Rapid detection of melamine with 4-mercaptopyridine-modified gold nanoparticles by surface-enhanced Raman scattering

A surface-enhanced Raman scattering (SERS) strategy based on 4-mercaptopyridine (MPY)-modified gold nanoparticles (AuNPs) was developed for the rapid and sensitive detection of melamine in milk powder. The SERS measurement of melamine strongly relied on the “hotspot” effect, in which AuNPs immediately aggregated upon the addition of melamine, leading to significantly enhanced Raman intensity of the reporter molecule MPY and a color change for the solution from red to blue-gray. The limit of detection based on a signal to noise of 3 (S/N = 3) was found to be as low as 0.1 ppb of melamine, with an excellent linearity of 0.5–100 ppb, demonstrating a higher sensitivity and a wider quantitation range than direct SERS sensing methods based on enhanced substrate. An impressive specificity for melamine detection over various common metal ions and excipients in dairy products, even at concentrations of 100-fold higher than melamine, was achieved. Good recoveries of 88.5% and 111.7% were obtained from milk samples spiked to 20 and 100 ppb levels, respectively. The proposed method is potentially applicable for the rapid in situ determination of melamine in complex matrices.     

High-yield synthesis of multi-branched gold nanoparticles and their surface-enhanced Raman scattering properties

Multi-branched gold nanoparticles were synthesized in high-yield through the reduction of HAuCl(4) by using hydrazine as a reducing agent. Practically 100% of the particles have numerous branches. The high reduction capability of hydrazine is found to be crucial for the formation of these branched gold nanoparticles. Their size can be controlled from 20 to 130 nm by varying the amounts of hydrazine. The prepared nanoparticles exhibit efficient surface-enhanced Raman scattering (SERS) properties and the SERS activity of the particles depends on the aspect ratio of their branches, which are most likely related to a great increase in the localized electromagnetic field enhancement from their unique sharp surface features arising from the branches.     

Essential nanogap effects on surface-enhanced Raman scattering signals from closely spaced gold nanoparticles

We have demonstrated the essential nanogap effects on surface-enhanced Raman scattering (SERS) signals obtained from two diagonally aligned gold nanoparticles with several nanometre separations, which were precisely fabricated on a glass substrate. This is the first proof of principle for extracting the light localization effects on SERS due to the formation of nanogaps from experimentally observed SERS signals.     

Surfactantless photochemical deposition of gold nanoparticles on an optical fiber core for surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) probes based on gold nanoparticles modifying the core of the optical fiber were made by a surfactantless photochemical deposition method. The growth kinetics and shape evolution of gold nanoparticles depending on different experimental conditions were studied. It was found that, under the condition of detectable gold nanoparticle deposition, increasing the concentration of chloroauric acid (HAuCl(4)) was not conducive to the deposition whereas increasing the concentration of sodium citrate (Na(3)Ct) would speed up the deposition. By controlling the concentration of the reaction solution and irradiation time, we obtained fused spherical-like, spherical, and flowerlike gold nanoparticles. To test the SERS activity of the probes, the SERS spectra of a rhodamine 6G aqueous solution were recorded in direct detection mode and remote mode. We have also developed a new approach to improving the SERS sensitivity when detecting in remote mode.     

Labeled gold nanoparticles immobilized at smooth metallic substrates: systematic investigation of surface plasmon resonance and surface-enhanced Raman scattering

