首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 74 毫秒
1.


基于笔者最近建立的孕震断层多锁固段脆性破裂理论,本文针对大同—阳高—张北地区未来大地震发生的可能性进行了预测分析,结果表明该地区有可能发生65级以上的破坏性地震。
  相似文献   

2.

针对目前锚索抗滑桩的内力计算通常未考虑滑面以上桩身与岩土体的相互作用关系,而将滑面以上桩身按一般静力结构或有限次超静定结构计算的现状。本文根据弹性地基梁理论,考虑锚索与桩的变形协调,将初参数法运用到锚索抗滑桩的计算中,通过选取合理的初参数作为未知量,得到了锚索拉力以及桩身内力的计算过程。并结合皖南地区某处产生滑移弯曲变形的顺层滑坡治理工程进行了分析,与传统方法计算结果相比,本方法所得内力值较大,偏于安全,桩身内力分布规律与传统方法所得结果较吻合。

)  相似文献   

3.
郑光  杜宇本  许强 《力学学报》2010,18(4):521-528
岩体中结构面的展布及其组合特征决定了岩体的工程地质性质和力学性状,影响着岩体的破坏方式。大瑞铁路澜沧江大桥所处的澜沧江构造带,具有高地震烈度、活跃的新构造运动、活跃的外动力地质条件、活跃的岸坡浅表改造过程等地质特征。工程区两岸节理裂隙等弱面发育,岸坡浅表改造过程强烈,导致岩体结构复杂。通过野外现场调查,对两岸边坡岩体结构面数据进行统计分析,采用x2检验与K-S检验法对结构面进行概率密度拟合,分析岩体结构特征。结果表明:(1)右岸的优势结构面有三组; (2)左岸的优势结构面有四组; (3)各组优势结构面产出状态数据均服从正态分布。在统计分析结果的基础上,建立两岸岩体结构的统计模型,并对边坡破坏模式进行定性分析,认为:(1)右岸边坡变形破坏模式为滑移 压致拉裂; (2)左岸结构面贯通性不好,主要的破坏模式是局部块体滑移。
  相似文献   

4.


岩石在蠕变的过程中其基本力学参数变形模量E、内聚力c和内摩擦角是随时间和应力逐渐弱化的。本文对现行蠕变设备特点进行分析,研制了一套新型的五联单轴蠕变仪,此仪器能够在相同的应力条件下同时进行5个试件的蠕变试验。并且使用该仪器对宝鸡市秦源煤矿泥岩的力学参数E、c、在蠕变试验中的弱化规律进行了研究。提出了把粘塑性应变作为泥岩力学参数弱化的指标,得出了泥岩E、c、随粘塑性应变呈指数衰减的函数关系,并计算了该泥岩破坏时的E、c、。对该泥岩E、c、和粘塑性应变的函数关系式进行了分析,得到了岩石E、c、和应力(σ)以及时间(t)的耦合函数方程,为后续岩石非定常本构模型的研究奠定了基础。
力学参数〓时效性〓蠕变仪〓蠕变试验          


  相似文献   

5.
为研究微损伤对非均匀材料宏观破坏的影响,建立了非均匀材料的三维微单元强度分布模型,在平均场模型和集团分担模型的基础上,根据模拟计算结果建立了邻近单元加权分担模型;采用细观统计的方法建立了微观损伤造成宏观破坏的概率函数及跨尺度敏感性函数.结果表明:材料的损伤分数和名义应力越大,破坏集团之间的距离越近,宏观破坏概率就越大;...  相似文献   

6.
为了研究不同应力状态和应变率条件下镁合金MB2的拉伸破坏行为,利用材料试验机和分离式Hopkinson拉杆(SHTB),对镁合金MB2的光滑及缺口圆柱试件进行了动静态拉伸加载;拟合得到了镁合金MB2的动静态拉伸本构关系,建立了其修正的Johnson-Cook失效破坏准则,并对不同试件的拉伸破坏行为进行了数值模拟;利用SEM对宏观破坏模式对应的微观损伤机理进行了分析。结果表明,随着应力三轴度的增加,镁合金MB2的等效破坏应变先增大后减小,宏观破坏模式由剪切转为正拉断,微观损伤机制由混合断裂转变为韧窝断裂;而随着应变率的增加,等效破坏应变不断减小,破坏模式不发生改变。Johnson-Cook本构关系和修正后的Johnson-Cook失效破坏准则能较好地拟合动态静态拉伸实验结果并预测不同试件的杯锥形破坏特征。  相似文献   

7.


