Preparation and polymerization of some vinyl ester amides of pinic acid

The preparation of vinyl 2,2-dimethyl-3-morpholinocarbonylcyclobutaneacetate, vinyl 2,2-dimethyl-3-piperidinocarbonylcyclobutaneacetate, and vinyl 2,2-dimethyl-3-di-n-butylaminocarbonylcyclobutaneacetate has been achieved by selective amination followed by vinyl interchange. Homopolymers and vinyl chloride copolymers containing 25 and 30 wt.-% of the vinyl esteramides were prepared and evaluated as nonrigid plastics. The vinyl esteramides incorporated in vinyl chloride copolymers did impart some plasticization, but their effect was far below the effect of added plasticizer to a vinyl chloride polymer.     

松香树脂酸乙烯酯的研究 第二报:松香树脂酸乙烯酯组成与结构的研究

本文研究了国产特级松香树脂酸乙烯酯的组成与各级分的分子结构：结果表明国产特级松香树脂酸乙烯酯的主要成分是枞酸乙烯酯、长叶松酸乙烯酯和去氢枞酸乙烯酯，三者间重量比为11：3：2；其连接在羧基上的乙烯基在核磁共振谱图中呈现为很好的ABX系统。     

Polymers from 12-hydroxymethyltetrahydroabietic acid and its vinyl and acrylate esters

12-Hydroxymethyltetrahydroabietic acid has been homopolymerized by melt condensation and homopolyester has been obtained. Vinyl 12-hydroxymethyltetrahydroabietate has been prepared from 12-hydroxymethyltetrahydroabietic acid by vinyl interchange procedure with vinyl acetate, and has been homopolymerized, copolymerized with vinyl chloride, vinyl acetate, and terpolymerized with styrene and acrylonitrile. The acrylate ester of 12-hydroxymethyltetrahydroabietic acid also has been prepared from 12-hydroxymethyltetrahydroabietic acid and acrylyl chloride. The acrylate thus obtained has been homopolymerized and copolymerized with vinyl chloride and vinyl acetate. Polymers thus obtained have been characterized.     

NMR study of model compounds of vinyl polymers

Complicated NMR spectra of vinyl polymers provide conformational and configurational knowledge of the polymers in solution. Explicit expressions for the spectral frequencies and intensities are obtained by the analysis of vinyl polymers and their model compounds as weakly coupled systems. The classified spectra expected for common vinyl polymers are presented by using the results of the analysis. The analysis is applied to model compounds of poly(vinyl alcohol) and poly(vinyl acetate) in solution. The results show that conformations of poly(vinyl alcohol) are determined by the intramolecular hydrogen bonding so that the syndiotactic isomer forms a helical structure, the isotactic one a planar zigzag structure. The poly(vinyl acetate) produces a helical structure for isotactic isomer by the repulsion of side chains and a planar zigzag for the syndiotactic isomer.     

Synthesis and photopolymerization of novel multifunctional vinyl esters

Novel mono‐ and multifunctional vinyl ester monomers containing thioether groups were synthesized via an amine‐catalyzed Michael addition reaction between vinyl acrylate and multifunctional thiols. Using photo‐differential scanning calorimetry and real‐time Fourier transform infrared (RTIR) spectroscopy, the polymerization kinetics and oxygen inhibition of the homopolymerizations of the vinyl ester monomers were investigated. The effect of the vinyl ester and thioether group on acrylate/vinyl ester and thiol/vinyl ester copolymerizations was determined using real‐time IR spectroscopy to monitor polymerization rates of acrylate, vinyl, and thiol groups simultaneously. Polymerization of the vinyl esters used was found to be relatively insensitive to oxygen inhibition. We propose that the thioether group is responsible for reducing oxygen inhibition by a series of chain transfer/oxygen‐scavenging reactions. In polymerization of a acrylate/vinyl ester mixture both in nitrogen and in air, the vinyl ester monomer significantly enhances the polymerization rates and the conversion of the acrylate double bonds via plasticization of the crosslinked matrix and reduction of inhibition by oxygen. Ultimately, the vinyl ester monomer is incorporated into the polymer network. Thiol/vinyl ester free‐radical copolymerization is much faster than either thiol/allylether copolymerization or vinyl ester homopolymerization. The electron‐rich vinyl ester double bonds ensure rapid copolymerization with thiol. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4424–4436, 2004     

