Analysis of acrolein and acrylonitrile in aqueous solution by membrane introduction mass spectrometry

Acrolein and acrylonitrile can be quantified directly at low levels in aqueous solution using membrane introduction mass spectrometry. Electron impact was used to generate positively charged ions and electron capture of the O-(2,3,4,5,6-pentafluorobenzyl)hydroxyl amine (PFBOA) derivative was used to generate negatively charged ions of acrolein in aqueous solutions. The origins of all ions in the mass spectra and product MS/MS spectra recorded using both ionization methods were assigned and a reaction scheme is given which accounts for the fragmentation of the PFBOA derivative. Detection limits were measured using multiple reaction monitoring in both the methods. With electron capture detection, acrolein could be detected without preconcentration at 10 ppb levels. Electron impact ionization and multiple reaction monitoring both allowed the measurement of acrylonitrile at levels as low as 10 ppb.     

Characterization of low and intermediate molecular weight hydrogen silsesquioxanes by mass spectrometry

Hydrogen silsesquioxanes (HSQ or H-resin), represented by (HSiO3/2)2n or TH(2n), are an important class of polymers that have gained popularity as spin-on dielectrics by the electronic industry. Previously in the literature, small oligomeric species such as (HSiO3/2)2n, where n = 4-16, have been identified by GC-MS. However, nondestructive mass spectral results for larger H-resin molecules have not been reported, likely due to the nonpolar nature of these molecules. We have utilized a number of "soft" ionization techniques such as field desorption (FD), desorption chemical ionization (DCI), and matrix-assisted laser desorption/ionization (MALDI), and demonstrated that they are amenable to hydrogen silsesquioxanes. The [TH(2n) - H]+* ions were observed by FD-MS while [TH(2n) + NH4]+ and [TH(2n) + Na]+ ions were found utilizing DCI and MALDI, respectively. Based upon the MS results, the polymer compositions as well as molecular weight information can be easily obtained. The detailed structures of H-resin components, however, remain a difficult issue, which cannot be answered by MS data alone. With these preliminary MS results, we have clearly demonstrated that mass spectrometry with the above-mentioned ionization techniques is an invaluable tool that can be utilized when attempting to solve the challenge set forth by the complexity of hydrogen silsesquioxane materials.     

Recent advances in mass spectrometry analysis of low molecular weight heparins

Low molecular weight heparins (LMWHs) are the most widely used anticoagulant drugs produced by chemical or enzymatic modification of parent heparin polysaccharides. The present article reviews recent advances in orthogonal and complementary mass spectrometry (MS) methodologies towards complete elucidation of natural and modified structures in LMWHs that possibly affect the drug quality, safety and efficacy.     

Desorption electrospray ionisation mass spectrometry and tandem mass spectrometry of low molecular weight synthetic polymers

A range of low molecular weight synthetic polymers has been characterised by means of desorption electrospray ionisation (DESI) combined with both mass spectrometry (MS) and tandem mass spectrometry (MS/MS). Accurate mass experiments were used to aid the structural determination of some of the oligomeric materials. The polymers analysed were poly(ethylene glycol) (PEG), polypropylene glycol (PPG), poly(methyl methacrylate) (PMMA) and poly(alpha-methyl styrene). An application of the technique for characterisation of a polymer used as part of an active ingredient in a pharmaceutical tablet is described. The mass spectra and tandem mass spectra of all of the polymers were obtained in seconds, indicating the sensitivity of the technique.     

Environmental applications of membrane introduction mass spectrometry

The purpose of this review is to highlight the versatility of membrane introduction mass spectrometry (MIMS) in environmental applications, summarize the measurements of environmental volatile organic compounds (VOCs) accomplished using MIMS, present developments in the detection of semi-volatile organic compounds (SVOCs) and forecast possible future directions of MIMS in environmental applications.     

