Simultaneous determination of carbaryl and azinphos-methyl in water by first-derivative synchronous spectrofluorimetry

A method is proposed for the simultaneous determination of the pesticides carbaryl (CBL) and azinphos-methyl (AZM) in water by first-derivative synchronous spectrofluorimetry. It is based on the alkaline hydrolysis of both pesticides to their metabolites 1-naphthol (from CBL) and anthranilic acid (from AZM). The constant wavelength difference chosen to optimize the determination is Δλ=λ_em?λ_ex=103 nm. CBL is measured at 302/405 nm and AZM at 333/436 nm. The calibration graphs are linear between 2.0 and 500.0 ng/ml for CBL and between 1.2 and 500.0 ng/ml for AZM with detection limits of 0.62 ng/ml and 0.35 ng/ml, respectively. The precision of the method (RSD) is 2.4% at the 80.0 ng/ml level for CBL and 2.5% at the 80.0 ng/ml level for AZM. The method is applied to the determination of both analytes in samples of natural waters.     

Spectrofluorimetric determination of carbaryl and 1-naphthol in micellar media

The interaction of 1-naphthol-N-methyl-carbamate (carbaryl) and its degradation product, 1-naphthol, with the surfactant hexadecyl-trimethylammonium bromide has been studied. The micellar medium allows the direct spectrofluorimetric determination of carbaryl, with 6.2 ng/ml as detection limit in acidic medium, or indirectly, after hydrolysis, as 1-naphthol at pH 11.0 or pH 3.0 with detection limits of 0.4 and 1.6 ng/ml, respectively. The recoveries of carbaryl and 1-naphthol from natural waters are acceptable.     

Determination of 1-naphthylacetic acid in commercial formulations and natural waters by solid-phase spectrofluorimetry

A method for the determination of trace amounts of 1-naphthylacetic acid (NAA) has been developed, based on solid-phase spectrofluorimetry. The relative fluorescence intensity of NAA fixed on Sephadex QAE A-25 gel was measured directly after packing the gel beads in a 1-mm silica cell, using a solid-phase attachment. The wavelengths of excitation and emission were 280 and 336 nm, respectively. The applicable concentration range was from 0.3 to 18 ng/ ml, with a relative standard deviation of 1.4% (for a level of 9 ng/ml) and a detection limit of 0.09 ng/ml. The method was applied to the determination of NAA in commercial formulations and natural waters. The method is more sensitive and selective than other methods described in the literature.     

Determination of carbaryl and its metabolite 1-naphthol in commercial formulations and biological fluids

A simple and sensitive method for the determination of carbaryl in whole blood and commercial formulations, based on normal, and synchronous first- and second-derivative fluorescence spectra, is presented. Solvent effects on the spectral characteristics of carbaryl solutions and the influences of instrumental parameters are described in detail. Two methods have been developed, with neutral (for carbaryl) and basic (for 1-naphthol) media. Detection limits of 0.9 and 0.7 ng/ml were achieved for carbaryl and 1-naphthol, respectively, with the first-derivative approach.     

Determination of carbaryl in foods by solid-phase room-temperature phosphorimetry

A phosphorimetric solid phase assay is proposed for the determination of the pesticide carbaryl (CBL) at room temperature. CBL was spotted on filter paper together with Tl(I) as heavy metal, and dried for 3 min, after which the diffuse transmitted phosphorescence was measured using two quartz plates to avoid the quenching effect produced by atmospheric oxygen. The linear dynamic range was 0.5–4.0 μg/mL and the detection and quantification limits were 0.09 and 0.31 μg/mL, respectively. The precision of the method, expressed as relative standard deviation, was 2.3% for a sample containing 2.0 μg/mL of CBL. The method was applied to the determination of CBL residues in cereals, potatoes and waters, obtaining recoveries ranging between 92 and 105%.     

