Simultaneous third-derivative spectrophotometric determination of copper and nickel in iron alloys and aluminium alloy

A method is proposed for the simultaneous determination of copper and nickel by third-derivative spectrophotometry based on the absorption spectra of their complexes with cyanide ion in the ultraviolet range. The method allows the determination of 0.55-5.8 mug/ml of copper and 0.55-6.8 mug/ml of nickel. The relative standard deviation for 11 determinations of 1.5 mul/ml of copper and nickel were 0.78 and 0.72%, respectively. The detection limits were 0.10,mug/ml for nickel and 0.13 mug/ml for copper. The method has been applied to direct determination of copper and nickel in iron alloys and an aluminium alloy without any separation.     

Continuous spectrophotometric determination of copper, nickel and zinc in copper-base alloys by flow-injection analysis

Flow-injection methods have been developed for the determination of copper, nickel and zinc in copper-base alloys, including several types of brasses, deoxidized copper, beryllium copper and German silver. The system for copper and nickel involves the measurement of the absorbance of the copper(II) and nickel(II) aquo-complexes at 805 and 410 nm, respectively, after simple dissolution of the sample in a nitric acid-phosphoric acid mixture. The system needs no further reagents and the sample solutions can be analysed at rates of up to 280 /hr for copper (or nickel in German silver) without any carry-over. The system for zinc consists of automatic dilution of the injected sample with a thiosulphate-acetate buffer solution and the subsequent measurement of the absorbance of the zinc-Xylenol Orange complex at 568 nm. This system permits analysis rates of up to 90/hr for zinc solutions, with no carry-over. The procedures have been applied to standard copper-base alloys. The results agreed satisfactorily with the certified values. The precision ranges are 0.2-0.7% for copper and nickel and 0.5-0.8% for zinc.     

Spectrophotometric determination of nickel in copper-base alloy with 2-(2-thiazolylazo)-p-cresol

A spectrophotometric method for determination of nickel in copper-base alloy with 2-(2-thiazolylazo)-p-cresol (TAC) is described. The interferences of foreign ions can be eliminated by masking with a mixture of sodium tartrate and sodium thiosulphate. The nickel-TAC complex has low solubility in water, but is soluble in aqueous ethanol. Beer's law is obeyed for 20-70mug of nickel in 50 ml of solution, at pH 5.7. The molar absorptivity at 580 nm is 2.6 x 10(4)l.mole(-1).cm(-1). The method has been applied successfully to determination of nickel in reference samples.     

Simultaneous spectrophotometric determination of humic acid and iron in water

A simple and rapid method for the determination of humic acid and iron in solution is described. Two absorbance measurements are required, one on an untreated sample aliquot, and the other on an aliquot treated to enhance iron absorptivity. The method requires sample volumes of less than 15 ml and is sensitive enough for direct application to most natural waters. Limits of detection for each component vary with concentration of the other, but 0.01 mg 1^?1 for humic acid and 0.04 μM for iron can be achieved. For six natural waters, determinations based on independent calibration curves for each component gave results 6–40$ higher for iron, and 6–29% higher for humic acid, than results obtained by the proposed method. The interference of fulvic acid and the use of different humic acid standards are examined.     

Simultaneous spectrophotometric determination of traces of cobalt,nickel and copper with dithio-oxamide

The cobalt, nickel and copper complexes of dithio-oxamidc have been characterized in terms of color, effect of pH, structure in solidion, order of addition of reagents, adherence to Beer's law and sensitivity. The reactivity of the reagent to other ions has been reported. A method for the simultaneous spectrophotometric determination of cobalt, nickel and copper has been developed. the results of the application of this procedure to synthetic samples and to several National Bureau of Standards Samples are given.     

Simultaneous spectrophotometric determination of cobalt, nickel and copper with 2,3-quinoxaline- dithiol

In aqueous ethanol cobalt(II), nickel(II) and copper(I) react instantaneously with 2,3-quinoxalinedithiol at pH 2 to form strongly coloured complexes exhibiting absorption maxima at 510, 606 and 665, and 625 nm, respectively. At pH 6 the reaction of copper can be virtually eliminated, while the cobalt and nickel reactions show only small decreases in sensitivity. This behaviour has been made the basis of a rapid method for the simultaneous determination of these three elements. The absorbances of the complexes have been found to be additive for all combinations of these elements in which the individual concentrations have been varied from approximately 0.1 to 1 ppm. A least-squares estimate of the concentration of any of the elements may be readily obtained by using a simple linear equation based on the absorbance readings and a set of constants derived from the spectrophotometric data. The analyses of seven synthetic solutions and four NBS Standard Reference Materials yielded a maximum error of 6.0% and an average error of 1.6%.     

