Spectrophotometric determination of mn(II) with 1-(2-quinolylazo)-2,4,5- trihydroxybenzene and microdetermination of mn in foodstuffs

A method is described for the spectrophotometric determination of manganese in foodstuffs by means of its complex with 1-(2-quinolylazo)-2,4,5-trihydroxybenzene, formed in alkaline medium. The molar absorptivity of the complex is 4.6 x 10(4) l.mole(-1).cm(-1).     

Simultaneous determination of manganese and zinc in mixtures using first- and second-derivative spectrophotometry

A new direct spectrophotometric determination of manganese with 5,8-dihydroxy-1,4-naphthoquinone (naphthazarin,NAZA) is reported. Absorption maximum, molar absorptivity and Sandell's sensitivity of 1:2 (M:L) complex are 695 nm, 1.88x10(4) l mol(-1) cm(-1) and 2.92 ng cm(-2), respectively. A linear calibration graph is obtained up to a concentration of 7.2 mug ml(-1) of manganese. The optimum range for determination (Ringbom) is between 0.20 and 6.8 mug ml(-1). A rapid method for simultaneous determination of manganese and zinc in their mixture using derivative spectra is described. The range 0.28-5.6 mug ml(-1) manganese could be determined in the presence of 0.33-6.8 mug ml(-1) zinc and vice versa. The developed method was applied to the simultaneous spectrophotometric determination of manganese and zinc in some synthetic mixtures and was found to give satisfactory results.     

Spectrophotometric method for the determination of manganese with phenylfluorone in the presence of Triton X-100 and cetylpyridinium chloride in pharmacological preparations and vegetable fertilizers

A simple and very sensitive method for the spectrophotometric determination of manganese in pharmacological preparations and vegetable fertilizers is proposed. The method is based on the formation of a blue coloured complex of Mn (II) with 9-phenyl-2,3,7-trihydroxy-6-fluorone (PF) in the presence of cetylpyridinium chloride (CP) and Triton X-100. Optimum concentrations of PF, CP, Triton X-100 and pH ensuring maximum absorbance were defined. The complex Mn(II)-PF-CP-Triton X-100 shows maximum absorbance at 591 nm with the molar absorptivity value 1.77x10(5 )L mol(-1 )cm(-1). The detection limit of the method is 0.004 microg mL(-1). The Beer's law is obeyed for manganese concentrations in the range 0.02-0.2 microg mL(-1). The effect of foreign ions was elucidated. The statistical evaluation of the method was carried out for six determination using 5 microg Mn and the following results were obtained: standard deviation 0.021, confidence interval 5.05+/-0.05 microg Mn. The method has been applied for the determination of manganese in pharmacological preparations (Biovital, Kinder Biovital) and vegetable fertilizers (Hydrovit 100, Florovit).     

Spectrophotometric determination of nickel in vegetable oil with ammonium 2-amino-1-cyclohexene-1-dithiocarboate

The reaction between nickel and ammonium 2-amino-1-cyclohexene-1-dithiocarboate in aqueous acetone medium at pH 3.0-8.0 results in a stable dark red complex. The ratio of reagent to nickel in the complex is 2:1 and the formation constant is 7.38 +/- 0.12 x 10(10). Beer's law is obeyed up to 4 microg/ml nickel at the absorption maximum at 535 nm. The apparent molar absorptivity is 2.8 x 10(4) l.mole(-1). cm(-1), and the detection limit is 10 ng/ml nickel. The method is applied to the determination of nickel in vegetable oil.     

Extraction spectrophotometric determination of maneb with 1-(2'-pyridylazo)-2-naphthol (PAN)

A rapid, sensitive, simple and selective spectrophotometric method has been developed for the determination of micro-quantities of maneb (manganese ethylenebisdithiocarbamate) after extraction of the manganese-PAN complex in isobutyl methyl ketone (MIBK). The complex absorbs strongly at 550 nm. Beer's law is obeyed over the concentration range 0.37-3.75 microg/ml. The molar absorptivity was found to be 4.1 x 10(4) l. mole(-1) . cm(-1). The developed method has been applied to the determination of maneb in commercial formulations, synthetic mixtures, grain and in the presence of various other dithiocarbamates.     

Sequential extraction and determination of copper and nickel with 2,4-dihydroxyacetophenone thiosemicarbazone

2,4-Dihydroxyacetophenone thiosemicarbazone (DAPT) forms a 1:1 complex with copper(II) which can be extracted into n-butanol or ethyl acetate from acetic acid-sodium acetate (pH 5.0) buffer, and a 1:1 nickel(II) complex which can be extracted into n-butanol from ammonium chloride-ammonia (pH 7.5) buffer. The difference between the pH(1 2 ) values for extraction of the two complexes is 3.4 and this has been exploited for their sequential extraction and determination. The molar absorptivities for the copper and nickel complexes are 1.5 x 10(4)l.mole(-1).cm(-1) at 390 nm and 8.2 x 10(3)l.mole(-1).cm(-1) at 385 nm respectively. The procedure has been applied to the analysis of cupronickel.     

