Determination of mercury, selenium, bismuth, arsenic and antimony in human hair by microwave digestion atomic fluorescence spectrometry

A novel method for determination of Hg, Se, Bi, As and Sb based on microwave digestion followed by continuous flow vapour generation atomic fluorescence spectrometry was developed. The digestion for Hg was based on a two stage digestion involving HNO(3) and H(2)O(2), whilst for the hydride forming elements a common digestion using HCl and H(2)O(2) was found to be the most effective. The instrumentation and chemistry were optimised in order to provide the best accuracy and precision. The method detection limit for hair samples was found to be 0.2 ng g(-1) for Hg and between 2 and 10 ng g(-1) for the hydride forming elements. The atomic fluorescence detector showed excellent linearity over the concentration ranges studied with linear correlation co-efficients between 0.99984 and 0.99997. To validate the accuracy of the method a human hair certified reference material (GBW 0706) was analysed and excellent agreement with the certified value was obtained for all elements.     

Distillation, on-line RP C18 preconcentration and HPLC-UV-PCO-CVAAS as a new combination for the determination of methylmercury in sediments and fish tissue

Distillation as a way of sample digestion has been combined with on-line RP C18 preconcentration and HPLC-UV-PCO-CVAAS (high performance liquid chromatography — ultra violet — post column oxidation — cold vapour atomic absorption spectrometry) for the determination of methylmercury at back-ground levels in sediments, soils and fish tissue. To prove the accuracy of this method, it was applied to sediment and fish tissue reference materials. The results correspond with the reference values within their error ranges. Excellent recoveries (92–95%) were obtained for the sediment samples by means of the standard addition method. The standard deviations of the sediment samples were within an acceptable range (7.2–12.5%), those of the fish samples were substantially lower (3.4–5.0%). The detection limit is 0.04 ng/g for 1 g sample weight.     

Comparison of open and closed focussed microwave digestions in view of total mercury determination by cold vapour atomic absorption spectrometry

Food samples digestion, in view to quantify total mercury, is the first step to perform before measuring mercury by cold vapour atomic absorption spectrometry (CVAAS).We have compared two microwave digestion systems, one working at atmospheric pressure (open system) and the other one under pressure (closed system). Results obtained for fish muscle samples by the two methods are in good agreement. However, fat is not digested in the open system, whereas in the closed system no more fat remains in the final solution. During the quantification step, applying the CVAAS technique, we have noticed that the choice and the concentration of the reductant solution is very important to obtain good results. Elaborated methods have been validated using certified reference materials.     

Determination of trace metallic impurities in high-purity quartz by ion chromatography

A method has been developed for the determination of relevant trace impurities (alkali, alkaline and transition metals) in high purity quartz by ion-chromatography. In situ reagent (HF) purification and simultaneous sample dissolution was achieved in a multichannel vapour phase digestion assembly. Twenty-one samples can be digested at a time in this vapour phase system. Significant decrease in the process blank levels for all the analytes was observed. Drastic reduction (250 times) of NH4+ blank was achieved in the described vapour phase digestion, which enables the determination of trace concentration of sodium in high purity quartz. After volatilisation of the matrix and unreacted HF, the clear water leached solutions were injected into an ion-chromatograph equipped with conductivity detector for the determination of alkali and alkaline earth metals. In the case of transition metals, the trace residues were leached with 10 mM HCl and after separation on a mixed bed analytical column (IonPac CS5) were detected by spectrophotometry after post column derivatisation using 4-(2-pyridylazo)resorcinol (PAR). The accuracy of the result was checked by their comparison with those obtained by independent methods like inductively coupled plasma (ICP) MS and ICP atomic emission spectrometry. The achievable detection limits are between 0.4 ng/g (Li) and 22 ng/g (Mn). The application of the method to the determination of the above trace metals in two high-purity-grade quartz samples is demonstrated.     