Preparation of block copolymers from occluded vinyl acetate macroradicals

Stable vinyl acetate macroradicals were produced by polymerization in a nonviscous poor solvent, a viscous good solvent and a viscous poor solvent. These macroradicals were then allowed to react with a second vinyl monomer to produce block copolymers. The formation of block copolymers was monitored for rate and yield data. The block copolymers produced were poly(vinyl acetate-b-methyl methacrylate), poly(vinyl acetate-b-acrylic acid), poly(vinyl acetate-b-vinylpyrrolidone), poly(vinyl acetate-b-acrylonitrile), poly(vinyl acetate-b-styrene), and poly(vinyl acetate-b-methyl acrylate). The block copolymers were characterized by yield, precipitation in selected solvents, pyrolysis gas chromatography, and differential scanning calorimetry.     

歧化松香树脂酸乙烯酯组成与结构的研究

本文研究了国产歧化松香乙烯酯的组成与各组分的分子结构，结果表明国产歧化松香乙烯酯的主要成分是二氢枞酸和脱氮枞酸的乙烯酯，二者重量比为3∶4；其乙烯酯上的乙烯基在核磁共振谱图中呈现为很好的ABX系统；因为二氢枞酸有三个异构体，所以仅用光谱方法无法确定二氧枞酸乙烯酯环内双键的位置。     

(Meth)acrylate vinyl ester hybrid polymerizations

In this study, vinyl ester monomers were synthesized by an amine catalyzed Michael addition reaction between a multifunctional thiol and the acrylate double bond of vinyl acrylate. The copolymerization behavior of both methacrylate/vinyl ester and acrylate/vinyl ester systems was studied with near‐infrared spectroscopy. In acrylate/vinyl ester systems, the acrylate groups polymerize faster than the vinyl ester groups resulting in an overall conversion of 80% for acrylate double bonds in the acrylate/vinyl ester system relative to only 50% in the bulk acrylate system. In the methacrylate/vinyl ester systems, the difference in reactivity is even more pronounced resulting in two distinguishable polymerization regimes, one dominated by methacrylate polymerization and a second dominated by vinyl ester polymerization. A faster polymerization rate and higher overall conversion of the methacrylate double bonds is thus achieved relative to polymerization of the pure methacrylate system. The methacrylate conversion in the methacrylate/vinyl ester system is near 100% compared to only ～60% in the pure methacrylate system. Utilizing hydrophilic vinyl ester and hydrophobic methacrylate monomers, polymerization‐induced phase separation is observed. The phase separated domain size is in the order of ～1 μm under the polymerization conditions. The phase separated domains become larger and more distinct with slower polymerization and correspondingly increased time for diffusion. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2509–2517, 2009     

The vinyl + NO reaction: determining the products with time-resolved Fourier transform spectroscopy

We have studied the vinyl + NO reaction using time-resolved Fourier transform emission spectroscopy, complemented by electronic structure and microcanonical RRKM rate coefficient calculations. To unambiguously determine the reaction products, three precursors are used to produce the vinyl radical by laser photolysis: vinyl bromide, methyl vinyl ketone, and vinyl iodide. The emission spectra and theoretical calculations indicate that HCN + CH2O is the only significant product channel for the C2H3 + NO reaction near room temperature, in contradiction to several reports in the literature. Although CO emission is observed when vinyl bromide is used as the precursor, it arises from the reaction of NO with photofragments other than vinyl. This conclusion is supported by the absence of CO emission when vinyl iodide or methyl vinyl ketone is used. Prompt emission from vibrationally excited NO is evidence of the competition between back dissociation and isomerization of the initially formed nitrosoethylene adduct, consistent with previous work on the pressure dependence of this reaction. Our calculations indicate that production of products is dominated by the low energy portion of the energy distribution. The calculation also predicts an upper bound of 0.19% for the branching ratio of the H2CNH + CO channel, which is consistent with our experimental results.     

