苯并芘DNA加合物anti-BPDE-N^2-dG四种立体异构体的合成及色谱分离

体外合成了苯并芘DNA加合物-邻二醇环氧苯并芘-脱氧鸟苷加合物(anti-BPDE-N2-dG)四种立体异构体(两对手性异构体)。通过优化体外反应条件,anti-BPDE-N2-dG四种异构体的合成产量较现有合成方法提高了2倍多,为定量检测生物体中anti-BPDE-N2-dG提供了标准品。并首次将五氟苯基色谱柱应用于该立体异构体的色谱分离提纯,通过优化色谱条件,采用常规的五氟苯基色谱柱(250 mm×4.6 mm,5μm),以乙腈-0.1%甲酸水(22.5∶77.5)为流动相,流速1.2 mL/min条件下,45 min内即可分离提纯四种立体异构体。该方法与常规C18柱(250 mm×4.6 mm,5μm)需要160 min,苯基柱(250 mm×4.6 mm,5μm)需要85~100 min才能将四种立体异构体实现色谱分离相比,缩短了分离时间,提高了提纯效率。通过紫外吸收光谱、质谱、圆二色谱对四种立体异构体进行表征,确定出峰顺序为trans(-)、trans(+)、cis(+)、cis(-)-anti-BPDE-N2-dG。此外,利用高效液相色谱-串联质谱(HPLC-MS/MS)检测anti-BPDE-N2-dG四种立体异构体标准品时,使用常规的五氟苯基色谱柱可在30 min内完成分离检测,与相同规格的苯基柱需要60 min相比提高了检测效率。     

2-甲基-3-(4-对甲氧基苯基)-5-(3-甲氧基苯基)异噁唑啉及其生物活性

采用1,3-偶极环加成反应合成了2-甲基-3-对甲氧基苯基-5-间甲氧基苯基异噁唑啉,分离了顺、反异构体,采用核磁共振氢谱分析表征了顺反异构体的谱图行为,对异构体的生物活性进行了测定,新杀菌剂2-甲基-3-对甲氧基苯基-5-间甲氧基苯基异噁唑啉对病菌的有效成分为反式结构,顺式体为无效成分.     

高效液相色谱检测反应香精中的2-氨基-N-甲基-5-苯基咪唑并吡啶(PhIP)方法研究

建立了用高效液相色谱快速检测反应香精中2-氨基-N-甲基-5-苯基咪唑并吡啶的方法. 反应香精中的2-氨基-N-甲基-5-苯基咪唑并吡啶用二甲基甲酰胺直接超声振荡提取; 高效液相色谱的色谱柱为Eclipse XDB-C18 (250 mm×4.6 mm, 5 μm); 流动相为V(二甲基甲酰胺)∶V(甲醇)∶V(水)=8∶50∶42; 流速为0.5 mL/min; 光电二极管阵列检测器检测波长为UV-327 nm. 10种反应香精中均未检出该种物质, 回收率为78.9%～85.9%, 检出限为19.2 ng/mL.     

2-甲基-4-羟基-6-苯基嘧啶和2-甲基-4-羟基-5-溴-6-苯基嘧啶的高效液相色谱法分离测定

采用ODS-C18色谱柱和紫外检测器,对2-甲基-4-羟基-6-苯基嘧啶和2-甲基-4-羟基-5-溴-6-苯基嘧啶的含量进行HPLC分离测定.以甲醇水=4555为流动相,紫外检测波长为237 nm,样品线性范围为0.001～0.1 mg/mL.2-甲基-4-羟基-6-苯基嘧啶的RSD为0.5%;2-甲基-4-羟基-5-溴-6-苯基嘧啶的RSD为1.0%.     

N-(4-氯-3-三氟甲基苯基)-N′-(对取代苯基)脲的合成

以4-氯-3-三氟甲基苯胺、固体光气、对取代苯胺为原料,采用一锅法合成了N-(4-氯-3-三氟甲基苯基)-N-′(对甲基苯基)脲和N-(4-氯-3-三氟甲基苯基)-N-′(对溴苯基)脲,其结构经1H NMR,IR和元素分析表征。     

1，4-双{2-[4-[2-苯并恶唑)苯基]乙烯基}苯及衍生物的合成

通过Wittig-Horner反应，以对苯二甲醛和2—(4-氯甲基苯基)苯并恶唑为主要 原料，合成了八个新型1，4-双{2-[4-(2—苯并恶唑)苯基]乙烯基}苯及衍生物．通 过IR，^1H NMR,UV-vis和元素分析等方法确认了它们的化学结构，分析数据表明各 标题化合物分子结构中的C=C双键均为反式结构特．     