Comparison of Pyrolysis and Microwave Acid Digestion Techniques for the Determination of Mercury in Biological and Environmental Materials

 Microwave digestion reduction-aeration and pyrolysis combined with cold vapour atomic absorption and cold vapour atomic fluorescence are compared for the determination of total mercury in several biological and environmental matrices. The biological samples were digested in a mixture of HNO₃/H₂O₂, the environmental samples in a mixture of HNO₃/HClO₄. After reduction with SnCl₂, the mercury was collected by two-stage gold amalgamation. After microwave digestion reduction-aeration, detection limits of 1.4 ng g⁻¹ and 0.6 ng g⁻¹ were obtained for cold vapour atomic absorption spectrometry (CVAAS) and cold vapour atomic fluorescence spectrometry (CVAFS), respectively, for 250 mg of environmental samples. For biological samples (500 mg) the detection limits were 0.7 ng g⁻¹ (CVAAS) and 0.4 ng g⁻¹ (CVAFS). After pyrolysis, detection limits of 3.5 ng g⁻¹ and 1.6 ng g⁻¹ for CVAAS and CVAFS, respectively, were obtained for a 10 mg sample. Pyrolysis can only be applied when the organic content of the sample is not too high. Accurate results were obtained for 8 certified reference materials of both environmental and biological origin. In addition, a real sludge sample was analysed. Author for correspondence. E-mail: richard.dams@rug.ac.be Received September 18, 2002; accepted December 3, 2002 Published online May 5, 2003     

Working Methods Paper: Certification of methylmercury compounds concentration in marine sediment reference material,IAEA-356

An intercomparison exercise was organized between seven laboratories using various isolation procedures (extraction, distillation, ion-exchange and alkaline digestion) and detection systems (CV AAS, cold vapour atomic absorption spectroscopy; CV AFS, cold vapour atomic fluorescence spectroscopy; GC, ECD, gas chromatography electron capture detector and HPLC with CV AFS detection) for determination of methylmercury compounds in sediment sample. All certification criteria were fulfilled and therefore the value for total concentration of methylmercury compounds was certified to be 5.46 ng g^?1, with a 95% confidence interval from 4.07–5.84 ng g^?1. The acceptable range, calculated as two times the confidence interval of the mean is therefore from 4.68–6.23 ng g^?1. This is the first sediment reference material ever to be certified for concentration of methylmercury compounds. Comparison of the data obtained by various methodologies has shown that the most critical step is the isolation of methylmercury compounds from binding sites. Acid leaching only cannot release methylmercury compounds quantitatively. Total release of methylmercury compounds could only be achieved by alkaline digestion or distillation. This simple intercomparison exercise has shown that since large numbers of laboratories world-wide are performing methylmercury compound analyses using various improved and specific separation methods and sensitive detection systems, certification of methylmercury compounds in different biological and environmental samples should not be a problem in the future.     

Certification of total mercury and methylmercury concentrations in mussel homogenate (Mytilus edulis) reference material, IAEA-142

Due to the increased demand for new reference materials certified for total and methylmercury (MeHg) a sample of mussel homogenate (IAEA-142) has been prepared. Thirteen experienced laboratories reported results for total Hg of which 9 laboratories also reported results for MeHg content. Laboratories reporting MeHg results used various isolation techniques (solvent extraction, saponification, acid leaching, ion-exchange separation, and distillation) and detection systems (cold vapour atomic absorption spectrometry (CV AAS), cold vapour atomic fluorescence spectrometry (CV AFS), gas chromatography with electron capture detector (GC/ECD) and HPLC with CV AAS detector). In the case of total Hg, most of the laboratories used acid digestion, only two used alkaline dissolution, followed either by CV AAS or CV AFS. One laboratory used neutron activation analyses with radiochemical separation. The data received were in good agreement. The value for total Hg was certified to be 126 ng/g, with a 95% confidence interval from 119 to 132 ng/g. For MeHg the certified value of 47 ng/g expressed as Hg was assigned, with a 95% confidence interval from 43 to 51 ng/g. Stability testing has shown that both total and MeHg are stable if samples are stored in a dry and dark place at room temperature. The sample is now available as a certified reference material and is, in particular, useful for quality control measurements of Hg and MeHg in mussel samples at low concentration levels.     