Determination of manganese in some medicinal plants and their infusions by a catalytic spectrophotometric method

The catalytic effect of manganese (II) on the oxidation of the azo dye 3-Methyl-6-(2-hydroxyethoxy)-2-[2-methoxy-4-N (N, N diethylamino) phenylazo] benzothiazolium methylsulphate, with potassium periodate in the presence of 1,10-phenanthroline in weakly acidic media was studied. The reaction was followed spectrophotometrically by measuring the decrease in the absorbance of the dye at 560 nm. Under the optimum conditions (4 x 10(-5) mol dm(-3) azo dye, 4 x 10(-4) mol dm(-3) potassium periodate, 1 x 10(-4) mol dm(-3) 1,10-phenanthroline, 0.1 mol dm(-3) buffer--pH 3.0, 70 degrees C, 8 min) manganese (II) in the range 0.1-5 ng cm(-3) could be determined by the fixed-time method with a detection limit of 0.035 ng cm(-3). The developed method is highly sensitive, selective, and simple. The method was applied successfully to the determination of total manganese in some medicinal plants and to analyse their infusions for trace amounts of total manganese and free manganese (II) ions without separation.     

Spectrophotometric determination of copper in alloys using naphthazarin

Naphthazarin (5,8-dihydroxy-1,4-naphthoquinone; Naph) is proposed as a chromogenic reagent for the spectrophotometric determination of copper(II). The polynuclear complex has a mole ratio of Cu:Naph=4:6 in a 50% v/v ethanol/water medium containing 0.1 M ammonium acetate and 1.5% (w/v) sodium dodecyl sulfate. The copper-naphthazarin complex shows an absorption maximum at 330 nm with a molar absorptivity of 1.84x10(4) l mol(-1) cm(-1). Beer's law is obeyed up to 4.5 ppm of copper(II). The method was applied for copper determination in alloy samples with satisfactory results.     

Extraction-spectrophotometric determination of aluminium in river water with pyrocatechol violet and a quaternary ammonium salt

The simple removal of excess of co-extracted reagent in the solvent extraction of anionic metal complexes with a quaternary ammonium salt greatly improves the determination of aluminium with Pyrocatechol Violet (PV) and zephiramine (tetradecyldimethylbenzylammonium chloride). The exchange equilibrium constants for PV reagent and aluminium complex with four univalent anions (halides and nitrate) were determined when chloroform and 1,2-dichloroethane were used as extracting solvents. The constants were compared with those obtained with Pyrogallol Red. The method with PV and chloroform is suitable for the determination of micro-amounts of aluminium in river water. The apparent molar absorptivity of the aluminium complex in chloroform is 8.9 x 10(4) 1 mol(-1) cm(-1) at 587 nm. The limit of detection and precision achieved with the method are 3 mug l(-1) and within 4% respectively. A large excess of reagent can be used, and the ternary complex can be completely extracted over the pH range 5.5-10. Masking agents allow most interferences to be suppressed.     

A rapid and sensitive extractive spectrophotometric determination of palladium(II) in synthetic mixtures and hydrogenation catalysts using pyridoxal-4-phenyl-3-thiosemicarbazone.

A rapid and sensitive extractive spectrophotometric method has been developed for the determination of palladium(II) in synthetic mixtures and hydrogenation catalysts using pyridoxal-4-phenyl-3-thiosemicarbazone (PPT) as an analytical reagent. The reagent forms a red-color complex with the metal at pH 3.0, which is extracted into benzene. The absorbance is measured at 460 nm. The method adheres to Beer's law up to a concentration range of 0.4-6.4 microg cm(-3). The molar absorptivity and Sandell's sensitivity are 2.20 x 10(4) dm3 mol(-1) cm(-1) and 4.85 x 10(-3) microg cm(-2), respectively. The correlation coefficient of the Pd(II)-PPT complex is 0.99, which indicates an excellent linearity between two variables. The detection limit of this method is 0.05 microg cm(-3). The instability constant of the Pd(II)-PPT complex calculated from Edmond and Birnbaum's method is 2.90 x 10(-5) and that of Asmus' method is 2.80 x 10(-5) at room temperature. The concurrent repetition of the method is checked and the relative standard deviation (RSD) (n = 5) was derived as 1.84 percent. The present method was applied to the determination of palladium(II) in synthetic mixtures and hydrogenation catalysts. The results were compared by employing an atomic-absorption spectrometer.     

