Triamidotriazacyclononane complexes of group 3 metals. Synthesis and crystal structures

Reaction of yttrium and lanthanide trichlorides (Ln = La, Eu, Yb) with 1 equiv of the trisodium salt of 1,4,7-tris(dimethylsilylaniline)-1,4,7-triazacyclononane (Na(3)[(SiMe(2)NPh)(3)-tacn](THF)(2)) gives good yields of the compounds [M[(SiMe(2)NPh)(3)-tacn]] (M = Y (1), Eu (3), Yb (4)) and [La[(SiMe(2)NPh)(3)-tacn](THF)] (2). Reduction of 3 with Na/Hg followed by recrystallization in the presence of diglyme yielded crystals of [Eu[(SiMe(2)NPh)(3)-tacn]][Na(diglyme)(2)] (5). Synthesis of the uranium(III) complex [U[(SiMe(2)NPh)(3)-tacn]] (6) is achieved by reaction of 1 equiv of Na(3)[(SiMe(2)NPh)(3)-tacn](THF)(2) with uranium triiodide. The U(IV) complexes, [U[(SiMe(2)NPh)(3)-tacn]X] (X = Cl (7); I (8)), were prepared via oxidation of 6 with benzyl chloride or I(2), but salt metathesis from UCl(4) provided a higher yield route for 7. The solid-state structures of 1-7 were determined by single-crystal X-ray diffraction. The ligand [(SiMe(2)NPh)(3)-tacn] generates a trigonal prismatic coordination environment for the metal center in the neutral complexes 1, 3, 4, and 6 and the ionic 5. In 2 the six nitrogen atoms of the ligand are in a trigonal prismatic configuration with the oxygen atom of the THF capping one of the triangular faces of the trigonal prism. In 7 the coordination geometry around the uranium atom is best described as bicapped trigonal bipyramidal.     

Ion pairing in Ti(IV) trisamidotriazacyclononane compounds

[Ti[N(Ph)SiMe2]3-tacn]X complexes (X = Cl, 1; I, 2; PF6, 3; BPh4, 4) were studied by NMR and electron absorption and emission methods, which showed that these compounds exist in bromobenzene and dichloromethane solutions as ion pairs. The significant modifications observed in the proton resonances of tacn in C6D5Br, which follow the sequence BPh(4-) > or = PF(6-) > or = I- approximately Cl-, are a qualitative indication of the strength of the interactions that depend on the anion. The reaction of 2 with LiNMe2 led to [Ti(NPh)[NPh(SiMe2)]2-tacn], 5, that forms upon attack of Me2N- at one SiMe2 group. The formation of 5 is discussed on the basis of the interactions identified in solution.     

Unusual reaction between (nitrile)Pt complexes and pyrazoles: substitution proceeds via metal-mediated nitrile-pyrazole coupling followed by elimination of the nitrile

