色谱与色谱/质谱法相结合分析热裂解汽油C9馏分

采用毛细管气相色谱-氢火焰离子化检测器（CGC-FID）和气相色谱-质谱法(GC/MS)分析了热裂解汽油C9 馏分的组成。实验使用PONA毛细管气相色谱柱(100 m×0.25 mm i.d.×0.5 μm),根据烃类化合物在PONA柱上的保留规律,以正构烷烃标样保留值作为碳数分布依据,定量分析了裂解汽油C9 馏分中烃类化合物的碳数分布和单体烃含量;用GC/MS联用技术和CGC保留值定性法相结合对裂解汽油C9 馏分中相对含量大于0.2%的39种化合物进行了定性。     

毛细管气相色谱法测定液化石油气中C_1～C_5组分的方法研究

用毛细管气相色谱法测定液化石油气中C1～C5间13种烃类组分,使用Al2O3大口径毛细管柱,用纯组分混合物作标样,方法快速、灵敏,各组分相对标准偏差为0．39％～5．40％,乙烷、乙烯、丁烷及丁烯异构体得到基线分离。     

Pulsed flow modulation comprehensive two-dimensional gas chromatography

Pulsed flow modulation (PFM) is based on higher flow rate time compression of the first GC column effluent, which prior to the injection into the second column is stored for a few seconds in a standard fused silica wide bore transfer line. We constructed the PFM device with two standard 1/16 in. brass compression fittings with the insertion of the two columns inside the wide bore 0.53 mm i.d. fused silica storage transfer line for the elimination of dead volumes. This simple arrangement provides a combination of flexibility in the length of the sample storage transfer line hence comprehensive two-dimensional gas chromatography (GC x GC) cycle time, inert sample path and full elimination of cooling gas consumption. A record short second column injection time of 20 ms is demonstrated. Practical injection times are the sample collection time (such as 4s) divided by the second to first column flow rate ratio (such as 20/0.7), which is typically around 150 ms. Due to the low cost of the device it can also be considered for use with non comprehensive time segmented GC x GC to remove a few accidental coelutions. PFM-GCxGC excels with high second column capacity due to the use of 0.32 mm i.d. columns with high flow rates as the second dimension GC x GC column. As a result, PFM-GCxGC can have up to two orders of magnitude higher second column sample capacity and linear dynamic range for improved reduction of adverse matrix interference effects due to column overloading.     

改变相比/顶空气相色谱法测定变压器油中溶解气体的分配常数

采用改变相比/顶空气相色谱法测定了甲烷、乙炔、乙烯、乙烷和丙烷在变压器油中的分配常数。顶空瓶中的气体样品经石英毛细管送到气相色谱仪的六通进样阀样品管中,然后进行分离和定量。采用标准曲线法定量,通过测定5个不同相比时轻烃组分的顶空浓度,计算顶空浓度倒数与相比之间的线性回归方程,测定了20 ℃和50 ℃时烃类气体在变压器油中溶解气体的分配常数。除甲烷外,计算所得的分配常数与文献值基本吻合,油中溶解气体浓度的实验值与实际值之间的相对误差小于4.14%,表明用此方法可以测定不同温度下变压器油中溶解气体的分     

外标归一化气相法测定天然气组成

 对SP 6000天然气分析仪的气路系统作了改进,实现了仪器自身标定。采用填充柱和毛细管柱分离,热导检测器和火焰电离检测器双检测器检测,外标 归一化法定量,简易、快速地测定了天然气组成。方法的准确度及精密度均符合气相法定量分析的要求。     

