Determination of a ternary mixture of penicillin-G sodium salt, penicillin-G procain salt and dihydrostreptomycin sulphate, by third-derivative spectrophotometry

Ternary mixtures of antibiotics, i.e. penicillin-G sodium salt, penicillin-G procain salt and dihydrostreptomycin sulphate salt, are assayed by 'zero-crossing' third-derivative spectrophotometry. Calibration plots follows Beer's law up to 40 mug/ml of penicillin-G sodium at 222.5 nm (r = 0.9997), 46 mug/ml of penicillin-G procain at 217 nm (r = 0.9999) and 36 mug/ml of dihydrostreptomycin sulphate at 211.5 nm (r = 0.9999), in the presence of one another. Detection limits at p = 0.05 level of significance were calculated to be, respectively, 0.66, 0.41 and 0.25 mug/ml. The procedure is rapid, simple, nondestructive and does not require solution of equations. The method was successfully applied for determining laboratory mixtures and commercial injections.     

Determination of Ternary Mixtures of Vitamins by Ratio-Spectra Zero-Crossing Derivative Spectrophotometry

Abstract

The ratio-spectra zero-crossing first and third derivative spectrophotometry have been used for determining ternary mixtures of Vitamin 86, Vitamin B1 and Vitamin B12. The procedures are accurate, nondestructive and do not require solving of equations.

In both methods, calibration graphs are linear, with zero-intercept, up to 48 μg/ml of Vitamin B6, 64 μg/ml of Vitamin B1 and 60 μg/ml of Vitamin B12. Correlation coefficients range from 0.9999 to 1.0000.

Working wavelengths, 311, 272.5 and 215.5 nm, respectively, in the 1st-derivative mode and 300.5, 271.5 and 365 nm in the 3rd-derivative mode. Detection limits for each drug at p=0.01 level of significance were calculated to be 0.002, 0.009 and 0.004 μg/ml and 0.002, 0.004 and 0.001 μg/ml, in the first and third-derivative methods, respectively. Both methods apply favourably to either synthetic mixtures or commercial injections for these drugs.

An exhaustive statistical treatment of the experimental findings was performed to confirm the validity of the methods.     

Determination of sulphamethizole in the presence of nitrofurantoine by derivative spectrophotometry and ratio spectra derivative

Two methods for determining sulphamethizol in the presence of nitrofurantoine in mixtures by first-derivative spectrophotometry and by the first derivative of the ratio spectra are described. The procedures do not require any separation step. In the first method the measurements are obtained in the zero-crossing wavelengths and the calibration graphs were linear up to 32 mug/ml of sulphamethizole at 251 and 278.5 nm. In the second method, the calibration graphs were linear up to 43 mug/ml by measuring at the maximum (263 nm), at the minimum (244 nm) and peak to peak. The methods were applied for determining sulphamethizole in a pharmaceutical product containing nitrofurantoine.     

Determination of diazepam and otilonium bromide in pharmaceuticals by ratio-spectra derivative spectrophotometry

Binary mixtures of diazepam and otilonium bromide are analyzed by ratio-spectra first- and second-derivative spectrophotometry. The procedures are accurate, non-destructive and do not require any separation step. Calibration graphs are linear with zero-intercept up to 50 μg/ml, r ranging from 0.9996 to 0.9999. Working wavelengths in the first- and second-derivative mode, respectively, are: diazepam 247 nm and 231 nm, otilonium bromide 262 nm and 226 nm. Limits of detection (LOD) are 0.30 and 0.12 μg/ml for diazepam and 0.063 and 0.30 μg/ml for otilonium bromide. The methods were successfully applied for determining the two drugs in laboratory mixtures and in pharmaceutical products. Received: 5 August 1996 / Revised: 16 September 1996 / Accepted: 18 September 1996     

Determination of diazepam and otilonium bromide in pharmaceuticals by ratio-spectra derivative spectrophotometry

