Synthesis of 4-(ω-hydroxyalkyl)-2,6-di-<Emphasis Type=Italic>tert</Emphasis>-butylphenols and the properties of related sulfides

Reaction of 2,6-di-tert-butylphenol with aliphatic linear and branched diols in an alkaline medium at a temperature of 180-220°C leads to the formation of 4-(ω-hydroxyalkyl)-2,6-di-tert-butylphenols. The increase in the product yield and reducing the reaction temperature was reached at the catalysis of this reaction with zinc oxide. The structure of the diphenylalkane derivatives generated in side reaction was proved and the structural influence of the length of the aliphatic residue on the antioxidant effectiveness of the sulfides derived from the corresponding hydroxyalkylphenols was examined.     

Solvent effects on the crystal photochromism of 4,4′-methylenebis{(<Emphasis Type="Italic">N</Emphasis>-3,5-di-<Emphasis Type="Italic">tert</Emphasis>-butylsalicylidene)-2,6-dimethylaniline}

4,4′-methylenebis{N-(3,5-di-tert-butylsalicylidene)-2,6-dimethylaniline} formed a definite acetone-inclusion crystal by recrystallization with acetone. Through crystal-to-crystal solvent exchange of the crystal, various types of crystals were obtained. All resulting crystals exhibited photochromism. Rate constants of thermal fading of photochromes were found to depend on the number of solvent molecules included in the crystal unit. The thermal stability of photochrome is discussed in connection with molecular mobility in the crystal lattice.     

Study of the reaction of 3,6-di-<Emphasis Type="Italic">tert</Emphasis>-butyl-<Emphasis Type="Italic">о</Emphasis>-benzoquinone with organozinc and organocadmium compounds

The effect of substituents in the reactions of 3,6-di-tert-butyl-о-benzoquinone with organozinc and organocadmium compounds, leading to three types of products: 3-alkyl-6-tert-butyl-о-benzoquinones, 4-alkyl-3,6-di-tert-butyl-о-benzoquinones, and 2-alkoxy-(or 2-phenoxy)-3,6-di-tert-butylphenols. Correlation analysis gave evidence to show that the first- and second-type products are formed by nucleophilic 1,2- and 1,4-addition, while substituted phenols result from single-electron transfer.     

Pseudo-Polymorphs of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′-Bis(4-nitrophenyl)-2,6-Pyridinedicarboxamide

Three pseudo-polymorphs of N, N′-bis(4-nitrophenyl)-2,6-pyridinedicarboxamide 1 were characterized by X-ray crystallography. The C–H ⋅s O hydrogen bond was found to contribute significantly to the assembly of this host. With the variation of the guest, the host changed the molecular conformation and the supramolecular synthons. In all three cases concerned, the solvent guests were bonded through direct host-guest interaction and accommodated in the voids formed by the assembly of the host.     

Features of phosphorylation of Per-6-<Emphasis Type="Italic">O</Emphasis>-(<Emphasis Type="Italic">tert</Emphasis>-butyldimethylsilyl)-β-cyclodextrin with a phosphorous diamidoester

Phosphorylation of secondary hydroxy groups in per-6-O-(tert-butyldimethylsilyl)-β-cyclodextrin with a phosphorous diamidoester is found to proceed, unlike phosphorylation of free β-cyclodextrin, at an elevated temperature and is accompanied by substantial desilylation.     

Liquid-phase oxidation of sulfides by an aluminum (and titanium) <Emphasis Type="Italic">tert</Emphasis>-butoxide—<Emphasis Type="Italic">tert</Emphasis>-butyl hydroperoxide system

A system aluminum (and titanium) tert-butoxide—tert-butyl hydroperoxide (1 : 2) under mild conditions (20 °C, 1 h) oxidizes aliphatic and alkylaromatic sulfides and diphenyl sulfide to the corresponding sulfones in yields close to 100%. The oxidation is induced by electron-excited dioxygen formed upon thermal decomposition of intermediate metal-containing peroxy trioxides (ozonides). The latter are formed as a result of the reversible reaction of aluminum or titanium tert-butoxides with tert-butyl hydroperoxide followed by the interaction of di-tert-butoxy-tert-butylperoxyaluminum and tri-tert-butoxy-tert-butylperoxytitanium that formed with another Bu^tOOH molecule. Aluminum-containing peroxide (Bu^tO)₂AlOOBu^t oxidizes sulfides to sulfoxides.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1663–1668, August, 2004.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-nitro-<Emphasis Type="Italic">N</Emphasis>′-(trimethylsilyl)carbodiimide