高效液相色谱/四极杆-飞行时间质谱测定神经性贝毒

采用高效液相色谱/四极杆 飞行时间质谱(HPLC/Q TOFMS)联用技术对贝类样品中的短裸甲藻毒素 PbTx-2 进行了检测研究。样品经丙酮提取、C18小柱净化后,用Zorbax XDB C18色谱柱(2.1 mm i.d.×150 mm,3.5 μ m)进行分离,流动相为甲醇 水(体积比为85∶15)溶液(含0.5 mmol/L NH4Ac),流速0.20 mL/min 。电喷雾正离子模式,选择质子化PbTx 2分子离子 ［M+H］ +作为前体离子进行TOFMS扫描、测定。结果表明,样品的平均加标     

气相色谱-质谱联用测定柴油机排气微粒中的可溶性有机组分

采用气相色谱-质谱联用技术(GC/MS)对柴油机排气微粒中的可溶性有机组分(SOF)进行了分离分析。SOF分析液样品采用超声提取法制取。GC条件为:SE-50型石英毛细管色谱柱(30 m×0.2 mm i.d.×0.2 μm）;程序升温：初始温度100 ℃,恒温2.0 min,以4.0 ℃/min升至160 ℃,再以8 ℃/min升至250 ℃,恒温31.75 min;汽化室温度260 ℃;载气为氦气,柱头压力45 kPa;进样量1 μL。MS条件为:电子轰击离子源,电子轰击能量70 eV;倍增器电压18     

Higher mass loadability in comprehensive two-dimensional gas chromatography-mass spectrometry for improved analytical performance in metabolomics analysis

A major challenge in metabolomics analysis is the accurate quantification of metabolites in the presence of (extremely) high abundant metabolites. Quantification of metabolites at low concentrations can be complicated by co-elution and/or peak distortion when these metabolites elute close to high abundant metabolites. To increase the separation efficiency a comprehensive two-dimensional gas chromatographic-mass spectrometric method (GC x GC-MS) was set up, in which a polar first dimension column and an apolar second dimension column were used to maximize the peak capacity. The feasibility of using wider bore, thicker film columns in the second dimension to improve the mass loadability and inertness of the analytical system was investigated. Several column combinations with varying second dimension column dimensions were compared with a setup with a narrow bore column (0.1mm I.D.) in the second dimension. With a wider bore column (0.32 mm I.D.) in the second dimension the mass loadability was improved 10-fold, and the more inert column surface of the thicker film second dimension column resulted in a more accurate (automated) quantification and improved linearity in the presence of high concentrations of matrix compounds or metabolites. These benefits amply compensated the observed decrease in peak capacity of 40% compared to the narrow bore (0.1mm I.D.) thin film second dimension column. Compared to GC-MS and conventional GC x GC-MS, better performance for quantification of metabolites for typical metabolomics samples was achieved.     

衍生化气相色谱法测定盐酸芬氟拉明片的纯度

 应用衍生化气相色谱法测定盐酸芬氟拉明片的纯度。样品溶解后经碱化乙酸乙酯提取 ,以盐酸美西律作内标 ,提取液用三氟乙酸酐进行酰化衍生化 ,衍生化产物在 5 %SE 30的色谱柱上分析 ,用氢火焰离子化检测器 (FID)检测。实验结果表明 ,芬氟拉明的质量浓度在 0 1g/L～ 0 5 g/L范围内线性良好 (r =0 9996 ) ;芬氟拉明与内标美西律的分离度大于 4;理论塔板数以芬氟拉明峰计大于 2 0 0 0 ;方法的精密度好 ,相对标准偏差 (RSD)为 1 4% (n=7) ;平均回收率为 (10 0 2± 2 2 ) % (n =6 ) ;检测限为 8ng。用该方法得到的结果灵敏、准确、重复性好。     

Evaluation of low-pressure gas chromatography linked to ion-trap tandem mass spectrometry for the fast trace analysis of multiclass pesticide residues