Binary mixtures of diazepam and otilonium bromide are analyzed by ratio-spectra first- and second-derivative spectrophotometry. The procedures are accurate, non-destructive and do not require any separation step. Calibration graphs are linear with zero-intercept up to 50 μg/ml, r ranging from 0.9996 to 0.9999. Working wavelengths in the first- and second-derivative mode, respectively, are: diazepam 247 nm and 231 nm, otilonium bromide 262 nm and 226 nm. Limits of detection (LOD) are 0.30 and 0.12 μg/ml for diazepam and 0.063 and 0.30 μg/ml for otilonium bromide. The methods were successfully applied for determining the two drugs in laboratory mixtures and in pharmaceutical products. Received: 5 August 1996 / Revised: 16 September 1996 / Accepted: 18 September 1996     

Spectrophotometric multicomponent determination of sunset yellow, tartrazine and allura red in soft drink powder by double divisor-ratio spectra derivative, inverse least-squares and principal component regression methods

Double divisor-ratio spectra derivative (graphical method), classical least-squares and principal component regression (two numerical methods) methods were developed for the spectrophotometric multicomponent analysis of soft drink powders and synthetic mixtures containing three colorants without any chemical separation. The graphical method is based on the use of derivative signals of the ratio spectra using double divisor. In this method, the linear determination ranges were 2-8 mug ml(-1) sunset yellow, 4-18 mug ml(-1) tartrazine and 2-8 mug ml(-1) allura red in 0.1 M HCl. In the numerical methods, a training set was randomly prepared by using 18 samples containing between 0 and 8 mug ml(-1) of sunset yellow, 0-18 mug ml(-1) of tartrazine and 0-8 mug ml(-1) of allura red. The chemometric calibrations were calculated by using the prepared training set and its absorbances at seven points (from 375.0 to 550.0 nm) in the spectral region 325-584 nm. The proposed methods were validated by using synthetic ternary mixtures and applied to the simultaneous determination of three colorants in soft drink powders. The obtained results were statistically compared with each other.     

Simultaneous determination of tartrazine and sunset yellow by derivative spectrophotometry and ratio spectra derivative

Two methods for determining Tartrazine and Sunset Yellow in mixtures by first derivative spectrophotometry and by first derivative of the ratio spectra are described. The procedures do not require any separation step. By the first method, the measurements are obtained in the zero-crossing wavelengths and the calibration graphs are linear up to 20 microg/ml of Tartrazine and up to 40 microg/ml of Sunset Yellow. The determinations of Tartrazine and Sunset Yellow are also done by the first derivative of the ratio spectra. The methods are applied for determining both compounds in four commercial food products.     

A rapid derivative spectrophotometric method for simultaneous determination of naphazoline and antazoline in eye drops

A zero-crossing first-derivative spectrophotometric method is applied for the simultaneous determination of naphazoline hydrochloride and antazoline phosphate in eye drops. The measurements were carried out at wavelengths of 225 and 252 nm for naphazoline hydrochloride and antazoline phosphate, respectively. The method was found to be linear (r2>0.999) in the range of 0.2-1 microg/ml for naphazoline hydrochloride in the presence of 5 microg/ml antazoline phosphate at 225 nm. The same linear correlation (r2>0.999) was obtained in the range of 1-10 microg/ml of antazoline phosphate in the presence of 0.5 microg/ml of naphazoline hydrochloride at 252 nm. The limit of determination was 0.2 microg/ml and 1 microg/ml for naphazoline hydrochloride and antazoline phosphate, respectively. The method was successfully used for simultaneous analysis of naphazoline hydrochloride and antazoline phosphate in eye drops without any interference from excipients and prior separation before analysis.     

高效液相色谱二极管阵列检测法同时测定丹参滴注液中四种水溶性成分的含量

建立了高效液相色谱二极管阵列检测(HPLC-DAD)法同时测定丹参滴注液中丹参素、原儿茶醛、迷迭香酸和丹酚酸B四种水溶性成分的含量。采用DiamonsilTMC18色谱柱(250×4.6 mm,5μm),以甲醇和5%冰乙酸为流动相进行梯度洗脱,流速为1.0mL/min,柱温30℃,检测波长为286 nm。在此色谱条件下四种水溶性成分可完全分离。丹参素、原儿茶醛、迷迭香酸和丹酚酸B的线性范围分别为0.2192~1.934μg(r=0.9999),0.03508~0.2456μg(r=1.0000),0.2592~1.814μg(r=1.0000),0.3864~2.705μg(r=0.9999)。平均回收率丹参素为102.6%,相对标准偏差(RSD)为0.55%;原儿茶醛为103.5%,RSD为0.42%;迷迭香酸为99.8%,RSD为0.68%;丹酚酸B为102.8%,RSD为0.49%。该方法简单、快速,四组分分离良好,可用于丹参滴注液的质量控制。     