Certification of total mercury and methylmercury concentrations in mussel homogenate (Mytilus edulis) reference material, IAEA-142

Due to the increased demand for new reference materials certified for total and methylmercury (MeHg) a sample of mussel homogenate (IAEA-142) has been prepared. Thirteen experienced laboratories reported results for total Hg of which 9 laboratories also reported results for MeHg content. Laboratories reporting MeHg results used various isolation techniques (solvent extraction, saponification, acid leaching, ion-exchange separation, and distillation) and detection systems (cold vapour atomic absorption spectrometry (CV AAS), cold vapour atomic fluorescence spectrometry (CV AFS), gas chromatography with electron capture detector (GC/ECD) and HPLC with CV AAS detector). In the case of total Hg, most of the laboratories used acid digestion, only two used alkaline dissolution, followed either by CV AAS or CV AFS. One laboratory used neutron activation analyses with radiochemical separation. The data received were in good agreement. The value for total Hg was certified to be 126 ng/g, with a 95% confidence interval from 119 to 132 ng/g. For MeHg the certified value of 47 ng/g expressed as Hg was assigned, with a 95% confidence interval from 43 to 51 ng/g. Stability testing has shown that both total and MeHg are stable if samples are stored in a dry and dark place at room temperature. The sample is now available as a certified reference material and is, in particular, useful for quality control measurements of Hg and MeHg in mussel samples at low concentration levels. Received: 24 September 1996 / Revised: 20 November 1996 / Accepted: 8 December 1996     

微波消解ICP-MS测定海洋沉积物中微量元素

采用微波消解-电感耦合等离子体质谱(ICP-MS)法同时测定海洋沉积物中的Cr、Co、Ni、Cu、Zn、Cd、Pb7种微量元素。对微波消解酸体系和微波程序进行了优化,结果表明:由4 mL HNO3与2 mL HF组成的混合酸对沉积物消解效果好;阶段升温,最高温度200℃,消解30 min有着最佳的消解效果。采用本实验方法对7种不同类型的海洋沉积物标准物质进行了测定,测定结果与标准值一致。各元素的检出限在0.009~0.17 ng/g之间。该方法快速简便、准确度高,可用于海洋沉积物样品中多元素同时测定。     

Microwave-assisted double insert vapour-phase digestion of organic samples

A microwave-assisted double insert multimode vapour-phase digestion method was developed for the digestion of organic samples. The experimental set-up was based on a third generation-type teflon microwave vessel, equipped with an automatic pressure regulating type vessel cover. A borosilicate glass holder insert, containing a smaller quartz sample insert, was fitted inside the vessel. Sulphuric acid was added to the holder insert as a microwave absorbing and temperature transferring liquid, which transferred heat to the sample insert (into which the sample was weighed) and charred the sample material. Oxidation of the sample material was carried out simultaneously with charring using nitric acid vapour, which was generated by the 1:1 (v/v) sulphuric acid-nitric acid mixture located in the bottom of the microwave vessel. This set-up generated high digestion efficiency, without any of the interferences normally associated with direct sulphuric acid usage. The method was used for determining the concentrations of Cd, Cr, Cu, Mn, Mo, Zn and Fe in certified organic reference materials using ICP-OES instrumentation. The certified organic reference materials were NRCC DOLT-2 dogfish liver, NIST-SRM 1577b bovine liver and IRMM VDA cadmium in polyethylene No. 001 and No. 004. The results were in good agreement with the certified values, forepart from Cd. For Cd the results were lower than the certified values due to volatilization losses. Sample materials that could not be digested by an earlier procedure were completely digested during a single-step, 30 min digestion. The tested sample materials included certified reference materials, 3-nitrobenzoic acid (3-NBA) and pike (Esox lucius) muscle. The residual carbon concentrations in the digestion solutions were below the detection limit of the TOC instrument. This type of digestion method is described here for the first time in the literature.     

Determination of Cd in sonicate slurries and leachates of biological and environmental materials by FI-CV-AAS

An analytical method for Cd analysis in solid samples which combines the ultrasonic slurry formation with cold vapour generation and atomic absorption spectrometry is described. The samples are suspended in HCl and sonicated until homogeneous and reduced particle size slurry formation. Several aspects were studied: acidity of the medium, sonication time, and slurry formation in different matrices. The procedure described permits the use of direct calibration, with KCN addition as masking agent of interfering ions (Cu, Pb, Ni and Zn) present in the environmental matrices. Supernatant analysis of these last samples experimentally shown that preparation of the suspension with 6 mol l(-1) HCl concentration led to quantitative extraction of Cd. Biological materials analysis needed the use of the standard addition calibration method due to the high matrix effect observed. Supernatant analysis in biological samples does not give a total Cd recovery for all of them. The detection limits observed for Cd were 0.05 and 0.2 mug l(-1) for supernatant and slurry analysis respectively in environmental samples, while in biological samples were 0.2 and 0.6 mug l(-1) for supernatant and slurry analysis, respectively. In all case the better precision was obtained for supernatant analysis (3-6%) than slurry analysis (6-12%). The results obtained by analysing different reference materials (sewage sludge, city waste incineration, Antarctic krill and human hair) showed good agreement with the certified value confirming the validity of such a method for Cd determination instead to wet digestion procedures.     