利用混合线性分析分光光度法同时测定微量铜、锌、镍

研究以5 Br PADAP为显色剂,用混合线性分析分光光度法同时测定铜、锌、镍。在pH8.2的硼砂 盐酸缓冲溶液中,Cu2 、Zn2 、Ni2 分别与5 Br PADAP形成稳定的配合物,其吸收光谱相互重叠。用一种新的数学模型,即混合线性分析进行光谱分辨,各组分的纯光谱则用最小二乘法求得。讨论了反应条件、测量波长的选择等因素的影响。铜、锌、镍的标准回收率分别为95.0%～102.5%、94.2%～101.3%和96.2%～104.2%。应用于铝合金中铜、锌、镍的同时测定。     

Simultaneous spectrophotometric determination of iron, nickel and cobalt in micellar media by using direct orthogonal signal correction-partial least squares method

A very simple and selective spectrophotometric method for simultaneous determination of iron(II), nickel(II) and cobalt(II) based on formation of their complexes with 1-(2-pyridylazo)-2-naphtol (PAN) in micellar media is described. Although the complexes of Fe(II), Ni(II) and Co(II) with reagent show a spectral overlap, they have been simultaneously determined by partial least squares (PLS) with and without preprocessing step using direct orthogonal signal correction (DOSC). The linear range was 0.30-4.50 μg ml⁻¹ for Co(II), 0.20-3.00 μg ml⁻¹ for Ni(II) and 0.30-5.00 μg ml⁻¹ for Fe(II). The results obtained by the PLS and DOSC-PLS were statistically compared. Interference effects of common anions and cations were studied and the proposed method was also applied satisfactorily to the determination of Fe(II), Ni(II) and Co(II) in synthetic samples.     

Simultaneous determination of cobalt,nickel and iron by multi-wavelength spectrophotometry

A method for the simultaneous spectrophotometric determination of cobalt, nickel and iron based on the formation of their complexes with 1,5-bis(di-2-pyridylmethylene) thiocarbonohydrazide is proposed. The absorption curves of these complexes overlap severely in the scanning range 390–510 nm. The analyte concentrations are calculated by a least squares fit of the pure spectra to the mixture spectra, which therefore makes the simultaneous determination of these metallic ions possible without tedious pretreatment. The detection limits afforded by the proposed method range from 0.05 g/ml for Fe and Ni to 0.1 g/ml for Co. Root-mean-squared errors of prediction of 0.085 g/ml for Co, 0.048 g/ml for Ni and 0.1172 g/ml for Fe were obtained using the wavelength range 400–510 nm and 0.147 g/ml for Co, 0.107 g/ml for Ni and 0.127 g/ml for Fe using the wavelength range 420–434 nm. The effect of interferences is studied and the proposed method is applied to analysis for the above elements in synthetic samples and real samples, such as biological materials and alloys.     

Simultaneous determination of iron and aluminium by differential kinetic spectrophotometric method and chemometrics

A differential kinetic spectrophotometric method was researched and developed for the simultaneous determination of iron and aluminium in food samples. It was based on the direct reaction kinetics and spectrophotometry of these two metal ions with Chrome Azurol S (CAS) in ethylenediamine-hydrochloric acid buffer (pH 6.3). The results were interpreted with the use of chemometrics. The kinetic runs and the visible spectra of the complex formation reaction were studied between 540 and 750 nm every 30 s over a total period of 285 s. A set of synthetic metal mixture samples was used to build calibrations models. These were based on the spectral and kinetic two-way data matrices, which were processed separately by the radial basis function-artificial neural network (global RBF-ANN) method. The prediction performance of these models was poorer than that from the combined kinetic-spectral three-way array, which was similarly processed by the same method (% relative prediction error (RPE_T) = 5.6). These results demonstrate that improved predictions can be obtained from the data array, which has more information, and that appropriate chemometrics methods can enhance analytical performance of simple techniques such as spectrophotometry.Other chemometrics models were then applied: N-way partial least squares (NPLS), parallel factor analysis (PARAFAC), back propagation-artificial neural network (BP-ANN), single radial basis function-artificial neural network (RBF-ANN), and principal component neural network (PC-RBF-ANN). There was no substantial difference between the methods with the overall %RPE_T range being 5.0-5.8. These two values corresponded to the NPLS and BP-ANN models, respectively. The proposed method was applied for the determination of iron and aluminium in some commercial food samples with satisfactory results.     

