Direct determination of germanium in botanical samples by graphite furnace atomic absorption spectrometry with palladium-zirconium as chemical modifier

A method has been described for the direct determination of trace levels of germanium by graphite furnace atomic absorption spectrometry (GFAAS) using chemical matrix modification technique. The stabilization and the pyrolysis temperatures for germanium were investigated with various chemical modifiers including palladium, palladium–magnesium, palladium–strontium and palladium–zirconium. The highest pyrolysis temperature and highest integrated absorbance were obtained using palladium–zirconium modifier, and the severe matrix interference from sulfate can be eliminated. The characteristic mass and absolute detection limit (3σ) of germanium were found to be 16 and 12 pg, respectively. The proposed method was applied to the determination of trace levels of germanium in botanical samples with a recovery range of 92–106%. The hydride generation atomic fluorescence spectrometric (HGAFS) method was employed to analyze the samples and the results agree well with those obtained by GFAAS. The contents of germanium in standard reference materials were determined and the results were in good agreement with the reference values.     

Distillation, on-line RP C18 preconcentration and HPLC-UV-PCO-CVAAS as a new combination for the determination of methylmercury in sediments and fish tissue

 Distillation as a way of sample digestion has been combined with on-line RP C18 preconcentration and HPLC-UV-PCO-CVAAS (high performance liquid chromatography – ultra violet – post column oxidation – cold vapour atomic absorption spectrometry) for the determination of methylmercury at background levels in sediments, soils and fish tissue. To prove the accuracy of this method, it was applied to sediment and fish tissue reference materials. The results correspond with the reference values within their error ranges. Excellent recoveries (92–95%) were obtained for the sediment samples by means of the standard addition method. The standard deviations of the sediment samples were within an acceptable range (7.2–12.5%), those of the fish samples were substantially lower (3.4–5.0%). The detection limit is 0.04 ng/g for 1 g sample weight. Received: 23 November 1995/Revised: 16 April 1996/Accepted: 20 April 1996     

Simultaneous voltammetric determination of molybdenum and copper in biological samples

 A selective, sensitive and reliable voltammetric method for the simultaneous determination of Cu and Mo is developed. Both metals form complexes with 8-hydroxyquinoline (oxine). Mo gives two reduction peaks with oxine in acidic chloride media at −0.52 V and −0.58 V, while copper exhibits only one at −0.14 V. Common heavy metals do not interfere at all. The limit of detection is 0.29 ng/ml for Mo and 0.14 ng/ml for Cu after preconcentration on the hanging mercury drop electrode for 30 s at −0.2 V. The R.S.D. at a concentration level of 10 ng/ml is 3.8% for Cu and 5.3% for Mo. The method is applied to different biological samples. Received: 15 January 1996/Revised: 11 April 1996/Accepted: 16 April 1996     

Determination of cadmium in indium phosphide by electrothermal atomic absorption spectrometry and ion-selective electrode potentiometry

 Two independent methods for the determination of cadmium in cadmium-doped indium phosphide have been developed. Electrothermal atomic absorption spectrometry (ETAAS) utilized both platform atomization and a chemical modifier composed of magnesium nitrate and orthophosphoric acid. As the matrix mass was found to influence the cadmium sensitivity, matrix matched calibration standards were necessary. The detection limit (3s_B) is 0.20 μg/g for a 100 mg sample. The electrochemical method employed a solid-state cadmium sulfide-silver sulfide electrode as potentiometric sensor. An excess of indium (III) influenced the electrode response. A preliminary chelation-extraction of indium with acetylacetone at pH 5.0 in acetate buffer overcame the interference. The detection limit of the ISE-potentiometric method is 10 μg/g for a 200 mg sample. Two indium phosphide single crystals grown from melts doped with cadmium sulfide or cadmium telluride were analyzed for their cadmium content. Received: 27 August 1996/Revised: 27 January 1997/Accepted: 30 January 1997     

