Synthesis, characterization and antimicrobial activity of 3d transition metal complexes of a biambidentate ligand containing quinoxaline moiety

A new series of oxovanadium(IV), chromium(III), manganese(II), iron(III), cobalt(II), nickel(II), and copper(II) complexes of the 3-hydrazino quinoxaline-2-one (HQO) were prepared and characterized. The ligand exhibits biambidenticity. It behaves as a bidentate ON donor in oxovanadium(IV), iron(III) and copper(II) complexes and as a bis bidentate ONNN donor in chromium(III), manganese(II), cobalt(II) and nickel(II) complexes. The nature of bonding and the stereochemistry of the complexes have been deduced from elemental analyses, thermal, infrared, ¹H NMR, electronic spectra, magnetic susceptibility and conductivity measurements. An octahedral geometry was suggested for all the complexes. All the complexes show subnormal magnetic moments. The ligand, HQO, and its complexes were tested against one strain Gram +ve bacteria (Staphylococcus aureus), Gram −ve bacteria (Escherichia coli). The prepared metal complexes exhibited higher antimicrobial activities than the parent ligand.     

Speciation studies by capillary electrophoresis- Simultaneous determination of chromium(III) and chromium(VI)

A method for the simultaneous determination of chromium(III) and chromium(VI) by capillary electrophoresis (CE) has been developed. The chromium(III) has been chelated with 1,2-cyclohexanediaminetetraacetic acid (CDTA) in order to impart a negative charge and similar mobility to both the chromium(III) and the chromium(VI) species. The effects of the amount of the reagent, pH and heating time required to complete the complexation have been studied. Factors affecting the CE behaviour such as the polarity of electrodes and the pH of electrophoretic buffer have been investigated. The separated species have been monitored by direct UV measurements at 214 nm. The detection limits achieved are 10 g/l for Cr(VI) and 5 g/l for Cr(III) and linear detector response is observed up to 100 mg/l. The procedure has been applied to the determination of both chromium species in industrial electroplating samples and its accuracy was checked by comparing the results (as total chromium) with those of atomic absorption spectrometry. No interference occurred from transition metal impurities under optimized separation conditions. The method is also shown to be feasible for determining Cr(III) as well as other metal ions capable to form complexes with CDTA (like iron(III), copper(II), zinc(II) and manganese(II)) in pharmaceutical preparations of essential trace elements.     

Synthesis and spectral studies of chromium(III), cobalt(II) and nickel(II) complexes with phenylhydrazonoamidoxime

Summary Mononuclear complexes of chromium(III), nickel(II) and cobalt(II) derived from 3-oxo-2-phenylhydrazonobutane1-carbamidoxime (OPCA) were prepared and characterized by elemental analysis, molar conductance, magnetic susceptibility measurements and electronic and i.r. studies. The chromium(III) and nickel(II) ions form 1:2 complexes, whereas cobalt(II) forms a 1:1 complex in which the ligand chelates through the nitrogen of the amidoxime and the carbonyl oxygen. An octahedral structure is assigned to these complexes and the ligand field parameters such as Dq, B and were calculated. The nephelexautic parameter, , has values of 0.68, 0.84 and 0.78 for the chromium(III), cobalt(II) and nickel(II) complexes, respectively, suggesting the presence of covalent metal-ligand -bonds.     

Synthesis and magnetic properties of μ-oxalato-bridged Cu2 IIFeIII-type heterotrinuclear complexes

Three new -oxalato-bridged heterotrinuclear copper(II)–iron(III)–copper(II) complexes have been synthesized and identified: [Cu₂Fe(ox)₃L₂]ClO₄ [L = 5-nitro-1,10-phenanthroline (NO₂phen); 2,9-dimethyl-1,10-phenanthroline (Me₂phen) or 2,2-bipyridine (bpy), respectively]; ox = the oxalato dianions. Based on elemental analyses, molar conductivity and magnetic moment (at room-temperature) measurements, i.r. and electronic spectral studies, extended ox-bridged structures consisting of two copper(II) and an iron(III) ions, in which the central iron(III) ion has an octahedral environment and the end-capped two copper(II) ions a square-planar environment, are proposed for these complexes. The [Cu₂Fe(ox)₃(Me₂phen)₂]ClO₄ (1) and [Cu₂Fe(ox)₃(bpy)₂]ClO₄ (2) complexes were characterized further by variable-temperature magnetic susceptibility (4.2–300 K) measurements and the observed data were simulated by the equation based on the spin Hamiltonian operator, = –2J₁ · ₂, giving the exchange integrals J = –12.85 cm^–1 for (1) and J = –11.28 cm^–1 for (2). The results indicate the presence of an antiferromagnetic spin-exchange interaction between the copper(II) and iron(III) ions through the oxalato-bridge in both complexes (1) and (2).     

