Linear optical switching in a FLC/waveguide composite device

A fast electrooptic modulation in a polymer waveguide using a ferroelectric liquid crystal has been proposed. In this device, the surface stabilized ferroelectric liquid crystal and the soft mode ferroelectric liquid crystal are used as an active material on the passive polymer waveguide, and electrooptic switching is realized by controlling the total reflection at the polymer waveguide-liquid crystal interface. The response time is of the order of several microseconds. The analogue electrooptic modulation in the waveguide is realized using the field induced linear molecular tilt of the electroclinic effect in the soft mode ferroelectric liquid crystal.     

Linear optical switching in a FLC/waveguide composite device

Abstract

A fast electrooptic modulation in a polymer waveguide using a ferroelectric liquid crystal has been proposed. In this device, the surface stabilized ferroelectric liquid crystal and the soft mode ferroelectric liquid crystal are used as an active material on the passive polymer waveguide, and electrooptic switching is realized by controlling the total reflection at the polymer waveguide-liquid crystal interface. The response time is of the order of several microseconds. The analogue electrooptic modulation in the waveguide is realized using the field induced linear molecular tilt of the electroclinic effect in the soft mode ferroelectric liquid crystal.     

The influence of flow on symmetric and asymmetric splay state relaxations

We present a detailed discussion of the relaxation of splayed states in untwisted devices — the asymmetric H state (Ha), and the recently observed symmetric H state (Hs). Experimental evidence suggests that the Hs does not experience the optical bounce due to induced backflow usually associated with splay state relaxation. A dynamic model using Leslie-Eriksen-Parodi theory has been developed, and is used to model the flow within the device during switching. We show that there is no backflow during Hs relaxation, and that the flow profile is similar to that present during relaxation of the V state (the state used for pi-cell operation). This flow enhances the switching of the Hs, leading to a faster relaxation than might be expected. The influence of the different viscosity parameters is examined in detail, and a comparison between the experimental and simulated results is given.     

Active control of terahertz radiation using a metamaterial loaded with a nematic liquid crystal

We experimentally demonstrate an effective method of manipulating terahertz radiation using a metamaterial loaded with a liquid crystal. Active control of the terahertz beam was performed by in-plane electrical switching of the nematic liquid crystal in the metamaterial device. By changing the magnitude of the AC bias voltage from 0 to 100 V, a reversible transmittance shift of up to 10% was achieved for an incident beam with horizontal electric field polarisation and 27% for vertical polarisation with frequency at around 0.7 THz. Metamaterials with electrically tunable characteristics have potential applications in transmission, modulation and switching components and devices for controlling the intensity and phase of terahertz radiation.     

Optical studies of dynamic director configurations in ferroelectric liquid crystal devices

An investigation into the transmission spectrum of a ferroelectric liquid crystal device is undertaken. This is done both for an initial static state and during a switching process. Comparisons are made between experimental data and theoretical predictions. The dynamic internal director configurations in the device is shown to be consistent with a simple model during both monopolar and bipolar addressing pulses.     

Optical studies of dynamic director configurations in ferroelectric liquid crystal devices

An investigation into the transmission spectrum of a ferroelectric liquid crystal device is undertaken. This is done both for an initial static state and during a switching process. Comparisons are made between experimental data and theoretical predictions. The dynamic internal director configurations in the device is shown to be consistent with a simple model during both monopolar and bipolar addressing pulses.     

Utility of a liquid crystalline diacrylate for bistable switching cholesteric gel displays

We investigated cholesteric liquid crystals containing an anisotropic polymer network created by in situ photo-polymerization of a mesogenic diacrylate. In contrast to previous studies, we used a liquid crystalline diacrylate to achieve bistable switching between the reflecting Grandjean texture and the diffuse scattering focal conic texture. The switching behavior depends considerably on the orientation of the liquid crystal during the polymerization. For polymerization in the Grandjean texture, the response times for switching to the reflecting state were lowered compared to the pure liquid crystal. The chromaticity coordinates indicate that this new type of display is very promising for additive color mixing.     

Polymer Membranes Dispersed Liquid Crystal (PMDLC): a new electro-optical device

Polymer Dispersed Liquid Crystals (PDLCs) are liquid crystal dispersions in a polymer matrix, which look like opaque in their OFF state, when no electric field is applied, and transparent in their ON state. They are generally obtained by a phase separation process, such as Thermal, Solvent- and Polymerization-Induced Phase Separation (TIPS, SIPS and PIPS, respectively), between two transparent conductive glass substrates. In this paper, a new electro-optical device, formed by a porous polymer membrane imbibed with liquid crystal by capillary suction, is presented (Polymer Membranes Dispersed Liquid Crystals, PMDLC). Polymer membrane surfaces were made conductive before liquid crystal loading by magnetron sputtering of a thin layer of conductive indium tin oxide. The morphology and the electro-optical response of these devices were investigated and the observed transmittances and relaxation times were found to be similar to those of conventional PDLCs. In addition, PMDLCs showed interesting flexibility as no solid conductive substrate is required and economic convenience as there is no loss of liquid crystal in the polymer matrix.     