Detection of estradiol and testosterone in hair of cattle by HPL/EIA

 This study concerns the detection of natural steroid hormones in hair of cattle. Estradiol (E₂) and testosterone (T) were chosen as representatives of estrogens and androgens. In particular, the influence of age, sex and hair pigmentation on the steroid concentrations was investigated. Samples were obtained from numerous steers, cows, bulls, and female and male calves. The extraction procedure for E₂ and T from hair comprised liquid-liquid and solid-phase extraction and was followed by an essential high-performance liquid chromatography (HPLC) step for further purification of the extracts. Final quantification was performed with specific enzyme immunoassays (EIA). Lower E₂-concentrations were detected in the hair of some steers, cows, and bulls (approximately 1 ng/g), in several of these hair samples the concentrations of E₂ were below the limit of detection. Testosterone was measured in the hair of steers (approximately 3 ng/g), cows (approximately 6 ng/g), and bulls (in average 15 ng/g). There was a significant difference in the testosterone concentrations of white (approximately 8 ng/g) and of black hair (approximately 33 ng/g) of bulls. In hair from all male and female calves, E₂ and T were measured. The concentrations amounted approximately to 9 ng E₂/g and 3 ng T/g for female calves and to 5 ng E₂/g and 7 ng T/g for male calves. There was no significant influence of sex or hair colour on the steroid concentrations in hair of calves. The results suggest that the method is a powerful means to detect natural steroid hormones in hair of animal origin. Received: 2 August 1996/Revised: 30 August 1996/Accepted: 5 September 1996     

Detection of estradiol and testosterone in hair of cattle by HPL/EIA

 This study concerns the detection of natural steroid hormones in hair of cattle. Estradiol (E₂) and testosterone (T) were chosen as representatives of estrogens and androgens. In particular, the influence of age, sex and hair pigmentation on the steroid concentrations was investigated. Samples were obtained from numerous steers, cows, bulls, and female and male calves. The extraction procedure for E₂ and T from hair comprised liquid-liquid and solid-phase extraction and was followed by an essential high-performance liquid chromatography (HPLC) step for further purification of the extracts. Final quantification was performed with specific enzyme immunoassays (EIA). Lower E₂-concentrations were detected in the hair of some steers, cows, and bulls (approximately 1 ng/g), in several of these hair samples the concentrations of E₂ were below the limit of detection. Testosterone was measured in the hair of steers (approximately 3 ng/g), cows (approximately 6 ng/g), and bulls (in average 15 ng/g). There was a significant difference in the testosterone concentrations of white (approximately 8 ng/g) and of black hair (approximately 33 ng/g) of bulls. In hair from all male and female calves, E₂ and T were measured. The concentrations amounted approximately to 9 ng E₂/g and 3 ng T/g for female calves and to 5 ng E₂/g and 7 ng T/g for male calves. There was no significant influence of sex or hair colour on the steroid concentrations in hair of calves. The results suggest that the method is a powerful means to detect natural steroid hormones in hair of animal origin. Received: 2 August 1996/Revised: 30 August 1996/Accepted: 5 September 1996     

Determination of palladium by adsorptive stripping voltammetry

 Adsorptive accumulation of the Pd(II) complex with dimethylglyoxime was evaluated for stripping voltammetry with respect to different parameters. The sensitivity of the method and the linearity between the peak current and the concentration of Pd(II) depends on the ionic strength, the electrode area, the preconcentration time, the transport rate to the electrode, and the potential scan rate. The most appropriate medium was 0.1 mol/L acetate buffer between pH 3.5 and 4. Using 2 min of preconcentration at a 2.6 mm² electrode and the differential pulse mode, a detection limit of 0.05 μg/L Pd was achieved for liquid samples and 50 ng/g for solid samples. Different aqueous and solid samples were analysed and the recovery from biological and inorganic materials investigated. Received: 29 February 1996/Revised: 29 July 1996/Accepted: 1 August 1996     

Determination of lead traces in water and liqueurs by derivative atom trapping flame atomic absorption spectrometry

