光化学反应在流动注射分析中的应用研究 Ⅳ.亚甲基蓝光化学反应体系测定抗坏血酸

基于抗坏血酸光化学还原亚甲基蓝光化学反应,建立了流动注射光化学反应测定抗坏血酸的新方法。方法线性范围为0.12～5.60μg/ml,进样频率为55～60次/h。应用于医用维生素C片剂中抗坏血酸的测定,结果满意。     

Kinetic method for determination of ascorbic acid on flow injection system by using its catalytic effect on the complexation reaction of an ultra sensitive colorimetric reagent of porphyrin with Cu(II)

A kinetic method performed on a flow injection system is described for the determination of ascorbic acid by using its catalytic effect on the complexation reaction of Cu(II) with 5,10,15,20-tetrakis(4-N-trimethyl-aminophenyl)porphyrin. The characteristic spectrum of porphyrin (Soret band), which shows intense absorption around 400 nm (epsilon>2.0 x 10(5) cm(-1)M(-1)), was used first time for determining ascorbic acid. By incorporating the complexation reaction into a flow injection system, ascorbic acid could be determined either over a broad dynamic range of 0.1-1000 microg/ml or at a trace level below 5 ng/ml. Good repeatability was also achieved by testing a working standard of 0.1 microg/ml with 10 injections at a throughput of 35 h(-1), obtaining a relative standard deviation of 0.11%. Substances like amino acids, vitamins, sugars, organic acids and metal ions, showed no or little interference even present at high concentrations. The method was validated in the determination of ascorbic acid contents of some commercially available soft drinks by comparison with the official 2,6-dichloroindophenol method with reasonable agreement.     

Multilayer assembly of Prussian blue nanoclusters and enzyme-immobilized poly(toluidine blue) films and its application in glucose biosensor construction

A multilayered glucose biosensor via sequential deposition of Prussian blue (PB) nanoclusters and enzyme-immobilized poly(toluidine blue) films was constructed on a bare Au electrode using electrochemical methods. The whole configuration of the present biosensor can be considered as an integration of several independent hydrogen peroxide sensing elements. In each sensing element, the poly(toluidine blue) film functioned as both the supporting matrix for the glucose oxidase immobilization and the inhibitor for the diffusion of interferences, such as ascorbic acid and uric acid. Meanwhile, the deposited Prussian blue nanocluster layers acts as a catalyst for the electrochemical reduction of hydrogen peroxide formed from enzymatic reaction. Performance of the whole multilayer configuration can be tailored by artificially arranging the sensing elements assembled on the electrode. Under optimal conditions, the biosensors exhibit a linear relationship in the range of 1 x 10(-4) to 1 x 10(-2) mol/L with the detection limit down to 10(-5) mol/L. A rapid response for glucose could be achieved in less than 3 s. For 1 mM glucose, 0.5 mM acetaminophen, 0.2 mM uric acid, and 0.1 mM ascorbic acid have no obvious interferences (<5%) for glucose detection at an optimized detection potential. The present multilayered glucose biosensor with a high selectivity and sensitivity is promising for practical applications.     

Kinetic spectrofluorimetric determination of trace ascorbic acid based on its inhibition on the oxidation of pyronine Y by nitrite

A highly sensitive spectrofluorimetric method is proposed for the determination of trace amount of ascorbic acid using a new indication. The method is based on the inhibition of ascorbic acid on the oxidation of pyronine Y (PRY) by nitrite. The detection limit for ascorbic acid is 0.012 microg ml(-1), the linear range of the determination is 0.02-0.36 microg ml(-1). Analytical parameters, such as reagent concentration, pH, reaction temperature and time, were optimized. The relative standard deviations of eleven replication determinations of 0.12 and 0.24 microg ml(-1) ascorbic acid were 1.4 and 0.72%, respectively. This method has been used to determine ascorbic acid in pharmaceuticals, vegetables, fruits and soft drink with satisfactory results.     