This paper experimentally and theoretically investigates the influence of an underlying metallic substrate (i.e., gold and silver) on the surface plasmon resonance (SPR) of labeled gold nanoparticles and the concomitant impact on the surface-enhanced Raman scattering (SERS) signal from the labels. These experiments employ nanoparticles of varied sizes (30-100 nm) that are coated with a bifunctional Raman scatterer composed of (1) a disulfide for chemisorption to the nanoparticle surface, (2) a succinimidyl ester for formation of a covalent linkage to an amine-terminated self-assembled monolayer on the underlying substrate, and (3) an aryl nitro group with an intrinsically strong Raman active vibrational mode. This approach allows facile systematic assessments of how variations in nanoparticle size, substrate composition, and the gap between the nanoparticle and substrate affect the SPR of the bound particles. Both UV-vis transmission and reflection absorption (incident angle of 58 degrees ) spectroscopy are used to characterize the effect of each of these parameters on SPR. These results are then correlated with SERS enhancement factors (EFs) that were determined by accounting for particle surface concentrations, which were measured by atomic force microscopy, and the absolute number of labels, which were calculated on the basis of the surface area of each of the different-sized particles. All SERS spectra were collected at an incident angle of 58 degrees with respect to the surface normal. As expected, the SPR for particles in solution red-shifts with increasing particle size. More importantly, the SPR moves to even longer wavelengths as the size of immobilized particles increases and as the gap between the immobilized particle and substrate decreases. The red shift is also greater for a gold nanoparticle tethered to a gold substrate compared to a silver substrate. A theoretical model for the extinction of a particle above a flat substrate, corrected for surface scattering, radiation damping, and dynamic depolarization, is also briefly detailed. SPR results calculated with the model are consistent with the shifts observed in the SPR position for each of the manipulated experimental variables. The largest EFs are found for samples with an SPR maximum (lambda(max)) between the wavelengths for laser excitation (633 nm) and the Raman band for the symmetric nitro stretch of the particle coating (690 nm). As an example, an order of magnitude in the SERS enhancement factor is gained for a 60-nm particle immobilized 1.2 nm above a gold substrate (SPR lambda(max) = 657 nm) compared to that for a 30-nm particle (SPR lambda(max) = 596 nm).     

Positively charged silver nanoparticles and their effect on surface-enhanced Raman scattering of dye-labelled oligonucleotides

Improved positively charged nanoparticles are described to provide a simplified SERS substrate for DNA detection. Complete flocculation of the nanoparticles is prevented due to the controlled analyte induced aggregation. This provides a stable aggregation state which significantly extends the analysis window simplifying DNA detection by SERS.     

Templated assembly of gold nanoparticles into microscale tubules and their application in surface-enhanced Raman scattering

We report a simple procedure to assemble gold nanoparticles into hollow tubular morphology with micrometer scale, wherein the citrate molecule is used not only as a reducing and capping agent, but also as an assembling template. The nanostructure and growth mechanism of microtubes are explored via SEM, TEM, FTIR spectra, and UV-vis spectra studies. The incorporation of larger gold nanoparticles by electroless plating results in an increase in the diameter of microtubes from 900 nm to about 1.2 microm. The application of the microtubes before and after electroless plating in surface-enhanced Raman scattering (SERS) is investigated by using 4-aminothiophenol (4-ATP) as probe molecules. The results indicate that the microtubes both before and after electroless plating can be used as SERS substrates. The microtubes after electroless plating exhibit excellent enhancement ability.     

Controllable synthesis of water-soluble gold nanoparticles and their applications in electrocatalysis and surface-enhanced Raman scattering

We report a facile method to synthesize water-soluble gold nanoparticles (AuNPs) using a biosurfactant sodium cholate as reducing reagents and protective groups in aqueous solution at ambient temperature. The diameters (13-70 nm) of uniform AuNPs can be readily adjusted by changing the initial molar ratio of sodium cholate to chloroauric acid (HAuCl(4)). Also, the alkaline condition of preparative solution is found to affect the size of as-synthesized AuNPs. This synthetic approach is one-step and "green". The obtained AuNPs exhibit a good electrocatalytic activity toward methanol oxidation. Meanwhile, the AuNPs thin films can serve as an efficient substrate for surface-enhanced Raman scattering (SERS). Furthermore, platinum nanoparticles (PtNPs) are also prepared by reducing sodium tetrachloro platinate hydrate with sodium cholate.     