 A new method for the direct determination of lead traces using derivative atom trapping flame atomic absorption spectrometry (DAT-FAAS) with an improved water-cooled stainless steel trapping equipment in an air-acetylene flame was investigated. The optimum conditions concerning the sensitivity were studied. For a 1 min collection, the characteristic concentration (given as derivative absorbance of 0.0044) and the detection limit (3s) were 1.4 ng/mL and 0.27 ng/mL, respectively. This is 361 and 74-fold better than those of the conventional flame atomic absorption spectrometry (FAAS) and comparable to those of graphite furnace atomic absorption spectrometry (GFAAS). The detection limit and sensitivity of DAT-FAAS for a 3 min collection time were 2 and 3 orders of magnitude higher than those of conventional FAAS. The present method was applied to the determination of lead in water and liqueur samples with a recovery range of 94–108% and a relative standard deviation of 3.5–5.6%. Received: 10 January 1996/Revised: 9 December 1996/Accepted: 20 December 1996     

Determination of copper by anodic stripping voltammetry on a glassy carbon electrode using a continuous flow system

 A successful flow-through system was developed for trace analysis of copper using DPASV with a glassy-carbon electrode. Periodical chemical regeneration of the electrode with a 1 mol/L NaOH solution increased sensitivity and precision. The method was shown to be applicable with a detection limit of 0.56 μg/L, with a determination time of less than 7 min per measurement (without deaeration time). The drawback of the system is the 10 min deaeration time. The system gave an accuracy of 0.090±0.005% for a certified reference material of low alloy steel containing 0.090±0.004% Cu. Applicability to various fresh water samples with a Cu content between 1.57 and 13.11 μg/L with an RSD<2.36% is illustrated. Received: 11 March 1996/Revised: 1 July 1996/Accepted: 4 July 1996     

Determination of copper by anodic stripping voltammetry on a glassy carbon electrode using a continuous flow system

 A successful flow-through system was developed for trace analysis of copper using DPASV with a glassy-carbon electrode. Periodical chemical regeneration of the electrode with a 1 mol/L NaOH solution increased sensitivity and precision. The method was shown to be applicable with a detection limit of 0.56 μg/L, with a determination time of less than 7 min per measurement (without deaeration time). The drawback of the system is the 10 min deaeration time. The system gave an accuracy of 0.090±0.005% for a certified reference material of low alloy steel containing 0.090±0.004% Cu. Applicability to various fresh water samples with a Cu content between 1.57 and 13.11 μg/L with an RSD<2.36% is illustrated. Received: 11 March 1996/Revised: 1 July 1996/Accepted: 4 July 1996     

Characterization and quantification of persistent organic pollutants in fly ash from coal fueled thermal power stations in India

The burning of pulverized coal to produce energy for generation of electricity in thermal power plants results in huge quantity of coal ash of varying properties. In India the coal based thermal power plants have been the major source of power generation in the past and would continue for decades to come. Because of the increase in electricity production, the amount of ash produced will increase proportionally. Very few studies on characterization of organic constituents in fly ash from Indian thermal power plants have been reported in the literature. In the present study, the fly ashes generated from five thermal power stations from different parts of India were investigated regarding the elaboration of distribution pattern of persistent organic pollutants (POPs) such as PAHs and PCBs in them. The PAHs in the fly ash samples were identified and quantified using high pressure liquid chromatography (HPLC-UV) whereas the estimation of PCB congeners was carried out using gas chromatography (GC-ECD). Lower molecular weight (MW) PAHs, were found to be predominant in fly ash samples. The concentration of Benzo(a)Pyrene which is the most potent carcinogenic PAH, varied between 0.82 ng/g and 18.14 ng/g with a mean concentration of 9.02 ng/g. Among the PCB congeners, CB-77 is having higher toxicity value, the concentrations of which in the fly ash samples were in the range of 4.58 ng/g to 104.98 ng/g with a mean value of 62.53 ng/g.     

Determination of antimony in wine by hydride generation graphite furnace atomic absorption spectrometry

 A method was developed for the determination of Sb in wine by electrothermal atomic absorption spectrometry, based on preconcentration by hydride generation with collection directly in the graphite furnace. Thiourea was added for prereduction of Sb(V) to Sb(III). The hydride was directly generated from diluted wine. Palladium was used as modifier in the collection step; the overall efficiency of the hydride/trapping system was found to be 67%. Sb was determined in several samples of red wine; the concentrations found were in the range 0.6 to 5.7 μg/L Sb. The detection limit of the method was 39 pg Sb, corresponding to 0.13 μg/L Sb in wine when 0.3 mL wine was analyzed. Received: 3 November 1995/Revised: 22 February 1996/Accepted: 24 February 1996     