Extraction-spectrophotometric determination of iron(II) by ternary complex formation with pyrocatechol violet and cetyltrimethylammonium bromide

A method for iron(II) determination based on reaction with Pyrocatechol Violet to form a 1:2 binary complex at pH 5-7 is described and has been extended to an extraction-spectrophotometric procedure for the determination of iron(II) by formation of the 1:2:2 iron(II)-Pyrocatechol Violet-cetyltrimethylammonium bromide ternary complex. The molar absorptivities of the binary and ternary complexes at 595 and 605 nm are 6.55 x 10(4) and 1.35 x 10(5)1.mole(-1).cm(-1), respectively. The method has been successfully applied to the determination of iron in felspar, Portland cement and sodium hydroxide.     

A rapid and sensitive extractive spectrophotometric determination of copper(II) in pharmaceutical and environmental samples using benzildithiosemicarbazone.

Benzildithiosemicarbazone (BDTSC) is proposed as a sensitive and selective analytical reagent for the extractive spectrophotometric determination of copper(II). BDTSC reacts with copper(II) in the pH range 1.0-7.0 to form a yellowish complex. Beer's law is obeyed in the concentration range 0.5-0.4 microg cm(-3). The yellowish Cu(II)-BDTSC complex in chloroform shows a maximum absorbance at 380 nm, with molar absorptivity and Sandell's sensitivity values of 1.63 x 10(4) dm3 mol(-1) cm(-1) and 0.00389 microg cm(-2), respectively. A repetition of the method is checked by finding the relative standard deviation (RSD) (n = 10), which is 0.6%. The composition of the Cu(II)-BDTSC complex is established as 1:1 by slope analysis, molar ratio and Asmus' methods. An excellent linearity with a correlation coefficient value of 0.98 is obtained for the Cu(II)-BDTSC complex. The instability constant of the complex calculated from Edmond and Birnbaum's method is 7.70 x 10(-4) and that of Asmus' method is 7.66 x 10(-4), at room temperature. The method is successfully employed for the determination copper(II) in pharmaceutical and environmental samples. The reliability of the method is assured by analyzing the standard alloys (BCS 5g, 10g, 19e, 78, 32a, 207 and 179) and by inter-comparison of experimental values, using an atomic absorption spectrometer.     

Spectrophotometric determination of thorium in standard samples and monazite sands based on the floated complex of thorium with N-hydroxy-N,N′-diphenylbenzamidine and thorin

A selective and sensitive spectrophotometric method for the determination of Th(IV) has been based on the reaction with thorin and subsequent extraction of the red-orange coloured complex with N-hydroxy-N,N'-diphenylbenzamidine (HDPBA) in benzene as floated complex at pH 2.2. The complex in ethanol exhibits a maximum absorbance at 495 nm, with a molar absorptivity of 6.0x10(4) l mol(-1) cm(-1), with a Sandell's sensitivity of 3.9x10(-3) microg cm(-2). The method follows Beer's law up to 3.0 microg Th(IV) ml(-1). None of the common cations and anions tested interfere. The detection limit of the method is 0.04 microg Th(IV) ml(-1), the RSD (n=10) is 1.4%. The method has been successfully employed for the determination of thorium in various standard and monazite samples.     

A highly sensitive spectrophotometric determination of gallium with Pontachrome Azure Blue B and cetyltrimethylammonium chloride

A new spectrophotometric method for the determination of gallium with Pontachrome Azure Blue B and cetyltrimethylammonium chloride is described. The sensitivity of the colour reaction between gallium and Pontachrome Azure Blue B is greatly increased in the presence of cetyltrimethylammonium chloride. The gallium complex has maximal absorbance at 680 nm and pH 6.0-6.6. Beer's law is obeyed over the range 0.08-0.6 ppm of gallium; the molar absorptivity is 1.39 x 10(5) 1.mole(-1). cm(-1) and sensitivity 4.9 x 10(-4) mu/cm(2). The mole ratio of the complex, the formation constant and effect of interfering ions are described.     

Colour reaction of gold with 5-(4-sodium sulphonatephenylazo)-8-aminoquinoline and its analytical application

The synthesis of 5-(4-sodium sulphonatephenylazo)-8-aminoquinoline (SPAQ) is described, and a simple, rapid, selective and sensitive new spectrophotometric method for determination of gold is developed. SPAQ reacts with gold(III), and in the presence of cetyl trimethyl ammonium bromide cationic surfactant and upon making the solution alkaline, forms a blue-green 1:3 (metal:ligand) with an absorption maximum at 605 nm. Beer's law is obeyed over the concentration range 0-2 microg/ml gold. The molar absorptivity and Sandell's sensitivity of the method are 1.48 x 10(5) 1.mole(-1).cm(-1) and 0.0013 microg/cm(2), respectively. The interference of various ions has been studied and the method has been used for the determination of microamounts of gold in ores and anode slimes.     