不对称催化合成2-[[3-{[3-氯-5-(三氟甲基)吡啶-2-基]-氧基}苯氧基](苯基)甲基]丙烯酸甲酯

以苯甲醛、丙烯酸甲酯、2,3-二氯-5-三氟甲基吡啶和间苯二酚为原料,分别合成了MBH乙酸酯（6）和取代苯酚（9）;在(DHQD)₂PHAL催化下,6和9经不对称反应立体选择性合成了2-【【3-{[3-氯-5-(三氟甲基)吡啶-2-基]-氧基}苯氧基】(苯基)甲基】丙烯酸甲酯,产率50%, ee 94%,其结构经¹H NMR, ¹³C NMR和HR-MS确证。     

氟环唑外消旋体在纤维素-三(3,5-二甲基苯基氨基甲酸酯)手性固定相上的高效液相色谱法拆分

在纤维素-三(3,5-二甲基苯基氨基甲酸酯)（CDMPC）手性固定相上,分别采用正相、反相及极性有机相色谱模式对氟环唑外消旋体进行了拆分,并考察了流动相组成在手性识别中对手性分离的影响。氟环唑在Chiralcel OD-H手性色谱柱（填充CDMPC手性固定相）上采用反相色谱模式,以甲醇-水(体积比为80∶20)为流动相,获得了最佳的拆分,其两对对映异构体的分离度Rs分别为1.64和6.50。     

1-[2′,4′-二氟-(1,1′-联苯)-4-基苯基甲基]-咪唑的合成

以2,4-二氟联苯为起始原料,经酰化反应制得2′,4′-二氟-(1,1′-联苯)-4-基苯基甲酮(2);2经NaBH4还原得2′,4′-二氟-(1,1′-联苯)-4-基苯基甲醇(3);3经氯代得2′,4′-二氟-(1,1′-联苯)-4-基苯基氯甲烷(4);4与咪唑发生亲核取代反应合成了1-[2′,4′-二氟-(1,1′-联苯)-4-基苯基甲基]-咪唑(5). 2～5为新化合物,其结构经1H NMR, IR, MS和元素分析确证.     

高效液相色谱法手性拆分(2-戊基-3-苯基-2,3环氧丙烷基)二苯基磷酸酯对映体

采用多糖类手性色谱柱,建立了(2-戊基-3-苯基-2,3环氧丙烷基)二苯基磷酸酯对映体的高效液相色谱手性拆分方法。考察了手性柱类型、流动相组成、流速、柱温等对手性拆分的影响,并对分离机制进行了探讨。结果表明,采用Chiralpak AS-H柱(250×4.6mm,i.d.,5μm),以正己烷-异丙醇(85∶15,V/V)为流动相,在柱温25℃,流速1.0mL/min,检测波长210nm的条件下,(2-戊基-3-苯基-2,3环氧丙烷基)二苯基磷酸酯对映体能达到完全分离,且稳定性和重复性好。该方法也适用于(2-戊基-3-苯基-2,3环氧丙烷基)二苯基磷酸酯类似物的手性拆分。     

气相色谱法测定磷酸三甲苯酯异构体含量

建立测定磷酸三甲苯酯临、间、对位异构体含量的气相色谱方法。通过优化色谱分析条件,如降低初始柱箱温度和程序升温速度,可较好分离开TCP的10种同分异构体。选用弱极性的AB–5MS色谱柱,设置柱箱初始温度为120℃,升温速度为3℃/min,终温为300℃。使用相应的纯物质,对其中的临-临-临,间-间-间,对-对-对进行了定量分析。三种异构体在各自的线性范围内均呈良好的线性,线性相关系数大于0.999,检出限为0.162 7~0.168 8 mg/L,测定结果的相对标准偏差小于5%(n=6)。该方法检出限低,重现性好,适合于磷酸三甲苯酯异构体含量的检测。     

Determination of the isomeric distribution and associated impurities in commercial diethylbenzenes by capillary gas chromatography

A capillary gas chromatographic method for the quantitative analysis of diethylbenzene fractions is described. Estimation of ortho-, meta- and para-isomers and other C₉ and C₁₀ aromatic impurities is covered. The conditions developed involve the use of a capillary column of Carbowax-1540 (300 feet × 0.01 inch) under isothermal operation. The retention index data for a number of aromatics are presented at four temperatures (90, 100, 110 and 120°C). The method offers a good choice for any level of concentration both for isomers and impurities commonly encountered within a reasonable analysis time.     

