Mapping a homopolymer onto a model fluid

We describe a linear homopolymer using a grand canonical ensemble formalism, a statistical representation that is very convenient for formal manipulations. We investigate the properties of a system where only next neighbor interactions and an external, confining, field are present and then show how a general pair interaction can be introduced perturbatively, making use of a Mayer expansion. Through a diagrammatic analysis, we shall show how constitutive equations derived for the polymeric system are equivalent to the Ornstein-Zernike and Percus-Yevick equations for a simple fluid and find the implications of such a mapping for the simple situation of Van der Waals mean field model for the fluid.     

两嵌段共聚高分子链通过薄膜上纳米孑孔隙输运的研究

针对两嵌段高分子链的跨膜输运过程,分别给出与不同输运次序相对戍的高分子链的自由能,进而通过求解Fokker-Planck方程并在不同条件下对平均首次通过时间进行了数值计算.计算结果表明,当共聚高分子链由良溶剂区向不良溶剂区输运时,不能发生线团一链滴转变的链首先输运总是有利于整个高分子链的输运.而在给定输运次序的情况下,化学势、线团一链滴转变、共聚链的组成以及输运速率等因素对输运时间可产生显著影响.相关研究结果可为调控实际生物高分子链的输运时间提供可能的理论线索.     

Formation of a tris-capsule and a tris-carceplex from a cyclic six-bowl assembly

A macrocycle composed of six cavitands was assembled into a tris-capsule and a tris-carceplex, each of which encapsulates three guest molecules.     

Effective spring description of a bubble or a droplet interacting with a particle

It is shown that the interaction of a particle with a liquid drop or a gas bubble may be quantitatively described over the whole distance regime by treating the fluid interface as a Hookean spring. An algorithm suitable for analyzing atomic force microscopy data suitable for a calculator or a spread-sheet is given and applied to data for oil drops.     

Wetting of a drop on a sphere

In this work, the equilibrium morphology of a drop on a sphere is analyzed as a function of the contact angle and drop volume experimentally and with analytical effective interfacial energy calculations. Experimentally, a drop on a sphere geometry is realized in an oil bath by placing a water drop on a sphere coated with a dielectric, of which the radii of curvature are comparable with that of the drop. Electrowetting (EW) is used to change the contact angle of the water drop on the sphere. To validate the applicability of EW and the Lippman-Young equation on nonflat surfaces, we systematically investigate the response of the contact angle to the applied voltage (EW response) for various drop volumes and compared the results with the case of a planar surface. The effective interfacial energy of two competing morphologies, namely, the spherically symmetric "completely engulfing" and "partially engulfing" morphologies are calculated analytically. The analytical calculations are then compared to the experimental results to confirm which morphology is energetically more favored for a given contact angle and drop volume. Our findings indicate that the "partially engulfing" morphology is always the energetically more favorable morphology.     

Influence of the electric field on a particle in a space with a disclination

We consider a quantum particle in a space with a linear topological defect, i.e., disclination. The effect of the uniform electric field in this space, on the particle, is shown to cause a translation of the wave function. In addition, the electric field is not found to be affected by the defect. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Arylation of a carbanion derived from a pyridazine; a route to a functionalized aren

1,4-Dichlorobenzene(cyclopentadienyl)iron(II) hexafluorophosphate reacts with the carbanion derived from 3-ethoxy-6-methylpyridazine N-oxide to give a Yanovsky-type adduct.     

Motion of a drop on a solid surface due to a wettability gradient

The hydrodynamic force experienced by a spherical-cap drop moving on a solid surface is obtained from two approximate analytical solutions and used to predict the quasi-steady speed of the drop in a wettability gradient. One solution is based on approximation of the shape of the drop as a collection of wedges, and the other is based on lubrication theory. Also, asymptotic results from both approximations for small contact angles, as well as an asymptotic result from lubrication theory that is good when the length scale of the drop is large compared with the slip length, are given. The results for the hydrodynamic force also can be used to predict the quasi-steady speed of a drop sliding down an incline.     

Taming Mars with a tent and a tunnel: creation of a biosphere-city

An unconventional site-specific outdoor utility sculpture, used as a Strait of Gibraltar stopper, may soon store unwanted Earth-atmosphere derived wastes (mineralized CO2 and CFCs) for hundreds of years. Such a Land Art processing facility, an anti-global warming/cooling antidote, is an appropriate macro-engineering response to allegedly impending human survival macro-problems.     

Chaperone-assisted translocation of a polymer through a nanopore

Using Langevin dynamics simulations, we investigate the dynamics of chaperone-assisted translocation of a flexible polymer through a nanopore. We find that increasing the binding energy ε between the chaperone and the chain and the chaperone concentration N(c) can greatly improve the translocation probability. Particularly, with increasing the chaperone concentration a maximum translocation probability is observed for weak binding. For a fixed chaperone concentration, the histogram of translocation time τ has a transition from a long-tailed distribution to a gaussian distribution with increasing ε. τ rapidly decreases and then almost saturates with increasing binding energy for a short chain; however, it has a minimum for longer chains at a lower chaperone concentration. We also show that τ has a minimum as a function of the chaperone concentration. For different ε, a nonuniversal dependence of τ on the chain length N is also observed. These results can be interpreted by characteristic entropic effects for flexible polymers induced by either the crowding effect from a high chaperone concentration or the intersegmental binding for the high binding energy.     