The reaction of platinum(IV) complex trans-[PtCl4(EtCN)2] with pyrazoles 3,5-RR'pzH (R/R' = H/H, Me/H, Me/Me) leads to the formation of the trans-[PtCl4{NH=C(Et)(3,5-RR'pz)}2] (1-3) species due to the metal-mediated nitrile-pyrazole coupling. Pyrazolylimino complexes 1-3 (i) completely convert to pyrazole complexes cis-[PtCl4(3,5-RR'pzH)2] by elimination of EtCN upon reflux in a CH2Cl2 solution or upon heating in the solid state; (ii) undergo exchange at the imino C atom with another pyrazole different from that contained in the pyrazolylimino ligand. The reaction of trans-[PtIICl2(EtCN)2] and 3,5-RR'pzH, conducted under conditions similar to those for trans-[PtIVCl4(EtCN)2], is much less selective, and the composition of the products strongly depends on the pyrazole employed: (a) with pzH, the reaction gives a mixture of three products, i.e., [PtCl2NH=C(Et)pz-kappa2N,N}] (4), [PtCl(pzH){NH=C(Et)pz-kappa2N,N}]Cl (5), and [Pt(pzH)2{NH=C(Et)pz-kappa2N,N}]Cl2 (6) (complexes 5 and 6 are rather unstable and gradually transform to trans-[PtCl2(pzH2] and [Pt(pzH)(4)]Cl(2) and free EtCN); (b) with 3,5-Me(2)pzH, the reaction leads to the formation of [PtCl2NH=C(Et)(3,5-Me2pz)-kappa2N,N}] (7) and [PtCl(3,5-Me2pzH)3]Cl (8); (c) in the case of asymmetric pyrazole 3(5)-MepzH, which can be added to EtCN and/or bind metal centers by any of the two nonequivalent nitrogen sites, a broad mixture of currently unidentified products is formed. The reduction of 1-3 with Ph3P=CHCO2Me in CHCl3 allows for the formation of corresponding platinum(II) compounds trans-[PtCl2{NH=C(Et)(3,5-RR'pz)}2] (9-11). Ligands NH=C(Et)(3,5-RR'pz) (12-14) were almost quantitatively liberated from 9-11 with 2 equiv of 1,2-bis-(diphenylphosphino)ethane in CDCl3, giving free imines 12-14 in solution and the precipitate of trans-[Pt(dppe)2](Cl)2. Pyrazolylimines 12-14 undergo splitting in CDCl3 solution at 20-25 degrees C for ca. 20 h to furnish the parent propiononitrile and the pyrazole 3,5-RR'pzH, but they can be synthetically utilized immediately after the liberation.     

Assembly of triangular trimetallic complexes by triamidophosphine ligands: spin-frustrated Mn2+ plaquettes and diamagnetic Mg2+ analogues with a combined through-space, through-bond pathway for 31P-31P spin-spin coupling

The reactions of 2 equiv of the ligand precursor P(CH2NHPh)3 or P[CH2NH-3,5-(CF3)2C6H3]3 with 3 equiv of Mn[N(SiMe3)2]2 provide high-yielding routes to the triangular trinuclear Mn(II) complexes [P(CH2NPh)3]2Mn3(THF)3.1.5THF and [P(CH2N-3,5-(CF3)2C6H3)3]2Mn3(THF)3. The solid-state structures of these paramagnetic complexes have approximate C3 symmetry. The magnetic moments from 300 to 1.8 K could be fit as a magnetic Jahn-Teller distorted isosceles triangle. These complexes exhibit spin frustration and possess an S = 1/2 ground state, as revealed by a plot of magnetization versus field at 1.8 K; at fields above 3.8 T, the occupation of an excited state with S = 3/2 becomes significant. The diamagnetic magnesium analogues were prepared by the reaction of the ligand precursor P(CH2NHPh)3, P[CH2NH-3,5-(CF3)2C6H3]3, or P(CH2NH-3,5-Me2C6H3)3 with nBu2Mg. The solid-state structures of [P(CH2NPh)3]2Mg3(THF)3.1.5THF and [P(CH2N-3,5-(CF3)2C6H3)3]2Mg3(THF)3 were determined. Solution 1H NMR spectroscopy was used to demonstrate that the solid-state structures are maintained in solution. The aryl group of the terminal amido donor exhibits slow rotation on the NMR time scale, and this was found to be an electronic effect. Solution 31P{1H} NMR spectroscopy revealed an unexpected 15 Hz coupling between phosphorus nuclei in these complexes. Calculations on a model complex using density functional theory demonstrates that this coupling occurs via a combined through-space, through-bond pathway.     

Monomeric lithium triazapentadienyl complexes

Treatment of 1,3,5-triazapentadienes [N{(C3F7)C(Mes)N}2]H and [N{(C3F7)C(Dipp)N}2]H (where Mes = 2,4,6-Me3C6H2; Dipp = 2,6-Pr(i)2C6H3) with n-BuLi in hexane, followed by the crystallization from hexane-THF mixture afforded the corresponding lithium 1,3,5-triazapentadienyl complexes as their THF solvates. X-Ray crystallographic analyses revealed that [N{(C3F7)C(Mes)N}2]Li(THF)2 and [N{(C3F7)C(Dipp)N}2]Li(THF) are monomeric in the solid state. [N{(C3F7)C(Mes)N}2]Li(THF)2 has a four-coordinate lithium center with a distorted tetrahedral geometry, and features a boat-shaped C2N3Li metallacycle. [N{(C3F7)C(Dipp)N}2]Li(THF) has a three-coordinate lithium atom and a planar, U-shaped C2N3 ligand backbone. The synthesis, solid-state structure, and 1H and 19F NMR spectroscopic details of [N{(C3F7)C(Mes)N}2]H are also reported.     