Chemistry of the phenylglyoxal-p-diethylaminoanil and/or thiourea substituted ammine complexes

Summary Mixed ligand complexes of chromium(III), cobalt(II), cobalt(III), copper(II) and zinc(II) involving either the phenylglyoxal-p-diethylaminoanil and/or thiourea, and ammonia have been obtained by the partial or complete replacement of the strongly coordinated ammonia of ammine complexes. All the products were characterized by elemental analysis, molar conductance, magnetic susceptibility and i.r. and electronic spectral measurements for their bonding and structures.     

Catalytic activities of polymer‐supported metal complexes in oxidation of phenol and epoxidation of cyclohexene

The metal complexes of N, N′‐bis (o‐hydroxy acetophenone) propylene diamine (HPPn) Schiff base were supported on cross‐linked polystyrene beads. The complexation of iron(III), copper(II), and zinc(II) ions on polymer‐anchored HPPn Schiff base was 83.4, 85.7, and 84.5 wt%, respectively, whereas the complexation of these metal ions on unsupported HPPn Schiff base was 82.3, 84.5, and 83.9 wt%. The iron(III) complexes of HPPn Schiff base were octahedral in geometry, whereas copper(II) and zinc(II) ions complexes were square planar and tetrahedral. Complexation of metal ions increased the thermal stability of HPPn Schiff base. Catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in the presence of hydrogen peroxide. The polymer‐supported HPPn Schiff base complexes of iron(III) ions showed 73.0 wt% conversion of phenol and 90.6 wt% conversion of cyclohexene at a molar ratio of 1:1:1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 63.8 wt% conversion for phenol and 83.2 wt% conversion for cyclohexene. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 93.1 and 98.3 wt%, respectively with supported HPPn Schiff base complexes of iron(III) ions but was lower with HPPn Schiff base complexes of copper(II) and zinc(II) ions. Activation energy for the epoxidation of cyclohexene and phenol conversion with unsupported HPPn Schiff base complexes of iron(III) ions was 16.6 kJ mol^?1 and 21.2 kJ mol^?1, respectively, but was lower with supported complexes of iron(III) ions. Copyright © 2007 John Wiley & Sons, Ltd.     

Polymeric copper(II) and nickel(II) complexes of a tetraoxime containing a binucleating macrocycle ligand

Polymeric copper(II) and nickel(II) complexes of a binucleating tetraoxime macrocycle, 6,6-methylene-bis[1,12-di(hydroximino)- 2,3;9,10-dibenzo-1,11-diaza-4,8-dithiacyclotridecane] (H4L), have been prepared and characterised by elemental analysis, magnetic moments, i.r., uv/vis., and e.p.r. spectral studies. I.r. spectra show that the ligand acts in a tetradentate manner and coordinates via N, S and O donor atoms. The geometry of the resulting metal chelates is discussed with the help of magnetic and spectroscopic measurements. The elemental analyses, stoichiometry and the spectroscopic data of the complexes indicate that the copper(II) and nickel(II) ions are coordinated by the coordination environment of the ligand. The spectral data suggest a distorted tetragonal geometry for polymeric copper(II), and nickel(II) ions in the complexes. The stoichiometry of the metal-to- H4L ratio of complexes (2) and (3), prepared from CuCl2 and NiCl2 respectively, was 3:1, suggesting the formation of polymeric species.     

