Development of an enrofloxacin immunosensor based on label-free electrochemical impedance spectroscopy

Enrofloxacin is the most widespread antibiotic in the fluoroquinolone family. As such, the development of a rapid and sensitive method for the determination of trace amounts of enrofloxacin is an important issue in the health field. The interaction of the enrofloxacin antigen to a specific antibody (Ab) immobilized on an 11-mercapto-undecanoic acid-coated gold electrode was quantified by electrochemical impedance spectroscopy. Two equivalent circuits were separately used to interpret the obtained impedance spectra. These circuits included one resistor in series with one parallel circuit comprised of a resistor and a capacitor (1R//C), and one resistor in series with two parallel RC circuits (2R//C). The results indicate that the antigen-antibody reaction analyzed using the 1R//C circuit provided a more sensitive resistance increment against the enrofloxacin concentration than that of the 2R//C circuit. However, the 2R//C circuit provided a better fitting for impedance spectra, and therefore supplies more detailed results of the enrofloxacin-antibody interaction, causing the increase of electron transfer resistance selectively to the modified layer, and not the electrical double layer. The antibody-modified electrode allowed for analysis of the dynamic linear range of 1-1000 ng/ml enrofloxacin with a detection limit of 1 ng/ml. The reagentless and label-free impedimetric immunosensors provide a simple and sensitive detection method for the specific determination of enrofloxacin.     

Aptamer-based biosensor for label-free detection of ethanolamine by electrochemical impedance spectroscopy

A label-free sensing assay for ethanolamine (EA) detection based on G-quadruplex-EA binding interaction is presented by using G-rich aptamer DNA (Ap-DNA) and electrochemical impedance spectroscopy (EIS). The presence of K⁺ induces the Ap-DNA to form a K⁺-stabilized G-quadruplex structure which provides binding sites for EA. The sensing mechanism was further confirmed by circular dichroism (CD) spectroscopy and EIS measurement. As a result, the charge transfer resistance (R_CT) is strongly increased as demonstrated by using the ferro/ferricyanide ([Fe(CN)₆]^3−/4−) as a redox probe. Under the optimized conditions, a linear relationship between ΔR_CT and EA concentration was obtained over the range of 0.16 nM and 16 nM EA, with a detection limit of 0.08 nM. Interference by other selected chemicals with similar structure was negligible. Analytical results of EA spiked into tap water and serum by the sensor suggested the assay could be successfully applied to real sample analysis. With the advantages of high sensitivity, selectivity and simple sensor construction, this method is potentially suitable for the on-site monitoring of EA contamination.     

In situ hybridization of PNA/DNA studied label-free by electrochemical impedance spectroscopy

The in situ hybridization kinetics of label-free DNA on mixed monolayers of peptide nucleic acid (PNA) and 6-mercapto-1-hexanol (MCH) on Au electrodes was investigated by electrochemical impedance spectroscopy (EIS) and used to discriminate the fully complementary DNA from the single-base mismatched hybrids.     

Aptamer biosensor for label-free impedance spectroscopy detection of proteins based on recognition-induced switching of the surface charge

The recognition of proteins by aptamer-modified electrode transducers reverses the surface charge and leads to a novel label-free impedance spectroscopy bioelectronic detection protocol based on a decrease in the electron transfer resistance.     

Label-free detection of DNA molecules on the dendron based self-assembled monolayer by electrochemical impedance spectroscopy

We report preparation of a novel platform for effective DNA hybridization and its application to the detection of single mismatched DNA. Cone-shaped dendrimer molecules have been immobilized on the gold surface at equidistance, 3.1 nm, from each other with a probe DNA molecule attached to the top of each dendrimer so that enough space would be secured for effective hybridization. This arrangement allows each probe DNA molecule to form a natural DNA double helix upon hybridization with a target DNA molecule. The single nucleotide polymorphism at either the central or end position of the 25-mer target DNA has been shown to be effectively discriminated against on this platform from each other as well as from a complementary DNA by electrochemical impedance measurements. We also report adverse effects exerted by probe ions, Fe(CN)₆^3−/4−, on DNA hybridization reactions. The significance of the results for the use in DNA analysis is discussed.     

Mucin 4 detection with a label-free electrochemical immunosensor

Mucin 4 (MUC4) is a useful biomarker for endometriosis and cancers of the pancreas, esophagus and breast. The very first electrochemical immunosensor for the detection of MUC4 is reported, using carbon-based screen-printed electrodes modified by reaction with the diazonium salt of p-aminophenylacetic acid. Electrochemical impedance spectroscopy and cyclic voltammetry were used to characterize and optimize the electrografting process. The in situ surface modification through diazotation with phenylacetic groups enables the chemical binding of the specific antibody, followed by its affinity reaction with MUC4. The immunosensor was optimized with respect to several parameters and is very promising for clinical applications, having a limit of detection of 0.33 μg mL^− 1 and a linear domain between 1 and 15 μg mL^− 1 obtained by electrochemical impedance spectroscopy measurements.     