Synthesis and structures of monomeric magnesium, calcium, strontium, and barium amides involving the N,N-(2,4,6-trimethylphenyl)(trimethylsilyl)amido ligand

An extended family of aryl-substituted alkaline earth metal silylamides M{N(2,4,6-Me3C6H2)(SiMe3)}donor(n) was prepared using alkane elimination (Mg), salt elimination (Ca, Sr, Ba), and direct metalation (Sr, Ba). Three different donors, THF, TMEDA (TMEDA = N,N,N',N'-tetramethylethylenediamine), and PMDTA (PMDTA = N,N,N',N',N'-pentamethyldiethylenetriamine) were employed to study their influence on the coordination chemistry of the target compounds, producing monomeric species with the composition M{N(2,4,6-Me3C6H2)(SiMe3)}2(THF)2 (M = Mg, Ca, Sr, Ba), M{N(2,4,6-Me3C6H2)(SiMe3)}2TMEDA (M = Ca, Ba), and M{N(2,4,6-Me3C6H2)(SiMe3)}2PMDTA (M = Sr, Ba). For the heavier metal analogues, varying degrees of agostic interactions are completing the coordination sphere of the metals. Compounds were characterized using IR and NMR spectroscopy in addition to X-ray crystallography.     

Solid-state structure and solution behavior of eight-coordinate Sm(III) poly(pyrazolyl)borate compounds

[Sm(Tp(Me2)(2)(kappa(2)-S(2)CNR(2))] compounds (R = Et (1), Me (2); Tp(Me2) = HB(3,5-Me2pz)(3)) have been isolated from reaction of (R(2)NC(S)S)(2) with 2 equiv of [Sm(Tp(Me2)(2)]. Reductive cleavage of 2,2'-dipyridyl disulfide or 2,2'-dipyridyl diselenide by [Sm(Tp(Me2)(2)] afforded good yields of [Sm(Tp(Me2)(2)(kappa(2)-Y)] compounds (Y = 2-SC(5)H(4)N (3), 2-SeC(5)H(4)N (4)). 4 is the first selenopyridine complex of an f-block element. Sm(Tp(Me2)(2)(2-OC(5)H(4)N) (5) has been synthesized by salt metathesis of [Sm(Tp(Me2)(2)Cl] with the sodium salt of the 2-hydroxypyridine. The solid-state structures of 1, 3, 4, and 5 were determined by single-crystal X-ray diffraction analysis and revealed that the compounds are all eight-coordinate with dodecahedral geometry. The samarium atoms are bound in tridentate fashion to two pyrazolylborate ligands and in bidentate fashion by the third ligand. The solution behavior of the compounds was studied by (1)H NMR techniques. (1)H-(1)H exchange spectroscopy experiments give evidence for two distinct dynamic regimes occurring in solution.     

Synthesis of molybdenum complexes that contain "hybrid" triamidoamine ligands, [(hexaisopropylterphenyl-NCH2CH2)2NCH2CH2N-aryl]3-, and studies relevant to catalytic reduction of dinitrogen

