Studies on metallochromic indicators-III Hematoxylin and hematein

The use of hematoxylin and hematein as metallochromic indicators in direct EDTA titration of Zr(4+), Th(4+), Bi(3+), VO(+), Ga(3+), In(3+), Al(3+), Pb(+), Zn(2+), Mn(2+), Cd(2+), Cu(2+), Ni(2+), Co(2+), Mg(2+), and a few rare earths is described. Aluminium is titrated directly in presence of acetate buffer, lactic or glycoliic acid being used as auxiliary complexing agent. Mixtures of two metal ions can be titrated if one is Bi(3+) and the other Al(3+), Pb(2+), Zn(2+), Cu(2+), Cd(2+), La(3+), Ce(3+), Pr(3+), Nd(3+), Sm(3+), Gd(3+) or Er(3+). Aluminium alloys can be analysed via EDTA titrations, with these indicators.     

Studies on metallochromic indicators--II. Zincon and its mercury and zinc complexes as indicators in EDTA titrations

Zincon has been found to be an excellent indicator in the titration of mercury(II) with EDTA at pH 5.5-7. Moreover the mercury(II)-Zincon and zinc-Zincon systems have been found to be suitable indicators in the direct EDTA titrations of Pb(2+), Cd(1+) and Ca(2+). Interference studies of a number of cations and anions have been made. Chloride and bromide can be tolerated in the titration of mercury(II), up to equivalent concentrations.     

Complexometric determination of some toxic mixtures of ions using bromo-cresol orange with visual endpoint indication

A rapid and simple general complexometric method was presented for the determination of lead, cadmium and thallium or mercury or arsenic(V) in laboratory synthesized mixtures similar to those of some ores, minerals and alloys of such metals. The precision and accuracy attainable in successive titrations of Pb(2+), Cd(2+) and Tl(3+) or Hg(2+) or AsO(3-)(4) (As(5+)) with 0.05 and/or 0.01 mol 1(-1) solutions of disodium ethylenediaminetetraacetate (Na(2)EDTA) and standard Pb(NO(3))(2) of the same concentration using Bromo-Cresol Orange (BCO) as a new metallochromic indicator with visual endpoint indication were studied. For the analysis of a three component mixtures of the aforementioned ions, Tl(3+) was at first directly titrated with Na(2)EDTA at pH 0.5-1 (HNO(3)) using BCO as indicator. At the thallium endpoint an excess of Na(2)EDTA was added and the pH was adjusted at pH approximately 4.8 using hexamine-HNO(3) buffer (solution A). The excess EDTA was back-titrated with standard solution of Pb(NO(3))(2). 1,10-Phenanthroline (1,10-phen) was added to release the EDTA combined with Cd(2+), while thiosemicarbazide (TSC) was used to liberate the EDTA from the mercury-EDTA chelate. To determine AsO(3-)(4) ion in such type of mixtures the pH of (solution A) was raised to a value of 10 using ammonia buffer. Excess standard Mg(2+) solution was added and the formed precipitate of MgNH(4)AsO(4) was separated, dissolved and its magnesium content equivalent to AsO(3-)(4) was determined complexometrically using Eriochrome Black-T (EBT) indicator. The interference caused by different anions, cations and organic acids was investigated. A comparison of the indicators BCO and Xylenol Orange (XO) for successive titration of the studied metal ions was carried out. The proposed successive titration method was applied successfully to some real samples of ores, minerals and alloys of the studied metal ions and the results were satisfactory and agreed with those obtained by AAS.     

Application of a sulphide-selective electrode in the absence of a pH-buffer

Calibration of a sulphide electrode in the pH-range 9-12 has been studied as an e.m.f. vs. (pH - p[HS(-)]) function by measuring e.m.f. and pH in parallel. Calibration can also be done in this pH range by using a differential amplifier with a three-electrode measuring cell (glass, sulphide-selective and reference electrodes). The effects of an antioxidant (ascorbic acid) and a complexing agent (DCTA) on the calibration of the glass-sulphide electrode cell at pH < 5 were studied. The applicability of this end-point indicator cell has been demonstrated for titrations of Ag(+), Pb(2+) and Bi(3+) with Na(2)S.     