Determination of total urinary mercury by on-line sample microwave digestion followed by flow injection cold vapour inductively coupled plasma mass spectrometry or atomic absorption spectrometry

The total mercury content in urine was determined by inductively coupled plasma mass spectrometry with the so-called cold vapour method after on-line oxidative treatment of the sample in a microwave oven (FI-MW-CV-ICPMS). Use of a KBr/KBrO(3) mixture, microwave digestion, and the final oxidation with KMnO(4), assure the complete recovery of the organic forms of Hg which would be difficult to determine otherwise if using only the CV-ICPMS apparatus. Quantitative recoveries were obtained for phenyl Hg chloride (PMC), dimethyl Hg (DMM), Hg acetate (MA) and methyl Hg chloride (MMC). Use of automatic flow injection microwave systems (FI-MW) for sample treatment reduces environmental contamination and allows detection limits suitable for the determination of reference values. Since no certified reference materials were commercially available in the concentration ranges of interest, the accuracy of the proposed procedure has been assessed by analysing a series of urine samples with two independent techniques, ICP-MS and AAS. When using the FI-MW-CV-ICP-MS technique, the detection limit was assessed at 0.03microg/L Hg, while with FI-MW-CV-AAS it was 0.2microg/L Hg. The precision of the method was less than 2-3% for FI-MW-CV-ICP-MS and about 3-5% for FI-MV-CV-AAS at concentrations below 1microg/L Hg. These results show that ICP-MS can be considered as a "reference technique" for the determination of total urinary Hg at very low concentrations, such as are present in non-exposed subjects.     

Distillation, on-line RP C18 preconcentration and HPLC-UV-PCO-CVAAS as a new combination for the determination of methylmercury in sediments and fish tissue

 Distillation as a way of sample digestion has been combined with on-line RP C18 preconcentration and HPLC-UV-PCO-CVAAS (high performance liquid chromatography – ultra violet – post column oxidation – cold vapour atomic absorption spectrometry) for the determination of methylmercury at background levels in sediments, soils and fish tissue. To prove the accuracy of this method, it was applied to sediment and fish tissue reference materials. The results correspond with the reference values within their error ranges. Excellent recoveries (92–95%) were obtained for the sediment samples by means of the standard addition method. The standard deviations of the sediment samples were within an acceptable range (7.2–12.5%), those of the fish samples were substantially lower (3.4–5.0%). The detection limit is 0.04 ng/g for 1 g sample weight. Received: 23 November 1995/Revised: 16 April 1996/Accepted: 20 April 1996     

Rapid destruction of plant material with concentrated nitric acid vapour (vapour phase oxidation)

Concentrated nitric acid vapour is used in a simple rapid method for the destruction of organic matter in plant tissue before analysis for trace elements. About 90% of the organic matter is destroyed by the nitric acid vapour within 5-6 min and destruction is then completed by the addition of perchloric acid. The method gives zero or low blank values and has comparable precision and accuracy to conventional acid digestion methods.     

Trace mercury analysis in biological material: use of 203Hg-labelled methylmercury chloride for in vivo labelling of fish to study the efficacy of various wet ashing procedures

Several wet ashing techniques for trace mercury analysis by cold vapour atomic absorption have been evaluated with radiotracer mercury, and in particular fish labelled in vivo with ²⁰³Hg-tagged methylmercury chloride. Partial digestion methods suffer from strong matrix effects; these include incomplete extraction from the sample, hold-back of mercury in the extraction solution during the reduction/aeration step, and alteration of the aeration release pattern so as to cause low results if measurement is based on peak height. A complete digestion method is outlined; this gives good results and is tentatively recommended pending further tests with other types of biological samples.     