Improved electrochemical performances of polyaniline nanotubes-poly-L-lysine composite for label-free impedance detection of DNA hybridization

A sensitive label-free DNA hybridization biosensing platform was fabricated based on the synergistic effect of polyaniline nanotubes (PANI_nt) and poly-L-lysine (pLys). The composite of pLys and PANI_nt was coated onto the carbon paste electrode (CPE) to form a uniform and very stable nanocomposite membrane. The pLys in the composite film not only acts as a membrane to retain good electron transfer capability of PANI_nt even at physiological pH, but also possesses fine biocompatibility for bio-analytes. DNA probes with negatively charged phosphate groups were readily linked to the positively charged pLys surface due to the strong electrostatic affinity. The synergistic effect of PANI_nt and pLys could significantly enhance the sensitivity of DNA hybridization recognition. The phosphinothricin acetyltransferase (PAT) gene fragment from transgenic corn and the polymerase chain reaction amplification of the terminator of nopaline synthase gene from the real sample of a kind of transgenic soybean were detected by this DNA electrochemical biosensor via label-free impedance method. This stable composite gives convenient permselectivity properties as a transducer material for the design of modern electrochemical impedance biosensor using [Fe(CN)₆]^3?/4? as an indicator.     

Immobilization and hybridization of DNA based on magnesium ion modified 2,6-pyridinedicarboxylic acid polymer and its application for label-free PAT gene fragment detection by electrochemical impedance spectroscopy

A new approach for a simple electrochemical detection of PAT gene fragment is described. Poly(2,6-pyridinedicarboxylic acid) (PDC) modified glassy carbon electrode (GCE) was prepared by potential scan electropolymerization in an aqueous solution. Mg2 ions were incorporated by immer-sion of the modified electrode in 0.5 mol/L aqueous solution of MgCl2 to complete the preparation of a generic "activated" electrode ready for binding the probe DNA. The ssDNA was linked to the conduct-ing polymer by forming a bidentate complex between the carboxyl groups on the polymer and the phosphate groups of DNA via Mg2 . DNA immobilization and hybridization were characterized with dif-ferential pulse voltammetry (DPV) by using methylene blue (MB) as indicator and electrochemical im-pedance spectroscopy (EIS). The EIS was of higher sensitivity for DNA detection as compared with voltammetric methods in our strategy. The electron transfer resistance (Ret) of the electrode surface in EIS in [Fe(CN)6]3-/4- solution increased after the immobilization of the DNA probe on the Mg/PDC/GCE electrode. The hybridization of the DNA probe with complementary DNA (cDNA) made Ret increase further. The difference between the Ret at ssDNA/Mg/PDC/GCE and that at hybridization DNA modified electrode (dsDNA/Mg/PDC/GCE) was applied to determine the specific sequence related to the target PAT gene with the dynamic range comprised between 1.0 × 10-9 and 1.0 × 10_5 mol/L. A detection limit of 3.4 × 10-10 mol/L of oligonucleotides can be estimated.     

A label-free electrochemical biosensor for microRNA detection based on apoferritin-encapsulated Cu nanoparticles

MicroRNAs (miRNAs), a class of small endogenous nonprotein-coding RNAs, regulate a wide range of biological processes, and their abnormal expressions are related to the growth and development of plants. Thus, a simple, rapid, and highly sensitive assay for miRNA detection is of great significance. In this work, a label-free and ultrasensitive assay for miRNA detection using protein cage nanoparticles has been developed. Apoferritin-encapsulated Cu nanoparticles (Cu-apoferritin) could be immobilized on the electrode through special reaction between amino and carboxyl. Hybridization event between the probe DNA and the target miRNA-159a is confirmed by electrochemical oxidation signal after Cu released into the detection buffer by adjusting the pH. This assay is highly selective and sensitive with a low detection limit of 3.5 fM. Moreover, the developed method can even discriminate single-base mismatched strand between the complementary targets. The effect of abscisic acid on the expression level of miRNA-159a in Arabidopsis thaliana seeds was also investigated.     