Simultaneous spectrophotometric determination of cobalt and nickel by partial least square regression in micellar media

Diphenycarbazone has been used for the simultaneous determination of cobalt and nickel by partial least square regression method. DPC complexes of cobalt and nickel at pH 7-10 are of pink color, which are soluble in TX-100 micellar media. A partial least square multivariate calibration method for the analysis of binary mixtures of cobalt and nickel was developed. The total relative standard error for applying the PLS method was calculated. The accuracy and reproducibility of the determination method for various known amounts of Co(II) and Ni(II) in their binary mixtures were tested. The effects of diverse ions on the determination of cobalt and nickel to investigate the selectivity of the method were also studied. The proposed method was applied to the synthetic binary mixtures, alloys and pharmaceutical samples.     

偏最小二乘分光光度法同时测定痕量铁、锰、铜、锌、钴和镍

痕量Fe^3 ,Mn^2 ,Cu^2 ,Zn^2 ,Co^2 ,Ni^2 与2－（5－溴－2－吡啶偶氮）－5－二乙氨基苯酚（5－Br-PADAP)和溴化十六烷基三甲基铵（CTMAB）在PH8．3时发生高灵敏显色反应，所形成的三元胶束络合的吸收光谱严重重叠，采用偏最小二乘法（PLS）辅助分光光度法测定了合成试样及饲料中上述6种痕量组分，结果表明，PLS法是化学计量学中一种可适用于基体较复杂的实际试样中痕量组分分光度同时测定的多元计算方法。     

Extraction and spectrophotometric determination of nickel with 2-hydroxyacetophenone oxime and simultaneous determination of copper and nickel

It is observed that 2-hydroxyacetophenone oxime can be used for the quantitative extraction of nickel in the pH range 6.6-7.8 into methyl isobutyl ketone. The organic layer shows maximum absorbance at 375 nm. Beer's law is obeyed over the range 1-6 ppm. The colour of the organic layer is stable for more than 48 hr. Interferences have been studied and methods are suggested for their elimination. Copper and nickel are both quantitatively extracted at pH 7 and can be determined simultaneously and accurately in the range 1-6 microg/ml for copper and 1-4 microg/ml for nickel.     

Simultaneous purification and spectrophotometric determination of nickel present in as-prepared single-walled carbon nanotubes (SWCNT)

The quality of single-walled nanotubes (SWCNT) is usually assessed by means of electron microscopic techniques or Raman spectroscopy. However, these sophisticated techniques are not widely available and do not reliably estimate the impurities in highly heterogeneous samples containing metal particles, fullerenes and other carbonaceous materials. We have developed a simple, inexpensive and convenient spectrophotometric method to assess the purity of arc-discharge grown as-prepared SWCNT. Purification process consists of initial gas phase oxidation and refluxing with nitric acid at the optimal conditions including short time period during acid refluxing. We have shown that this method could remove the metal particles effectively with a good yield of high quality SWCNTs, as shown by the spectrophotometric and scanning tunneling microscope studies described here. The extent of removal of the nickel present in as-prepared carbon nanotube sample is followed by spectrophotometeric analysis of the dissolved nickel analyte. The composition of nickel in the SWCNT sample is found to be 17.56%. The method is based on the chelating of Ni²⁺ with dimethylglyoxime in ammoniacal citrate medium to form nickel dimethylglyoxime complex. A second stage purification of SWCNT eliminates the residual metal particles. The purified SWCNT has been studied using scanning tunneling microscopy which shows clearly resolved individual carbon nanotubes.     

Spectrophotometric and derivative spectrophotometric determination of nickel with hydroxynaphthol blue

The reaction of nickel(II) cation with hydroxynaphthol blue (HNB) in aqueous media at pH 5.2–6.0 results in a red complex that is stable for at least 2h. Beer's Law is obeyed up to 3.2 g/ml of nickel(II) with an apparent molar absorptivity of 1.38 × 10⁴l/mol/cm at 563 nm. This paper proposes procedures for nickel determination by ordinary and first-derivative spectrophotometry. The results demonstrate that the linear dynamic range is 0.08–3.20 g/ml with a limit of detection of 23 ng/ml for ordinary spectrophotometry, compared with 21–800 ng/ml and 6 ng/ml, respectively, for first-derivative spectrophotometry. Calcium(II), magnesium(II), barium(II), strontium(II), cadmium(II), lead(II), manganese(II), bismuth(III) and molybdenum(VI) ions do not interfere for at least 1001 mass ratios. The main interferents are cobalt(II), titanium(IV), aluminium(III), mercury(II) and copper(II). The interferences of titanium(IV), aluminium(III), zirconium(IV) and iron(III) can be masked by fluoride and mercury(II) and copper(II) with thiosulfate or thiourea. The derivative method is applied to nickel determination in standard brasses and the results demonstrate that there is no significant difference between the results and certified values at the 95% confidence level.     