Nitration of N,N′-bis(trimethylsilyl)carbodiimide with N₂O₅ or (NO₂)₂SiF₆ afforded N-nitro-N´-(trimethylsilyl)carbodiimide, the first representative of N-nitro carbodiimides. Its further nitration led to the release of CO₂, which is presumably formed in the course of N,N´-dinitrocarbodiimide decomposition. The reactions of N-nitro-N´-(trimethylsilyl)carbodiimide with nucleophiles take place both at the tri methylsilyl group (for example, with NH₃) to give nitrocyanamide salts and at the carbodiimide C atom (for example, with Et₂NH) to give the corresponding nitroguan idines.     

Synthesis of per-6-<Emphasis Type="Italic">О</Emphasis>-(<Emphasis Type="Italic">tert</Emphasis>-butyl)(diphenyl)silyl-β-cyclodextrin

Per-6-O-(tert-butyl)(diphenyl)silyl-β-silylcyclodextrin has been obtained regioselectively via the reaction with tert-butyldiphenylchlorosilane. Further treatment of the product with chlorosilanes has led to the corresponding derivatives of β-cyclodextrin with mixed silyl groups at the primary hydroxyl groups.     

<Emphasis Type="Italic">N</Emphasis>-arylsulfanyl-<Emphasis Type="Italic">N</Emphasis>-arylsulfonyl(acyl)-<Emphasis Type="Italic">N</Emphasis>′-phenylthiourea sodium salts

Reactions of N-arylsulfonyl(acyl)arenesulfenamide sodium salts with phenyl isothiocyanate afforded N-arylsulfanyl-N-arylsulfonyl(acyl)-N-phenylthioura sodium salts which were found to increase thermal stability of finely dispersed poly(vinyl chloride).Translated from Zhurnal Organicheskoi Khimii, Vol. 40, No. 10, 2004, pp. 1532–1535.Original Russian Text Copyright © 2004 by Koval, Oleinik.     

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

Synthesis,structure, and magnetic properties of magnesium bis-3,6-di-<Emphasis Type="Italic">tert</Emphasis>-butyl-<Emphasis Type="Italic">о</Emphasis>-benzosemiquinonate complexes with N-donor ligands

A series of six-coordinate magnesium bis-3,6-di-tert-butyl-о-benzosemiquinonate complexes with different N-donor ligands (2,2´-dipyridyl, 1,10-phenanthroline, 2,9-dimethyl-1,10-phenanthroline, pyridine, N-phenyl-1-(4-pyridinyl)methanimine) were synthesized. The molecular and crystal structures of these complexes were determined by X-ray diffraction. In the complexes with bidentate N-donor ligands, the O,O-diolate o-semiquinone ligands are cis to each other, whereas the compounds with monodentate ligands contain organic radical anions in trans positions. The specific features of magnetic exchange coupling between organic radical ligands were studied by temperature-dependent magnetic susceptibility measurements.     

Preparation of surfactant-free nanoparticles of methoxy poly(ethylene glycol)-<Emphasis Type="Italic">b</Emphasis>-poly(D,L-lactide-<Emphasis Type="Italic">co</Emphasis>-glycolide-<Emphasis Type="Italic">co</Emphasis>-ɛ-caprolactone)

Surfactant-free nanoparticles of methoxy poly(ethylene glycol)-b-poly(D,L-lactide-co-glycolide-co-ɛ-caprolactone) diblock copolymers (MPEG-b-PDLLGCL) with different DLL:G:CL ratios were prepared by modified-spontaneous emulsification solvent diffusion method. Sizes of resulted colloidal nanoparticles obtained from light-scattering analysis were in the range of 121–132 nm with narrow size distribution. The nanoparticle sizes depended on the composition of the PDLLGCL block. Scanning electron microscopy demonstrated that the nanoparticles were aggregated after drying process, suggested they were soft nanoparticles. However, their initial aggregates can be observed and it was shown that the nanoparticles have spherical shape with smooth surface. The text was submitted by the authors in English.     