Development of an ICP-HRIDMS method for accurate determination of traces of silicon in biological and clinical samples

An inductively coupled plasma-high resolution isotope dilution mass spectrometric (ICP-HRIDMS) method in combination with a microwave-assisted decomposition technique has been developed for the determination of traces of silicon in biological and clinical samples. A 30Si-enriched spike solution was used for the isotope dilution step. Decomposition of the samples was achieved by use either of HNO3 or a mixture of HNO3 and HF. By application of both methods of digestion to the same sample it was possible to differentiate between a poorly soluble silicate fraction and an HNO3-soluble silicon species. Traces of silicon were determined in different reference materials, which are not certified for this element, and in other biological and clinical samples. A concentration range of 1-600 microgram g(-1) was covered by the different samples. For homogeneous samples relative standard deviations of 2-4% were obtained. The detection limit was strongly affected by the blank. In this connection purification of water, used in the analytical procedure, was especially critical. The blank contribution of the ICP-MS instrument could be minimized by applying a nebulizer and a spray chamber made of PFA, a sapphire injection tube, and a silicon nitride torch. Under these conditions detection limits of 0.15 microgram g(-1) and 0.2 microgram g(-1) were obtained for the HNO3 and HNO3-HF digestion methods, respectively, when a sample weight of 0.5 g was used. With regard to expected silicon content this enables determination in almost all biological and clinical samples. The ICP-HRIDMS results were compared with those recently obtained in an interlaboratory study. This isotope-dilution method is an potential option for certification of silicon in reference materials, a method for which is still required.     

Determination of uranium is sea water and biological materials by neutron activation after selective preconcentration with 1-(2-pyridylazo)-2-naphthol

Uranium is preconcentrated from sea water, tap water, and solutions obtained by digestion of biological samples, by coprecipitation with 1-(2-pyridylazo)-2-naphthol (PAN). Coprecipitation is most effective at pH 4.5–6.5 with a recovery of 85–94%. In the presence of 0.1 M 1,2-cyclohexylenedinitrilotetraacetic acid (CyDTA) as a masking agent, the method is highly selective for uranium. After neutron activation of the precipitate, uranium can be quantified via the ²³⁹U nuclide with a relatively low background in the region of interest (74 keV). Detection limits are 3–4 ng kg^?1 for 500-ml water samples and 5 μg kg^?1 for 0.5-g biological samples (after digestion). The method can be applied to most environmental samples, as shown by the results for sea water and three standard reference materials.     

Determination of total mercury in environmental and biological samples by flow injection cold vapour atomic absorption spectrometry

A simple and accurate method has been developed for the determination of total mercury in environmental and biological samples. The method utilises an off-line microwave digestion stage followed by analysis using a flow injection system with detection by cold vapour atomic absorption spectrometry.

The method has been validated using two certified reference materials (DORM-1 dogfish and MESS-2 estuarine sediment) and the results agreed well with the certified values. A detection limit of 0.2 ng g⁻¹ Hg was obtained and no significant interference was observed. The method was finally applied to the determination of mercury in river sediments and canned tuna fish, and gave results in the range 0.1–3.0 mg kg⁻¹.     

Preconcentration and separation of total mercury in environmental samples using chemically modified chloromethylated polystyrene-PAN (ion-exchanger) and its determination by cold vapour atomic absorption spectrometry

The use of chemically modified chloromethylated polystyrene-PAN, CMPS-PAN (ion-exchanger) for the preconcentration and separation of total mercury after digestion in preparation for determination by cold vapour atomic absorption spectrometry (CVAAS) was described. The effects on the percentage of recovered mercury by mass change of ion-exchanger, stirring time, pH of the solution samples and eluent concentration were studied. The distribution coefficient K(d) is 10(6.6) ml g(-1). The interfering effects of some foreign ions were described. The metal complex formed between CMPS-PAN ion-exchanger and mercury was characterized by IR spectroscopy, pH-metric titration and thermal analysis. The method is simple and rapidly applicable for the determination of total mercury (ng ml(-1)) in natural water, milk and urine.     

Determination of the total selenium in different materials by pixe

The determination of the total selenium in different materials is now a routine task for many laboratories. A few problems, however, still remain concerning the choice of an efficient digestion technique and an accurate and precise detection method. For this purpose, we investigated the action of various reagents used for the wet digestion of different materials. Efficient digestion combined with preconcentration were successfully applied to biological samples. Using PIXE, selenium can be detected at 5 ppb level in a short time. The overall performance of wet digestion and PIXE methods were tested with some standard reference materials.