Simultaneous determination of manganese and zinc in mixtures using first- and second-derivative spectrophotometry

A new direct spectrophotometric determination of manganese with 5,8-dihydroxy-1,4-naphthoquinone (naphthazarin,NAZA) is reported. Absorption maximum, molar absorptivity and Sandell's sensitivity of 1:2 (M:L) complex are 695 nm, 1.88x10(4) l mol(-1) cm(-1) and 2.92 ng cm(-2), respectively. A linear calibration graph is obtained up to a concentration of 7.2 mug ml(-1) of manganese. The optimum range for determination (Ringbom) is between 0.20 and 6.8 mug ml(-1). A rapid method for simultaneous determination of manganese and zinc in their mixture using derivative spectra is described. The range 0.28-5.6 mug ml(-1) manganese could be determined in the presence of 0.33-6.8 mug ml(-1) zinc and vice versa. The developed method was applied to the simultaneous spectrophotometric determination of manganese and zinc in some synthetic mixtures and was found to give satisfactory results.     

Simultaneous determination of cyproterone acetate and ethinylestradiol in tablets by derivative spectrophotometry

Derivative spectrophotometry offers a useful approach for the analysis of drugs in multi-component mixtures. In this study a third-derivative spectrophotometric method was used for simultaneous determination of cyproterone acetate and ethinylestradiol using the zero-crossing technique. The measurements were carried out at wavelengths of 316 and 226 nm for cyproterone acetate and ethinylestradiol respectively. The method was found to be linear (r2>0.999) in the range of 0.5-6 mg/100 ml for cyproterone acetate in the presence of 35 microg/100 ml ethinylestsradiol at 316 nm. The same linear correlation (r2>0.999) was obtained in the range of 10-80 microg/100 ml of ethinylestradiol in the presence of 2 mg/100 ml of cyproterone acetate at 226 nm. The limit of determination was 0.5 mg/100 ml and 10 microg/100 ml for cyproterone acetate and ethinylestradiol respectively. The method was successfully applied for simultaneous determination of cyproterone acetate and ethinylestradiol in pharmaceutical preparations without any interferences from excipients.     

Determination of mixtures of ampicillin and cloxacillin in pharmaceuticals by second-derivative spectrophotometry

Mixtures of ampicillin-Na and cloxacillin-Na are assayed by peak-to-baseline and zero-crossing second-derivative spectrophotometry. The procedure does not require any separation step. Calibration plots are linear (r = 0.9999) up to 30 μg ml^?1 of ampicillin-Na at 216 nm and up to 40 μg ml^?1 ampicillin-Na or cloxacillin-Na at 228 nm or 248.8 nm, respectively, in the presence of one another. Detection limits at the p = 0.05 level of significance, range from 0.15 pg ml^?1 to 0.33 μg ml^?1. The method was successfully applied to commercial injections and capsules containing these penicillins.     

Simultaneous determination of gallium(III) and indium(III) by derivative spectrophotometry

A simple, selective and sensitive derivative spectrophotometric method is proposed for the simultaneous determination of gallium(III) and indium(III) in mixtures using 1-(2-pyridylazo)-2-naphthol in cationic micellar medium, without any prior separation. Beer's law is obeyed between 2.80x10(-1)-3.63 and 4.60x10(-1)-9.20 mug ml(-1) concentration of Ga(III) and In(III) at 550 and 542 nm, the isodifferential points of indium and gallium complexes in the first-order derivative mode, respectively. The proposed method is successfully applied for the determination of gallium and indium in standard reference materials and synthetic binary mixtures with a relative error of +/-2.07 and +/-2.55%, respectively.     