SBR composites reinforced with <Emphasis Type="Italic">N</Emphasis>-isopropyl-<Emphasis Type="Italic">N</Emphasis>′-phenyl-<Emphasis Type="Italic">P</Emphasis>-phenylenediamine-modified clay

SBR compounds including the N-isopropyl-N’-phenyl-p-phenylenediamine-modified clay(organoclay) were prepared.Effects of modified clay and antioxidant(IPPD) contents on mechanical and rheological properties of SBR composites were studied.FTIR results confirmed that the clay was chemically modified by IPPD and changed into an organoclay.X-ray diffraction(XRD) results confirmed the increase in interlayer distance of the clay due to the insertion of IPPD.Rheological and cure characteristics of SBR compounds were determined using RPA(Rubber Process Analyzer) and rheometer.Scorch time and cure time of SBR compounds decreased with introduction of the organoclay.Mechanical properties and heat aging resistance of the SBR composites were improved significantly by incorporation of the organoclay.     

Specific Features of Phosphorylation of Per-6-<Emphasis Type="Italic">O</Emphasis>-(<Emphasis Type="Italic">tert</Emphasis>-butyl)(dimethyl)silyl-β-cyclodextrin with Tetraethylphosphorodiamidous Chloride

The pathway of phosphorylation of per-6-O-(tert-butyl)(dimethyl)silyl-β-cyclodextrin with tetraethylphosphorodiamidous chloride significantly depends on the solvent and amine, as well as on temperature. It is possible to choose the phosphorylation conditions ensuring formation of products with prevalence of definite phosphorus functional groups.     

Controlled radical copolymerization of styrene and <Emphasis Type="Italic">tert</Emphasis>-butyl acrylate in the presence of tri-<Emphasis Type="Italic">n</Emphasis>-butylborane–<Emphasis Type="Italic">p</Emphasis>-quinone catalytic system

Radical copolymerization of styrene with tert-butyl acrylate is studied under different conditions. It is found that the addition of tri-n-butylborane or tri-n-butylborane along with p-quinones (2,3-dimethylbenzoquinone, 2,5-di-tert-butylbenzoquinone) results in changes in the relative activities of monomers. Copolymerization in the presence of tri-n-butylborane and p-quinones proceeds via the mechanism of reversible inhibition and is characterized by the linear increase in number-average molecular weight with conversion and by the capacity of copolymers of reinitiation. The hydrolyzed copolymer samples form more stable films compared to copolymers prepared via conventional radical copolymerization.     

Preparation and crystal structure of bis(triethylene glycol-<Emphasis Type="Italic">O</Emphasis>,<Emphasis Type="Italic">O</Emphasis>′,<Emphasis Type="Italic">O</Emphasis>′’,<Emphasis Type="Italic">O</Emphasis>‴)manganese(II) dibromide

A new complex, bis(triethylene glycol-O,O′,O′’,O?)manganese(II) dibromide [Mn(TEG)₂]²⁺·2Br^?, was prepared. Its structure was studied by single crystal X-ray diffraction. The complex cation [Mn(TEG)₂]²⁺ is of the host-guest type with two TEG ligands (podands) as hosts. Both TEG ligands are disordered and tetradentate, with all the four oxygen atoms of each ligand participating in the coordination. The Mn²⁺ cation has coordination number 8, and its coordination polyhedron is a distorted bisdisphenoid (trigonal dodecahedron). The geometric parameters (bond lengths, bond and torsion angles) of the complex were determined relatively accurately. In the crystal structure, the ions form infinite thick layers by interionic hydrogen bonds O-H···Br^?.     