Spectrophotometric determination of spermine and related compounds using o-hydroxyhydroquinonephthalein and manganese(II).

A simple and highly sensitive spectrophotometric method for the determination of spermine (Spm) was established based on the ternary complex formation reaction of Spm with o-hydroxyhydroquinonephthalein (QP) as a xanthene dye and manganese(II) as a metal ion in the presence of a dispersion agent. The apparent molar absorptivity at 555 nm and the relative standard deviation of the proposed method were 1.4 x 10(5) dm(3) mol(-1) cm(-1) and 0.50% (n = 10), respectively. In the method for flow-injection analysis (FIA), which employs a single-channel flow manifold system, a good linear relationship was observed over the 2 - 20 pg microl(-1) range of Spm by direct injection.     

Neotetrazolium chloride: a new reagent for spectrophotometric determination of manganese

The interaction of Mn(VII) and the Neotetrazolium chloride has been examined. The ion-associate formed is extracted into 1,2di-chloroethane. The optimum conditions have been established. The molar absorptivity of the complex is (9.1+/-0.08)x10(5) l mol(-1) cm(-1). The sensitivity of the method is 6.04x1010(-5) mug cm(-2). It is possible to extract and determine manganese in the presence of large number of cations and anions. The characteristic values for the extraction and the aqueous phase equilibria were determined: extraction constant K(ex)=3.21x10(9), distribution constant K(D)=33 and association constant beta=9.72x10(7). The method is applicable to analysis of soils and steels.     

Simultaneous determination of beryllium and aluminium in mixtures using derivative spectrophotometry

The spectrophotometric determination of beryllium and aluminium with 5,8-dihydroxy-1,4-naphthoquinone in the presence of a non-ionic surfactant is reported. Absorption maxima, molar absorptivity and Sandell's Sensitivity of 1:2 (M:L) beryllium and aluminium complexes are, 585 nm and 598 nm, 1.63 x 10(4) l.mole(-1).cm(-1) and 2.04 x 10(4) l.mole(-1).cm(-1), and 0.55 ng/cm(2) and 1.32 ng/cm(2) respectively. Beer's law is obeyed between 7.20-3.96 x 10(2) ng/ml beryllium and 1.08 x 10(1)-1.08 x 10(3) ng/ml aluminium. A method for simultaneous determination of beryllium and aluminium in their mixture using derivative spectra is described. The range 3.6 x 10(1)-3.6 x 10(2) ng/ml beryllium could be determined in the presence of 1.08 x 10(2)-1.08 x 10(3) ng/ml aluminium, and vice versa.     

A simple and rapid spectrophotometric method for the determination of nitrite by its decolorizing effect on peroxovanadate complex

A rapid, simple, and most economical spectrophotometric method was proposed for the determination of nitrite in various water samples, soil samples, and roots of leguminous plants. The method is based on decolorizing effect of nitrite on complex formed between hydrogen peroxide and vanadate in acidic medium. The decolorization of that complex by nitrite was exploited to monitor the reaction spectrophotometrically at 470 nm.The method was optimized for effect of concentrations of ammonium metavanadate, hydrogen peroxide, various acids, concentrations of sulphuric acid, order of reagents addition and color stability. The color of the complex was found to be stable for about 2 days, and the stability constant of the complex was also calculated by modified Job's method. The linearity range of the calibration graph was over 6.67-66.7 microg ml(-1) of nitrite with molar absorptivity, 0.276 x 10(3) mol(-1) l cm(-1) and Sandell's sensitivity, 0.1667 microg cm(-2). The method was applied successfully for the determination of nitrite in soil samples, various wastewater samples and roots of leguminous plants.     

Determination of ammonium in Kjeldahl digests by gas-diffusion flow-injection analysis with a bulk acoustic wave-impedance sensor

A novel flow-injection analysis (FIA) system has been developed for the rapid and direct determination of ammonium in Kjeldahl digests. The method is based on diffusion of ammonia across a PTFE gas-permeable membrane from an alkaline (NaOH/EDTA) stream into a stream of diluted boric acid. The trapped ammonium in the acceptor is determined on line by a bulk acoustic wave (BAW)-impedance sensor and the signal is proportional to the ammonium concentration present in the digests. The proposed system exhibits a favorable frequency response to 5.0 x 10(-6)-4.0 x 10(-3) mol l(-1) ammonium with a detection limit of 1.0 x 10(-6) mol l(-1), and the precision was better than 1% (RSD) for 0.025-1.0 mM ammonium at a through-put of 45-50 samples h(-1). Results obtained for nitrogen determination in amino acids and for proteins determination in blood products are in good agreement with those obtained by the conventional distillation/titration method, respectively. The effects of composition of acceptor stream, cell constant of conductivity electrode, sample volume, flow rates and potential interferents on the FIA signals were discussed in detail.