强流低发射度光阴极微波电子枪的优化设计

为了实现高增益FEL,对其关键部件光阴极微波电子枪进行了优化设计,还就发射度补偿技术进行了较详细的考虑,并用PARMELA程序进行了粒子动力学的模拟,初步给出了为了降低初始电子束团横向发射度的的优化参数。     

光阴极微波电子枪优化设计的考虑

对光阴极微波电子枪进行了优化设计 ,给出了光阳极微波腔的形状、电参数和电场分布 .电子束团初始参数对束流横向发射度的影响 ,用 Parmela程序对其进行了优化 ,得到了一组最优参数 .考虑了补偿线圈对束流发射度的影响 ,对线圈的位置和电流的大小做了优化 .经过优化后得到腔出口处的横向发射度为 1 .39πmm.mrad,达到了设计时的要求. A 1.3 GHz photocathode RF gun is under study in peking University. The photocathode RF gun, composed of gun cavity, photocathode and Laser system, is expected to deliver a electron beam with a normalized transverse rms emittance of 1π mm·mrad at a charge of 1nC. Its performance has been studied by the space-charge tracking code PARMELA. The influences of the initialized electron beam were also studied. The emittance compensation technique is employed. After optimization of the parameters was...     

用于短波长FEL的光阴极微波电子枪设计研究

高增益、短波长自由电子激光器需要发射度低、峰值电流高的短脉冲电子束流.采用发射度补偿技术,设计了一台S波段、一个半腔体的光阴极微波电子枪以用于建议中的SDUV-FEL装置.POISSON,SUPERFISH和PARMELA程序的计算表明:当微脉冲电量为2nC时,这种设计能产生ε_n,rms=2.3π·mm·mrad、E_k=4.8MeV的电子束流.报道了该枪的设计考虑和模拟结果.     

光阴极电子枪中金属光阴极的热发射度研究

对光阴极电子注入器中金属光阴极的热发射度进行了理论研究.金属光阴极的热发射度由两部分构成.一方面对于理想平坦的阴极,光电子穿越表面势垒后有一定的残余动能,造成一定的热发射度,这部分前人已经做过一些理论研究.本文改进已有的模型,进一步给出了理想平坦光阴极的热发射度.另一方面,阴极表面的粗糙度将造成热发射度的增加,本文首次解析地分析了表面粗糙度对光阴极电子枪热发射度的影响,得到表面粗糙度造成的热发射度的估计公式.本文对金刚石车削后的铜、镁的表面形貌进行了测量,表明粗糙度造成的热发射度大约0.4mm·mrad.本文的热发射度理论能够较好的解释目前国际上铜、镁阴极的热发射度的测量结果.     

高亮度注入器电子枪研制

研制了自由电子激光高亮度注入器的高重复频率强流短脉冲电子枪，实测测电子枪脉冲流强５．８Ａ，脉冲半宽度２．２ｎｓ，脉冲重复频率２．１６ＭＨｚ。由于电子枪使用阴栅组件，阴栅极间距仅０．２ｍｍ，脉冲电压很低就可触发，因此电子枪具有很高的重复频率。     

低反轰热阴极微波电子枪初步实验

 简述了紧凑型自由电子激光太赫兹源研制的系统设计方案,介绍了具有两路微波馈入的热阴极微波电子枪的研制与测试情况,利用束流传感器测试了束流强度,并利用CCD相机测试了束斑大小,给出了微波电子枪通过初步热测实验得到的结果。测得微波电子枪出口处束流强度超过500 mA,束斑约3 mm,采用双屏法测量束流发射度,得到归一化发射度约为13.5 π·mm·mrad,测试指标与理论设计值吻合较好。     

热阴极微波电子枪的改进设计

北京自由电子激光目前所用热阴极微波电子枪输出的电子束,在经过加速管加速后,位于微波脉冲前沿的电子束团存在能量偏高的现象,使得这部分电子无法对FEL增益做贡献。根据实验数据,分析了造成该现象的原因,提出一种可行的改进措施,即通过降低微波谐振腔的品质因数缩短建场时间,来消除该现象,以便提高整个装置的输出性能。     

热阴极微波电子枪的改进设计

 北京自由电子激光目前所用热阴极微波电子枪输出的电子束，在经过加速管加速后，位于微波脉冲前沿的电子束团存在能量偏高的现象，使得这部分电子无法对FEL增益做贡献。根据实验数据，分析了造成该现象的原因，提出一种可行的改进措施，即通过降低微波谐振腔的品质因数缩短建场时间，来消除该现象，以便提高整个装置的输出性能。     

光阴极微波电子枪中发射度补偿及模拟计算

介绍了上海深紫外自由电子激光用光阴极微波电子枪采用发射度补偿技术的结果 .详细分析了线性空间电荷力的特点及对束流发射度的影响 ,从束流动力学和相空间两方面讨论了发射度补偿原理 .给出了补偿线圈的设计结构及其轴向场分布 .利用PARMELA程序对补偿效果作了模拟计算 .结果表明 ,设计的腔体对单圈 1 .5nC束团 ,在枪出口后 1 .2m处 ,电子能量为 5 .7MeV ,横向归一化发射度εn ,RMS=1 .61 2πmm·mrad. The emittance compensation technology will be used on the photo cathode RF gun for Shanghai SDUV FEL. In this paper, the space charge force and its effect on electron beam transverse emittance in RF gunis is studied, the principle of emittance compensation in phase space is discussed. We have designed a compensation solenoid and calulated its magnetic field distribution. Its performance has been studied by the code PARMELA. A simulation result indicates that the normalized transverse RMS emi...     