A colorimetric and surface-enhanced Raman scattering dual-signal sensor for Hg based on Bismuthiol II-capped gold nanoparticles

The addition of Bismuthiol II to the gold nanoparticles (AuNPs) solution led to the aggregation of AuNPs with a color change from red to blue. As a result, hot spots were formed and strong surface-enhanced Raman scattering (SERS) signal of Bismuthiol II was observed. However, the Bismuthiol II-induced aggregation of AuNPs could be reversed by Hg²⁺ in the system, accompanied by a remarkable color change from blue to red. As evidenced by UV–vis and SERS spectroscopy, the variation in absorption band and SERS intensity was strongly dependent on the concentration of Hg²⁺, suggesting a colorimetric and SERS dual-signal sensor for Hg²⁺. The sensor had a high sensitivity, low detection limits of 2 nM and 30 nM could be achieved by UV–vis spectroscopy and by SERS spectroscopy, respectively. Other environmentally relevant metal ions did not interfere with the detection of Hg²⁺. The method was successfully applied to detect Hg²⁺ in water samples. It was simple, rapid and cost-effective without any modifying or labeling procedure.     

Fabrication of flower-like silver nanoparticles for surface-enhanced Raman scattering

The flower-like silver nanoparticles have been synthesized by reducing silver nitrate (AgNO₃) with ascorbic acid (AA) as the reductant and polyvinyl pyrrolidone (PVP) as the capping agent under vigorous stirring. Such flower-like nanoparticles are aggregates of small nanoplates and nanorods. They were tested as substrates for the surface-enhanced Raman scattering (SERS), showing high sensitivity for detecting Rhodamine 6G (R6G) at a concentration as low as 10^-7 mol/L. It has been found that replacing mechanical stirring with ultrasound sonication would drastically change the particle morphology, from flower-like nanoparticles to well-dispersed smaller nanoparticles. Furthermore, when trace amounts of NaCl were added into the reagents, well-dispersed Ag nanoparticles formed even in vigorous stirring. These phenomena can be explained with the diffusion and reactant supply during nucleation and growth of Ag nanoparticles.     

Functionalized gold nanoparticles as nanosensor for sensitive and selective detection of silver ions and silver nanoparticles by surface-enhanced Raman scattering

We have developed a surface-enhanced Raman scattering (SERS) nanosensor firstly for Ag ions and Ag nanoparticles detection based on 2-mercaptoisonicotinic acid (2MNA)-functionalized Au nanoparticles. Ag(+) can coordinate with 2MNA resutling in a variation of its SERS spectrum, which is used as a criterion to determine Ag(+) in a solution. This sensor exhibits a detection limit no more than 25 nM and has a high selectivity against other metal ions. More importantly, it can be directly applied in real sample detection.     

Phospholipid membrane encapsulation of nanoparticles for surface-enhanced Raman scattering

Lipid-encapsulated surface-enhanced Raman scattering (SERS) nanoparticles, with promising applications in biomedical diagnostics, were produced. Gold nanoparticles, 60 nm in diameter, were coated with a ternary mixture of DOPC, sphingomyelin, and cholesterol. The lipid layer is versatile for engineering the chemical and optical properties of the particles. The stability of the lipid-encapsulated particles is demonstrated over a period of weeks. The versatility of the layer is demonstrated by the incorporation of three different Raman-active species using three different strategies. The lipid layer was directly observed by TEM, and the SERS spectrum of the three dye species was confirmed by Raman spectroscopy. UV-vis absorption and dynamic light scattering provide additional evidence of lipid encapsulation. The encapsulation is achieved in aqueous solution, avoiding phase transfer and possible contamination from organic solvents. Furthermore, when fluorescent dye-labeled lipids were employed in the encapsulant, the fluorescence and SERS activity of the particles were controlled by the use of dissolved ions in the preparation solution.     

Silica-void-gold nanoparticles: temporally stable surface-enhanced Raman scattering substrates

Reproducible detection of a target molecule is demonstrated using temporally stable solution-phase silica-void-gold nanoparticles and surface-enhanced Raman scattering (SERS). These composite nanostructures are homogeneous (diameter = 45 +/- 4 nm) and entrap single 13 nm gold nanoparticle cores inside porous silica membranes which prevent electromagnetic coupling and aggregation between adjacent nanoparticles. The optical properties of the gold nanoparticle cores and structural changes of the composite nanostructures are characterized using extinction spectroscopy and transmission electron microscopy, respectively, and both techniques are used to monitor the formation of the silica membrane. The resulting nanostructures exhibit temporally stable optical properties in the presence of salt and 2-naphthalenethiol. Similar SERS spectral features are observed when 2-naphthalenethiol is incubated with both bare and membrane-encapsulated gold nanoparticles. Disappearance of the S-H Raman vibrational band centered at 2566 cm(-1) with the composite nanoparticles indicates that the target molecule is binding directly to the metal surface. Furthermore, these nanostructures exhibit reproducible SERS signals for at least a 2 h period. This first demonstration of utilizing solution-phase silica-void-gold nanoparticles as reproducible SERS substrates will allow for future fundamental studies in understanding the mechanisms of SERS using solution-phase nanostructures as well as for applications that involve the direct and reproducible detection of biological and environmental molecules.     