Determination of carbaryl in foods by solid-phase room-temperature phosphorimetry

A phosphorimetric solid phase assay is proposed for the determination of the pesticide carbaryl (CBL) at room temperature. CBL was spotted on filter paper together with Tl(I) as heavy metal, and dried for 3 min, after which the diffuse transmitted phosphorescence was measured using two quartz plates to avoid the quenching effect produced by atmospheric oxygen. The linear dynamic range was 0.5–4.0 μg/mL and the detection and quantification limits were 0.09 and 0.31 μg/mL, respectively. The precision of the method, expressed as relative standard deviation, was 2.3% for a sample containing 2.0 μg/mL of CBL. The method was applied to the determination of CBL residues in cereals, potatoes and waters, obtaining recoveries ranging between 92 and 105%. Received: 10 October 1997 / Revised: 2 February 1998 / Accepted: 7 February 1998     

Solid-phase spectrophosphorimetric determination of the pesticide <Emphasis Type="Italic"> o</Emphasis>-phenylphenol in water and vegetables

A phosphorimetric method for the determination of o-phenylphenol (OPP) using filter paper as solid support and Tl(I) as heavy metal enhancer of the phosphorescent signal is proposed. The phosphorescence measurements were carried out by placing the paper with the sample between two plates of quartz, thus avoiding the quenching effect produced by atmospheric oxygen and moisture. The linear dynamic range of the method was 0.5-4.0 mg L(-1) and the detection and quantification limits were 0.03 and 0.11 mg L(-1), respectively. The precision of the method (expressed as relative standard deviation) was 1.7% for a sample containing 2.0 mg L(-1) of analyte. The method has been applied to the determination of OPP in different types of water, lettuce, string beans and peppers, with recoveries ranging between 97.1 and 100.7%     

2,6-Bis[(o-hydroxy)phenyliminomethyl]-1-hydroxybenzene as a reagent for the selective spectrofluorimetric determination of aluminium

A spectrofluorimetric method for the determination of aluminium at ng/ml level has been developed. The method is based on the formation of a fluorescent 11 complex between Al(III) and 2,6-bis[(o-hydroxy)phenyliminomethyl]-1-hydroxybenzene at an apparent pH of 5.0 in an aqueous-ethanol medium (70% v/v ethanol). The influence of reaction variables is discussed. The range of concentration of the method is 1.0–10.0 ng/ml aluminium, the relative standard deviation 1.5% and the limit of detection 0.1 ng/ml. The advantages of the proposed method include high sensitivity and selectivity. The method has been applied to the determination of aluminium in natural waters.     

Fluorometric determination of carbaryl in micellar Media

A new method is proposed for the fluorometric determination of carbaryl, based on the basic hydrolysis of the pesticide to 1-naphtholate at pH 12 and enhancement of the relative quantum yield of this latter compound by the presence of non-ionic surfactants. The procedure is quick and easy and presents a limit of detection of 1.4 ng/ml. The interaction of carbaryl with non-ionic surfactants has been studied both spectrophotometrically and fluorometrically, in different media. To determine carbaryl in real samples prior extraction into xylene and back-extraction with 1 M sodium hydroxide is necessary to avoid the strong quenching effect of the matrix.     

Determination of submicrogram amounts of gallium by ion-exchanger fluorimetry Determination of gallium in natural waters

A method for microdetermination of gallium at ng/ml level has been developed, based on ion-exchanger fluorimetry. The gallium reacts with salicylidene-o-aminophenol to give a highly fluorescent complex, which is fixed on a dextran-type cationic resin. The fluorescence of the resin, packed in a 1-mm silica cell, is measured directly with a solid-surface attachment. The range of concentration of the method is 2.0-10.0 ng/ml, the RSD 1.3% and the detection limit 0.3 ng/ml. The method has been applied to the determination of gallium in natural waters. The gallium content found in tap water was higher than that in raw water. This is related to the use of commercial aluminium salts in the water-treatment plant.     