1,3-Diamino-2-Hydroxypropane-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-Tetraacetic Acid: Crystal and Molecular Structures

The synthesis, IR spectroscopic study, and X-ray diffraction analysis (CIF file CCDC no. 1574078) are carried out for 1,3-diamino-2-hydroxypropane-N,N,N′,N′-tetraacetic acid (I). The structural units of a crystal of compound I are (H_4.5HPdta)^0.5– anions, (H_5.5HPdta)^0.5+ cations, and molecules of water of crystallization joined by a branched network of hydrogen bonds: strong intermolecular O–H…O and intramolecular N–H…O bonds.     

Synthesis and reactivity of 2-(2-furyl)-1,7-dimethyl-1<Emphasis Type="Italic">H</Emphasis>,7<Emphasis Type="Italic">H</Emphasis>-benzo[1,2-<Emphasis Type="Italic">d</Emphasis>: 3,4-<Emphasis Type="Italic">d</Emphasis>′]diimidazole

2-(2-Furyl)-1,7-dimethyl-1H,7H-benzo[1,2-d: 3,4-d′]diimidazole was synthesized by the Weidenhagen reaction followed by N-methylation. Electrophilic substitution reactions of the title compound (nitration, bromination, sulfonation, formylation, and acylation) involved both the furan ring and central benzene fragment.     

Synthesis and antibacterial and antifungal activities of <Emphasis Type="Italic">N</Emphasis>-(tetra-<Emphasis Type="Italic">O</Emphasis>-acetyl-β-<Emphasis Type="SmallCaps">d</Emphasis>-glucopyranosyl)thiosemicarbazones of substituted 4-formylsydnones

Background

Sydnone is a heterocycle that exhibits remarkable pharmacological activities, including antimicrobial, anti-inflammatory, analgesic, antipyretic and antioxidant activities. Thiosemicarbazones are of compounds that contain the –NHCSNHN=C< linkage group and are considerable interest because they exhibit important chemical properties and potentially beneficial biological activities. Similarly, thiosemicarbazones having carbohydrate moieties also exhibit various significant biological activities.

Results

The compounds of 3-formyl-4-phenylsydnones were obtained by Vilsmeyer-Haack’s formylation reaction and were transformed into thiosemicarbazones by condensation reaction with N-(2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl)thiosemicarbazide. Reaction were performed in the presence glacial acetic acid as catalyst using microwave-assisted heating method. Reaction yields were 43?85 %. The antimicrobial activities of these thiosemicarbazones were screened in vitro by using agar well diffusion and MIC methods. Among these thiosemicarbazones, compounds 4k, 4l, 4m and 4n were more active against all tested bacterial strains, especially against S. epidermidis, B. subtilis and E. coli. The MIC values in these cases are 0.156, 0.156 and 0.313 μg/mL, respectively. All compounds showed weak to moderate antifungal activity against C. albicans and A. niger than nystatin (MIC = 0.156?0.625 μg/mL vs. MIC = 0.078 μg/mL of nystatin), and thiosemicarbazones 4l, 4m and 4n exhibited significant activity with MIC = 0.156 μg/mL. These compounds also had good antifungal activity against F. oxysporum similarly to nystatin (MIC = 0.156 μg/mL). Among the tested compounds having halogen group 4k, 4l, 4m and 4n showed highest activity against three strains of fungal organisms.

Conclusions

In summary, we have developed a clean and efficient methodology for the synthesis of novel thiosemicarbazone derivatives bearing sydnone ring and d-glucose moiety; the heterocyclic and monosaccharide system being connected via ?NH?C(=S)NH?N=C< linker using molecular modification approach. The methodology could be further extended and used for the synthesis of other thiosemicarbazones of biological importance. 4-Formyl-3-arylsydnone N-(2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl)thiosemicarbazones have been synthesized under microwave-assisted heating conditions. Almost all obtained compounds showed remarkable activities against the tested microorganisms. Among the tested compounds having halogen group 4k, 4l, 4m and 4n showed highest activity against all tested strains of bacterial and fungal organisms.

Open image in new window

Graphical abstract:Synthesis and antibacterial and antifungal activities of N-(tetra-O-acetyl-β-D-glucopyranosyl)thiosemicarbazones of substituted 4-formylsydnones