Approaching the electromagnetic mechanism of surface-enhanced Raman scattering: from self-assembled arrays to individual gold nanoparticles

Surface-enhanced Raman scattering (SERS) has been intensively explored both in theory and applications and has been widely used in chemistry, physics and biology for decades. A variety of SERS substrates have been developed in order to investigate the mechanisms behind, which give rise to the enormous enhancement even enabling single molecule detection. The Raman enhancement, which involves an electromagnetic enhancement (EM) and a chemical enhancement (CM), reflects both the physical principle of light/metal interactions and the molecule/metal interactions. In this tutorial review, we focus on the EM enhancement of SERS active substrates made of colloidal gold nanoparticles (GNPs), varying from self-assembled arrays down to single particles, for the purpose of investigating the EM coupling effect and probing the distribution of the induced electric field of single GNPs.     

Uniform arrays of gold nanoparticles with different surface roughness for surface enhanced Raman scattering

Uniform arrays of coarse and smooth gold nanoparticles with diameter about 130 nm were successfully synthesized through seed-mediated growth method, separately. Scanning and transmission electron microscopy (SEM and TEM) and X-ray diffraction (XRD) have been used to study the formation and structure of the nanocomposites. The high enhancement factor for surface-enhanced Raman scattering of coarse and smooth gold nanoparticles were estimated to be about 3.1 × 10⁶ and 2.0 × 10⁶, respectively. It is evident that the coarse gold nanostructures has higher influence factor than the smooth gold nanostructures. Therefore, these unique properties of the coarse Au nanoparticles appear to be very promising for applications as high-performance SERS substrates.     

Wide range temperature detection with hybrid nanoparticles traced by surface-enhanced Raman scattering

We report on the fabrication of a class of surface-enhanced Raman scattering(SERS)active thermometers,which consists of60 nm gold nanoparticles,encoded with Raman-active dyes,and a layer of thermoresponsive poly(N-isopropylacrylamide)(PNIPAM)brush with different chain lengths.These SERS-active nanoparticles can be optimized to maintain spectrally silent when staying as single particles in dispersion.Increasing temperature in a wide range from 25 to 55°C can reversibly induce the interparticle self-aggregation and turn on the SERS fingerprint signals with up to 58-fold of enhancement by taking advantage of the interparticle plasmonic coupling generated in the process of thermo-induced nanoparticles self-aggregation.Moreover,the most significative point is that these SERS probes could maintain their response to temperature and present all fingerprint signals in the presence of a colored complex.However,the UV-Vis spectra can distinguish the differences faintly and the solution color shows little change in such complex mixture.This proof-of-concept and Raman technique applied here allow for dynamic SERS platform for onsite temperature detection in a wide temperature range and offer unique advantages over other detection schemes.     

Role of nanoparticle surface charge in surface-enhanced Raman scattering

In this work, the role of nanoparticle surface charge in surface-enhanced Raman scattering (SERS) is examined for the common case of measurements made in colloidal solutions of Ag and Au. Average SERS intensities obtained for several analytes (salicylic acid, pyridine, and 2-naphthalenethiol) on Ag and Au colloids are correlated with the pH and zeta potential (zeta) values of the nanoparticle solutions from which they were recorded. The consequence of the electrostatic interaction between the analyte and the metallic nanoparticle is stressed. The zeta potentials of three commonly used colloidal solutions are reported as a function of pH, and a discussion is given on how these influence SERS intensity. Also examined is the importance of nanoparticle aggregation (and colloidal solution collapse) in determining SERS intensities, and how this varies with the pH of the solution. The results show that SERS enhancement is highest at zeta potential values where the colloidal nanoparticle solutions are most stable and where the electrostatic repulsion between the particles and the analyte molecules is minimized. These results suggest some important criteria for consideration in all SERS measurements and also provide important insights into the problem of predicting SERS activities for different molecular systems.     