On the copper(II)-EDTA-par system for visual and photometric end-point detection in iron(III)-EDTA titrations

The copper(II)-EDTA-PAR system is proposed as indicator for direct EDTA titration of 0.2-20 mg of iron(III) in acetic acid medium. The precision and accuracy have been evaluated by spectrophotometric titration. Microtitrations determine down to 10 mug of iron. A logarithmic concentration diagram has been constructed to present the complex equilibria involved. In an interference study the masking agent ammonium fluoride was found to improve the end-point detection. The method has been applied successfully to practical standard samples and compares favourably with other EDTA titrations of iron.     

New masking procedure for selective complexometric determination of copper(II)

A study has been made of a new masking procedure for highly selective complexometric determination of copper(II), based on decomposition of the copper-EDTA complex at pH 5-6. Among the various combinations of masking agents tried, ternary masking mixtures comprising a main complexing agent (thiourea), a reducing agent (ascorbic acid) and an auxiliary complexing agent (thiosemicarbazide or a small amount of 1,10-phenanthroline or 2,2'-dipyridyl) have been found most suitable. An excess of EDTA is added and the surplus EDTA is back-titrated with lead (or zinc) nitrate with Xylenol Orange as indicator (pH 5-6). A masking mixture is then added to decompose the copper-EDTA complex and the liberated EDTA is again back-titrated with lead (or zinc) nitrate. The following cations do not interfere: Ag(+), Hg(2+), Pb(2+), Ni(2+), Bi(3+), As(3+), Al(3+), Sb(3+), Sn(4+), Cd(2+), Co(2+), Cr(3+) and moderate amounts of Fe(3+) and Mn(2+). The notable feature is that consecutive determination of Hg(2+) and Cu(2+) can be conveniently carried out in the presence of other cations.     

Effect of EDTA/NaF solutions on the orion Cu(II) ion-selective electrode

The titration of ethylenediaminetetra-acetic acid in fluoride medium with Cu(II) solution with the Orion Cu(II) ion-selective electrode as indicator, results (after several titrations) in a broad end-point which is unsatisfactory for exact analytical purposes. This effect has been found to arise from an enhanced rate of response to changes in EDTA concentration when the electrode has been exposed to an EDTA/NaF medium for prolonged periods.     

The chalcocite copper membrane electrode

The membrane electrode based on a synthetic chalcocite (Cu(2)S) single crystal responds primarily to the activity of copper(I) ions in solution. The experimental selectivity coefficient with respect to copper(II) ions is in good agreement with the value calculated on the basis of solubility products of both sulphides. The electrode has been calibrated with metal-ion buffers containing a strongly complexing ligand. TETREN, and can be used as an indicator in titrations of copper with EDTA and TETREN. Comparison of an experimental titration curve with one calculated with the aid of the program HALTAFALL showed good agreement in the case of TETREN, but there were discrepancies for the EDTA titration, which are attributed to the presence and complexation of copper(I) ions. The electrode has also been applied in metal titrations with Cu(2+) as indicator ion, though the potential changes observed were smaller than predicted. All titrations showed errors less than 1%.     

Application of various electrodes in potentiometric titration of calcium

In complexometric titrations various indicator electrodes may be employed for monitoring the course of titration and for detection of the end-point. Several of them, including the silver, mercury, bivalent cation membrane, calcium membrane and manganese dioxide electrodes were investigated and compared in their usefulness. As titrant, EDTA was mostly used, but results with similar chelating titrants were also obtained. The practical utility of the electrodes in titrations depends on their selectivity, magnitude of the end-point break and precision in determination of the end-point. For the electrodes studied, in some instances there is good correlation between the theoretical and experimental titration curves, but it is not always possible to predict the electrode response in the low activity range. In other cases poor correlation does not mean that reasonably good analytical results may not be obtained.     

3,3'-Dihydroxybenzidine-n,n,n',n'-tetraacetic acid as a metallofluorescent indicator in edta titrations

3,3'-Dihydroxybenzidine-N,N,N',N'-tetraacetic acid has been prepared and examined as a metallofluorescent indicator in compleximetric titrations. Copper(II) and lead(II) are determined by titration with EDTA in the presence of the indicator, the blue fluorescence of which is restored at the end-point. Manganese, zinc, cobalt and cadmium can also be determined if a dyestuff such as Rhodamine B is present along with the indicator.     