Catalytic Kinetic Determination of Trace Amounts of Copper with Polarographic Detection

Abstract

This method is based on the catalytic effect of copper(II) on the redox reaction between acid chrome dark blue and ascorbic acid in acetic acid-sodium acetate buffer solution and 1,10-phenanthroline as an activator. Acid chrome dark blue exhibits a sensitive polarographic wave at -0.375V Vs. SCE and change of acid chrome dark blue concentration is traced by a polarographic detection technique. The detection limit and the linear range of copper(II) are 2.34ng/ml and 5 to 50ng/ml respectively. This new catalytic method has been applied to the determination of copper in human hair, with satisfactory results.     

Fluorimetric determination of total ascorbic acid by a stopped-flow mixing technique

A simple, rapid and automatic fluorimetric method for the determination of total ascorbic acid is described. The method makes use of the stopped-flow mixing technique in order to achieve the rapid oxidation of ascorbic acid by dissolved oxygen to dehydroascorbic acid, which then reacts with o-phenylenediamine to form a fluorescent quinoxaline. The initial rate and fluorescence signal of this system are directly proportional to the ascorbic acid concentration. The calibration graph was linear over the range 0.1-30 microg ml(-1) (kinetic method) and 0.25-34 microg ml(-1) (equilibrium method). The precision (% RSD) was close to 0.5%. The method has been used for the determination of ascorbic acid in pharmaceutical formulations, fruit juices, soft drinks and blood serum.     

铜催化抗坏血酸还原酸性铬深蓝动力学光度法测定痕量铜

在乙酸-乙酸钠介质中,以邻菲罗啉为活化剂,铜对抗坏血酸还原酸性铬深蓝具有强烈的催化作用,测定了反应的表观活化能,探讨了反应机理,建立了测定痕量铜的催化动力学新方法,测定的线性范围为2.5～60ng·ml~(-1),直接用于食品及人发中铜的测定。结果满意。     

Flow injection kinetic spectrophotometric determination of ascorbic acid based on an inhibiting effect

A rapid and sensitive flow-injection kinetic spectrophotometric method is proposed for the determination of ascorbic acid. The procedure is based on the inhibiting effect of ascorbic acid on the enhancing effect of oxalate on the potassium dichromate-potassium iodide/rhodamine 6G system. The detection limit and linear ranges are 0.08 and 0.10-4.00 microg/ml, respectively. The relative standard deviation of 11 replicate measurements is less than 2.0%. This method has been successfully used to determine ascorbic acid in pharmaceuticals, tomatoes and oranges.     

Cu(Ⅱ)-抗坏血酸-三氯偶氮胂体系催化动力学光度法测定痕量铜的研究

在乙酸-乙酸钠缓冲溶液(pH4.4)中,以Cu(Ⅱ)催化抗坏血酸还原三氯偶氮胂褪色为指示反应,建立了测定痕量Cu(Ⅱ)的新方法.测定了反应级数和表观活化能.在70℃水浴中加热6min,测定的灵敏度为3.1×10~(-12)g·ml~(-1),线性范围为0～70ng/25ml.用于测定几种中草药样品中的铜,结果满意,相对标准偏差小于3%.     

Extraction spectrophotometric method for the determination of ascorbic acid in pharmaceutical preparations, urine and fruit juices with potassium iodate

An indirect determination of ascorbic acid is based on extraction of the iodine produced by reduction of potassium iodate. Beer's law is obeyed over the range 0.02-0.36 mg/ml ascorbic acid.     

Spectrophotometric method for the determination of paraquat in water, grain and plant materials

A sensitive spectrophotometric method for the determination of paraquat using ascorbic acid (an easily available reducing agent) is described. Paraquat is reduced with ascorbic acid in alkaline solution to give a blue radical ion with an absorbance maximum at 600 nm. Beer's law is obeyed in the range 12-96 micrograms of paraquat in 10 ml of the final solution (1.2-9.6 ppm). The important analytical parameters and the optimum reaction conditions were evaluated. The method was applied successfully to the determination of paraquat in water, grain and plant materials.     