Komplexe von N,N-Di-(β-hydroxyäthyl)-dithiocarbaminat mit Übergangs- und Nachübergangs-Elementen

The complexation tendencies of N,N-di-(-hydroxyethyl)-dithiocarbamic acid [DEADTCH, (CH₂CH₂OH)₂NCSSH] towards a large number of metal ions have been examined. The complexes formed with transition and post-transition metal ions in slightly acidic and neutral solutions have the general formulaM(DEADTC) _x, wherex is the valence state of the metal,M=Cr(III), Fe(III), Co(III), Ni(II), Cu(II), Zn(II), Cd(II), Hg(II), Tl(I), and Tl(III). In addition the interesting mixed ligand complex ClHg(DEADTC) was prepared. These complexes have been characterised through X-ray, magnetic, conductance and spectral (UV and IR) measurements.     

Simultaneous ion-pair chromatography of inorganic anions and cations using on-column derivatization with chelating agents and UV detection

Six complexones have been investigated as on-column derivatizing agents for the simultaneous separation of inorganic anions and cations using ion pair chromatography. UV spectrophotometry at 210 nm has been applied for both the direct and the indirect detection of anions and anionic metal complexes. Under the experimental conditions used DCTA and DTPA have been practically applicable. Factors affecting the chromatographic behaviour of analyte ions have been studied. Chloride, nitrite, nitrate sulphate, chromate, molybdate, iron, chromium (III), copper (II), cobalt (II), nickel (II) and mercury (II) ions have been separated in 30 min with a mobile phase containing 1 mmol/1 TBA and 0.5 mmol/1 DCTA at pH 6.2 in acetonitrile-water (10:90 v/v). With DTPA as eluent and using pre-column derivatization of metal cations with DCTA eight anions and six metal cations can be separated. The detection limits are less than 0.1 mg/l for most of the investigated ions. Permanent address: Department of Analytical Chemistry, Vilnius University, Naugarduko 24, 2006 Vilnius, Lithuania     

Speciation studies by capillary electrophoresis- Simultaneous determination of chromium(III) and chromium(VI)

A method for the simultaneous determination of chromium(III) and chromium(VI) by capillary electrophoresis (CE) has been developed. The chromium(III) has been chelated with 1,2-cyclohexanediaminetetraacetic acid (CDTA) in order to impart a negative charge and similar mobility to both the chromium(III) and the chromium(VI) species. The effects of the amount of the reagent, pH and heating time required to complete the complexation have been studied. Factors affecting the CE behaviour such as the polarity of electrodes and the pH of electrophoretic buffer have been investigated. The separated species have been monitored by direct UV measurements at 214 nm. The detection limits achieved are 10 microg/l for Cr(VI) and 5 microg/l for Cr(III) and linear detector response is observed up to 100 mg/l. The procedure has been applied to the determination of both chromium species in industrial electroplating samples and its accuracy was checked by comparing the results (as total chromium) with those of atomic absorption spectrometry. No interference occurred from transition metal impurities under optimized separation conditions. The method is also shown to be feasible for determining Cr(III) as well as other metal ions capable to form complexes with CDTA (like iron(III), copper(II), zinc(II) and manganese(II)) in pharmaceutical preparations of essential trace elements.     

High performance liquid chromatographic separation and UV determination of cobalt, copper iron and platinum in pharmaceutical preparations using bis(isovalerylacetone)ethylenediimine as complexing reagent

The reagent bis(isovalerylacetone)ethylenediimine(H₂IVA₂en) has been examined for HPLC separation and UV determination of cobalt, copper, iron and platinum using off-line precolumn derivatization and extraction in chloroform. The complexes of cobalt(II), cobalt(III), iron(II), iron(III) and the reagent have been subsequently separated on a Microsorb C-18 column. The complexes were eluted isocratically using ternary mixtures of methanol/water/acetonitrile. Detection was achieved by UV monitoring. Detection limits for Co(II), Co(III), Fe(II) and Fe(III) were 2.5–5.0 ng/injection, based on 0.5–1.0 g/ml with 5 l/injection. The concentration of cobalt(II) and cobalt(III) in aqueous solution have been determined. The presence of oxovanadium(IV), platinum(II), and nickel(II) did not affect the determinations. The HPLC method developed has been applied to the determination of cobalt, copper, iron and platinum in pharmaceutical preparations at the 30 g/g to 15 mg/g level and the obtained results were compared to those of atomic absorption spectrometry.     

Iron(II), cobalt(II), nickel(II) and copper(II) chelates of 1,1′-Dibenzoylacetylferrocene

Summary 1,1-Dibenzoylacetylferrocene (DBAFc) complexes of iron(II), cobalt(II), nickel(II) and copper(II) have been prepared and characterized. The physical properties of the complexes are discussed on the basis of uv-visible, Mössbauer spectra and magnetic measurements.     