中国 俄罗斯原油管道工程(简称中俄原油管道)规划全长1〖CS%0,0,0,0〗〖CS〗035 km,中国境内段965 km,俄罗斯境内段70 km。中俄原油管道(漠河—大庆段)穿越约500 km多年冻土区,沿途地形起伏,水系和沼泽发育,冻土工程地质条件复杂,影响因素多样。提出以管道地基土的最大融沉变形量为评价准则,以多年冻土的年平均地温和含冰量为评价指标,对多年冻土进行工程分类,并依据分类结果进行评价。依据计算结果以-10℃和-20℃对中俄原油管道沿线多年冻土进行冻土工程分类。具体分为:稳定型、过渡型、高温不稳定型(-10~-20℃)以及极高温极不稳定型(≥-10℃)。分别对应良好、较好、不良以及极差评价结果,并以此为基准选择传统埋设、埋设、埋设+换填、埋设+换填+隔热或架设等管基设计原则。对管道沿线约430 km多年冻土区进行了详细和逐段的评价。评价结果表明评价指标简单、实用,评价结果合理、恰当,可推荐在其它多年冻土区类似管道工程中使用。

P642
A
2009-11-04
2010-01-26  相似文献   

8.
贵州石漠化地区棕黄色粘性土团聚体稳定性研究   总被引:1,自引:0,他引:1  
   以贵州省普定县碳酸盐岩石漠化研究试验区(陈旗村)的棕黄色粘性土为研究对象,考虑了初始含水率和浸润时间两个影响因素,对研究区土体中占绝对优势的>5mm的大颗粒团聚体进行了共计16组湿筛法试验。结果表明:棕黄色粘性土团聚体遇水破裂的过程主要发生在被浸润初期,初始含水率越小的土壤,经雨水浸润后,大颗粒团聚体破裂得越快越彻底;而原本就比较湿润的土体,团聚体的稳定性则较好。因此,对碳酸盐岩石地区石漠化的防治,应着重考虑气候长期干燥、蒸发量对水土流失的影响。


  相似文献   

9.
实际工程结构中混凝土材料大多处于双轴或三轴的复杂应力状态,已有的细观力学数值研究工作大多针对单轴加载问题,对于双轴或者三轴加载条件下混凝土破坏模拟的研究相对较少。复杂受力条件下的混凝土材料破坏模拟中,细观组分强度准则选取的合理与否将成为混凝土破坏模式及宏观力学性能数值研究准确和成功与否的关键。本文旨在探讨单轴强度准则,如最大拉应变准则在多轴加载条件下混凝土破坏过程研究中运用的合理性。鉴于此,首先在细观尺度上建立了混凝土试件的二维随机骨料模型,分别采用弹性损伤本构关系模型及塑性损伤本构关系模型来描述细观组分(即砂浆基质)的力学性能,对双轴加载条件下混凝土的细观破坏过程进行数值模拟,对比了单轴强度准则和多轴强度准则下混凝土试件破坏路径及宏观应力-应变关系的差异。数值结果表明,简单的单轴强度准则难以反映双轴加载下混凝土内部应力状态的复杂性,不宜采用单轴强度准则来描述多轴加载下混凝土的破坏行为。  相似文献   

10.

