新型层状铈材料的水热合成和表征

利用水热晶化法在弱酸性条件下首次成功地将有机模板剂引入稀土材料的结构内,合成出新型层状[Ce(PO4)(HSO4)(H2O)]0.5[enH2]单晶.系统地研究了该化合物的合成规律,并通过粉末X射线衍射、红外光谱、差热-热重、顺磁共振、磁性质测定、ICP等离子发射光谱及CHN元素分析等手段对产物进行了表征.同时解析了晶体结构.该化合物的独特层结构由九配位的铈中心多面体及SO4,PO4四面体相互连接而构成.质子化的有机模板剂乙二胺离子位于无机层间平衡骨架负电荷.     

层状α-氢型磷酸氢锆混合二氧化硅的交流电导

1 引言无定形和多晶粉末层状α-水合磷酸氢锆是一种固体质子电解质.多晶粉末层状α-水合磷酸氢锆的电导率随结晶度的提高而明显降低,但是其电导表观活化能相同而和结晶度无关.电导主要是由质子沿着微晶的水合表面迁移所致.因此,增大水合表面有可能提高多晶粉末层状α-磷酸氢锆的电导率.α-磷酸氢锆的层状结构由层间的磷氧基形成氢键     

一些晶态层状有机-无机混合磷酸锆的制备、表征和层间距分析

酸氢锆和有机磷酸锆是一类具有层状结构的多功能材料 ,具有较高的热稳定性和较好的耐酸碱性能 ,可用作离子交换剂、催化剂及催化剂载体、吸附剂和色谱填充剂等 [1,2]。典型的α-磷酸氢锆具有数十至数百 m2· g-1的比表面 [3]。且无论是晶态、半晶态或是非晶态 ,所有有机基团均位于其表面或层间面上 ,这一优点可以充分发挥活性基团的配位作用。利用有机合成化学的丰富多样性 ,合成含有不同种类有机活性基团的有机膦酸 ,从而将不同种类的有机活性基团引入有机-无机混合磷酸锆层状结构材料 [4～ 6]。这些膦酸盐的另一优点是有机基团的含量比是…     

用计算模拟方法研究Al_3P_4O_(16)~(3-)计量比的二维层状磷酸铝中的有机胺模板能力

将快速 Monte Carlo方法与分子动力学方法相结合 ,研究了不同种类有机分子在 Al3P4 O3- 1 6 计量比的二维层状磷酸铝形成中的模板能力 .依据主 -客体之间非键相互作用能 (包括范德华能、氢键能和库仑能 ) ,可合理地解释已知实验现象 ,并能有效地预测出适于形成某一特定无机层结构的有机胺模板剂 .通过选择理论预测的有机胺分子作为模板剂 ,成功地合成了二维层状磷酸铝化合物 Al3P4 O1 6 · 1 .5 H3NC6 H1 0 NH3.     

用计算模拟方法研究Al3P4O3-16计量比的二维层状磷酸铝中的有机胺模板能力

将快速Monte Carlo方法与分子动力学方法相结合, 研究了不同种类有机分子在Al3P4O3-16计量比的二维层状磷酸铝形成中的模板能力. 依据主-客体之间非键相互作用能(包括范德华能、氢键能和库仑能), 可合理地解释已知实验现象, 并能有效地预测出适于形成某一特定无机层结构的有机胺模板剂. 通过选择理论预测的有机胺分子作为模板剂, 成功地合成了二维层状磷酸铝化合物Al3P4O16*1.5H3NC6H10NH3.     