Evidence for the non-uniform distribution of polymer networks formed in liquid crystal devices

The electro-optic properties of liquid crystal devices are modified by the presence of a polymer network formed by the exposure to UV light of reactive mesogen molecules dissolved within the liquid crystal host. The effect of the polymer network depends on its density, and knowledge of this through the liquid crystal layer is necessary to understand qualitatively, and to model quantitatively, the electro-optic properties of liquid crystal devices containing polymer networks. Various techniques have been used to study the distribution of the polymer network and these show an increased concentration of the network near the surface closest to the UV light. Evidence is presented that the polymer network distribution becomes more uniform when non-UV absorbing liquid crystals are used.     

Evidence for the non-uniform distribution of polymer networks formed in liquid crystal devices

The electro-optic properties of liquid crystal devices are modified by the presence of a polymer network formed by the exposure to UV light of reactive mesogen molecules dissolved within the liquid crystal host. The effect of the polymer network depends on its density, and knowledge of this through the liquid crystal layer is necessary to understand qualitatively, and to model quantitatively, the electro-optic properties of liquid crystal devices containing polymer networks. Various techniques have been used to study the distribution of the polymer network and these show an increased concentration of the network near the surface closest to the UV light. Evidence is presented that the polymer network distribution becomes more uniform when non-UV absorbing liquid crystals are used.     

Nano P(VDF-TrFE) doped polyimide alignment layers for twisted nematic liquid crystal devices

ABSTRACT

The rapid development of consumer electronics and portable devices imposes a great demand for energy efficient information display systems. Among the information display devices, liquid crystal display (LCD) devices stands in the front. The fabrication of energy-efficient LCD systems demands new material and techniques. In this work, the conventional polyimide alignment layer of twisted nematic liquid crystal device (TNLCD) was replaced with ferroelectric polymer nanoparticle doped alignment layer. Morphology of the alignment layer was analysed using field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). The ferroelectric nature of the polymer alignment layer was studied using dynamic contact electrostatic force microscopy (DC-EFM). TNLCD cells are fabricated with this modified alignment layer and the switching characteristics are compared with the conventional TNLCD devices. The TNLCD with modified alignment layer has shown a reduction of 50% in threshold (V_thr) and 47% reduction in saturation voltage (V_sat).     

Shear aligned polymer dispersed ferroelectric liquid crystal devices

Fast switching liquid crystal devices can be produced by forming a dispersion of ferroelectric liquid crystal droplets in a polymer film. Such PDFLCs have been fabricated using a polymerization-induced phase separation technique involving ultraviolet photopolymerization, during which the film was sheared to obtain a uniform orientation of the liquid crystal medium. These birefringence devices show fast response times (sub-millisecond), optimum tilt angle (22.5°), and good contrast (∼ 30:1) at room temperature, using ferroelectric switching. We studied the tilt angles, response times and contrast ratio as a function of voltage and temperature to determine the effects of the preparation parameters on the electro-optic behaviour of these devices. Using a ferroelectric liquid crystal with long helical pitch, such devices appear to be bistable.     

3D mapping of the output laser beam from a PDLC sample

Self-transparency due to thermal non-linearities is presented as a basic switching effect in a thick polymer dispersed liquid crystal sample. For the first time a detailed 3D mapping of the output laser beam as a function of the x-y coordinates is presented: changes of the transmitted beam profile are recorded vs. both incident power and time. It is discussed how light intensity and temperature can be used as control parameters for the non-linear part of the refractive index. The experimental results confirm the existence of a threshold value of the incident light intensity at which the device switches from the scattering state to the transmissive state.     

3D mapping of the output laser beam from a PDLC sample

Self-transparency due to thermal non-linearities is presented as a basic switching effect in a thick polymer dispersed liquid crystal sample. For the first time a detailed 3D mapping of the output laser beam as a function of the x-y coordinates is presented: changes of the transmitted beam profile are recorded vs. both incident power and time. It is discussed how light intensity and temperature can be used as control parameters for the non-linear part of the refractive index. The experimental results confirm the existence of a threshold value of the incident light intensity at which the device switches from the scattering state to the transmissive state.     

On the response speed of pi-cells

We discuss the role of the Miesowicz viscosities on director reorientation in pi-cells, showing that the symmetry of this system allows for a simplification of the dynamical equations. We consider practical aspects of material optimisation for increased pi-cell switching speed. We make an observation regarding the switching speeds of positive and negative dielectric anisotropy surface mode devices.     

On the response speed of pi-cells

We discuss the role of the Miesowicz viscosities on director reorientation in pi-cells, showing that the symmetry of this system allows for a simplification of the dynamical equations. We consider practical aspects of material optimisation for increased pi-cell switching speed. We make an observation regarding the switching speeds of positive and negative dielectric anisotropy surface mode devices.     

Optical switching property from a laser beam propagating in a polymer dispersed liquid crystal film

Optical switching has been studied in epoxy-based polymer dispersed liquid crystal films. A 'self-transparency' effect is observed due to refractive index variations thermally induced either by heating the sample with a hot stage, or by absorption of the incident laser power. The switching phenomena were studied for different liquid crystal contents in the composites, and experimental evidence of light modulation by a probe beam is also reported. The thermo-optical behaviour of the material is correlated with the morphology of the samples. The results obtained verify the possibility of employing this type of material in optical devices based on the thermo-optical switching effect.     

Surface modification and the switching processes in ferroelectric liquid crystals

This work relates to the control of switching in ferroelectric liquid crystal devices. By considering the various parameters which influence the switching process a method of engineering both the location and threshold of domain nucleation sites has been developed. We have found that deliberate modification of the surface morphology has a profound influence on the domain switching process. This paper discusses the experimental cell construction and switching results.