Homopolymers and copolymers of vinyl ethers of rosin-derived alcohols

Two vinyl ethers of rosin-derived alcohols were homopolymerized with free-radical and cationic initiators. A polymer was obtained from the vinyl ether of the alcohol from Foral in good conversion by free-radical initiators but it was not a high molecular weight product. Cationic initiators were more effective; boron trifluoride etherate proved to be best. All of the homopolymers were obtained as white powders with high crystallinity. Copolymerizations of the vinyl ethers and vinyl chloride have been studied with the use of free-radical initiators. Cationic-initiated copolymers of the vinyl ethers and isobutyl vinyl ether were studied. Those containing less than 20% of the rosin vinyl ethers were rubbery, of high molecular weight, and could be crosslinked with peroxide.     

Reaction of poly(vinyl chloride) with magnesium and grignard reagents

Reaction of poly(vinyl chloride) with magnesium under various conditions was attempted, but poly(vinyl chloride) did not react with magnesium. The reactions of poly(vinyl chloride) with benzylmagnesium chloride and allylmagnesium chloride as Grignard reagents were carried out in tetrahydrofuran at reflux temperature. It was found that the chlorine atoms in the poly(vinyl chloride) were replaced by benzyl and allyl groups by the coupling reaction, and a small amount of Grignard reagent of poly(vinyl chloride) was formed by the magnesium–halogen exchange reaction. The extent of the substitution increased with increasing reaction time and concentration of the Grignard reagent.     

Properties of Crystalline Polyvinylenes Prepared by Phase-Transfer Dehydrochlorination of Vinyl Chloride Copolymers

Crystalline polyvinylenes were prepared by phase-transfer dehydrochlorination of binary copolymer of vinyl chloride with vinyl acetate (9 : 1 molar ratio) and ternary copolymer with vinyl acetate and vinyl alcohol (27 : 1 : 2 molar ratio), and the chemical and electrical properties of these substances and of products of their thermolysis were studied.     

Vinyl aryl ethers from copper-catalyzed coupling of vinyl halides and phenols

A general procedure for vinyl aryl ether bond formation by direct coupling of vinyl halides and phenols under mild Ullmann-type reaction conditions has been developed. Using copper chloride as the catalyst and cesium carbonate as the base, vinyl bromides or iodides were reacted with phenols in refluxing toluene to produce vinyl aryl ethers in good to excellent yields.     

Novel method for preparation of photocrosslinkable poly(vinyl alcohol)

A convenient procedure to prepare photosensitive poly(vinyl alcohol) by acetalization with 1-methyl-4-(p-formylstyryl)pyridinium methosulfate in heterogeneous condition is described. The reaction of fully saponified poly(vinyl alcohol) was carried out in suspension in acidic aqueous solution, while partially saponified poly(vinyl alcohol) was acetalized in acidic aqueous organic solvent. The photosensitive poly(vinyl alcohol) thus prepared was purified by filtration and successive washing out with methanol. The effect of the preparative condition on the electronic absorption spectra of the styrylpyridinium group attached to poly(vinyl alcohol) is discussed.     

Polymers from 12 α-hydroxymethylabiet-7,8-enoic acid and vinyl 12 α-hydroxymethylabiet-7,8-enoate

12 α-Hydroxymethylabiet-7,8-enoic acid has been homopolymerized by melt condensation, and a partially crystalline polyester has been obtained. Vinyl 12 α-hydroxymethylabiet-7,8-enoate has been prepared from 12 α-hydroxymethylabiet-7,8-enoic acid by vinyl interchange with vinyl acetate and has been homopolymerized, copolymerized with vinyl chloride, vinyl acetate, butadiene, and acrylonitrile, and terpolymerized with styrene and acrylonitrile. Polymers thus obtained have been characterized.     