Analytical characterization of manganese in rainwater and snow samples

 Seven rain and 2 snow samples collected in October and November 1993 were analyzed by GFAAS. Manganese concentrations ranging from 0.3 to 11.3 μg/L were found. pH-values (4.04–4.89, mean 4.52) and redox potentials (528–665 mV, mean 581 mV) were additionally determined. This is important with respect to a qualified specification of Mn in atmospheric samples. A 0.45 μm-filtration of the samples prior to GFAAS-analysis showed the same manganese concentrations in the filtrate as in the unfiltered samples. Hence, the amount of solid Mn species in the investigated samples is negligible. For an examination of the oxidation state of Mn some investigations concerning the stability of Mn(III) were carried out. They indicated that Mn(III) is unstable under atmospheric conditions. For checking whether all the manganese in rainwater exists as Mn(II), a sensitive IC method for the detection of Mn(II) was developed. By adapting a photometric procedure based on the oxidation of Leucomalachite Green (LMG) to Malachite Green (MG) by permanganate (MnO^- ₄) to the IC-flow-through-system, a limit of determination of 1 μg/L Mn(II) could be achieved. A comparison of the IC measurements with GFAAS-results of the filtered samples showed agreeing results. Thus, manganese in rainwater and snow exists entirely as soluble Mn(II). Received: 24 May 1996/Revised: 7 July 1996/Accepted: 14 July 1996     

HPLC determination of collectors used for the flotation of heavy metal minerals

 A reversed-phase HPLC-method for the separation of mixtures of collectors for the flotation of heavy metal minerals is described. It is based on a Nucleosil 5C18 column, isocratic elution and UV-detection at 238 nm. The mobile phase is methanol-water-5% phosphoric acid (40:60:4, v/v). The method is applied to the determination of six collectors in aqueous solutions from flotation processes. The relative standard deviations are 1.6–3.2% in the concentration range 2–10 mg/L. The detection limits are 1 μg/L for 8-hydroxyquinoline, dimethylglyoxime and salicylic acid, 2 μg/L for salicylhydroxamic acid and 5 μg/L for benzenetriazol and salicylaldoxime, respectively. Received: 19 April 1996/Revised: 14 August 1996/Accepted: 23 August 1996     

Determination of antimony in wine by hydride generation graphite furnace atomic absorption spectrometry

 A method was developed for the determination of Sb in wine by electrothermal atomic absorption spectrometry, based on preconcentration by hydride generation with collection directly in the graphite furnace. Thiourea was added for prereduction of Sb(V) to Sb(III). The hydride was directly generated from diluted wine. Palladium was used as modifier in the collection step; the overall efficiency of the hydride/trapping system was found to be 67%. Sb was determined in several samples of red wine; the concentrations found were in the range 0.6 to 5.7 μg/L Sb. The detection limit of the method was 39 pg Sb, corresponding to 0.13 μg/L Sb in wine when 0.3 mL wine was analyzed. Received: 3 November 1995/Revised: 22 February 1996/Accepted: 24 February 1996     

Certification of the contents of five polychlorodibenzo-p-dioxins and six polychlorodibenzo furans in milk powder

 Preparation, homogeneity and stability studies of a natural milk powder material and subsequent certification of the mass fraction of five polychlorodi-benzo-p-dioxins (D48, D54, D66, D67, D70) and six polychlorodibenzo furans (F83, F94, F114, F118, F121, F130) are described. The material, CRM 607, is intended for use in the method validation and quality control of the complete analytical procedure for congener-specific determination of dioxins in milk powder and similar dairy products and was certified in an interlaboratory study for: 2,3,7,8-TCDD, 0.25 ng/kg; 1,2,3,7,8-PeCDD, 0.79 ng/kg; 1,2,3,4,7,8-HxCDD 0.42 ng/kg; 1,2,3,6,7,8-HxCDD, 0.98 ng/kg; 1,2,3,7,8,9-HxCDD, 0.34 ng/kg; 2,3,7,8-TCDF, 0.05 ng/kg; 1,2,3, 7,8-PeCDF, 0.054 ng/kg; 2,3,4,7,8-PeCDF, 1.81 ng/kg; 1,2,3,4,7, 8-HxCDF, 0.94 ng/kg; 1,2,3,6,7,8-HxCDF, 1.01 ng/kg and 2,3,4,6,7,8-HxCDF, 1.07 ng/kg. An indicative (non-certified) value was assigned to the mass fraction of the hepta- and octachlorinated congeners D73, D75, F131, F134, F135 and the HxCDF F124. Received: 26 November 1996 / Accepted: 5 February 1997     