A comparative study on various spectrometries with thin layer chromatography for simultaneous analysis of drotaverine and nifuroxazide in capsules

Three spectrophotometric methods including Vierordt's method, derivative, ratio spectra derivative, and thin layer chromatography (TLC)-UV densitometric method were developed for simultaneous determination of drotaverine HCl (DRT) and nifuroxazide (NIF) in presence of its impurity, 4-hydroxybenzohydrazide (4-HBH). In Vierordt's method, (E(1 cm)(1%)) values were calculated at 227 and 368 nm in the zero-order spectra of DRT and NIF. By derivative spectrophotometry, the zero-crossing method, drotaverine HCl was determined using the second derivative at 245 nm and the third derivative at 238 nm, while nifuroxazide was determined using the first derivative at 399 nm and the second derivative at 411 nm. The ratio spectra derivative spectrophotometry is basedon the measure of the amplitude at 459 nm for DRT and at 416 nm for NIF in the first derivative of the ratio spectra. Calibration graphs of the three spectrophotometric methods were plotted in the range 1-10 mug/ml of DRT and 2-20 mug/ml of NIF. TLC-UV densitometric method was achieved on silica gel plates using ethyl acetate : methanol : ammonia 33% (10 : 1 : 0.1 v/v/v) as the mobile phase. The Rf values were 0.74, 0.50, 0.30+/-0.01 for DRT, NIF and 4-HBH, respectively. On the fluorescent plates, the spots were located by fluorescence quenching and the densitometrical area were measured at 308 and 287 nm with linear range 0.2-4 mug/spot and 0.6-12 mug/spot for DRT and NIF, respectively. The proposed methods have been successfully applied to the commercial pharmaceutical formulation without any interference of excipients. Mean recoveries, relative standard deviations and the results of the proposed methods were compared with those obtained by applying the alternate methods.     

Analysis of digoxin at therapeutic concentrations using high-performance liquid chromatography with post-column derivatization

A high-performance liquid chromatographic (HPLC) procedure has been developed for the analysis of digoxin in plasma at therapeutic concentrations. The assay method provides resolution of digoxin from its metabolites using a 15 cm X 4.6 mm HPLC column containing 3-micron octadecylsilane-bonded stationary phase. The effluent of the column is passed through a post-column reactor in which a fluorescent derivative is formed by the co-addition of hydrochloric acid and dehydroascorbic acid. Detection of the derivative is accomplished in a fluorometer with excitation at 336 nm and emission at 425 nm. The extraction efficiency for recovery of digoxin from plasma samples was 70% using chloroform-isopropanol (9:1) following a pre-wash with isooctane to remove endogenous substances. The calibration curve was linear (r = 0.9999) over the range 0.5-4 ng/ml digoxin in plasma using digitoxigenin as internal standard. The minimum detectable quantity of digoxin in plasma was 0.5 ng/ml at a signal-to-noise ratio of 4:1. Split-samples of digoxin control sera were assayed by the HPLC procedure and by the prescribed radioimmunoassay procedure. Excellent correlation was observed between the two methods (r = 0.999). No interference was noted when a selection of commonly co-prescribed drugs were evaluated for chromatographic co-elution or interference in detection with that of digoxin or the internal standard.     

Determination of nebivolol hydrochloride and hydrochlorothiazide in tablets by first-order derivative spectrophotometry and liquid chromatography

Two simple and accurate methods for analysis of nebivolol hydrochloride (NEB) and hydrochlorothiazide (HCTZ) in their combined dosage forms were developed using first-order derivative spectrophotometry and reversed-phase liquid chromatography (LC). NEB and HCTZ in their combined dosage forms (tablets) were quantified using first-derivative responses at 294.6 and 334.6 nm in the spectra of their solutions in methanol. The calibration curves were linear in the concentration range of 8-40 microg/mL for NEB and 10-60 microg/mL for HCTZ. LC analysis was performed on a Phenomenex Gemini C18 column (250 x 4.6 mm id, 5 microm particle size) in the isocratic mode with 0.05 M potassium dihydrogen phosphate-acetonitrile-methanol (30 + 20 + 50, v/v/v; pH 4) mobile phase at a flow rate of 1 mL/min. Detection was made at 220 nm. Both of the drugs and the internal standard (ezetimibe) were well resolved with retention times of 5.1 min for NEB, 2.9 min for HCTZ, and 8.2 min for ezetimibe. The calibration curves were linear in the concentration range of 1-14 microg/mL for NEB and 0.3-28 microg/mL for HCTZ. Both methods were validated and found to be accurate, precise, and specific, and results were compared statistically. Developed methods were successfully applied for the estimation of NEB and HCTZ in their combined dosage forms.     