二次发射微波电子枪的倍增特性

 利用3DRun程序通过数值模拟计算，对二次发射微波电子枪的束流倍增特性作了研究。用1维模型计算了束流倍增与腔两极间距离以及腔中场强的关系，并详细给出了腔两极间距离为10mm,场强为5-4MV/m时出射电子纵向聚束及能量聚焦过程；利用3DRun程序研究了在高频场及粒子束本身空间电荷场的共同作用下，束流在3维运动过程中的倍增特性，计算了出射束流的发射度。通过计算表明：二次发射微波电子枪可以提供低发射度、高流强的电子束。     

光阴极微波电子枪中时间抖动对粒子动力学的影响

对光阴极微波电子枪粒子束性能起决定性影响的因素之一就是激光脉冲相对加速微波相位的时间抖动. 对这种时间抖动的测量和反馈控制进行了理论和实验分析, 并对时间抖动对束流品质的影响进行了模拟研究, 得到了利用锁相环回路降低激光脉冲相位噪声的实验经验, 为光阴极微波电子枪中激光与微波相位同步问题提出了解决方法.     

Emittance measurement & optimization for the photocathode RF gun with laser profile shaping

The Laser Undulator Compact X-ray source （LUCX） is a test bench for a compact high brightness X-ray generator, based on inverse Compton Scattering at KEK, which requires high intensity multi-bunch trains with low transverse emittance. A photocathode RF gun with emittance compensation solenoid is used as an electron source. Much endeavor has been made to increase the beam intensity in the multi-bunch trains. The cavity of the RF gun is tuned into an unbalanced field in order to reduce space charge effects, so that the field gradient on the cathode surface is relatively higher when the forward RF power into gun cavity is not high enough. A laser profile shaper is employed to convert the driving laser profile from Gaussian into uniform. In this research we seek to find the optimized operational conditions for the decrease of the transverse emittance. With the uniform driving laser and the unbalanced RF gun, the RMS transverse emittance of a 1 nC bunch has been improved effectively from 5.46 πmm·mrad to 3.66 πmm·mrad.     

Emittance measurement & optimization for the photocathode RF gun with laser profile shaping

The Laser Undulator Compact X-ray source(LUCX) is a test bench for a compact high brightness X-ray generator,based on inverse Compton Scattering at KEK,which requires high intensity multi-bunch trains with low transverse emittance.A photocathode RF gun with emittance compensation solenoid is used as an electron source.Much endeavor has been made to increase the beam intensity in the multi-bunch trains.The cavity of the RF gun is tuned into an unbalanced field in order to reduce space charge effects,so that the field gradient on the cathode surface is relatively higher when the forward RF power into gun cavity is not high enough.A laser profile shaper is employed to convert the driving laser profile from Gaussian into uniform.In this research we seek to find the optimized operational conditions for the decrease of the transverse emittance.With the uniform driving laser and the unbalanced RF gun,the RMS transverse emittance of a 1 nC bunch has been improved effectively from 5.46 πmm.mrad to 3.66 πmm.mrad.     

Design study of a L-band photocathode RF injector

In the proposal of the Beijing Advanced Light Source, a compact combination of XERL and XFEL using a common SC linac is being considered. In the meantime, an ERL-FEL test facility is being proposed and will be used for THz radiation. In this test facility, a L-band photocathode RF injector is needed. In this paper, we give the physical design of the L-band photocathode RF injector for the test facility.     

1.6Cell光阴极微波电子枪冷测及初步高功率实验研究

介绍了清华大学加速器实验室BNL/KEK/SHI型1.6cell微波枪调谐以及老练的初步结果. 调谐过程中, 测量了耦合孔尺寸与外部品质因数之间的关系; 给出了0模和π模的频率、单腔频率以及场分布. 目前, 该微波电子枪正在进行高功率微波老练, 给出了该枪初步的微波老练的情况及测量结果.     

Emittance measurement & optimization for the photocathode RF gun with laser profile shaping

The Laser Undulator Compact X-ray source(LUCX) is a test bench for a compact high brightness X-ray generator,based on inverse Compton Scattering at KEK,which requires high intensity multi-bunch trains with low transverse emittance.A photocathode RF gun with emittance compensation solenoid is used as an electron source.Much endeavor has been made to increase the beam intensity in the multi-bunch trains.The cavity of the RF gun is tuned into an unbalanced field in order to reduce space charge effects,so that ...     

Design study of a L-band photocathode RF injector

In the proposal of the Beijing Advanced Light Source, a compact combination of XERL and XFEL using a common SC linac is being considered. In the meantime, an ERL-FEL test facility is being proposed and will be used for THz radiation. In this test facility, a L-band photocathode RF injector is needed. In this paper, we give the physical design of the L-band photocathode RF injector for the test facility.     

合肥软X射线波段自由电子激光注入器模拟优化

合肥软X射线波段自由电子激光项目是基于直线加速器的软X射线光源. 其注入器由光阴极微波电子枪与两个直线加速3米段构成. 光阴极微波电子枪产生束团电荷量1nc、峰值流强100A、重复频率10Hz电子束流, 并利用螺线管磁场在其出口处进行发射度补偿, 在经过一段漂移距离后电子束流进入增强直线段加速. 使在低能端由于空间电荷效应产生的横向发射度增长基本被完全补偿. 本文中利用PARMELA对注入器进行了模拟计算, 对发射度的补偿效果进行了优化, 同时对注入器内各元件的布置也进行了优化. 在注入器出口可以得到归一化横向发射度小于1.5mm.mrad的低发射度束流.