Determination of tin in marine sediment slurries by electrothermal atomic absorption spectrometry using palladium-magnesium nitrate as chemical modifier

 A method was optimized for the determination of tin in slurries of marine sediment samples using palladium-magnesium nitrate as chemical modifier and Triton X-100 (0.1%) surfactant as stabilizer. To obtain a complete pyrolysis of the slurry sample, two charring steps were used, the first at 480 °C and the second at 1300 °C. The precision and accuracy of the method were studied using the Reference Material PACS-1 (marine sediment) from National Research Council Canada. The detection limit (LOD) was 57.6 μg kg^-1. The method was applied to the determination of tin in marine sediment samples from the Galicia coast. Received: 16 February 1996/Revised: 26 March 1996/Accepted: 12 April 1996     

Analytical characterization of manganese in rainwater and snow samples

 Seven rain and 2 snow samples collected in October and November 1993 were analyzed by GFAAS. Manganese concentrations ranging from 0.3 to 11.3 μg/L were found. pH-values (4.04–4.89, mean 4.52) and redox potentials (528–665 mV, mean 581 mV) were additionally determined. This is important with respect to a qualified specification of Mn in atmospheric samples. A 0.45 μm-filtration of the samples prior to GFAAS-analysis showed the same manganese concentrations in the filtrate as in the unfiltered samples. Hence, the amount of solid Mn species in the investigated samples is negligible. For an examination of the oxidation state of Mn some investigations concerning the stability of Mn(III) were carried out. They indicated that Mn(III) is unstable under atmospheric conditions. For checking whether all the manganese in rainwater exists as Mn(II), a sensitive IC method for the detection of Mn(II) was developed. By adapting a photometric procedure based on the oxidation of Leucomalachite Green (LMG) to Malachite Green (MG) by permanganate (MnO^- ₄) to the IC-flow-through-system, a limit of determination of 1 μg/L Mn(II) could be achieved. A comparison of the IC measurements with GFAAS-results of the filtered samples showed agreeing results. Thus, manganese in rainwater and snow exists entirely as soluble Mn(II). Received: 24 May 1996/Revised: 7 July 1996/Accepted: 14 July 1996     

Use of microwave plasma torch atomic emission spectrometry for the determination of silicon

 A method for the elimination of matrix effects was developed for the determination of trace amounts of silicon by microwave plasma torch atomic emission spectrometry (MPT-AES). The sample solution was introduced into the MPT with a pneumatic nebulizer (PN). When Ar was used as both carrier and support gas, a detection limit of 10.8 ng/ml was obtained. The precision was 4.2% (RSD). The characteristics of the emission spectrum of silicon in MPT was studied in detail. The interference of some concomitant cations with the silicon emission was eliminated by incorporation of a cation-exchange column into the flow injection system. The method has been applied to analyze some practical samples and the results obtained are satisfactory. Received: 23 October 1995/Revised: 16 April 1996/Accepted: 20 April 1996     

Optimization of the reduction of Se(VI) to Se(IV) in a microwave oven

 Parameters for the reduction of Se(VI) to Se(IV) in HCl medium by heating in a microwave oven have been optimized. The reduction resulted to be quantitative applying 100% power, corresponding to 600 W heating for 2 min in 6 mol/L or for 3 min in 4 mol/L HCl. The behavior of selenomethionine and selenocystine under the optimized reduction conditions was studied in order to evaluate a possible interference of these selenium species in the determination of Se(VI). The final determination of Se(IV), and Se(VI) were done by hydride generation-atomic absorption spectrometry. The analytical merits of the method are reported. The method was applied to the selective determination of Se(IV), and Se(VI) in spiked river and lake water. Received: 6 December 1996/Revised: 1 April 1997/Accepted: 3 April 1997