In the Buchwald-Hartwig reaction between HIPTBr (HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3 = hexaisopropylterphenyl) and (H2NCH2CH2)3N, it is possible to obtain a 65% isolated yield of (HIPTNHCH2CH2)2NCH2CH2NH2. A second coupling then can be carried out to yield a variety of "hybrid" ligands, (HIPTNHCH2CH2)2NCH2CH2NHAr, where Ar = 3,5-Me2C6H3, 3,5-(CF3)2C6H3, 3,5-(MeO)2C6H3, 3,5-Me2NC5H3, 3,5-Ph2NC5H3, 2,4,6-i-Pr3C6H2, or 2,4,6-Me3C6H2. The hybrid ligands may be attached to Mo to yield [hybrid]MoCl species. From the monochloride species, a variety of other species such as [hybrid]MoN, {[hybrid]MoN2}Na, and {[hybrid]Mo(NH3)}+ can be prepared. [Hybrid]MoN2 species were prepared through oxidation of {[hybrid]MoN2}Na species with ZnCl2, but they could not be isolated. [Hybrid]Mo=N-NH species could be observed as a consequence of the protonation of {[hybrid]MoN2}- species, but they too could not be isolated as a consequence of a facile decomposition to yield dihydrogen and [hybrid]MoN2 species. Attempts to reduce dinitrogen catalytically led to little or no ammonia being formed from dinitrogen. The fact that no ammonia was formed from dinitrogen in the case of Ar = 3,5-Me2C6H3, 3,5-(CF3)2C6H3, or 3,5-(MeO)2C6H3 could be attributed to a rapid decomposition of intermediate [hybrid]Mo=N-NH species in the catalytic reaction, a decomposition that was shown in separate studies to be accelerated dramatically by 2,6-lutidine, the conjugate base of the acid employed in the attempted catalytic reduction. X-ray structures of [(HIPTNHCH2CH2)2NCH2CH2N{3,5-(CF3)2C6H3}]MoCl and [(HIPTNHCH2CH2)2NCH2CH2N(3,5-Me2C6H3)]MoN2}Na(THF)2 are reported.     

Unusual iron(III) ate complexes stabilized by Li-pi interactions

Several iron(III) complexes incorporating diamidoether ligands are described. The reaction between [Li(2)[RN(SiMe(2))](2)O] and FeX(3) (X=Cl or Br; R=2,4,6-Me(3)Ph or 2,6-iPr(2)Ph) form unusual ate complexes, [FeX(2)Li[RN(SiMe(2))](2)O](2) (2, X=Cl, R=2,4,6-Me(3)Ph; 3, X=Br, R=2,4,6-Me(3)Ph; 4, X=Cl, R=2,6-iPr(2)Ph) which are stabilized by Li-pi interactions. These dimeric iron(III)-diamido complexes exhibit magnetic behaviour characteristic of uncoupled high spin (S= 5/2 ) iron(III) centres. They also undergo halide metathesis resulting in reduced iron(II) species. Thus, reaction of 2 with alkyllithium reagents leads to the formation of iron(II) dimer [Fe[Me(3)PhN(SiMe(2))](2)O](2) (6). Similarly, the previously reported iron(III)-diamido complex [FeCl[tBuN(SiMe(2))](2)O](2) (1) reacts with LiPPh(2) to yield the iron(II) dimer [Fe[tBuN(SiMe(2))](2)O](2) but reaction with LiNPh(2) gives the iron(II) product [Fe(2)(NPh(2))(2)[tBuN(SiMe(2))](2)O] (5). Some redox chemistry is also observed as side reactions in the syntheses of 2-4, yielding THF adducts of FeX(2): the one-dimensional chain [FeBr(2)(THF)(2)](n) (7) and the cluster [Fe(4)Cl(8)(THF)(6)]. The X-ray crystal structures of 3, 5 and 7 are described.     

Mixed-transition-metal acetylides: synthesis and characterization of complexes with up to six different transition metals connected by carbon-rich bridging units