新型层状磷酸铝[Al6P8O32][(C2H5)2NHCH2CH2NH3]2·[C2H5NH2CH2CH2NH2C2H5] 的合成、表征及其共模板作用

在溶剂热体系中,以N,N-二乙基乙二胺为结构导向剂,合成了Al/P为3/4的层状磷酸铝[Al6P8O32][(C2H5)2NHCH2CH2NH3]2·[C2H5NH2CH2CH2NH2C2H5]单晶,并通过X射线单晶衍射结构分析.XRD,ICP,元素分析,差热-热重分析等手段进行了表征.该化合物属单斜晶系,P2(1)/c空间群,晶胞参数:a=0.90945(2)nm,b=1.46424(4)nm,c=1.87572(5)nm,β=102.672(2)°,Z=4.其阴离子层由AlO4四面体和PO3(=O)四面体单元交替连接构成,形成四、六、八元环拓扑结构,无机层以ABAB方式堆积,两种质子化的有机胺分子N,N-二乙基乙二胺及其重排产物N,N′-二乙基乙二胺填充在层间.用分子动力学模拟方法,考察了标题化合物中有机胺与无机层间的相互作用,讨论了这两种有机胺的共模板作用.     

微孔磷酸铝AIPO4-HDA的热分解过程研究

采用差热-热重-质谱(TG-DTA-MS)、粉末X射线衍射(XRD)、红外光谱(FTIR)和固体核磁(Solid-State-MAS-NMR)等技术详细地研究了微孔磷酸铝晶体AlPO4-HDA中模板剂的热分解过程.结果表明,该模板剂的热分解分3步进行:第一步是模板剂和无机骨架之间的部分氢键断裂;第二步为模板剂的Hof-mann降解反应和β-消除反应;第三步是残留积碳的氧化分解反应.固体MASNMR的研究结果表明,随着模板剂的脱出.无机骨架中铝和磷的配位状态发生了变化.     

层状有机-无机杂化钙钛矿(C7H12N2)PbBr4的合成、结构及发光性质

通过向杂化体系中引入特殊的有机配体2-（2-氨基乙基）吡啶,利用溶液冷却技术,合成了一种二维层状有机-无机杂化钙钛矿结构材料的化合物(C7H12N2)PbBr4的晶体。 X射线单晶衍射结果表明,化合物(C7H12N2)PbBr4的单晶结构属于正交晶系,Pbca空间群,a=1.702 3 nm,b=0.828 9 nm,c=2.022 4 nm,Z=8。 无机部分是由共顶点的PbBr6金属卤化物八面体组成的二维平面片层。 采用了相对扭曲构型的有机胺阳离子与二维无机片层通过氢键作用组成了杂化钙钛矿结构。 对其光学性质进行了测试。荧光光谱的特征发射峰出现在422 nm处。     

层状(脯氨酸-N-甲基膦酸-磷酸氢)锆的合成及插层性能研究

以高结晶度制备了层状(脯氨酸-N-甲基膦酸-磷酸氢)锆(α-ZPMPP)晶体(层间距为1.52nm),并研究了其常温下对正丁胺的插层性能,用元素分析、IR、XRD和TG-DSC热分析对α-ZPMPP及其插层复合物进行了表征.结果表明,层状α-ZPMPP具有形成超分子主-客体化合物的插层性能,正丁胺客体分子在主体底物中形成单分子层,并插入α-ZPMPP中,使层间距增大0.45nm,插入的正丁胺可在150～250℃被脱除.     

自组装和共缩聚法制备磺酸基修饰的硅柱磷酸锆

以十六胺插层磷酸锆为原料, 利用十二烷基二甲基苄基氯化铵为导向模板剂, 通过正硅酸乙酯和巯丙基三甲氧基硅烷的层间共水解缩聚, 并结合双氧水对巯丙基的熏蒸氧化, 制备了磺酸基修饰的硅柱磷酸锆材料。通过XRD、SEM、N2吸附-脱附和FT-IR等方法对柱撑材料进行了结构表征。结果表明, 通过调变预撑剂和模板剂中的碳链长度可以优化材料的柱撑结构和孔结构, 磺酸基修饰的材料孔径分布在2.17 nm左右, 比表面积可达163 m²·g^-1, 且保留有规整有序的柱撑磷酸锆层板结构。磺酸基的修饰则成功调变了材料的酸位性质, Brönsted酸量最高可达2.71 mmol·g^-1, 总酸量可达5.20 mmol·g^-1。利用柠檬酸与正丁醇的酯化反应为探针反应, 由于磺酸基修饰的硅柱磷酸锆材料具有独特的空间反应效应和较为丰富的Brönsted酸位, 酯化反应转化率最高可达95.74%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.