A rapid multiresidue method for the analysis of 72 pesticides has been developed using a single injection with low-pressure gas chromatography/tandem mass spectrometry (LP-GC/MS/MS). The LP-GC/MS/MS method used a short capillary column of 10 m x 0.53 mm i.d. x 0.25 microm film thickness coupled with a 0.6 m x 0.10 mm i.d. restriction at the inlet end. Optimal LP-GC conditions were determined which achieved the fastest separation in MS/MS detection mode. Also MS/MS conditions were optimized in order to increase sensitivity and selectivity. The analytical parameters of the LP-GC/MS/MS method were compared with those obtained by GC/MS/MS using a conventional capillary column (30 m x 0.25 mm i.d. x 0.25 microm film thickness). Better precision and sensitivity values were obtained with the LP-GC/MS/MS approach. The limits of detection (LOD) of the compounds ranged from 0.1 to 14.1 microg L(-1) for LP-GC/MS/MS, lower than those obtained for conventional GC/MS/MS that ranged from 0.1 to 17.5 microg L(-1). The peak widths obtained with the short column in LP-GC are similar to those obtained using conventional capillary GC columns, and the peaks can be successfully identified by MS/MS detection with the conventional scan speed of ion-trap instruments. In addition, the analysis time was significantly reduced with LP-GC/MS/MS (32 min) versus GC/MS/MS (72 min), allowing the number of samples analyzed per day in a routine laboratory to be doubled.     

Fast Temperature Programming in Gas Chromatography using Resistive Heating

The features of a resistive-heated capillary column for fast temperature-programmed gas chromatography (GC) have been evaluated. Experiments were carried out using a commercial available EZ Flash GC, an assembly which can be used to upgrade existing gas chromatographs. The capillary column is placed inside a metal tube which can be heated, and cooled, much more rapidly than any conventional GC oven. The EZ Flash assembly can generate temperature ramps up to 1200°/min and can be cooled down from 300 to 50°C in 30 s. Samples were injected via a conventional split/splitless injector and transferred to the GC column. The combination of a short column (5 m×0.25 mm i. d.), a high gas flow rate (up to 10 mL/min), and fast temperature programmes typically decreased analysis times from 30 min to about 2.5 min. Both the split and splitless injection mode could be used. With n-alkanes as test analytes, the standard deviations of the retention times with respect to the peak width were less than 15% (n = 7). First results on RSDs of peak areas of less than 3% for all but one n-alkane indicate that the technique can also be used for quantification. The combined use of a short GC column and fast temperature gradients does cause some loss of separation efficiency, but the approach is ideally suited for fast screening as illustrated for polycyclic aromatic hydrocarbons, organophosphorus pesticides, and triazine herbicides as test compounds. Total analysis times – which included injection, separation, and equilibration to initial conditions – were typically less than 3 min.     

Multidimensional Gas Chromatography–Mass Spectrometry Method for Fingerprinting Polycyclic Aromatic Hydrocarbons and Their Alkyl-Homologs in Crude Oil

The composition of polycyclic aromatic hydrocarbons in crude oil is usually too complex to use standard capillary gas chromatography to separate all of the components. In this study, a multidimensional gas chromatography–mass spectrometry (GC-MS) technique was used to analyze polycyclic aromatic hydrocarbon fractions of crude oil collected from the Dongying oil field in the Bohai Sea. A DB-17MS column (30?m?×?0.25?mm?×?0.25?µm) was used as a prefractionating column and only selected heart-cuts were transferred to the second chromatographic dimension (HP-5MS, 15?m?×?0.25?mm?×?0.25?µm) by a pressure-adjusted continual flow-type switching device for quantification of the polycyclic aromatic hydrocarbons. The chromatographic elements and parameters, such as detector selection and column combinations, were optimized. Naphthalene, phenanthrene, fluorene, dibenzothiophene, chrysene, and their C₁–C₄ alkyl homologs were identified. The profile of the polycyclic aromatic hydrocarbons obtained using the multidimensional GC-MS method was compared with the results obtained by traditional one-dimensional GC-MS.     