The synthesis and reaction chemistry of heteromultimetallic transition-metal complexes by linking diverse metal-complex building blocks with multifunctional carbon-rich alkynyl-, benzene-, and bipyridyl-based bridging units is discussed. In context with this background, the preparation of [1-{(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C}-3-{(tBu(2)bpy)(CO)(3)ReC[triple bond]C}-5-(PPh(2))C(6)H(3)] (10) (dppf = 1,1'-bis(diphenylphosphino)ferrocene; tBu(2)bpy = 4,4'-di-tert-butyl-2,2'-bipyridyl; Ph = phenyl) is described; this complex can react further, leading to the successful synthesis of heterometallic complexes of higher nuclearity. Heterotetrametallic transition-metal compounds were formed when 10 was reacted with [{(eta(5)-C(5)Me(5))RhCl(2)}(2)] (18), [(Et(2)S)(2)PtCl(2)] (20) or [(tht)AuC[triple bond]C-bpy] (24) (Me = methyl; Et = ethyl; tht = tetrahydrothiophene; bpy = 2,2'-bipyridyl-5-yl). Complexes [1-{(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C}-3-{(tBu(2)bpy)(CO)(3)ReC[triple bond]C}-5-{PPh(2)RhCl(2)(eta(5)-C(5)Me(5))}C(6)H(3)] (19), [{1-[(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C]-3-[(tBu(2)bpy)(CO)(3)ReC[triple bond]C]-5-(PPh(2))C(6)H(3)}(2)PtCl(2)] (21), and [1-{(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C}-3-{(tBu(2)bpy)(CO)(3)ReC[triple bond]C}-5-{PPh(2)AuC[triple bond]C-bpy}C(6)H(3)] (25) were thereby obtained in good yield. After a prolonged time in solution, complex 25 undergoes a transmetallation reaction to produce [(tBu(2)bpy)(CO)(3)ReC[triple bond]C-bpy] (26). Moreover, the bipyridyl building block in 25 allowed the synthesis of Fe-Ru-Re-Au-Mo- (28) and Fe-Ru-Re-Au-Cu-Ti-based (30) assemblies on addition of [(nbd)Mo(CO)(4)] (27), (nbd = 1,5-norbornadiene), or [{[Ti](mu-sigma,pi-C[triple bond]CSiMe(3))(2)}Cu(N[triple bond]CMe)][PF(6)] (29) ([Ti] = (eta(5)-C(5)H(4)SiMe(3))(2)Ti) to 25. The identities of 5, 6, 8, 10-12, 14-16, 19, 21, 25, 26, 28, and 30 have been confirmed by elemental analysis and IR, (1)H, (13)C{(1)H}, and (31)P{(1)H} NMR spectroscopy. From selected samples ESI-TOF mass spectra were measured. The solid-state structures of 8, 12, 19 and 26 were additionally solved by single-crystal X-ray structure analysis, confirming the structural assignment made from spectroscopy.     

Synthesis of amidolanthanides with new chiral biaryl-based NNO ligands and their use as catalysts for enantioselective hydroamination/cyclization

A new series of amidolanthanides have been prepared from the reactions between Ln[N(SiMe3)2]3 and the chiral NNO ligands, (S)-2-(pyrrol-2-ylmethyleneamino)-2'-hydroxy-6,6'-dimethyl-1,1'-biphenyl (2H2) and (S)-5,5',6,6',7,7',8,8'-octahydro-2-(pyrrol-2-ylmethyleneamino)-2'-hydroxy-1,1'-binaphthyl (3H2), which are synthesized from the condensation of pyrrole-2-carboxaldehyde with 1 equiv of (S)-2-amino-2'-hydroxy-6,6'-dimethyl-1,1'-biphenyl or (S)-5,5',6,6',7,7',8,8'-octahydro-2-amino-2'-hydroxy-1,1'-binaphthyl, in the presence of molecular sieves at 70 degrees C, respectively. Treatment of 2H2 with 1 equiv of Ln[N(SiMe3)2]3 (Ln=Sm, Yb) in toluene under reflux, followed by recrystallization from a toluene solution, gives the dimeric amido complexes, {2-SmN(SiMe3)2}2.0.5C7H8 (6.0.5C7H8) and {2-YbN(SiMe3)2} 2.1.5C7H8(8.1.5C7H8), in good yields. While under similar reaction conditions, the reaction of 2H2 with 1 equiv of Y[N(SiMe3)2]3 leads to the isolation of a mixture of {2-YN(SiMe3)2}2 (7a) and {(2)2Y}Y[N(SiMe3)2]2(7b) in 82% total yield; the reaction of 3H2 with 1 equiv of Ln[N(SiMe3)2]3 (Ln=Y, Yb) gives the trinuclear complexes, {(3)2Ln}2LnN(SiMe3) 2.1.5C7H8 (Ln=Y(9.1.5C7H8), Yb(10.1.5C7H8)), in good yields. All compounds have been characterized by various spectroscopic techniques and elemental analyses. The solid-state structures of compounds 2H2 and 6- 10 have been further confirmed by X-ray diffraction analyses. Complexes 6- 9 are active catalysts for the asymmetric hydroamination/cyclization of aminoalkenes, affording cyclic amines in good yields with moderate ee values.     

