Uniformly sized molecularly imprinted polymer for (S)-naproxen retention and molecular recognition properties in aqueous mobile phase

A uniformly sized molecularly imprinted polymer (MIP) for (S)-naproxen has been prepared by a multi-step swelling and polymerization method using 4-vinylpyridine (4-VPY) and ethylene glycol dimethacrylate (EDMA) as a functional monomer and cross-linker, respectively. We optimized the preparation method of the MIP by changing the molar amounts of the template molecule and functional monomer. Further, we examined the effects of organic modifier type, column temperature and flow-rate on the retentivity and enantioselectivity for naproxen using a mixture of phosphate buffer and organic modifier (acetonitrile, ethanol and 2-propanol) as an eluent. When the amounts of (S)-naproxen, 4-VPY and EDMA used were 4, 6 and 25 mmol, respectively, the enantioselectivity and resolution for naproxen were good despite the shorter retention. When acetonitrile was used as an organic modifier, the highest column efficiency was obtained for the separation of naproxen enantiomers. With regard to the effects of column temperature and flow-rate, the column performance was improved by elevating a column temperature and decreasing a flow-rate.     

Uniform-sized molecularly imprinted polymer for metsulfuron-methyl by one-step swelling and polymerization method

Uniform-sized molecularly imprinted polymer (MIP) beads for metsulfuron-methyl (MSM) were firstly prepared by one-step swelling and polymerization method using 4-vinylpyridine (4-VPY) and ethylene glycol dimethacrylate (EDMA) as functional monomer and cross-linker, respectively. The preparation was optimized by varying the ratio of MSM to 4-VPY. The chromatographic behaviors of MSM and other structurally related sulfonylureas (SUs) on the resultant MIP column were evaluated. The imprinted polymer revealed specific affinity to the template and the fair resolution of SUs was also obtained. Furthermore, the uniform-sized MSM-MIP was used as the solid phase extraction (SPE) material to enrich MSM in real water samples before reversed-phase HPLC (RP-HPLC) analysis. The recovery of MSM from 100 mL of drinking water at a 50 ng/L spike level was 99.59% with R.S.D. of 1.13%. The detection limit was about 6.0 ng/L of MSM when enriching a 100 mL water sample.     

Electrochemical sensing with electrodes modified with molecularly imprinted polymer films

This article summarises our work on the development of voltammetric sensors based on molecularly imprinted polymers. Several recognition elements and integration strategies were used:1.membranes electropolymerised at the electrode surface; 2.casting of polymeric membranes by drop-coating a solution of pre-formed polymer (polyphosphazene) and template in a low-boiling-point solvent on to the electrode surface; 3.preparation of composite membranes containing conductive material (graphite or carbon black), acrylic-type molecularly imprinted polymers (small particle size), and PVC as binder; and 4.in-situ polymerisation of a thin layer of acrylic imprinted polymer deposited on the electrode surface by spin coating.All the options evaluated offer the possibility of controlling electrode characteristics such as hydrophobic/hydrophilic character, permeability, or film thickness, which are essential for obtaining good sensor performance.     

Monodispersed molecularly imprinted polymer for creatinine by modified precipitation polymerization

A monodispersed molecularly imprinted polymer (MIP) for creatinine was prepared by modified precipitation polymerization. The retention and molecular-recognition properties of the prepared MIP were evaluated by the hydrophilic interaction chromatography mode using a mixture of ammonium acetate buffer and acetonitrile as a mobile phase in liquid chromatography. The MIP had a specific recognition ability for creatinine, while other structurally related compounds, such as hydantoin, 1-methylhydantoin, 2-pyrrolidone, N-hydroxysuccinimide and creatine, could not be recognized on the MIP. In addition to shape recognition, hydrophilic interactions could work for the recognition of creatinine on the MIP.     

Chiral separation by （S）-naproxen imprinted monolithic column with mixed functional monomers

Molecularly imprinted polymers (MIPs), using (S)-naproxen as template and the combination of butyl methacrylate (BMA) and MAA (1:1 molar ratio) as functional monomers were synthesized by an in situ polymerization reaction. The rendered monolithic column was evaluated in HPLC mode. The result showed that the monolithic MIPs with the combination of two monomers produced better chiral resolution of rac-naproxen (Rs=1.55) and column efficiencies of imprinted molecules (N=2860 plates/m)than that with pure MAA.     