Application of low-pressure gas chromatography-ion-trap mass spectrometry to the analysis of the essential oil of Turnera diffusa (Ward.) Urb

Turnera diffusa Willd. var. afrodisiaca (Ward) Urb. (syn. T. aphrodisiaca) belongs to the family of Turneraceae and is an aromatic plant growing wild in the subtropical regions of America and Africa. It is widely used in the traditional medicine as e.g. anti-cough, diuretic, and aphrodisiac agent. This work presents a 3 min chromatographic analysis using low-pressure (LP) gas chromatography (GC)-ion-trap (IT) mass spectrometry (MS). The combination of a deactivated 0.6 m x 0.10 mm i.d., restrictor with a wide-bore CP-Wax 52 capillary column (10 m x 0.53 mm i.d., 1 microm) reduces the analysis time by a factor of 3-7 in comparison to the use of a conventional narrow bore column. Chromatographic conditions have been optimized to achieve the fastest separation with the highest signal/noise ratio in MS detection. These results allow fast and reliable quality control of the essential oil to be achieved.     

气相色谱-串联质谱法同时测定卷烟滤嘴中15种多环芳烃

建立了气相色谱-串联质谱同时检测卷烟滤嘴中15种多环芳烃的方法。卷烟滤嘴用二氯甲烷振荡萃取后,经0.22μm有机相滤膜过滤,采用DB-5MS色谱柱(30 m×0.25 mm,0.25μm)进行分离,电子轰击源、正离子模式下以多反应监测模式进行检测,内标法进行定量。15种多环芳烃(苊烯、苊、芴、菲、蒽、荧蒽、芘、苯并[a]蒽、屈、苯并[b]荧蒽、苯并[k]荧蒽、苯并[a]芘、二苯并[a,h]蒽、苯并[g,h,i]苝和茚并[1,2,3-c,d]芘)的线性关系良好,相关系数(R~2)为0.991 4~0.999 9。15种多环芳烃在低、中、高3个添加水平下的平均回收率为81.6%~111.2%;除了芴在低添加水平时相对标准偏差为19.2%外,其他相对标准偏差均小于16%。15种多环芳烃的检出限为0.02~0.24 ng/滤嘴,定量限为0.04~0.80 ng/滤嘴。方法前处理简便,具有快速、准确、灵敏度高及重复性好的优点,适用于卷烟滤嘴中多环芳烃的分析。     

高效液相色谱-气相色谱在线联用同时测定土壤中饱和烃和芳香烃

为加强对土壤中石油烃类污染物的风险管控,生态环境部已将石油烃类列为土壤中的重点监测项目.石油烃源于石油与合成油,是涵盖一定碳数范围的碳氢化合物,主要分为饱和烃和芳香烃两大类.芳香烃通常是高度烷基化的单环、双环与多环芳烃,其对人和动物的毒性较饱和烃大很多,因此,仅仅测定土壤中总石油烃含量难以准确评估其环境毒性.目前环境领...     

Extending the range of compounds amenable for gas chromatography-mass spectrometric analysis