高选择性透过二氧化硫气体分离膜的研究 （Ⅳ）不同烃基乙烯基亚砜接枝聚乙烯醇膜的透过性能

研究了不同烃基乙烯基亚砜接枝聚乙烯醇（ＰＶＡ－ＲＶＳＯ，Ｒ＝Ｍｅ，Ｅｔ，ｔ－Ｂｕ，Ｐｈ）膜对纯ＳＯ２、Ｎ２的透过性能以及ＳＯ２／Ｎ２混合气体的分离性能．结果表明上述膜对ＳＯ２具有高的选择性．对不同烃基乙烯基亚砜接枝膜进行了比较．     

Thermal and radiation-induced dehydrochlorination of poly(vinyl chloride). II. Head-to-head structures

The mechanism of dehydrochlorination of 2,3-dichlorobutane and chlorinated polybutadiene which are model compounds of head-to-head poly(vinyl chloride) has been investigated by pyrolysis, thermal, and ultraviolet-induced decomposition. The activation energy of dehydrochlorination for head-to-head poly(vinyl chloride) in nitrogen was 23 kcal/mole at temperatures of 150–190°C, which is slightly smaller than that (29 kcal/mole) for head-to-tail poly(vinyl chloride). The conjugated double bonds were formed by thermal and radiation decomposition of head-to-head poly(vinyl chloride), similar to head-to-tail poly(vinyl chloride). The probability of polyene formation by radiation-induced dehydrochlorination is larger than that by thermal decomposition and is affected by the conformation and the molecular motion of the main chain. This may be due to the alternative mechanism of dehydrochlorination in the thermal and radiation decomposition. The amount of head-to-head linkage of poly(vinyl chloride) samples prepared with various catalysts is dependent on polymerization temperature rather than the kinds of catalyst. Commercial poly(vinyl chloride) has 6–7 head-to-head linkages per 1000 monomeric units.     

Zur Katalyse der Umvinylierungen

It is shown that the vinyl interchange reaction between vinyl acetate and carboxylic acids proceeds by an acid catalysed addition of mercuric acetate to the vinyl double bond; the corresponding organomercuric intermediate has been isolated and identified.     

POLYSTYRENE PARTICLES WITH SURFACE AMINO GROUPS

Poly[(vinyl alcohol)-co-(vinyl amine)] was prepared by copolymerization of vinyl acetate and N-vinyl forma-mide, followed by a two-step alkaline hydrolysis in which the vinyl acetate groups were hydrolyzed to vinyl alcohol groups, and the N-vinyl formamide groups, to amino groups. This copolymer was used as the stabilizer for the emulsion polymerization of styrene using persul-fate-ion initiator. The latexes were cationic; the particles were relatively uniform and of 100–500 nm diameter. The presence of amino groups was shown by electro-phoresis and Kjeldahl analysis. Comparison with sodium lauryl sulfate showed that the mechanism of particle nucleation was apparently entry of radicals into fine emulsion droplets rather than the conventional entry of radicals into emulsifier micelles.     

Polymers of the vinyl esters of perchlorocyclopentadiene adducts of petroselinic and oleic acids

Homopolymers of vinyl 5-(1,4,5,6,7,7-hexachloro-3-undecylbicyclo [2.2.1]5-hepten-2-yl)-pentanoate and vinyl 8-(1,4,5,6,7,7-hexachloro-3-octylbicyclo [2.2.1]5-hepten-2-yl)-octanoate were prepared, as well as their copolymers with a vinyl tetrahydroabietate—tetrahydropimarate mixture, vinyl 12-hydroxystearate, and vinyl chloride. The vinyl octanoate—12-hydroxystearate copolymer gave light-weight urethane foams with practically no volume change upon humid aging. The vinyl pentanoate and vinyl octanoate monomers lose hydrogen chloride during polymerization. The vinyl pentanoate homopolymer was hydrolyzed in an attempt to establish the position of the loss of hydrogen chloride. Fractionation of vinyl chloride copolymers of the vinyl petanoate and the vinyl octanoate derivatives showed that they possessed a rather homogeneous composition. Incorporation of the vinyl pentanoate monomer in a poly(vinyl chloride) copolymer imparted some internal plasticization with serious loss of tensile strength.