锦屏一级水电站泄洪洞位于雅砻江右岸埋深大于100m的大理岩中,构造条件复杂,确定隧洞开挖面是否可能产生关键块体对工程安全具有重要意义。本文在对泄洪洞中导洞地质调查和研究基础上,将随机概率模型引入关键块体理论,分析关键块体的生成概率、体积大小与安全系数,得出关键块体形成概率服从负指数分布,主要取决于J②、J④组裂隙迹长的分布情况; 关键块体的体积与主要结构面迹长成正比,最终收敛于结构面对关键块体完全切割时的关键块体体积; 关键块体的安全系数随主要结构面迹长的增加而降低,但是同样收敛于结构面对关键块体的完全切割情况。为设计有效的加固方案提供了依据,具有积极的工程应用价值。  相似文献   

11.
The present two-part study aims at investigating the specific effects of Mohr–Coulomb matrix on the strength of ductile porous materials by using a kinematic limit analysis approach. While in the Part II, static and kinematic bounds are numerically derived and used for validation purpose, the present Part I focuses on the theoretical formulation of a macroscopic strength criterion for porous Mohr–Coulomb materials. To this end, we consider a hollow sphere model with a rigid perfectly plastic Mohr–Coulomb matrix, subjected to axisymmetric uniform strain rate boundary conditions. Taking advantage of an appropriate family of three-parameter trial velocity fields accounting for the specific plastic deformation mechanisms of the Mohr–Coulomb matrix, we then provide a solution of the constrained minimization problem required for the determination of the macroscopic dissipation function. The macroscopic strength criterion is then obtained by means of the Lagrangian method combined with Karush–Kuhn–Tucker conditions. After a careful analysis and discussion of the plastic admissibility condition associated to the Mohr–Coulomb criterion, the above procedure leads to a parametric closed-form expression of the macroscopic strength criterion. The latter explicitly shows a dependence on the three stress invariants. In the special case of a friction angle equal to zero, the established criterion reduced to recently available results for porous Tresca materials. Finally, both effects of matrix friction angle and porosity are briefly illustrated and, for completeness, the macroscopic plastic flow rule and the voids evolution law are fully furnished.  相似文献   

12.
Two distinct implementations of the Mohr–Coulomb failure model are used in conjunction with a non-associated quadratic plasticity model to describe the onset of fracture in low carbon steel sheets. The stress-based version corresponds to the original Mohr–Coulomb model in stress space. For the mixed stress/strain-based version, the Mohr–Coulomb failure criterion is first transformed into the space of stress triaxiality, Lode angle parameter and equivalent plastic strain and then used as stress-state dependent weighting function in a damage indicator model. Basic fracture experiments including tensile specimens of different notch radii and a punch test are performed to calibrate the material parameters of the respective models. Subsequently, the models are used to predict the crack initiation in a Hasek test and during the stamping of an anticlastic structure. Unlike for the calibration experiments, the loading history during stamping is highly non-linear. Both models can be calibrated with similar accuracy, but the strain-based model predicts the instant of onset of fracture with greater accuracy in the stamping experiment which is an advantage of the empirical damage accumulation rule.  相似文献   

13.
Microcracks have great significance for shear strength of brittle rock in compression. A major challenge of this area is to establish the correlation of microcracks and macroscopic shear strength. A new micro–macro method is presented to predict the shear strength of brittle rock in compression. This method incorporates the microcrack model suggested by Ashby, Mohr–Coulomb failure criterion and a crack-strain relation. This crack–strain relation is presented to link the crack growth and axial strain by combining the micro and macro definitions from rock damage. The shear strength and stress–strain relationship of Jinping marble are theoretically investigated in detail. The rationality of this suggested method is verified by using the experimental results founded on Jinping marble. Effects of the initial microcrack size, friction coefficient and confining pressure on internal friction angle, cohesion, and shear strength are also discussed.  相似文献   

14.
复杂应力条件下脆性材料的受拉破坏准则   总被引:1,自引:1,他引:0  
根据脆性材料微粒对之间距离超过特定距离而破坏的微观机理,结合宏细观试验结果指出的绝大多数的破坏颗粒对的方向与σ1的方向之间的夹角都大于0°这一事实,导出了新的脆性材料张破坏准则: σ1 ασ2 βσ3≤[σ],式中系数β与材料的优势角θ(破坏颗粒对的方向与σ1的方向之间的夹角的某种平均) 和泊松比μ有关.同时还指出了经典强度理论由于没有考虑优势角从而导致了它们与宏观实验结果不符.实验结果表明,在张破坏条件下此准则比经典的准则有更高的精度.  相似文献   