A theoretical study of the structures, energetics, stabilities, reactivities, and out-of-plane distortive tendencies of skeletally substituted benzenes (CH)(5)XH and (CH)(4)(XH)(2) (X = B(-), N(+), Al(-), Si, P(+), Ga(-), Ge, and As(+)).

Ab initio molecular orbital theory at Hartree-Fock (HF), post-Hartree-Fock (MP2 and CCSD(T)), and the hybrid density functional theory (B3LYP) calculations were done on the mono-(CH)(5)XH and diskeletally substituted (CH)(4)(XH)(2) benzenes (X = B(-), N(+), Al(-), Si, P(+), Ga(-), Ge, and As(+)). The computed relative energies of the disubstituted isomers show interesting trends. While the ortho-isomer is the most stable for X = Ga(-), Ge, and As(+), meta was found to be the most stable for X = B(-), N(+), Al(-) and Si, and para was found to be the most stable for X = P(+). Various intricate factors that govern the relative stabilities, such as the sum of bond strengths in the twin Kekule forms, rule of topological charge stabilization (TCS), and electrostatic repulsion were critically examined. The sum of bond strengths in the twin Kekule forms was proved to be quite a successful measure in predicting the relative stability orders between ortho- and meta-/para-isomers. The rule of TCS breaks down especially in the presence of overwhelming factors such as the differences in the cumulative bond strengths of the two positional isomers; however, the stability ordering between the para- and meta-isomers is successfully predicted in most cases. The tendency for ring puckering increases a great deal especially when the substituents are from 3rd or 4th row. Extension of the popular inverse relationship between the thermodynamic stability and reactivity was found to be inapplicable for this class of compounds. The computed singlet-triplet energy differences and the chemical hardness (eta) values indicate that the skeletal substitution weakens the pi-strength of the benzenoid system and increases their reactivity.     

Substituent positional variations and the lithographic properties of poly(methylstyrene-CO-chloromethylstyrene) resist systems

The lithographic performances of structurally different copolymers of methylstyrene (ortho-, meta- and para-isomers) and chloromethylstyrene (meta- and para-isomers) have been assessed. Linear correlations of the data, based on Charlesby's theory of radiation-induced crosslinking of polymers, demonstrate that sensitivity and contrast are functionally related for this system. Variation of the structure of the chloromethylstyrene component of the copolymers had little effect on the lithographic parameters, but the effect of structural variation of the methylstyrene component was pronounced, the order of increasing sensitivity being ortho < meta < para.     

Separation of Hydroxybenzoic Acid Isomers by Capillary Zone Electrophoresis

Abstract

Capillary zone electrophoresis is a highly efficient analytical technique that has been shown to be particularly useful for the analysis of isomers. Using a cathodic injection and anodic detection scheme, ortho-, meta- and para-hydroxybenzoic acids were separated in a fused-silica capillary column with a phosphate buffer at pH 10.3 (25.0 mmol/1 phosphate + 0.20 mmol/1 cetyltrimethylammonium bromide (CTAB) + 10% (v/v) 1-propanol with an applied voltage of 10 KV followed by direct UV detection. The use of CTAB as electroosmotic flow modifier allows the rapid separation of the three isomers by reversing the direction of electro-osmotic flow. The influence of pH, CTAB concentration and organic solvents on the migration behaviour of the solutes were also studied.     

Effect of configuration and conformation on the spin multiplicity in xylylene type biradicals

The singlet-triplet splitting energy gap ΔEs-T= Es - ET is calculated for the ortho-, meta-, and para-xylylenes and their heteroatomic analogous by means of AM1-CI approach. It is shownthat when the radical centers R(R=H2C- ,H2N - or HN'- ) are twisted sufficiently far out ofconjugation with the benzene ring, ΔEs-T tends to zero or is negative, i.e. ortho-, meta-, and para-phenylenes turn into weak ferromagnetic or antiferromagnetic coupling unit, while they are strong ferromagnetic (meta-isomers) or antiferromagnetic (ortho-, para-isomers) coupling units under planar conformation. It is suggested that serious twisted conformation is not recommended candidate for the design of novel high-spin molecules with stable high-spin ground states by ortho-or para-phenylene coupling unit.     