Stepwise photometric titrations

Stepwise titrations of several metals with photometric end-point detection are described. The equivalence points when 2 metal ions are titrated compleximetrically, can be detected if the conditional stability constants are sufficiently high in value even if there are only slight differences between the colours of the different species of the indicator compounds.The following systems were analysed by stepwise photometric titration using either metalphthalein or eriochrome black T as indicator: manganese-calcium; manganese-magnesium; calcium-magnesium; manganese-calcium-magnesium; zinc-magnesium, EDTA, DTPA and EGTA were used as titrants. A satisfactory accuracy was attained in each case. The results agreed with conclusions drawn from the theory of stepwise photometric titrations based on equilibrium calculations and absorbance values.     

Metal oxide electrodes as sensors in complexometric titrations

EDTA titrations of lead and manganese, and of some other ions by using these as indicator ions, have been followed potentiometrically with PbO(2) and MnO(2) electrodes. Explanations are put forward for the anomalies observed in the titration curves. With the MnO(2) electrode, formation of an Mn(III)-EDTA complex is responsible for the diminished potential breaks. With the PbO(2) electrode the decrease in the potential break and the distortion of the curves in acid solution may be due to reaction between electrode coating and titrant. The MnO(2) electrode has been used for titrations of Ba(2+) Ca(2+), Cd(2+) and Cu(2+) with errors < 1%.     

2-(3,5-二溴-2-吡啶偶氮)-5-二乙氨基苯酚作络合滴定指示剂连续测定铁和铝

对2-(3,5-二溴-2-吡啶偶氮)-5-二乙氨基苯酚作铁(Ⅲ),铜(Ⅱ)的配位滴定指示剂进行了研究.在pH1.8～2.0时用EDTA标准溶液滴定铁(Ⅲ).在滴定铁(Ⅲ)后的溶液中,加入对铝过量的EDTA标准溶液,在pH3.8～4.0煮沸下,铝(Ⅲ)与EDTA生成稳定的络合物,过量的EDTA用硫酸铜标准溶液滴定,从而测定铝(Ⅲ).     

Determination of calcium in silicate rocks by potentiometric titration with ethyleneglycol-bis-(2-Aminoethylether)tetraacetic acid and a calcium-selective electrode

The method reported for the determination of calcium in silicate rocks involves titration with ethyleneglycol-bis(2-aminoethylether)tetraacetic acid (EGTA) to a potentiometric end-point. A Crytur calcium-selective electrode is used; the selectivity constants (K_ca,x) are less than 10^-3 for Mg, Ba, Sr, K and Na. The method can be used for calcium contents of 2% or higher (and exceptionally for lower contents), in the presence of up to 60% Mg, 33% AI, 17% Fe, 5% Ba, 5% Ti, and 2.5% Mn. Al, Fe and Ti are masked with sulphosalicylic acid, barium is precipitated as its sulphate, and manganese is bound as its cyanide complex. If the magnesium content is less than that of calcium, EDTA can be used as titrant, magnesium being masked with acetylacetone.     

Natural monocrystalline pyrite as electrode material for potentiometric titrations in water

The possibility of applying natural monocrystalline pyrite as sensor for the potentiometric titration of acids in water was investigated. The potential of this electrode in aqueous solutions exhibits a sub-Nernst dependence. In fresh solutions the slope (mV/pH) is 33.9. The potential jumps at the titration end-point obtained in titrations of HCl, H(3)PO(4) and CH(3) COOH do not differ much from those obtained by the application of the glass electrode as the indicator one. The potentials in the course of the titration and at the titration end-point (TEP) are rapidly established. The results obtained in the determination of the investigated acids deviated for 0.16-0.34% with respect to those obtained by using the glass electrode as the indicator one.     

Interactions between the iron and the aluminum minerals during the heating of Venezuelan lateritic bauxites. II. X-ray diffraction study

Four samples of Venezuelan lateritic bauxites were heated to 300, 600 and 1000°C and the thermal reactions were studied by X-ray diffraction (XED) and by chemical extractability of silica and alumina. Gibbsite was converted to boehmite at 300°C, to an amorphous phase at 600°C and partly to corundum at 1000°C, with isomorphic substitution of Fe for some of the Al in the corundum structure. Goethite was converted to protohematite at 600°C and the hematite at 1000°C, with isomorphic substitution for Al for some of the Fe in both α-Fe₂O₃ varieties. Ti contributed by ilmenite is also occluded by the hematites. The occlusion of Ti takes place at 1000°C during the decomposition of the ilmenite and concomitant recrystallization of α-Fe₂O₃.     