Transition metal complexes of novel tridentate S,N,O donor ligands

Summary Complexes of chromium(III), iron(III), cobalt(III), nickel(II) and copper(II) with salicylaldehyde N(1-piperidyl) thiocarbonyl hydrazone (spthH₂), salicylaldehyde N-(1-morpholyl) thiocarbonyl hydrazone (smthH₂), 2-hydroxy 4-methyl acetophenone N-(1-piperidyl) thiocarbonyl hydrazone (apthH₂) and 2-hydroxy 4-methyl acetophenone N-(1-morpholyl) thiocarbonyl hydrazone (amthH₂) have been prepared and characterized by analytical, spectral and magnetic measurements. Mixed ligand complexes of Cu^II-thiocarbonyl hydrazones and heterocyclic bases have been isolated. Depending on the nature of the metal salts used and the reaction conditions the thiocarbonyl hydrazones act as neutral or dibasic tridentate ligands.     

Metal complexes of sulphur-nitrogen chelating agents. Part 14. Nickel(II), palladium(II), copper(II), cobalt(II), and cobalt(III) complexes of the tetradentate schiff bases having ONNS donor sites

Summary Complexes of nickel(II), palladium(II), copper(II), cobalt(II), and cobalt(III) with methyl-2-(-salicylaldiminoethyl)-cyclopent-1-en-dithiocarboxylate (H₂L¹) and methyl-2-(-salicylaldiminoisopropyl)cyclopent-1-en-dithiocarboxylate (H₂L²) have been prepared. They contain the donor sites ONNS. The metal(II) ions from neutral, monomeric square planar chelate complexes. The cobalt(III) complexes [CoL¹-(H₂O)₂]X (X=Cl or ClO₄) appear to betrans-diaqua-species. All compounds have been characterized by a number of physico-chemical methods.     

Mixed metal hydroxycarboxylic acid complexes. Spectrophotometric study of complexes of U(VI) with In(III), Cu(II), Zn(II) and Cd(II)

The formation of mixed metal complexes between uranium (VI), as the central metal ion, and aluminium (III), indium (III), copper (II), zinc (II) and cadmium (II), as the additional metal ions, with a hydroxycarboxylic acid chosen between citric, tartaric or malic, has been studied using spectrophotometric methods.The effect of pH has been examined, and the results show that at pH=4 stable complexes are formed for most of the systems. At this pH the method of mole ratio and Job's method of continuous variations, were employed to determine the stoichiometry of the mixed metal complexes. Al(III), In(III) and Cu(II) showed a high tendency to form mixed metal complexes with U(VI), while the formation of complexes is uncertain for Cd(II) and Zn(II). The ratio of the ligand to the total metal ion has been found to be 21 and metal:metal ratios of 11 and 12 have been observed.Represents part of the Ph.D. thesis submitted by Emanuel Manzurola to Ben Gurion University of the Negev.     

Iron(II), cobalt(III), nickel(II) and copper(II) chelates of furan and thiophene azo-oximes

Summary Complexes of furan and thiophene azo-oximes with iron(II), cobalt(III), nickel(II) and copper(II) have been prepared and characterised. Iron(II), cobalt(III) and copper(II) complexes are diamagnetic in the solid state. The diamagnetism of the copper(II) chelates is suggestive of antiferromagnetic interaction between two copper centres.¹H n.m.r. spectral data suggest atrans-octahedral geometry for the tris-chelates of cobalt(III). Nickel(II) complexes are paramagnetic, in contrast to the diamagnetism of the analogous complexes of arylazooximes. The electronic spectra are suggestive of octahedral geometry for the iron(II), cobalt(III) and nickel(II) complexes, andD _4h -symmetry for copper(II). Infrared data indicate N-bonding of the oximino-group to the metal ions.     

New complexes of iron(II), cobalt(II), nickel(II) and copper(II) with 2,2′-dipyridylmethane

Summary 2,2-Dipyridylmethane reacts with iron(II), cobalt(II), nickel(II) and copper(II) salts to form complexes of a varied stereochemistry depending upon the metal and the anion involved,Pseudo-tetrahedral, octahedral and square-planar complexes containing this ligand have been prepared and characterized by elemental analysis, conductivity data, room temperature magnetic moments and electronic spectra.     