Detection of intact hemoglobin from aqueous solution with laser desorption mass spectrometry

Laser induced liquid beam ionization/desorption mass spectrometry (LILBID-MS) is a new desorption method recently developed in our laboratory. This method allows ions to be desorbed directly from the liquid phase into the high-vacuum region of a mass spectrometer. This method has now been applied to the detection of noncovalent protein-protein complexes. The example given in this paper is the quartenary complex of human hemoglobin. For the first time, the intact hemoglobin could be detected by laser desorption mass spectrometry. Furthermore, evidence for the specificity of the complex is given.     

On-line monitoring of chloramine reactions by membrane introduction mass spectrometry

Membrane introduction mass spectrometry has been applied to on-line monitoring of the reaction of monochloramine with hydrogen chloride. The detection limit for monochloramine introduced by a sheet-membrane direct-insertion probe and measured by electron impact ionization and selected ion detection was found to be 0.7 mg/l. Formation of dichloramine, trichloramine and molecular chlorine in response to the addition of hydrogen chloride to the monochloramine solution was measured on-line. The flow-through membrane introduction mass spectrometry method for detection of chloramines and characterization of their chemistry has minimal memory effects, high molecular specificity, high speed of analysis owing to fast response times, and low detection limits.     

Accurate mass measurement of low molecular weight compounds by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

We report the application of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) for the accurate measurement of mass of low molecular weight compounds (smaller than 1500 Da), a linear peptide, two types of cyclic depsipeptides, a polyhydroxy-macrocyclic lactone, and two prenylated flavonoids, with delayed extraction in the reflector mode. The performance of the MALDI-TOF instrument was less than those of fast atom bombardment and Fourier-transform ion cyclotron resonance mass spectrometry instruments and insufficient to give acceptable accuracy for literature reporting. Nevertheless, when combined with NMR spectrometry and/or amino acid analysis to give information on the numbers of carbon atoms and index of hydrogen deficiency, MALDI was useful for determination of the elemental composition of the low molecular weight compounds available in small quantities.     

Alternative CHCA-based matrices for the analysis of low molecular weight compounds by UV-MALDI-tandem mass spectrometry

Analysis of low molecular weight compounds (LMWC) in complex matrices by vacuum matrix-assisted laser desorption/ionization (MALDI) often suffers from matrix interferences, which can severely degrade limits of quantitation. It is, therefore, useful to have available a range of suitable matrices, which exhibit complementary regions of interference. Two newly synthesized α-cyanocinnamic acid derivatives are reported here; (E)-2-cyano-3-(naphthalen-2-yl)acrylic acid (NpCCA) and (2E)-3-(anthracen-9-yl)-2-cyanoprop-2enoic acid (AnCCA). Along with the commonly used α-cyano-4-hydroxycinnamic acid (CHCA), and the recently developed 4-chloro-α-cyanocinnamic acid (Cl-CCA) matrices, these constitute a chemically similar series of matrices covering a range of molecular weights, and with correspondingly differing ranges of spectral interference. Their performance was compared by measuring the signal-to-noise ratios (S/N) of 47 analytes, mostly pharmaceuticals, with the different matrices using the selected reaction monitoring (SRM) mode on a triple quadrupole instrument equipped with a vacuum MALDI source. AnCCA, NpCCA and Cl-CCA were found to offer better signal-to-noise ratios in SRM mode than CHCA, but Cl-CCA yielded the best results for 60% of the compounds tested. To better understand the relative performance of this matrix series, the proton affinities (PAs) were measured using the kinetic method. Their relative values were: AnCCA > CHCA > NpCCA > Cl-CCA. This ordering is consistent with the performance data. The synthesis of the new matrices is straightforward and they provide (1) tunability of matrix background interfering ions and (2) enhanced analyte response for certain classes of compounds.     

The kinetics of oxidation of low molecular weight aldehydes by potassium ferrate

Summary Oxidation of simple aldehydes is shown to follow a mixed order rate equation(¹), which contains three terms: the first, first order in the concentration of potassium ferrate (K₂FeO₄); the second, second order in K₂FeO₄; and the third contains the conditional rate constants which are substrate (aldehyde) concentration dependent. The third term is first order dependent on (K₂FeO₄). Aldehydes studied included chloral, acetaldehyde, and trimethylacetaldehyde.     