Gas chromatography-mass spectrometry (GC-MS) suffers from a major limitation in that an expanding number of thermally labile or low volatility compounds of interest are not amenable for analysis. We found that the elution temperatures of compounds from GC can be significantly lowered by reducing the column length, increasing the carrier gas flow rate, reducing the capillary column film thickness and lowering the temperature programming rate. Pyrene is eluted at 287 degrees C in standard GC-MS with a 30 m x 0.25 mm I.D. column with 1-microm DB5ms film and 1-ml/min He column flow rate. In contrast, pyrene is eluted at 79 degrees C in our "Supersonic GC-MS" system using a 1 m x 0.25 mm I.D. column with 0.1-microm DB5ms film and 100-ml/min He column flow rate. A simple model has been invoked to explain the significantly (up to 208 degrees C) lower elution temperatures observed. According to this model, every halving of the temperature programming rate, or number of separation plates (either through increased flow rate or due to reduced column length), results in approximately 20 degrees C lower elution temperature. These considerably lower elution temperatures enable the analysis of an extended range of thermally labile and low volatility compounds, that otherwise could not be analyzed by standard GC-MS. We demonstrate the analysis of large polycyclic aromatic hydrocarbons (PAHs) such as decacyclene with ten fused rings, well above the current GC limit of PAHs with six rings. Even a metalloporphirin such as magnesiumoctaethylporphin was easily analyzed with elution temperatures below 300 degrees C. Furthermore, a range of thermally labile compounds were analyzed including carbamates such as methomyl, aldicarb, aldicarbsulfone and oxamyl, explosives such as pentaerythritol tetranitrate, Tetryl and HMX, and drugs such as reserpine (608 a.m.u.). Supersonic GC-MS was used, based on the coupling of a supersonic molecular beam (SMB) inlet and ion sources with a bench-top Agilent 6890 GC plus 5972 MSD. The Supersonic GC-MS provides enhanced molecular ion without any ion source related peak tailing. Thus, the lower GC separation power involved in the analysis of thermally labile and low volatility compounds is compensated by increased separation power of the MS gained from the enhanced molecular ion. Several implications of these findings are discussed, including our conclusion that slower chromatography leads to better analysis of thermally labile compounds.     

气相色谱法直接测定植物生长素

 建立了一种采用 5 3 0 μm大口径毛细管色谱柱、不经衍生化处理而直接测定吲哚乙酸 (IAA)、吲哚丁酸(IBA)和萘乙酸 (NAA)等植物生长素的气相色谱分析方法。以邻苯二甲酸二丁酯为内标物 ,用 FID检测 ,IAA,IBA和 NAA的相对标准偏差分别为 1 .1 4% ,0 .61 %和 0 .78%。方法简便、快速、准确、重现性好 ,可用于生长素类单组分和混合制剂的质量检测。     

丙烯腈中微量杂质的毛细管色谱法分析

提出了一种分析丙烯腈中微量杂质的大孔径ＯＶ－１０１和ＯＶ－１７ＳＣＯＴ串联柱及毛细管进样系统。结果表明串联柱具有寿命长和分离效率高的特点,定量分析误差小于４％。     

Applications of comprehensive two-dimensional gas chromatography to the characterization of petrochemical and related samples

This article discusses the application of comprehensive two-dimensional gas chromatography (GC x GC) to samples derived from petrochemicals. The use of GC x GC for characterization of petroleum and petroleum derivatives, through group type analysis, such as benzene, toluene, ethylbenzene, xylenes (BTEX), total aromatic hydrocarbons, polyaromatic hydrocarbons, and heteroatomic sulfur-, oxygen-, and nitrogen-containing compounds is presented. The capability of GC x GC to provide additional chemical-specific information regarding petroleum-processing steps, such as linear alkanes dehydrogenation, Fischer-Tropsch process, hydrogenation and oligomerization, is also described. In addition, GC x GC analyses of petrochemical biomarkers and environmental petrochemical-derived pollutants are reported. The role of comparison of samples through use of simple fingerprint approaches is highlighted.     

全二维气相色谱-飞行时间质谱联用技术分析重馏分油中芳烃组成

通过对升温速度、二维补偿温度、调制周期等关键实验参数的优化,建立了全二维气相色谱-飞行时间质谱(GC×GC-TOF MS)分析重馏分油中芳烃组分的方法,得到了重馏分油芳烃组分按环数分布的二维点阵图。根据谱库检索、标准化合物对照及文献报道,对重馏分油芳烃组分中菲、甲基菲及芘、苯并蒽等常见多环芳烃(PAH)进行了准确定性,并将该方法应用到重馏分油加氢处理工艺研究中,对菲、芘的加氢处理产物进行了定性分析。该研究为重馏分油芳烃组分的准确定性提供了新的技术手段,为加深对油品加氢规律的认识提供了技术支持。全二维气相色谱与普通一维色谱对比,在重馏分油的芳烃组分分析上体现了极大优势。