天然水体中痕量汞的形态分析方法研究

天然水体中汞的含量仅为ng/L级，不仅难以测出，而且在测定过程中极易受到干扰；利用两次金汞齐的预富集方法与原子荧光法结合的技术，作者建立了天然水体超痕量不同形态汞的准确分析方法；该方法的检出限达到了0．02ng／L，实验平均回收率为101%；该方法也适用于其它低汞含量水样(包括稀释后的污水及化工废水)中汞的形态分析。     

Determination of benomyl, diphenyl, o-phenylphenol, thiabendazole, chlorpyrifos, methidathion, and methyl parathion in oranges by solid-phase extraction, liquid chromatography, and gas chromatography

A simple and rapid method was developed for determination of benomyl, diphenyl (DP), o-phenylphenol (OPP), thiabendazole (TBZ), chlorpyrifos, methidathion, and methyl parathion in whole oranges. These compounds were extracted from a mixture of samples and anhydrous sodium acetate with ethyl acetate. The ethyl acetate extract was concentrated and cleaned up by passing through tandem solid-phase extraction columns consisting of anion-exchange and primary/secondary amine bonded silica. The eluate was concentrated and volume was adjusted with methanol for subsequent liquid chromatography (LC) and gas chromatography (GC). Benomyl (as methyl-2-benzimidazole carbamate, MBC), DP, OPP, and TBZ residues were determined by LC with fluorescence detection. Recoveries at 3 fortified levels (0.1, 1, and 10 micrograms/g) ranged from 63.9 to 97.4%, with coefficients of variation (CVs) of 1.6 to 15.5%. Limits of detection (LODs) were 0.01 microgram/g for DP, OPP, TBZ and 0.05 microgram/g for benomyl. Chlorpyrifos, methidathion, and methyl parathion residues were determined by GC with flame photometric detection. Recoveries ranged from 90.4 to 97.0%, with CVs of 2.1 to 5.9%. LODs were 0.005 microgram/g for chlorpyrifos and methyl parathion, and 0.01 microgram/g for methidathion.     

Continuous flow system for the determination of trace vanadium in natural waters utilizing in-line preconcentration/separation coupled with catalytic photometric detection

A sensitive and rapid method is presented for the determination of vanadium at ng to sub-ng ml(-1) levels in natural waters, in which in-line preconcentration/separation is directly coupled with catalytic detection of vanadium in a flow-injection system. Vanadium was adsorbed on a small column packed with Sephadex G-25 gel and desorbed with a small volume of 0.010 M HCl. The catalytic action of vanadium on the oxidation of chromotropic acid (1,8-dihydroxy-3,6-naphthalenedisulphonic acid) by bromate in pH 3.8 buffered media was used in the sensitive determination of vanadium. Effective preconcentration/separation of trace vanadium can be achieved from Fe(III), Cu(II) and a large excess of sodium chloride in seawater sample. A linear calibration using a 5 m sample loop was obtained for vanadium in the range 0-2.5 ng ml(-1). The limit of detection was 0.02 ng ml(-1) and the relative standard deviation was 1.2% for 1.0 ng ml(-1) vanadium (n=5). The present FIA system is rapid and sensitive and can be readily applied to river water and coastal seawater samples.     

Low-level mercury determination with thiamine by fluorescence optosensing

A sensitive fluorescence optosensing method for the determination of Hg(II) in water samples is described. The method, using a flow injection technique, is based on the immobilization on a non-ionic-exchanger solid support (packed in a flow cell placed in a conventional fluorimeter) of the thiochrome formed by the oxidation of thiamine with Hg(II) in a continuous flow carrier at pH 8.1. Experimental parameters such as the solid support, the carrier pH, the thiamine concentration and the flow-rate were investigated to select the optimum operating conditions. The proposed optosensor showed a relative standard deviation of + 3.0% for ten replicates analysis of 100 ng ml(-1) of mercury(II). A detection limit of 3 ng ml(-1) for mercury(II) was achieved for 4-ml sample injections. A detailed study of interferences (possible elements present in natural waters) demonstrated that this optosensing method is virtually specific for this metal, because it allows the determination of mercury in the presence of relatively large amounts of other heavy metals and compounds present in natural waters, such as Mg(II) or Ca(II). The method was successfully applied to the determination of Hg(II) in spiked samples of mineral, tap and sea water.     

Determination of trace amounts of carbaryl in water by solid-phase laser-induced fluorescence

A quick and very sensitive method is proposed for the determination of the insecticide carbaryl, following transformation in 1-naphthol, using solid-phase fluorescence excited by a pulsed nitrogen laser and detected with a charge-coupled device. Carbaryl is hydrolized in an alkaline medium resulting in 1-naphthol. This hydrolysis product is fixed on QAE Sephadex A-25 gel at pH 11.20. The fluorescence of the gel, packed in a 1 mm silica cell, was measured directly using a solid-surface attachment. The detection limit obtained was 1.8 ng. A recovery study was carried out on several types of water samples to check the efficiency of the method. The results obtained are compared with data published in a previous paper where the LS-50 spectrofluorimeter was used. The detection and quantification limits are improved here by an order of magnitude.     