Amino-functionalised diarylphosphide complexes of the alkali metals and lanthanum

The secondary phosphines Ar(C6H4-2-CH2NMe2)PH [Ar = mes (3), Tripp (4)] may be isolated in good yields from reactions between Li(C6H4-2-CH2NMe2) and the respective dichlorophosphine, followed by reduction with LiAlH4 [mes = 2,4,6-Me3C6H2, Tripp = 2,4,6-Pri3C6H2]. Metalation of either 3 or 4 with BunLi gives the corresponding lithium compound; the lithium derivative of 3 was isolated as the separated ion pair complex [Li(12-crown-4)2][(mes)(C6H4-2-CH2NMe2)P].THF (5). The lithium complexes Ar(C6H4-2-CH2NMe2)PLi undergo metathesis reactions with either NaOBut or KOBut to give the heavier alkali metal phosphides {Ar(C6H4-2-CH2NMe2)P}M.1/2OEt2 [Ar = mes, M = Na (8), K (9); Ar = Tripp, M = K (10)]. Metathesis reactions between 9 and LaI3(THF)4 give only intractable products; in contrast, a metathesis reaction between 10 and LaI3(THF)4 yields the heteroleptic complex {(Tripp)(C6H4-2-CH2NMe2)P}2LaI (11). Compound 11 reacts cleanly with K{N(SiMe3)2} to give {(Tripp)(C6H4-2-CH2NMe2)P}2La{N(SiMe3)2} (14). Compounds 3-5, 8-11 and 14 have been characterised by multi-element NMR spectroscopy; in addition, compounds 5, 11 and 14 have been studied by X-ray crystallography.     

蝎型钒氧苯甲酸配合物的合成、结构及量化计算

设计合成了两种以聚吡唑硼酸盐、苯甲酸为配体的钒氧配合物VO[HB(pz)3](pzH)(C6H5COO)(1)和VO[HB(3,5-Me2pz)3](3,5-Me2pzH)(C6H5COO)(2)((HB(pz)3: 聚吡唑硼酸钠盐; pzH: 吡唑; HB(3,5-Me2pz)3: 聚甲基吡唑硼酸钠盐; 3,5-Me2pzH: 3,5-二甲基吡唑). 通过元素分析、红外光谱和X射线单晶衍射方法对配合物进行了表征. 并结合从头计算结果进一步分析了配合物的稳定性及分子中配键的共价特征. 分析结果表明, 配合物2的稳定性大于配合物1, 中心钒原子周围的价键类型都属于共价键范畴, 键序分析结果与晶体结构测定的键长结果是一致的.     

Thermally induced two-step, two-site incomplete 6A1<-->2T2 crossover in a mononuclear iron(III) phenolate-pyridyl Schiff-base complex: a rare crystallographic observation of the coexistence of pure S=5/2 and 1/2 metal centers in the asymmetric unit

