(-) determination.     

Voltammetric copper(II) determination with a montmorillonite-modified carbon paste electrode

The clay mineral montmorillonite has been tested as modifier for the carbon paste electrode with a novel electrode modification technique. The differential pulse voltammetric determination of copper(II) by means of this modified carbon paste electrode has been studied. A detection limit of 4x10(-8) mol/l has been achieved after 10 min preconcentration under open circuit conditions with subsequent anodic stripping voltammetry. The calibration curve for Cu(II) is linear in the range of 4x10(-8)-8x10(-7) mol/l. Pb interferes in a 10-fold molar and Cd and Hg in a 100-fold molar excess. The interference by humic ligands is significant.     

Voltammetric behavior and determination of 17 beta-estradiol at multi-wall carbon nanotube-Nafion modified glassy carbon electrode.

For the purpose of low cost and sensitive electrochemical detection of 17 beta-estradiol (E2), a multi-wall carbon nanotube (MWNT)-Nafion modified electrode was fabricated. The MWNT modified electrode shows enhancement for the anodic peak current of E2 compared with the value obtained using a bare electrode. The anodic peak current measured by square wave voltammetry after 5 min open-circuit accumulation was proportional to the concentration of E2 over the range of 2.5 x 10(-7) to 10 10(-6) M, and a detection limit of 1 x 10(-8) M was obtained.     

Voltammetric determination of cadmium(II) using a chemically modified electrode

An 1-(pyridylazo)-2-naphthol modified glassy carbon electrode has been investigated as sensor for the measurement of trace levels of Cd2+. Cd2+ is deposited on the surface of a PAN modified glassy carbon electrode at -1.10 V (vs. SCE) via forming Cd2+-PAN and subsequent reduction at the electrode. In the following step, Cd-PAN is oxidized, and voltammograms are recorded by scanning the potential in a positive direction. Calibration plots were found to be linear in the range 2 x 10(-8) mol/L to 8 x 10(-7) mol/L. The detection limit was 5 x 10(-10) mol/L, and the coefficient of variation, determined on one single electrode at a concentration of 5 x 10(-7) mol/L, was calculated to be 3.2% (n = 5). Using this new kind of modified electrode, trace levels of Cd(II) in water samples were determined; the average recovery was calculated to be 98.78%.     

Potentiometric carbon paste sensors for lead(II) based on dithiodibenzoic and mercaptobenzoic acids.

Dithiodibenzoic (DTB) acid and mercaptobenzoic (MB) acid were studied to characterize their abilities as modifier agents for lead(II) sensors. For both sensors, the best results were obtained with modified carbon paste electrodes with 24.1% of ligand. The pH influence on the potentiometric response was studied. The selectivity coefficients for both modified electrodes were tabulated. A potentiometric sensor based on DTB acid exhibited a more sensitive and selective response to lead ions than an MB electrode. The limits of detection for the DTB and MB electrodes were very similar, 5.01 x 10(-8) M and 3.98 x 10(-8) M, respectively, for lead(II) activity. The DTB sensor was applied to lead(II) ion determination in real samples and as an indicator electrode in potentiometric titrations. Natural and commercial humic acids were titrated using the DTB electrode to estimate the stability constant between these organic compounds and the lead(II) ions with successful results.     

Electrochemical determination of nitrite using a gold nanoparticles-modified glassy carbon electrode prepared by the seed-mediated growth technique.

Seed-mediated growth of gold nanoparticles on glassy carbon (GC) surfaces was developed. The field emission scanning electron microscopy (FE-SEM) and electrochemical characterization confirmed the effective attachment of gold nanoparticles on GC surface with such a wet-chemical method. The as-prepared gold nanoparticles attached glassy carbon electrode (Au/GCE) presented excellent catalytic ability toward the oxidation of nitrite. Compared with bare GCE and planar gold electrode, the Au/GCE obviously decreased the overpotential of nitrite oxidation and improved the peak current. The catalytic current was found to be linearly proportional to the nitrite concentration in the range of 1 x 10(-5) - 5 x 10(-3) M, with a detection limit of 2.4 x 10(-6) M. The Au/GCE was successfully applied to the electrochemical determination of nitrite in a real wastewater sample, showing excellent stability and anti-interference ability.     

Voltammetric determination of sinomenine in biological fluid using a glassy carbon electrode modified by a composite film of polycysteic acid and carbon nanotubes

Polycysteic acid based electrochemical oxidation of L-cysteine (CySH) and carbon nanotubes (CNTs) formed a composite thin film material at a glassy carbon electrode (GCE) that was used a novel modifier for electroanalytical determination of sinomenine which is used for rheumatoid arthritis treatment. The determination of sinomenine at the composite modified electrode was studied by differential pulse voltammetry (DPV). The peak current obtained at + 0.632 V (vs SCE) from DPV was linearly dependent on the sinomenine concentration in the range of 1.0 x 10(-7) to 6.0 x 10(-5) M in a B-R buffer solution (0.04 M, pH 1.81) with a correlation coefficient of 0.998. The detection limit (S/N = 3) was 5.0 x 10(-8) M. The electrochemical reaction mechanism of sinomenine was also discussed. This new method was then applied to the high-throughput determination of sinomenine in human serum samples with satisfactory results. This polycysteic acid/CNTs composite film may be considered to be a promising, low-cost, durable, and biocompatible material for the modification of sensors in applications to pharmaceutical and biomedical analysis.     

Poly(amidosulfonic acid) modified glassy carbon electrode for determination of isoniazid in pharmaceuticals

Amidosulfonic acid was electropolymerized by cyclic voltammetry onto the surface of glassy carbon electrode (GCE) to fabricate the chemically modified electrode, which showed high stability, good selectivity and reproducibility for determination of isoniazid. The modified electrode showed an excellent electrocatalytical effect on the oxidation of isoniazid. Under the optimum conditions, there was a good linear relationship between anodic peak current and isoniazid concentration in the range of 5.0 x 10(-8)- 1.0 x 10(-5) M, and a detection limit of 1.0 x 10(-8) M (S/N = 3) was obtained after 120 s at the accumulation potential of - 0.2 V (vs. SCE). This developed method had been applied to the direct determination of isoniazid in injection and tablet samples with satisfactory results.     

Flow-injection analysis method for the determination of nitrite and nitrate in natural water samples using a chemiluminescence NOx monitor.

A flow-injection analysis method for the determination of nitrite and nitrate in natural water samples has been developed that consists of two systems based on their reduction to NO with hydrazine and/or ascorbic acid, followed by chemiluminescence detection. The procedure of sweeping the generated NO into an NOx monitor, by means of a gas-liquid separating coil consisting of microporous polytetrafluoroethylene (PTFE) tubing, offers practical advantages. The adjustment of the carrier gas-flow rates could yield the same calibration graphs for the two measurement systems, and the accumulation sweeping mode provides a higher sensitivity. Chemiluminescence detection allows a wide linear calibration range of 5 x 10(-8) to 5 x 10(-5) M. The detection limits for nitrate and nitrite, defined as three-times the standard deviation of measurement blanks, are 2 x 10(-8) M and 1 x 10(-8) M, respectively, and the average precision was 3.2% at ambient natural concentration levels. Recovery tests were between 94% and 106% for a variety of natural water samples. The method is relatively free from interferences from the substances normally found in natural water, and only ferric ion has an effect for the nitrite determination.