Determination of pyrene and benzo(a)pyrene residues in water by derivative synchronous solid-phase spectrofluorimetry

Benzo(a)pyrene (BaP) and pyrene (Pyr) are two polycyclic aromatic hydrocarbons (PAHs) showing native fluorescence in solution. Both compounds have been determined in water at trace levels by solid-phase spectrofluorimetry, in which BaP and Pyr are fixed on Sephadex G-25 gel and the relative fluorescence intensity is measured after the system is packed in a 1-mm silica cell. First-derivative synchronous spectra obtained at =38 nm were used to determine BaP and Pyr in the presence of other potentially interferent PAHs. The spectral characteristics of the PAHs-gel system are described, the applicable concentration ranges being 0.4–2.5 ng/ml for BaP and 0.7–4.5 ng/ml for Pyr. The relative standard deviations were 1.1% and 1.4% for BaP and Pyr respectively. The detection limits were 0.04 ng/ml for BaP and 0.1 ng/ml for Pyr. The method was applied to the analysis of both compounds in water at trace levels and a recovery study on tap, natural and sea waters was carried out.     

Determination of warfarin at trace-levels in water by solid-phase spectrofluorimetry

A new selective and sensitive spectrofluorimetric method for the determination of warfarin at trace levels (0.2–50.0 ng/ml) in water is proposed. Warfarin is fixed on Sephadex QAE A-25 gel (at pH = 7.0) and its fluorescence is measured directly in the solid-phase using a 1-mm silica cell at 312/385 nm with a detection/quantification limit of 0.06/0.2 ng/ml, a relative standard deviation of 2.3% and recoveries between 95 and 105%. The method is applied to the determination of warfarin residues in water.     

The Determination of Trace Amounts of Phosphate in Natural Water by Flow Injection Fluorimetry

Abstract

A new method is suggested for the determination of trace amounts of phosphate by flow injection fluorimetry, based on the principle that molybdophosphate could quench the fluorescence of Rhodamine 6G. The fluorescence is excited at 350 nm and measured at 550 nm. The calibration graph is linear up to 100 ng/ml phosphorus concentration and the detection Unit is 1.9 ng/ml. The present method has been applied to the determination of soluble phosphorus in natural water samples, the recoveries were in the range of 92 – 102 %. The sampling rate is 120 samples per hour.     

Determination of warfarin at trace-levels in water by solid-phase spectrofluorimetry

A new selective and sensitive spectrofluorimetric method for the determination of warfarin at trace levels (0.2-50.0 ng/ml) in water is proposed. Warfarin is fixed on Sephadex QAE A-25 gel (at pH = 7.0) and its fluorescence is measured directly in the solid-phase using a 1-mm silica cell at 312/385 nm with a detection/quantification limit of 0.06/0.2 ng/ml, a relative standard deviation of 2.3% and recoveries between 95 and 105%. The method is applied to the determination of warfarin residues in water.     

Determination of ciprofloxacin in human urine and serum samples by solid-phase spectrofluorimetry

A method for the determination of trace amounts of ciprofloxacin has been developed, based on solid-phase spectrofluorimetry. The relative fluorescence intensity of ciprofloxacin fixed on Sephadex SP C-25 gel was measured directly after packing the gel beads in a 1-mm silica cell, using a solid-phase attachment. The wavelengths of excitation and emission were 272 and 448 nm, respectively. Using a sample volume of 1000 ml, the linear concentration range of application was 0.3-10.0 ng.ml(-1) of ciprofloxacin, with a R.S.D. of 1.2% (for a level of 4.0 ng.ml(-1)) and a detection limit of 0.1 ng.ml(-1). The method was applied to the determination of ciprofloxacin in human urine and serum samples. It was validated applying the standard addition methodology and using HPLC as a reference method. Recovery levels of the method reached 100% in all cases.