Mononuclear and Binuclear Fe(III), Co(II), Ni(II), and Cu(II) Complexes of 3,4′-Dihydroxyazobenzene-3′,4-dicarboxylic Acid and 3-Carboxy-4-hydroxyphenylazo-3-carboxy-4-hydroxynaphthalene

Summary. Fe(III), Co(II), Ni(II), and Cu(II) complexes of the title azodyes have been synthesized and characterized by elemental analysis, molar conductance, TGA, DTA, magnetic susceptibility measurements, IR, electronic and ESR spectral studies. The spectral studies suggest an octahedral geometry for Fe(III) and Co(II) complexes but a square planar geometry for Ni(II) and Cu(II) complexes. The kinetics of the catalysed oxidation of N,N,N,N-tetramethyl-p-phenylenediamine dihydrochloride (TMPPD) with mononuclear and binuclear copper complexes were studied to check the activity of these copper complexes in oxidizing organic amines. The electrochemical behaviour of the metal complexes was studied using DC polarography and cyclic voltammetry. Antimicrobial activity of the azo compounds and its complexes have been tested against different microorganisms.     

Mononuclear and Binuclear Fe(III), Co(II), Ni(II), and Cu(II) Complexes of 3,4′-Dihydroxyazobenzene-3′,4-dicarboxylic Acid and 3-Carboxy-4-hydroxyphenylazo-3-carboxy-4-hydroxynaphthalene

Fe(III), Co(II), Ni(II), and Cu(II) complexes of the title azodyes have been synthesized and characterized by elemental analysis, molar conductance, TGA, DTA, magnetic susceptibility measurements, IR, electronic and ESR spectral studies. The spectral studies suggest an octahedral geometry for Fe(III) and Co(II) complexes but a square planar geometry for Ni(II) and Cu(II) complexes. The kinetics of the catalysed oxidation of N,N,N,N-tetramethyl-p-phenylenediamine dihydrochloride (TMPPD) with mononuclear and binuclear copper complexes were studied to check the activity of these copper complexes in oxidizing organic amines. The electrochemical behaviour of the metal complexes was studied using DC polarography and cyclic voltammetry. Antimicrobial activity of the azo compounds and its complexes have been tested against different microorganisms.     

Novel repaglinide complexes with manganese(II), iron(III), copper(II) and zinc(II): Spectroscopic,DFT characterization and electrochemical behaviour

Novel transition metal complexes with the repaglinide ligand [2-ethoxy-4-[N-[1-(2piperidinophenyl)-3-methyl-1-1butyl] aminocarbonylmethyl]benzoic acid] (HL) are prepared from chloride salts of manganese(II), iron(III), copper(II), and zinc(II) ions in water-alcoholic media. The mononuclear and non-electrolyte [M(L)₂(H₂O)₂]?nH₂O (M = Mn²⁺, n = 2, M = Cu²⁺, n = 5 and M = Zn²⁺, n = 1) and [M(L)₂(H₂O)(OH)]?H₂O (M = Fe³⁺) complexes are obtained with the metal:ligand ratio of 1:2 and the L-deprotonated form of repaglinide. They are characterized using the elemental and molar conductance. The infrared, ¹H and ¹³C NMR spectra show the coordination mode of the metal ions to the repaglinide ligand. Magnetic susceptibility measurements and electronic spectra confirm the octahedral geometry around the metal center. The experimental values of FT-IR, ¹H, NMR, and electronic spectra are compared with theoretical data obtained by the density functional theory (DFT) using the B3LYP method with the LANL2DZ basis set. Analytical and spectral results suggest that the HL ligand is coordinated to the metal ions via two oxygen atoms of the ethoxy and carboxyl groups. The structural parameters of the optimized geometries of the ligand and the studied complexes are evaluated by theoretical calculations. The order of complexation energies for the obtained structures is as follows:

$$Fe(III) complex < Cu(II) complex < Zn(II) complex < Mn(II) complex.$$

The redox behavior of repaglinide and metal complexes are studied by cyclic voltammetry revealing irreversible redox processes. The presence of repaglinide in the complexes shifts the reduction potentials of the metal ions towards more negative values.