15.
采用GIS与数值模拟相结合的方法对三峡水库库首区诱发地震危险性进行评价。通过研究水库诱发地震的影响因素,建立模型进行数值模拟。在GIS平台上,综合数值模拟结果与诱发地震监测结果,建立危险性评价数据库。在GIS支持下,采用最大拉应变准则判别拉伸破坏,采用摩尔-库仑准则判别剪切破坏,对单元进行评价。利用诱发地震监测资料,以发生诱发地震单元的第一主应力、第三主应力、位移作为危险单元的标准,对单元进行二次评价。研究结果表明,建立同一GIS平台下的水库区地质环境、监测资料数据库是建立多因素综合评价模型的基础。采用地震评估模型对模拟结果进行评估,结合监测资料对评估成果进行修正,在三峡库首区水库诱发地震危险性评价中具有一定的可信度。  相似文献   

16.
Investigating the dilatancy, acoustic emission and failure characteristics of fissured rock are significant to ensure their geotechnical stability. In this paper, the uniaxial and triaxial compression experiments with AE monitoring under different loading rates were carried out on fissured rock specimens with the same geometrical distribution of two pre-existing flaws. The dilatancy and AE activity of these specimens were discussed, and the effects of the confining pressure and loading rate on the mechanical parameters and failure characteristics were analyzed. The results show that the exponential strength criterion is more suitable than the Mohr–Coulomb strength criterion to characterize the strength characteristics of fissured rock. The crack evolution and failure characteristics of fissured rock specimens are more complicated than those of intact rock specimens. The failure characteristics of the fissured rock follow the tensile shear coalescence model, crack branching occurs with increasing the loading rate, and the multi-section coalescence model is verified with increasing the confining pressure. The phenomena of stress drop and yield platform usually occur after the dilatancy onset, the specimen does not fail instantaneously, and the propagation and coalescence of cracks cause a sharp increase in the AE signals, circumferential strain, and volumetric strain.  相似文献   

17.
在广义的Mohr空间研究材料的破坏和屈服(失效),找到了主应力空间和广义Mohr空 间中失效曲面的变换,以及适用于所有失效准则的应力和失效面法向的普适相容关系. 对于 双剪强度理论,根据它在广义Mohr空间的表示,将之归于最大偏应力理论一类.  相似文献   

18.
基于模糊不确定性向随机不确定性的等价转换和有限元分析计算,建立了以失效模式相对重要度为依据的广义主要失效模式枚举的工程准则法.该方法可以综合考虑材料参数、结构几何以及外载荷等基本变量的随机和模糊两种不确定性因素对失效模式相对重要度的影响,通过合理选择门槛值,可以在保证计算精度的基础上尽可能的减小计算工作量.以平尾转轴的模糊随机可靠性分析为算例,给出了门槛值的经验值,并说明了所建工程准则法的合理性.  相似文献   

19.
各向异性编织CMC弯曲断裂失效模型   总被引:1,自引:0,他引:1  
通过对缺口弯曲断裂试验的研究发现,编织CMC存在两种断裂失效模式:界面主导的和纤维束主导的失效模式.针对这两种模式建立了界面失效模型和纤维束断裂失效模型.界面失效模型用半经验方法处理弱界面和大编织角度的断裂强度问题;纤维束断裂失效模型采用解析方法处理较强界面和小角度的断裂强度问题,为含有缺口试件的弯曲强度预报打下了初步的理论基础.  相似文献   

20.
In order to combine the Mohr–Coulomb criterion and the critical state models for soils, a transformed stress tensor based on the Mohr–Coulomb criterion is proposed. The new stress tensor is determined by a transformation that makes the Mohr–Coulomb criterion become a cone having an axis as the space diagonal in transformed principal stress space, and is applied to the Cam-clay and Sekiguchi–Ohta models, which are two typical isotropic and anisotropic hardening critical state models for soils, for improving modelling capability of describing soil behaviour in general stresses. The revised models give more accurately predicted results than the original ones.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号