Preparation of hydrophilic molecularly imprinted polymers for tetracycline antibiotics recognition

Hydrophilic molecularly imprinted polymers(MIPs) were prepared using tetracycline as template,methacrylic acid as monomer and glycidilmethacrylate as pro-hydrophilic co-monomer.Compared with common MIPs,the imprinting effect and adsorption amounts of hydrophilic MIPs for tetracycline(TC) were greatly improved in water media.Furthermore,the electrochemical sensor fabricated by modifying hydrophilic MIPs on glassy carbon electrode was developed for the determination of TC in foodstuff samples.     

Acetylsalicylic acid electrochemical sensor based on PATP-AuNPs modified molecularly imprinted polymer film

A novel electrochemical sensor based on molecularly imprinted polymer film has been developed for aspirin detection. The sensitive film was prepared by co-polymerization of p-aminothiophenol (p-ATP) and HAuCl(4) on the Au electrode surface. First, p-ATP was self-assembled on the Au electrode surface by the formation of Au-S bonds. Then, the acetylsalicylic acid (ASA) template was assembled onto the monolayer of p-ATP through the hydrogen-bonding interaction between amino group (p-ATP) and oxygen (ASA). Finally, a conductive hybrid membrane was fabricated at the surface of Au electrode by the co-polymerization in the mixing solution containing additional p-ATP, HAuCl(4) and ASA template. Meanwhile, the ASA was spontaneously imprinted into the poly-aminothiophenol gold nanoparticles (PATP-AuNPs) complex film. The amount of imprinted sites at the PATP-AuNPs film significantly increases due to the additional replenishment of ASA templates. With the significant increasing of imprinted sites and doped gold nanoparticles, the sensitivity of the molecular imprinted polymer (MIP) electrode gradually increased. The molecularly imprinted sensor was characterized by electrochemical impedance spectroscopy (EIS), differential pulse voltammetry (DPV), and cyclic voltammetry (CV). The linear relationships between current and logarithmic concentration were obtained in the range from 1 nmol L(-1) to 0.1 μmol L(-1) and 0.7 μmol L(-1) to 0.1 mmol L(-1). The detection limit of 0.3 nmol L(-1) was achieved. This molecularly imprinted sensor for the determination of ASA has high sensitivity, good selectivity and reproducibility, with the testing in some biological fluids also has good selectivity and recovery.     

A microvolume molecularly imprinted polymer modified fiber-optic evanescent wave sensor for bisphenol A determination

A fiber-optic evanescent wave sensor for bisphenol A (BPA) determination based on a molecularly imprinted polymer (MIP)-modified fiber column was developed. MIP film immobilized with BPA was synthesized on the fiber column, and the sensor was then constructed by inserting the optical fiber prepared into a transparent capillary. A microchannel (about 2.0 μL) formed between the fiber and the capillary acted as a flow cell. BPA can be selectively adsorbed online by the MIP film and excited to produce fluorescence by the evanescent wave produced on the fiber core surface. The conditions for BPA enrichment, elution, and fluorescence detection are discussed in detail. The analytical measurements were made at 276 nm/306 nm (λ _ex/λ _em), and linearity of 3?×?10^?9–5?×?10^?6 g mL^?1 BPA, a limit of detection of 1.7?×?10^?9 g mL^?1 BPA (3σ), and a relative standard deviation of 2.4 % (n?=?5) were obtained. The sensor selectivity and MIP binding measurement were also evaluated. The results indicated that the selectivity and sensitivity of the proposed fiber-optic sensor could be greatly improved by using MIP as a recognition and enrichment element. Further, by modification of the sensing and detection elements on the optical fiber, the proposed sensor showed the advantages of easy fabrication and low cost. The novel sensor configuration provided a platform for monitoring other species by simply changing the light source and sensing elements. The sensor presented has been successfully applied to determine BPA released from plastic products treated at different temperatures.

Poly(methylene green) employed as molecularly imprinted polymer matrix for electrochemical sensing

This paper describes the development of a molecularly imprinted polymer (MIP) for theophylline that can be used for electrochemical sensing. Theophylline is a commonly used medication for the treatment of asthma. Due to its very narrow therapeutic index, it may have toxic and potentially fatal effects on the individual. Electrochemical detection of theophylline is difficult, because its molecular structure and standard reduction potential are very similar to that of caffeine. A new method for fabricating molecularly imprinted polymers is proposed utilizing methylene green. Poly(methylene green)(PMG), prepared by electropolymerization of an azine, methylene green, was imprinted for theophylline. PMG-based MIP-coated electrodes showed sensitivity towards the presence of the imprint molecule in solutions, as well as selectivity for the imprint over the interferent molecule caffeine. The PMG-based MIP-coated electrode described in this paper had an improved selectivity factor and reproducibility compared to other theophylline-imprinted MIP-coated electrodes in literature.     