Determination of ammonia, ethanol and acetic acid in solution using membrane introduction mass spectrometry

Methods have been developed to allow applications of membrane introduction mass spectrometry (MIMS) to monitor solution phase components of fermentation broths using electron ionization. The solutions are transported by flow injection analysis (FIA) through a direct insertion membrane probe, fitted with a silicone membrane in the sheet configuration. Analytes of interest pass through the membrane and are ionized by electron implant ionization. The compounds monitored are ammonia, acetic acid, and ethanol, with ammonia being detected as the monochloramine derivative which is generated at pH 10 upon addition of hypochlorite. Quantitation is achieved using external standard solutions. The dynamic range for the quantification of ammonia is 2-8000 ppm, and for ethanol and acetic acid 10-1000 ppm. This method provides rapid detection of analytes of interest, on-line monitoring capabilities, and the advantage of electron ionization. The introduction of samples into the mass spectrometer is achieved readily and automatically, the response time is a few seconds, and there are no memory effects.     

Weak alkali and alkaline earth metal complexes of low molecular weight ligands in aqueous solution

This work is aimed at reviewing the chemical literature dealing with thermodynamic aspects of the weak complex formation (species with log K values less than about 3) between alkali and alkaline earth metal ions with low molecular weight inorganic and organic ligands in aqueous solution. The following ligands (up to hexavalent anions) were examined in detail: (i) hydroxide, chloride, sulfate, carbonate and phosphate as inorganic, and (ii) carboxylates, amines, amino acids, complexones and nucleotides as organic ligands. The paper also identifies the main reasons responsible for the dispersion of the stability data on ion pairs in the literature. When possible, the trend of stability for the different metal ions interacting with the same ligand will be considered to find predictive interaction relationships. Since the stability of weak alkali and alkaline earth metal complexes are mainly due to electrostatic interaction, simple empirical relationships were obtained between log K and the charge of the anionic ligand. The interest for alkali and alkaline earth cations rises since they are used in study of basic science as components of the supporting electrolyte and are widely diffused in natural fluids. Some examples of application of this science were presented too, to show the role of weak complex formation in the modelling process of natural systems.     

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry studies of low molecular weight dendrimers

We report the application of matrix-assisted laser desorption/ionization time-of-flight (MALDI-ToF) mass spectrometry, with delayed extraction in the reflectron mode, for the characterization of low molecular weight dendrimers. 20 dendrimer samples were measured and 4 typical dendrimers, as examples, are discussed in detail. Several factors that affect the analysis including the matrices used, the concentrations of sample, the solvents and cationization reagent used, were investigated in detail. Experimental results indicate that the type of solvent can greatly influence exact mass measurement. However, sample preparation is generally not very critical for dendrimer analysis using MALDI-ToF since many kinds of matrices and a wide range of sample concentrations can be used efficiently. In addition, the Cs(+) ion can be used to enhance the efficiency of cationization. Some reasons for this behavior are discussed on the basis of results of calculations using Gaussian94 software (a connected system of programs for performing a variety of semi-empirical and ab initio molecular orbital (MO) calculations).     

Analysis of low molecular weight acids by negative mode matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Free 9-aminoacridine base is demonstrated to be a suitable matrix for negative mode matrix-assisted laser desorption/ionization time-of-flight mass spectrometric (MALDI-TOFMS) analysis of a wide range of low molecular weight organic acids including aliphatic (from acetic to palmitic acid), aromatic acids, phytohormones (e.g. jasmonic and salicylic acids), and amino acids. Low limits of quantitation in the femtomolar range (jasmonic - 250 fmol; caffeic - 160 fmol and salicylic - 12.5 fmol) and linear detector response over two concentration orders in the pico- and femtomolar range are extremely encouraging for the direct study of such acids in complex biological matrices.     