Nanostructured Ag surface fabricated by femtosecond laser for surface-enhanced Raman scattering

Femtosecond laser was employed to fabricate nanostructured Ag surface for surface-enhanced Raman scattering (SERS) application. The prepared nanostructured Ag surface was characterized by field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The FESEM images demonstrate the formation of nanostructure-covered femtosecond laser-induced periodic surface structure, also termed as ripples, on the Ag surface. The AFM images indicate that the surface roughness of the produced nanostructured Ag substrate is larger than the untreated Ag substrate. The XRD and XPS of the nanostructured Ag surface fabricated by femtosecond laser show a face centered cubic phase of metallic Ag and no impurities of Ag oxide species. The application of the produced nanostructured Ag surface in SERS was investigated by using rhodamine 6G (R6G) as a reference chemical. The SERS intensity of R6G in aqueous solution at the prepared nanostructured Ag surface is 15 times greater than that of an untreated Ag substrate. The Raman intensities vary linearly with the concentrations of R6G in the range of 10(-8)-10(-4)M. The present methodology demonstrates that the nanostructured Ag surface fabricated by femtosecond laser is potential for qualification and quantification of low concentration molecules.     

Direct evidence of chemical effect of surface-enhanced Raman scattering observed on electrochemically prepared rough gold substrates

In this study, polypyrrole (PPy) films were electrochemically deposited on gold substrates roughened by an electrochemical triangular-wave oxidation-reduction cycles (ORC) in an aqueous solution containing 0.1N KCl. Then the substrates were heated from 25 to 50 °C and the corresponding SERS performances of PPy were observed in situ. The results indicate that the SERS enhancement capabilities of substrates are gradually raised from 25 °C to a maximum at 40 °C and monotonically decreased from 40 to 50 °C. These SERS enhancement capabilities ascribed to the charge transfers from PPy to Au, which are responsible for the chemical effects of SERS mechanisms, are successfully observed via SERS and high resolution X-ray photoelectron spectroscopy (HRXPS) analyses. The variation in content of the oxidized PPy peak of the double peaks in the range of 1000-1150 cm⁻¹ in SERS spectrum obtained on an Au substrate at different temperatures is consistent with its corresponding variation in the SERS intensity of PPy. The variation in content of the oxidized nitrogen of PPy deposited on an Au substrate at different temperatures revealed from an HRXPS analysis also confirms this consistence.     

Adsorption of -histidine on copper surface as evidenced by surface-enhanced Raman scattering spectroscopy

The adsorption of -histidine on a copper electrode from H₂O- and D₂O-based solutions is studied by means of surface-enhanced Raman scattering (SERS) spectroscopy. Different adsorption states of histidine are observed depending upon pH, potential, and the presence of the SO²⁻₄ and Cl⁻ ions. In acidic solutions of pH 1.2 the imidazole ring of the adsorbed histidine remains protonated and is not involved in the chemical coordination with the surface. The SO²⁻₄ and Cl⁻ ions compete with histidine for the adsorption sites. In solutions of pH 3.1 three different adsorption states of histidine are observed depending on the potential. Histidine adsorbs with the protonated imidazole ring oriented mainly perpendicularly to the surface at potentials more positive than −0.2 V. Transformation of that adsorption state occurs at more negative potentials. As this takes place, histidine adsorbs through the α-NH₂ group and the neutral imidazole ring. The Cl⁻ ions cause the protonation and detachment of the α-NH₂ group from the surface and the formation of the ion pair NH⁺₃ … Cl⁻ can be observed. In the neutral solution of pH 7.0 histidine adsorbs through the deprotonated nitrogen atom of the imidazole ring and the α-COO⁻ group at E ≥ −0.2 V. However, this adsorption state is transformed into the adsorption state in which the α-NH₂ group and/or neutral imidazole ring participate in the anchoring of histidine to the surface, once the potential becomes more negative. In alkaline solutions of pH 11.9 histidine is adsorbed on the copper surface through the neutral imidazole ring.