A novel molecularly imprinted sensor for selectively probing imipramine created on ITO electrodes modified by Au nanoparticles

A sensitive molecularly imprinted electrochemical sensor was created for selective detection of a tricyclic antidepressant imipramine by combination of Au nanoparticles (Au-NPs) with a thin molecularly imprinted film. The sensor was fabricated onto the indium tin oxide (ITO) electrode via stepwise modification of Au-NPs by self-assembly and a thin film of molecularly imprinted polymers (MIPs) via sol-gel technology. It was observed that the molecularly imprinted film displayed excellent selectivity towards the target molecule imipramine. Meanwhile, the introduced Au-NPs exhibited noticeable catalytic activities towards imipramine oxidation, which remarkably enhanced the sensitivity of the imprinted film. Due to such combination, the as-prepared sensor responded quickly to imipramine, within only 1 min of incubation. The differential voltammetric anodic peak current was linear to the logarithm of imipramine concentration in the range from 5.0 × 10⁻⁶ to 1.0 × 10⁻³ mol L⁻¹, and the detection limits obtained was 1.0 × 10⁻⁹ mol L⁻¹. This method proposed was successfully applied to the determination of imipramine in drug tablets, and proven to be reliable compared with conventional UV method. These results reveal that such a sensor fulfills the selectivity, sensitivity, speed and simplicity requirements for imipramine detection, and provides possibilities of clinical application in physiological fluids.     

Layer-by-layer assembled molecularly imprinted polymer modified silver electrode for enantioselective detection of D- and L-thyroxine

The present work describes a new, simple, and easy method for the generation of stable molecularly imprinted sites in polymeric film, combining self-assembled monolayer and Layer-by-layer approaches through thermal cross-linking of the layered structures, onto the surface of silver electrode. Modified silver electrodes demonstrate enantiodifferentiation and sensitive (detection limits 0.0060 ng mL(-1) for L- and 0.0062 for D-thyroxine) determination of d- and l-thyroxine with the help of differential pulse anodic stripping voltammetric technique. The binding kinetics of thyroxine was explored using anodic stripping cyclic voltammetry and chronocoulometry. The sensor was also validated for D- and L-thyroxine determinations in biological and pharmaceutical samples.     

A molecularly imprinted polymer for the determination of neopterin

A molecularly imprinted polymer (MIP) for the specific retention of neopterin has been developed. A set of 6 polymers was prepared by radical polymerization under different experimental condition using methacrylic acid as functional monomer and ethylene glycol dimethacrylate as crosslinker, with the aim to understand their influence on the efficiency of the MIP. The performance of each MIP was tested in batch experiments via their binding capacity. The MIP prepared in the presence of nickel ions in dimethylsulfoxide-acetonitrile mixture (P4) exhibited the highest binding capacity for neopterin (260 μmol per gram of polymer). A selectivity study with two other pteridines demonstrated the polymer P4 also to possess the best selectivity.

A molecularly imprinted polymer for the specific retention of neopterin was developed. A set of 6 polymers was prepared under different experimental condition. The performance of each MIP was tested through their binding capacity. The MIP P4 prepared in the presence of nickel ions exhibited the highest binding capacity

     

Development of andrographolide molecularly imprinted polymer for solid-phase extraction

A method employing molecularly imprinted polymer (MIP) as selective sorbent for solid-phase extraction (SPE) to pretreat samples was developed. The polymers were prepared by precipitation polymerization with andrographolide as template molecule. The structure of MIP was characterized and its static adsorption capacity was measured by the Scatchard equation. In comparison with C(18)-SPE and non-imprinted polymer (NIP) SPE column, MIP-SPE column displays high selectivity and good affinity for andrographolide and dehydroandrographolide for extract of herb Andrographis paniculata (Burm.f.) Nees (APN). MIP-SPE column capacity was 11.9±0.6 μmol/g and 12.1±0.5 μmol/g for andrographolide and dehydroandrographolide, respectively and was 2-3 times higher than that of other two columns. The precision and accuracy of the method developed were satisfactory with recoveries between 96.4% and 103.8% (RSD 3.1-4.3%, n=5) and 96.0% and 104.2% (RSD 2.9-3.7%, n=5) for andrographolide and dehydroandrographolide, respectively. Various real samples were employed to confirm the feasibility of method. This developed method demonstrates the potential of molecularly imprinted solid phase extraction for rapid, selective, and effective sample pretreatment.     