Improved detection of low vapor pressure compounds in air by serial combination of single-sided membrane introduction with fiber introduction mass spectrometry (SS-MIMS-FIMS)

The use of two methods in tandem, single-sided membrane introduction mass spectrometry (SS-MIMS) and fiber introduction mass spectrometry (FIMS), is presented as a technique for field analysis. The combined SS-MIMS-FIMS technique was employed in both a modified commercial mass spectrometer and a miniature mass spectrometer for the selective preconcentration of the explosive simulant o-nitrotoluene (ONT) and the chemical warfare agent simulant, methyl salicylate (MeS), in air. A home-built FIMS inlet was fabricated to allow introduction of the solid-phase microextraction (SPME) fiber into the mass spectrometer chamber and subsequent desorption of the trapped compounds using resistive heating. The SS-MIMS preconcentration system was also home-built from commercial vacuum parts. Optimization experiments were done separately for each preconcentration system to achieve the best extraction conditions prior to use of the two techniques in combination. Improved limits of detection, in the low ppb range, were observed for the combination compared to FIMS alone, using several SS-MIMS preconcentration cycles. The SS-MIMS-FIMS response for both instruments was found to be linear over the range 50 to 800 ppb. Other parameters studied were absorption time profiles, effects of sample flow rate, desorption temperature, fiber background, memory effects, and membrane fatigue. This simple, sensitive, accurate, robust, selective, and rapid sample preconcentration and introduction technique shows promise for field analysis of low vapor pressure compounds, where analyte concentrations will be extremely low and the compounds are difficult to extract from a matrix like air.     

Determination of low molecular weight organic acids in soil solution by HPLC

An HPLC method employing an ion exclusion column was developed for the determination of low molecular weight organic acids in soil solution. The method includes extensive sample pretreatment using ultrafiltration and cation exchange. The method showed linear calibration graphs (r>0.99) and the limits of detection in the range 0.1-26 muM. The recovery of eleven added acids ranged from 89 to 102%. Soil solutions of five horizons of a podzolised soil were analysed. The results showed that these compounds made up 1-3% of the dissolved organic carbon and 0-14% of the acidity. Identification of the major acids was also carried out by capillary zone electrophoresis.     

Secondary ion formation of low molecular weight organic dyes in time-of-flight static secondary ion mass spectrometry

Time-of-flight static secondary ion mass spectrometry (TOF-S-SIMS) was used to characterize thin layers of oxy- and thiocarbocyanine dyes on Ag and Si. Apart from adduct ions a variety of structural fragment ions were detected for which a fragmentation pattern is proposed. Peak assignments were confirmed by comparing spectra of dyes with very similar structures. All secondary ions were assigned with a mass accuracy better than 50 ppm. The intensity of molecular ions as well as fragment ions has been studied as a function of the type of organic dye, the substrate, the layer thickness and the type of primary ion. A large yield difference of two orders of magnitude was observed between the precursor ions of cationic carbocyanine dyes and the protonated molecules of the anionic dyes. Fragment ions, on the other hand, yielded similar intensities for both types of dye. As the dye layers deposited on an Ag substrate yielded higher secondary ion intensities than those deposited on a Si substrate, the Ag metal clearly acts as a promoting agent for secondary ion formation. The effect was more pronounced for precursor signals than for fragment ions. The promoting effect decreased as the deposited layer thickness of the organic dye layer was increased.     

Determination of pentachlorophenol by negative ion chemical ionization with membrane introduction mass spectrometry

Pentachlorophenol (PCP) was used as a model compound to explore the potential of desorption chemical ionization (DCI) in the determination of polychlorinated pesticides using membrane introduction mass spectrometry (MIMS). A direct insertion membrane probe was modified so that a chemical ionization plasma could be established at the membrane surface. Using selected ion monitoring (SIM) in a tandem triple quadrupole mass spectrometer with isobutane chemical ionization (CI), the PCP detection limit under positive chemical ionization is 20 ppb whereas negative CI gives detection limits in the low ppb range. This performance is achieved without any pre-treatment or derivatization of the sample. Negative ion CI gives a signal that is linear over a concentration range of 2-1000 ppb. Comparison of data obtained with low ppb samples of 2,4,6-trichlorophenol, 2,3,4,6-tetrachlorophenol and pentachlorophenol suggests that the sensitivity of this analytical procedure increases with increase in the number of electronegative substituents in the molecule.