Polythiol binding to biologically relevant metal ions

The coordination properties of three peptides with CXXC motif: Ac-GCASCDNCRACKK-NH(2), Ac-GCASCDNCRAAKK-NH(2) and Ac-GCASCDNARAAKK-NH(2) as donors of four, three and two thiol ligands for Ni(2+),Cd(2+), Zn(2+) and Bi(3+) were studied by potentiometric titrations, UV-Vis and CD spectra measurements. Since the stability of the complexes is closely connected with the amount of the metal-bound cysteine sulfurs, competition plots of the complexes of peptides with 2, 3 and 4 cysteines further prove the involvement of all thiols in the metal ion binding. Furthermore, the sulfur-bound zinc complexes appear to be much more stable than the sulfur-bound nickel ones. The stabilities of the studied complexes decreases in the series Bi(3+) ? Cd(2+) > Zn(2+) > Ni(2+).     

Photometric titrations—X The edta titration of iron(III) in the presence of high concentrations of bismuth

In solutions containing a high concentration of ammonium chloride, bismuth is masked as the chloro complex, and iron(III) can be titrated with EDTA to a photometric end-point using sulphosalicylic acid as the indicator. Up to a mole ratio Bi:Fe of about 2,000, good results are obtained. At higher ratios slightly high results are obtained for the iron. The influence of some other metal ions on the titration has been studied.     

Photometric complex-formation titration of submicromolar amounts of zirconium

Even in strongly acidic solution Zr(IV) forms polynuclear hydroxide complexes. In these compounds tetrameric units play a dominant role. When the Zr atoms in these units are interconnected through double OH-bridges (olated bonds) quantitative formation of Zr-EDTA is possible at room temperature. When the double OH-bridges are replaced by single oxygen-atom bridges (oxolated bonds) the units are less reactive. The oxolated tetramers are still capable of reacting quantitatively with EDTA if heated to about 100 degrees ; higher oxolated polymers are not. When these higher polymers are formed during the initial adjustment of conditions for a titration, large errors will be observed. By suitable treatment of the solutions oxolation can be restricted sufficiently to permit titrations with an error of less than 1%. Semi-Xylenol Orange has been found to be a suitable indicator for direct titrations; back-titrations are performed with Bi(3+), with PAR as indicator.     

Entwicklung eines universellen, preiswerten Interfaces zur Kopplung von Personal-Computern mit Analysenger?ten

Zusammenfassung Als weitere Einsatzmöglichkeiten des von den Autoren entwickelten Interfaces wird ein rechnergesteuertes Titrationssystem vorgestellt. Es können konventionelle Analysengeräte mit sehr unterschiedlichen Anforderungen an Hardware und Interfacing gleichzeitig vom Rechner gesteuert werden. Für Titrationen, deren Indikationssignal sich aus linearen Teilen zusammensetzt oder in eine solche Form umgerechnet werden kann, wird ein Steuerungs- und Auswertealgorithmus entwickelt.Mit dem beschriebenen System werden amperometrisch indizierte Titrationen von Bi(III) mit EDTA unter Verwendung einer DME als Indicatorelektrode durchgeführt. Die kleinste bestimmbare Menge beträgt 5×10^–7 Mol/40 ml (= 2,5 ppm) bei einer Standardabweichung von unter 1% relativ.

---

Development of an universal low-cost interface for coupling personal computers with analytical instrumentsPart III. Computer-controlled titrations. Amperometric titration of Bi(III) with EDTA as example

Summary The paper proposes a computer-controlled titration system as a further application of the interface constructed by the authors. The computer can control simultaneously a variety of conventional analytical devices with very different requirements to hardware and interfacing. The authors develop an algorithm to control and evaluate titrations whose indicator functions consist of linear parts or can be transformed to those.The system described carries out amperometric titrations of Bi(III) with EDTA by use of a DME as indicator electrode. Bi can be determined down to a level of 5×10^–7 mol/ 40 ml (= 2.5 ppm) with a relative standard deviation of less than 1%.

---

---

Teil II siehe [1]