A molecularly imprinted polymer for the determination of neopterin

A molecularly imprinted polymer (MIP) for the specific retention of neopterin has been developed. A set of 6 polymers was prepared by radical polymerization under different experimental condition using methacrylic acid as functional monomer and ethylene glycol dimethacrylate as crosslinker, with the aim to understand their influence on the efficiency of the MIP. The performance of each MIP was tested in batch experiments via their binding capacity. The MIP prepared in the presence of nickel ions in dimethylsulfoxide-acetonitrile mixture (P4) exhibited the highest binding capacity for neopterin (260 μmol per gram of polymer). A selectivity study with two other pteridines demonstrated the polymer P4 also to possess the best selectivity.

A micro-reactor for preparing uniform molecularly imprinted polymer beads

In this study, uniform spherical molecularly imprinted polymer beads were prepared via controlled suspension polymerization in a spiral-shaped microchannel using mineral oil and perfluorocarbon liquid as continuous phases. Monodisperse droplets containing the monomers, template, initiator, and porogenic solvent were introduced into the microchannel, and particles of uniform size were produced by subsequent UV polymerization, quickly and without wasting polymer materials. The droplet/particle size was varied by changing the flow conditions in the microfluidic device. The diameter of the resulting products typically had a coefficient of variation (CV) below 2%. The specific binding sites that were created during the imprinting process were analysed via radioligand binding analysis. The molecularly imprinted microspheres produced in the liquid perfluorocarbon continuous phase had a higher binding capacity compared with the particles produced in the mineral oil continuous phase, though it should be noted that the aim of this study was not to optimize or maximize imprinting performance, but rather to demonstrate broad applicability and compatibility with known MIP production methods. The successful imprinting against a model compound using two very different continuous phases (one requiring a surfactant to stabilize the droplets the other not) demonstrates the generality of this current simple approach.     

Capacitive chemical sensor for fenvalerate assay based on electropolymerized molecularly imprinted polymer as the sensitive layer

A capacitive chemical sensor for fenvalerate is reported. By using ac impedance measurements the sensor has been based on the decrease in capacitance caused by the analyte used as the template in the formulation of an electropolymerized molecularly imprinted polymer as receptor layer. Improvement of the insulating properties of the sensor was investigated in detail. The capacitive sensor was prepared by a deposition of a self-assembled monolayer of 2-mercaptobenzimidazole (2-MBI) before electropolymerization of 2-MBI and subsequent treatment with n-dodecanethiol to eliminate pinholes and defects in the polymerized 2-MBI film. From the calibration curve concentrations of fenvalerate up to 9 g mL^–1 could be detected with a linear determination range up to 5 g mL^–1 and a detection limit of 0.36 g mL^–1. No significant interference was observed from common pyrethroid insecticides.     

Fluorometric determination of quercetin by using graphitic carbon nitride nanoparticles modified with a molecularly imprinted polymer

The authors describe a fluorescent probe for sensitive and selective determination of quercetin, an indicator for the freshness of drinks. The probe consists of silica ball encapsulated graphitic carbon nitride (g-C₃N₄) modified with a molecularly imprinted polymer (MIP). It was synthesized via reverse microemulsion. The resulting MIP@g-C₃N₄ nanocomposite was characterized by fluorescence spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray powder diffraction. Quercetin quenches the fluorescence of the MIP@g-C₃N₄ probe. The effect was used to quantify quercetin in grape juice, tea juice, black tea, and red wine by fluorometry (λ_exc?=?350 nm, λ_em?=?460 nm). Response is linear in the 10–1000 ng mL^?1 quercetin concentration range. The detection limit is 2.5 ng mL^?1, recoveries range between 90.7 and 94.1%, and relative standard deviations are between 2.1 and 5.5%.

Open image in new window

Graphical abstract Schematic of the synthesis of the MIP@g-C₃N₄ by a reverse microemulsion method. The probe was applied for the selective recognition and fluorometric determination of quercetin.

     

A piezoelectric biomimetic sensor for aminopyrine with a molecularly imprinted polymer coating

A molecularly imprinted polymer for aminopyrine was synthesized using methacrylic acid as functional monomer. The polymer was employed as the recognition element of a piezoelectric bulk acoustic wave biomimetic sensor for aminopyrine. Influencing factors were investigated in detail and optimized. This sensor exhibited high selectivity and sensitivity to aminopyrine. The response range of the sensor was between 5.0 x 10(-8) and 1.0 x 10(-4) M with a detection limit of 2.5 x 10(-8) M in the aqueous system. Scatchard analysis with UV spectrophotometry showed that the same class of binding sites was formed in the molecularly imprinted polymer in the studied concentration range, and the dissociation constant and the apparent maximum number of these binding sites were estimated to be 2.29 mM and 165.0 mumol g-1 dry polymer, respectively. Impedance analysis was employed to verify the imprinting effect and lack of variation in the viscoelasticity of the polymer coating during detection.