Specific Differential Spectrophotdmetric Determination of Ascorbic Acid in Plants Using Ascorbate Oxidase

Abstract

A specific enzymic-differential spectrophatometric method is described and evaluated for the determination of ascorbic acid in vegetables and medicinal plants. It is based on the absorbance measurement at 593 nm of the complex of ferrous ion with 2,4,6-tris (pyridyl)-S-triazine, which is produced by reduction of ferric ion by ascorbic acid, versus a blank sample treated with ascorbate oxidase. The absorbance difference is linearly related to ascorbic acid from 10 to 100 ug/ml. A standard deviation of ±0.5 ug/ml (n=5) and a mean recovery of 101.47. (98.3–103.3%.) from spiked plant extracts, were found. The method was used to determine ascorbic acid in various plants of the Greek flora. Acacia cvanophvlla was found to be the richest source tested for ascorbic acid (89.6 mq/100 q of leaves). The method is very simple and can be used in routine analysis.     

Kinetic determination of ultramicro amounts of copper

A new catalytic reaction is proposed and a kinetic method developed for the determination of ultramicro amounts of Cu(II) on the basis of its catalytic activity in oxidation of the 2-thiosemicarbazone of sodium 1,2-naphthoquinone-4-sulphonate by hydrogen peroxide in the presence of ascorbic acid. Under optimal conditions the sensitivity of the method is 0.25 ng/ml. The relative error is 4.8-18.2% for the concentration range 5-0.8 ng/ml. Most foreign ions do not change the rate of the catalysed reaction. Co(2+) and I(-) catalyse the reaction, Ni(2+) extensively inhibits it, and in the presence of EDTA only the uncatalysed reaction takes place.     

测定抗坏血酸的亚甲蓝褪色光度法

确定了亚甲蓝与抗坏血酸褪色反应的最佳条件,在 pH=2的缓冲溶液和对氨基苯磺酸存在的条件下,抗坏血酸能够很快还原亚甲蓝并使之褪色,褪色反应的体系具有很好的稳定性。该反应的摩尔吸光系数为 2.0× 103 L· mol－ 1· cm－ 1,线性范围 0.4～ 40.0 mg/L。该法具有优良的选择性,常见的能够与抗坏血酸共存的阴、阳离子和还原剂、表面活性剂不干扰测定,应用于药品、饮料、蔬菜中抗坏血酸的测定,获得满意结果。     

Indirect spectrophotometric determination of ascorbic acid with ferrozine by flow-injection analysis

A FIA indirect spectrophotometric determination of ascorbic acid was developed using its reducing action on Fe(III) in acidic medium and following the spectrophotometric determination of the reduced iron by using sodium 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine-4',4'-disulphonate (ferrozine) as chromogenic reagent in buffered medium (pH 5.5) and monitoring the absorbance signal at 562 nm. A three-line manifold with two reaction coils was used: in the first reaction coil, ascorbic acid reduces Fe(III) to Fe(II); and in the second one, the complexation reaction is developed. The linear range of the method was 0.5-10 mug ml(-1) of ascorbic acid, the detection limit being 0.028 mug ml(-1). The proposed method was sensitive, rapid (sampling rate of 90 samples h(-1)) and reproducible (RSD 0.19%, n=10). Satisfactory results were obtained in the determination of ascorbic acid in pharmaceutical preparations, fruit juices and urine testifying the applicability of the method to real samples.     

Simultaneous determination of dopamine and ascorbic acid at a poly(toluidine blue) modified electrode.