Simultaneous kinetic spectrophotometric determination of vanadium(V) and iron(III)

Vanadium(V) and iron(III) can be determined simultaneously at pH 2 and 25 degrees C by a single experiment using their kinetic effect on the oxidation of indigo carmine by bromate which goes through an induction period and then decreases in absorbance, at lambda(max), 612 nm. The rate of the color-fading of indigo carmine is proportional to the concentration of vanadium and is independent of the concentration of iron. The length of the induction period of the reaction is related to the concentration of iron and is independent of the concentration of vanadium. Concentrations of 0.3-2 (mug ml(-1)) vanadium(V) and 6-12 (mug ml(-1)) iron(III) were determined with mean relative errors of 2.7 and 1.6%, respectively. The interference effects of various cations and anions on determination of mixtures of vanadium and iron is reported. Application of the method to real samples and several mixtures of standard solutions are performed which gave acceptable results.     

Simultaneous spectrophotometric determination of molybdenum and iron with salicylaldehyde thiosemicarbazone,and application to the analysis of steels

Summary Salicylaldehyde thiosemicarbazone reacts with molybdenum (VI) in mineral acid solution, in the presence of stannous chloride, to produce a 11 red-violet complex (_max=520 nm,=4.8×10³l·mole^–1·cm^–1). Iron(II and III) forms a green 12 complex, in ammonia-ammonium chloride solution (_max=590 nm,=1.7×10³l· mole^–1·cm^–1). Both complexes have been used with success in the photometric estimation of molybdenum and iron in mixtures. Molybdenum may be determined in presence of 40 times its weight of iron. Iron may be determined in presence of twice its weight of molybdenum. The reagent can be applied to the analysis of steels. The interferences of some metallic ions have been examined.

---

Zusammenfassung Salicylaldehydsemicarbazon reagiert mit Molybdän(VI) in mineralsaurer Lösung in Gegenwart von Zinn(II)chlorid unter Bildung eines rot-violetten 11-Komplexes (_max=520 nm;=4,8·10³ l·Mol^–1·cm^–1). Eisen (II und III) bildet einen grünen 12-Komplex in einer Ammoniak-Ammoniumchloridlösung (_max=590nm;=l,7·10³ l·Mol^–1·cm^–1). Beide Komplexe eignen sich zur photometrischen Bestimmung von Mo und Fe in Gemischen. Mo kann in Gegenwart der 40fachen Gewichtsmenge Fe bestimmt werden, Fe läßt sich neben der doppelten Gewichtsmenge Mo bestimmen. Das Reagens eignet sich für die Stahlanalyse. Störungen durch metallische Fremdionen wurden überprüft.

     

Derivative spectrophotometric determination of nickel using Br-PADAP

A major problem with spectrophotometric methods for nickel is cobalt interference, because many of the reagents for nickel also react with cobalt. In this work, the interference of cobalt in the determination of nickel using 2-(5-bromo-2-pyridylaxo)-5-diethylaminophenol (Br-PADAP) was eliminated by the use of derivative spectrophotometry, using the zero-crossing method for evaluation of the derivative signal. Br-PADAP reacts with nickel(II) in the presence of Triton X-100 to form a red complex with absorption maxima at 530 and 562 nm. The reactions parameters and the conditions for the measurements of the first-derivative signal were studied and the results demonstrated that using the derivative technique, Br-PADAP can be used for nickel determination with a selectivity higher than that of ordinary spectrophotometry and with a limit of detection of 0.2 ng ml(-1). The pH should be in the range 5.0-6.0 using an acetate buffer. The determination of nickel in the presence of cobalt was performed with conventional and derivative procedures, and the results demonstrated that only the derivative method should be used and, of the methods used for evaluation of the derivative signal, the zero-crossing method is the best. The proposed procedure was used for nickel determination in steels standards. The results demonstrated that the procedure has satisfactory accuracy and precision. Cobalt interference can be also eliminated by using dual-wave-length spectroscopy.     

Simultaneous determination of iron, cobalt, nickel and copper by UV-visible spectrophotometry with multivariate calibration

A method for the simultaneous spectrophotometric determination of the divalent ions of iron, cobalt, nickel and copper based on the formation of their complexes with 1,5-bis(di-2-pyridylmethylene) thiocarbonohydrazide (DPTH) is proposed. The resolution of quaternary mixtures of these metallic ions was accomplished by several chemometric approaches. A comparative study of the results obtained for simultaneous determinations in mixture by using principal component regression (PCR) and partial least-squares regression (PLS-1 and PLS-2) for absorbance, first-derivative and second-derivative data is presented. In general, the best recovery values are obtained by the PLS-2 method for absorbance data. This procedure allows the simultaneous determination of the cited ions in alloys and biological materials Good reliability of the determination was proved.