A label-free electrochemical immunosensor based on gold nanoparticles for detection of paraoxon

An electrochemical immunosensor for the direct determination of paraoxon has been developed based on the biocomposites of gold nanoparticles loaded with paraoxon antibodies. The biocomposites are immobilized on the glassy carbon electrode (GCE) using Nafion membrane. On the immunosensor prepared paraoxon shows well-shaped CV with reduction and oxidation peaks located −0.08 and −0.03 mV versus SCE, respectively. The detection of paraoxon performed at −0.03 mV is beneficial for guaranteeing sufficient selectivity. The amount of the biocomposite consisting gold nanoparticles loaded with antibodies and the volume of Nafion solution used for fabricating the immunosensor have been studied to ensure sensitivity and conductivity of the immunosensor. The immunosensor has been employed for monitoring the concentrations of paraoxon in aqueous samples up to 1920 μg l⁻¹ with a detection limit of 12 μg l⁻¹.     

A label-free electrochemical immunoassay for IgG detection based on the electron transfer

In this study, a highly selective, label-free electrochemical immunoassay strategy based on the charge transport through the multilayer films associated with the electrocatalytic reduction of [Fe(CN)₆]³⁻ is proposed using human immunoglobulin G (human IgG) as the model analyte. The antibody-antigen complex formed on the sensing interface can efficiently induce change of the surface charge characteristics, the conductivity of multilayer film and/or electron transfer distance, resulting in an immunoreaction signal. The current reduction is proportional to the amount of analyte. Under the optimized experimental conditions, the proposed sensing strategy provides a linear dynamic range from 10 to 10⁴ ng mL⁻¹ and a detection limit of 3 ng mL⁻¹, indicating an improved analytical performance. This possibly makes it a potential alternative in bioanalysis of proteins and other molecules.     

Label-free detection of telomerase activity in HeLa cells using electrochemical impedance spectroscopy

A simple assay based on electrochemical impedance spectroscopy (EIS) for detection of telomerase activity is developed, and it is demonstrated that the label-free EIS method is capable of detecting the telomerase activity in HeLa cells with a detection limit of 1000 HeLa cells without using any amplification technique.     

A label-free electrochemical immunosensor based on multi-functionalized graphene oxide for ultrasensitive detection of microcystin-LR

In this paper, a label-free electrochemical immunosensor for ultrasensitive detection of microcystin-leucine-arginine (MC-LR) based on multi-functionalized graphene oxide was constructed. The graphene oxide has a large surface area for the immobilization of the antibody. Meanwhile, the introduction of the AuNPs and 1-butyl-3-methylimidazolium hexafluorophosphate could enhance the response of the current by improving the electrical conductivity. Thus the electrochemical immunosensor could be prepared through a one-step process and differential pulse voltammetry was employed to detect sensitively MC-LR. Under optimal conditions, the current response of the immunosensor decreased proportionally to the logarithmic concentrations of MC-LR in the range of 0.1–1000 ng/mL with a detection limit of 0.1 ng/mL (S/N = 3). This one-step label-free electrochemical immunosensor showed good performance in specificity, stability, reproducibility, and application.     

A label-free electrochemical biosensor based on a DNA aptamer against codeine

In order to develop a sensor for opium alkaloid codeine detection, DNA aptamers against codeine were generated by SELEX (systematic evolution of ligands by exponential enrichment) technique. An aptamer HL7-14, which is a 37-mer sequence with K_d values of 0.91 μM, was optimized by the truncation-mutation assay. The specificity investigation shows that HL7-14 exhibits high specificity to codeine over morphine, and almost cannot bind to other small molecule. With this new selected aptamer, a novel electrochemical label-free codeine aptamer biosensor based on Au-mesoporous silica nanoparticles (Au-MSN) as immobilized substrate has been proposed using [Fe(CN)₆]^3−/4− as electroactive redox probe. The linear range covered from 10 pM to 100 nM with correlation coefficient of 0.9979 and the detection limit was 3 pM. Our study demonstrates that the biosensor has good specificity, stability and well regeneration. It can be used to detect codeine.     

The immunosensors for measurement of 2,4-dichlorophenoxyacetic acid based on electrochemical impedance spectroscopy

Electrochemical impedance spectroscopy (EIS) was evaluated for the direct determination of herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). Specific antibody against 2,4-D was immobilised onto different gold electrodes. Several methods of antibody immobilisation by covalent linkage to modified surface were studied. Self-assembled monolayers formed using thiocompounds as cystamine, 4-aminothiophenol (ATPh), 3,3'-dithiopropionic acid di-(N-succinimidyl ester) (DTSP) and 11-mercaptoundecanoic acid (MUA) were chosen for the sensing surface activation. Three different sensor types were tested: screen-printed disc and finger-like structures and interdigitated array (IDA) electrodes produced by lithography. The measurements were carried out in a stationary arrangement, and the reaction between hapten and the immobilised antibody was observed online. Changes of impedance parameters were evaluated, and the best immobilisation technique (using 4-aminothiophenol) was chosen for further measurements. Impedance changes due to immunocomplex formation were evaluated, and the possibility of direct monitoring of 2,4-D binding to the antibody was demonstrated at a fixed frequency. For the strip sensor, the calibration curves were constructed in concentration range from 45 nmol l(-1) to 0.45 mmol l(-1) of 2,4-D.     