Dynamic molecular recognition in the generation of a new crystal-engineering motif: a unique case study of a dicarboxylic acid with a ditopic receptor favouring a polymeric over a dimeric hydrogen-bonded supramolecular complex

A new crystal-engineering motif has been developed where a ditopic receptor 1 shows a novel syn-syn hydrogen-bonded polymeric supramolecular complex (Fig. 4b) (instead of a 1:1 dimeric syn-syn or polymeric syn-anti complex) giving rise to a hydrogen-bonded stair-like polymeric ribbon structure between the binding groups of the receptor pyridine amide and the carboxyl groups of the guest substrate.     

PHOTOSENSITIZING PROPERTIES OF BACTERIOCHLOROPHYLLIN a and BACTERIOCHLORIN a, TWO DERIVATIVES OF BACTERIOCHLOROPHYLL a

Abstract The photosensitizing properties of two water soluble derivatives of bacteriochlorophyll a , bacteriochlorophyllin a and bacteriochlorin a (lacking the central Mg-ion) were investigated and compared to those of hematoporphyrin derivatives. At physiological pH the oxygen consumption rate of histidine, tryptophan, dithiothreitol and guanosine upon illumination was 3 to 4 times higher when bacteriochlorin a was used as photosensitizer than when hematoporphyrin derivatives were used. Especially bacteriochlorin a proved to be an effective sensitizer for the killing of L929 cells. Because bacteriochlorin a has an absorption maximum at 765 nm in phosphate buffered saline (allowing a light penetration in tissue about ten times larger than at 630 nm) and a high molar absorption coefficient (32 000 M cm⁻¹) it has promising possibilities for the application in photodynamic therapy.     

Ordered nano-structure of a stamped self-organized protein layer on a HOPG surface using a HFB carrier

A groundbreaking method for ordered molecular layer preparation on a solid surface employing the drop-stamp method has been developed by us taking advantage of the characteristics of the HFB molecule as a self-organizer/adsorption carrier. It is a smart method which can be used to prepare a self-organized protein layer on a solid surface without unspecific adsorption or defects. In our previous report, we clarified the self-organizing nature of HFB-tagged protein molecules on a surface of a solution droplet. In this report, a protein layer was prepared on a HOPG surface by using the drop-stamp method with a maltose binding protein (MBP)-tagged HFBII molecule. The structure of the stamped protein layer was investigated using frequency modulation atomic force microscopy (FM-AFM) in a liquid condition. The FM-AFM images show that the drop-stamp method can prepare an ordered protein layer on a solid surface smartly. The drop-stamp method using a HFB carrier is a practical method which can be used to prepare an ordered protein layer on a solid substrate surface without unspecific adsorption defects.     

Design of a portable gas chromatography with a conducting polymer nanocomposite detector device and a method to analyze a gas mixture

A portable chromatography device and a method were developed to analyze a gas mixture. The device comprises a chromatographic column for separating components of a sample of the gas mixture. It has an air pump coupled to the inlet of a chromatographic column for pumping air and an injector coupled to the inlet of chromatographic column for feeding the sample using the air as a carrier gas. A detector is arranged downstream from and coupled to the outlet of the chromatographic column. The detector is a nanostructure semiconductive microfiber. The device further comprises an evaluation unit arranged and configured to evaluate each detected component to determine the concentration. The designed portable system was used for simultaneous detection of amines. The possibility of applying dispersive liquid–liquid microextraction for the determination of analytes in trace levels is demonstrated. The reproducibility of this method is acceptable, and good standard deviations were obtained. The relative standard deviation value is less than 6% for all analytes. Finally, the method was successfully applied to the extraction and determination of analytes in water samples.     

Force of a gas bubble on a foreign particle in front of a freezing interface

We monitored the formation and development of a single gas bubble on the surface of a spherical particle of size 1.676 mm under unidirectional freezing and thawing (4.6-5.0 microm/s) and for the first time quantitatively estimated the force exerted on this particle by measuring the deformation of an attached elastic stick. The bubble would nucleate and grow on the particle surface closest to the ice front, while the force curve for a freezing-thawing cycle presented a hysteresis characteristic. This force was much greater than in the case without a bubble, and hence it dominated the engulfment process in the present freezing tests. The bubble force increased with increasing bubble size and was shown to be mainly attributable to the elastic force by the deformed bubble shape. Comments were made on the need to incorporate the role of bubbles in predicting the critical velocity to freeze a suspension with high dissolved gas content.     

Construction of a protein-detection system using a loop peptide library with a fluorescence label

Construction of a novel protein-detection system was carried out using a designed peptide library with fluorescent labels based on loop structures. As a basic model study, detection of alpha-amylase using fluorescent-labeled peptides derived from an active loop of tendamistat was examined. The detection methods for proteins with immobilized peptides as well as peptides in solution have been successfully established. Based on these results, a loop peptide library that has various turn sequences grafted on a stable loop structure has been constructed. Various proteins with recognition patterns corresponding, for instance, to "protein fingerprints" could be detected using an immobilized peptide library. The present results suggest that the system can be applied to the development of a peptide microarray that behaves as a protein chip.