A novel polymer modified electrode is discussed in this paper. This resulting electrode can catalyze remarkably toward the electrochemical oxidations of dopamine (DA) and ascorbic acid (AA). Moreover, it can clearly discriminate the electrochemical oxidations of DA from that of AA based on their semi-derivative voltammograms. Hence, a simultaneous determination of DA and AA based on semi-derivative voltammetry at a poly(toluidine blue) modified electrode is suggested. The detection linear range for DA is 0.4 micromol L(-1)-1.5 mmol L(-1), and AA 0.2 micromol L(-1)-2.4 mmol L(-1), respectively. The resulting modified electrode was tentatively used to determine DA and AA in brain tissue.     

The nature of the salt error in the Sn(II)-reduced molybdenum blue reaction for determination of dissolved reactive phosphorus in saline waters

Sn(II) is a well-known reductant used in the formation of phosphomolybdenum blue for the determination of dissolved reactive phosphorus (DRP) in waters because it provides rapid and quantitative reduction. However, in saline waters, this method suffers from a salt error which causes a significant decrease in sensitivity. This phenomenon has never been adequately explained in the literature. The Murphy and Riley method, which uses Sb(III) and ascorbic acid for the reduction step, is preferred for DRP determination in saline waters because it is unaffected by salinity, but it exhibits a sensitivity approximately 30% lower than that when Sn(II) is used as the reductant without Cl⁻ interference. This study investigates the processes causing the salt error and possible ways of minimizing it, so that the benefits of Sn(II) reduction on the molybdenum blue reaction rate and sensitivity may be exploited in the determination of low levels of DRP in marine and estuarine waters. It has been established that the salt error is caused by the formation of Sn(IV) chloro-complexes which compete with the formation of Sn(IV)-substituted phosphomolybdenum blue, forcing the reaction to proceed via the much slower, less favourable process of direct reduction that occurs in methods using organic reductants such as ascorbic acid.     

Selective spectrophotometric determination of ascorbic acid in drugs and foods

A new analytical method was developed for the determination of ascorbic acid. The method is based on the reaction of ascorbic acid with 4-chloro-7-nitrobenzofurazane (NBD-Cl) in the presence of 0.2M sodium hydroxide, where a bluish green colour (lambda(max) 582 nm) is developed after dilution with 50% (v/v) aqueous acetone solution. Beer's law was obeyed in a concentration range of 5-20 microg ascorbic acid/ml with a good correlation coefficient (r = 0.9990). The method was found to be highly specific for the determination of ascorbic acid in the presence of dehydro-ascorbic acid, all other vitamins and minerals possibly present in multivitamin preparations, rutin, salicylamide, acetyl salicylic acid, paracetamol, caffeine, phenylephrine hydrochloride and dipyrone. Moreover, the proposed procedure was also successfully applied for the determination of ascorbic acid in some canned and fresh fruit juices, some vegetables and infant milk products without interference from coloured and other substances present in the plant extracts.     

Direct spectrophotometric determination of iron in non-ferrous alloys

Disodium 3-(2-pyridyl)-1,2,4-triazine-5,6-di(4'-phenylsulphonate) is used for determination of iron in metal analysis. High selectivity is achieved by using a ligand buffer and substoichiometric masking. Interference from 0.9 mg of Cu(II) can be completely eliminated by combined reduction and masking with ascorbic acid and thiosemicarbazide. Beer's law is obeyed over the range 0.4-1.6 mug/ml iron in the final solution, with a standard deviation of 0.02 mug/ml. The method has been successfully applied to determination of iron (without preseparation) in a number of non-ferrous metals and alloys, with a coefficient of variation of 1.2-5.0%.     

Kinetics of oxidation of ascorbic acid by methylene blue in acid solutions

We propose a kinetic scheme for reduction of methylene blue by ascorbic acid, characterized by the existence of two pathways: outer-sphere reduction of methylene blue according to a second-order reaction, and reduction through formation of a 11 complex with ascorbic acid.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 29, No. 5, pp. 424–429, September–October, 1993.