Electrochemical impedance spectroscopy detection of lysozyme based on electrodeposited gold nanoparticles

A simple, highly sensitive, and label-free electrochemical impedance spectroscopy (EIS) aptasensor based on an anti-lysozyme-aptamer as a molecular recognition element, was developed for the detection of lysozyme. Improvement in sensitivity was achieved by utilizing gold nanoparticles (AuNPs), which were electrodeposited onto the surface of a gold electrode, as a platform for immobilization of the aptamer. To quantify the amount of lysozyme, changes in the interfacial electron transfer resistance (R_et) of the aptasensor were monitored using the redox couple of an [Fe(CN)₆]^3−/4− probe. The R_et increased with lysozyme concentration. The plot of R_et against the logarithm of lysozyme concentration is linear over the range from 0.1 pM to 500 pM with a detection limit of 0.01 pM. The aptasensor also showed good selectivity for lysozyme without being affected by the presence of other proteins.     

A monoclonal antibody-based immunosensor for detection of Sudan I using electrochemical impedance spectroscopy

Sudan I monoclonal antibodies (Mabs) were prepared by hybridoma technique and firstly used to develop a Sudan I immunosensor by immobilizing the Mabs on a gold electrode. o-Mercaptobenzoic acid (MBA) was covalently conjugated on the gold electrode to form a self-assembled monolayer (SAM). The immobilization of Sudan I Mabs to the SAM was carried out through a stable acyl amino ester intermediate generated by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydrosuccinimide (NHS), which could condense antibodies reproducibly and densely on the SAM. The changes of the electrode behavior after each assembly step were investigated by cyclic voltammetric (CV) technique. The Sudan I concentration was measured through the increase of impedance values in the corresponding specific binding of Sudan I and Sudan I antibody. A linear relationship between the increased electron-transfer resistance (Ret) and the logarithmic value of Sudan I concentrations was found in the range of 0.05-50 ng mL⁻¹ with the detection limit of 0.03 ng mL⁻¹. Using hot chili as a model sample, acceptable recovery of 96.5-107.3% was obtained. The results were validated by conventional HPLC method with good correlation. The proposed method was proven to be a feasible quantitative method for Sudan I analysis with the properties of stability, highly sensitivity and selectivity.     

A cyclodextrin host-guest recognition approach to a label-free electrochemical DNA hybridization biosensor

A novel label-free electrochemical DNA hybridization biosensor using a β-cyclodextrin/poly(N-acetylaniline)/carbon nanotube composite modified screen printed electrode (CD/PNAANI/CNT/SPE) has been developed. The proposed DNA hybridization biosensor relies on the intrinsic oxidation signals of guanine (G) and adenine (A) from single-stranded DNA entered into the cyclodextrin (CD) cavity. Due to the binding of G and A bases to complementary cytosine and thymine bases in dsDNA, the signals obtained for ssDNA were much higher than that of dsDNA. The synergistic effect of the multi-walled carbon nanotubes provides a significantly enhanced voltammetric signal, and the CD encapsulation effect makes anodic peaks of G and A shift to less positive potentials than that at the bare SPE. The peak heights of G and A signals are dependent on both the number of the respective bases in oligonucleotides and the concentration of the target DNA sequences. Hybridization of complementary strands was monitored through the measurements of oxidation signal of purine bases, which enabled the detection of target sequences from 0.01 to 1.02 nmol μl(-1) with the detection limit of target DNA as low as 5.0 pmol μl(-1) (S/N = 3). Implementation of label-free and homogeneous electrochemical hybridization detection constitutes an important step toward low-cost, simple, highly sensitive and accurate DNA assay. Discrimination between complementary, noncomplementary, and two-base mismatch targets was easily accomplished using the proposed electrode.     

Local electrochemical impedance spectroscopy: A window into heterogeneous interfaces

The ability to probe surface reactivity on a local scale has led to a new insight into the comprehension of the electrochemical reactivity in relation with the microstructure of the surface. Among the different techniques developed in recent years, local electrochemical impedance spectroscopy has the advantage of using a transient approach to locally characterize a stationary electrochemical system without the need to add any redox mediator in solution, which is a great advantage for the study of different systems.In this review, particular attention is paid to the different ways of measuring the local impedance, and the technique implementing a local current measurement in solution is deeply discussed. This local electrochemical impedance spectroscopy journey also encompasses a discussion about technical and experimental limitations.