Photosensitization by iodinated DNA minor groove binding ligands: Evaluation of DNA double-strand break induction and repair

Iodinated DNA minor groove binding bibenzimidazoles represent a unique class of UVA photosensitizer and their extreme photopotency has been previously characterized. Earlier studies have included a comparison of three isomers, referred to as ortho-, meta- and para-iodoHoechst, which differ only in the location of the iodine substituent in the phenyl ring of the bibenzimidazole. DNA breakage and clonogenic survival studies in human erythroleukemic K562 cells have highlighted the higher photo-efficiency of the ortho-isomer (subsequently designated UV(A)Sens) compared to the meta- and para-isomers. In this study, the aim was to compare the induction and repair of DNA double-strand breaks induced by the three isomers in K562 cells. Further, we examined the effects of the prototypical broad-spectrum histone deacetylase inhibitor, Trichostatin A, on ortho-iodoHoechst/UVA-induced double-strand breaks in K562 cells. Using γH2AX as a molecular marker of the DNA lesions, our findings indicate a disparity in the induction and particularly, in the repair kinetics of double-strand breaks for the three isomers. The accumulation of γH2AX foci induced by the meta- and para-isomers returned to background levels within 24 and 48 h, respectively; the number of γH2AX foci induced by ortho-iodoHoechst remained elevated even after incubation for 96 h post-irradiation. These findings provide further evidence that the extreme photopotency of ortho-iodoHoechst is due to not only to the high quantum yield of dehalogenation, but also to the severity of the DNA lesions which are not readily repaired. Finally, our findings which indicate that Trichostatin A has a remarkable potentiating effect on ortho-iodoHoechst/UVA-induced DNA lesions are encouraging, particularly in the context of cutaneous T-cell lymphoma, for which a histone deacetylase inhibitor is already approved for therapy. This finding prompts further evaluation of the potential of combination therapies.     

DNA targeted UVA photosensitization: characterization of an extremely photopotent iodinated minor groove binding DNA ligand

Previous studies have described UVA-induced DNA strand breakage at the binding sites of iodinated DNA minor groove binding bisbenzimidazoles. The DNA breakage, presumably mediated by the carbon-centred ligand radical produced by photodehalogenation, was also shown to be cytotoxic. The earlier studies included a comparison of three ligand isomers, designated ortho-, meta- and para-iodoHoechst, and the efficiency of photo-induction of strand breaks in plasmid DNA proved to be much higher for the ortho-isomer. We have now extended the comparison of the three isomers with respect to photo-induced cytotoxicity in K562 cells. Although the relationship between the extent of nuclear uptake and the concentration of the ligand in the medium was similar for the three isomers, assay of in situ dehalogenation in drug-treated cells indicated that the apparent cross-section for dehalogenation of the ortho-isomer was greater than 5-fold higher than that for the meta- and para-isomers. Also, analysis of clonogenic survival data showed that the dehalogenation event associated with ortho-iodoHoechst was a more efficient mediator of UVA-induced cytotoxicity in K562 cells than that for meta- or para-iodoHoechst. The number of dehalogenation events associated with 50% cell-kill for ortho-iodoHoechst (1.23+/-0.04 x 10(4)) was less than that for the para- (3.92+/-0.29 x 10(4)) and meta- (11.6+/-0.90 x 10(4)) isomers. Thus it is concluded that the photopotency of ortho-iodoHoechst, which is an important feature in the context of its potential use in clinical phototherapy, is due not only to more efficient UVA-mediated dehalogenation of the ligand, but also to greater cytotoxic potency per dehalogenation event.     

Separating Xylene Isomers with a Calcium Metal-Organic Framework

The purification of p-xylene (pX) from its xylene isomers represents a challenging but important industrial process. Herein, we report the efficient separation of pX from its ortho- and meta- isomers by a microporous calcium-based metal–organic framework material (HIAM-203) with a flexible skeleton. At 30 °C, all three isomers are accommodated but the adsorption kinetics of o-xylene (oX) and m-xylene (mX) are substantially slower than that of pX, and at an elevated temperature of 120 °C, oX and mX are fully excluded while pX can be adsorbed. Multicomponent column breakthrough measurements and vapor-phase/liquid-phase adsorption experiments have demonstrated the capability of HIAM-203 for efficient separation of xylene isomers. Ab initio calculations have provided useful information for understanding the adsorption mechanism.     

反相高效液相色谱法测定1-(对偶氮苯)-3-(5-氯-2-吡啶)-三氮烯

采用ZORBAX Ec lipse XDB-C8(4.6 mm i.d.×150 mm,5μm)色谱柱,乙腈流动相,流速0.70 mL.m in-1,检测波长407 nm,建立了测定1-(对偶氮苯)-3-(5-氯-2-吡啶)-三氮烯的反相高效液相色谱法.该方法线性范围0.5-8.0 mg.L-1,相对标准偏差为2.5%(c=5.0 mg.L-1,n=5),回收率在95.7%-105%之间.