First derivative of the ratio spectra method for resolving iodide and thiocyanate in binary mixtures

A new method is described to analyse the binary mixture of iodide (I(-)) and thiocyanate (SCN(-)) ions, using the first derivative of the ratio spectra obtained by mathematical treatment of the data. The method is based on the formation of mixed ligand complexes between benzohydroxamic acid (BHA), vanadium (V) and I(-) or SCN(-) and their extraction in ammonium quaternary salt dissolved in toluene. Calibration graphs for 2-9 mug/ml of I(-) and for 2-6 mug ml of SCN(-) were established by measuring the analytical signals at 376 nm for I(-) and at 400.6 nm for SCN(-). The method has been applied for determining both ions in waste water of an power station at ng/ml levels after a preconcentration step with C(18), without any separation step.     

Stability indicating HPLC method for the simultaneous determination of moxifloxacin and prednisolone in pharmaceutical formulations

ABSTRACT: BACKGROUND: A simple, specific, and fast stability indicating reverse phase liquid chromatographic method was established for instantaneous determination of moxifloxacin and prednisolone in bulk drugs and pharmaceutical formulations. RESULTS: Optimum chromatographic separations among the moxifloxacin, prednisolone and stressinduced degradation products were achieved within 10 minutes by use of BDS Hypersil C8 column (250 X 4.6 mm, 5 mum) as stationary phase with mobile phase consisted of a mixture of phosphate buffer (18 mM) containing 0.1% (v/v) triethylamine, at pH 2.8 (adjusted with dilute phosphoric acid) and methanol (38:62 v/v) at a flow rate of 1.5 mL min-1. Detection was performed at 254 nm using diode array detector. The method was validated in accordance with ICH guidelines. Response was a linear function of concentrations over the range of 20-80 mug mL-1 for moxifloxacin (r2 [greater than or equal to] 0.998) and 40-160 mug mL-1 for prednisolone (r2 [greater than or equal to] 0.998). The method was resulted in good separation of both the analytes and degradation products with acceptable tailing and resolution. The peak purity index for both the analytes after all types of stress conditions was [greater than or equal to] 0.9999 indicated a complete separation of both the analyte peaks from degradation products. The method can therefore, be regarded as stabilityindicating. CONCLUSIONS: The developed method can be applied successfully for simultaneous determination of moxifloxacin and prednisolone in pharmaceutical formulations and their stability studies.     

A graphical derivative approach to the photometric determination of lutetium and praseodymium in mixtures

The reaction of lanthanides with 1,4-dihydroxyanthraquinone has been examined and optimum conditions have been found for the separate spectrophotometric determination of Lu and Pr. A graphical method based on use of first and second derivative spectra has been developed for analysis of binary mixtures of the two, in concentration ratios from 1:5 to 5:1. Linear calibration curves were obtained between 1 and 10 mug/ml.     

A new spectrophotometric method for quantitative multicomponent analysis resolution of mixtures of salicylic and salicyluric acids

A new spectrophotometric method for resolving binary mixtures is proposed. The method is based on use of the first derivative of the ratios of spectra. The absorption spectrum of the mixture is obtained and the amplitudes at appropriate wavelengths are divided by the corresponding amplitudes in the absorption spectrum of a standard solution of one of the components, and the first derivative of the ratio spectrum is obtained. The concentration of the other component is then determined from a calibration graph. The method has been applied for resolving binary mixtures of salicylic and salicyluric acids. Calibration graphs for 2.6-52 ppm salicylic acid and for 2.1-42 ppm salicyluric acid were established by measuring the analytical signals at the maximum at 241.5 nm (for salicylic acid) and from the peak at 258 nm to the trough at 247 nm (for salicyluric acid) in the first derivative ratio spectra.