The six-coordinate mononuclear iron(III) complexes [Fe(salpm)2]ClO(4).0.5EtOH, [Fe(salpm)2]Cl, [Fe{(3,5-tBu2)-salpm}2]X (X=ClO4- or Cl-), and [Fe{(3,5-tBu2)-salpm}2]NO(3).2H2O [Hsalpm=N-(pyridin-2-ylmethyl)salicylideneamine; H(3,5-tBu2)-salpm=N-(pyridin-2-ylmethyl)-3,5-di-tert-butylsalicylideneamine] have been synthesized and isolated in crystalline form; their chemical identities have been ascertained by elemental analyses, FAB mass spectrometry, and infrared spectroscopy. The room-temperature effective magnetic moments [(8chiMT)1/2 approximately 5.85-5.90 microB] of these complexes are consistent with the high-spin (S=5/2) ground state. These complexes are intensely colored on account of the strong ppi-->dpi* LMCT visible absorptions. Definitive evidence for the structures of [Fe(salpm)2]ClO(4).0.5EtOH and [Fe{(3,5-tBu2)-salpm}2]NO(3).2H2O has been provided by single-crystal X-ray crystallography. The monomeric complex cations in both compounds comprise two uninegative phenolate-pyridyl tridentate Schiff-base ligands coordinated meridionally to the iron(III) to afford a distorted octahedral geometry with a trans,cis,cis-[FeO2N4] core. Whereas [Fe(salpm)2]ClO(4).0.5EtOH undergoes a thermally induced 6A1<-->2T2 crossover, [Fe{(3,5-tBu2)-salpm}2]NO(3).2H2O retains its spin state in the solid state down to 5 K. However, EPR spectroscopy reveals that the latter complex does exhibit a spin transformation in solution, albeit to a much lesser extent than does the former. The spin crossover in [Fe(salpm)2]ClO(4).0.5EtOH has resulted in an unprecedented crystallographic observation of the coexistence of high-spin and low-spin iron(III) complex cations in equal proportions around 100 K. At room temperature, the two crystallographically distinct ferric centers are both high spin; however, one [Fe(salpm)2]+ complex cation undergoes a complete spin transition over the temperature range approximately 200-100 K, whereas the other converts very nearly completely between 100 and 65 K; approximately 10% of the complex cations in [Fe(salpm)2]ClO(4).0.5EtOH remain in the high-spin state down to 5 K.     

Molybdenum triamidoamine complexes that contain hexa-tert-butylterphenyl, hexamethylterphenyl, or p-bromohexaisopropylterphenyl substituents. An examination of some catalyst variations for the catalytic reduction of dinitrogen

Three new tetramines, (ArNHCH(2)CH(2))(3)N, have been synthesized in which Ar = 3,5-(2,4,6-t-Bu(3)C(6)H(2))(2)C(6)H(3) (H(3)[HTBTN(3)N]), 3,5-(2,4,6-Me(3)C(6)H(2))(2)C(6)H(3) (H(3)[HMTN(3)N]), or 4-Br-3,5-(2,4,6-i-Pr(3)C(6)H(2))(2)C(6)H(2) (H(3)[pBrHIPTN(3)N]). The diarylated tetramine, [3,5-(2,4,6-t-Bu(3)C(6)H(2))(2)C(6)H(3)NHCH(2)CH(2)](2)NCH(2)CH(2)NH(2), has also been isolated, and the "hybrid" tetramine [3,5-(2,4,6-t-Bu(3)C(6)H(2))(2)C(6)H(3)NHCH(2)CH(2)](2)NCH(2)CH(2)NH(4-t-BuC(6)H(4)) has been prepared from it. Monochloride complexes, [(TerNCH(2)CH(2))(3)N]MoCl, have been prepared, as well as a selection of intermediates that would be expected in a catalytic dinitrogen reduction such as [(TerNCH(2)CH(2))(3)N]Mo[triple bond]N and [[(TerNCH(2)CH(2))(3)N]Mo(NH(3))][BAr'(4)] (Ter = HTBT, HMT, or pBrHIPT and Ar' = 3,5-(CF(3))(2)C(6)H(3))). Intermediates that contain the new terphenyl-substituted ligands are then evaluated for their efficiency for the catalytic reduction of dinitrogen under conditions where analogous [HIPTN(3)N]Mo species give four turnovers to ammonia under "standard" conditions with an efficiency of approximately 65%. Only [pBrHIPTN(3)N]Mo compounds are efficient catalysts for dinitrogen reduction. The reasons are explored and discussed.     

Synthesis, structures, and kinetics of mixed-donor amido-amino-siloxo ligands from symmetrical diamidosilyl ether ligands via a retro-brook rearrangement

Deprotonation of the new (R = propyl, 3,5-Me(2)Ph) and previously prepared (R = 2,4,6-Me(3)Ph, 2,6-(i)Pr(2)Ph, 3,5-(CF(3))(2)Ph) symmetrical diamidosilyl ether ligand precursors {[RNHSiMe(2)](2)O} with 2 equiv of nBuLi in THF resulted in a new class of mixed-donor amido-amino-siloxo ligands of the form {RNLiSiMe(2)N(R)SiMe(2)OLi} (R= propyl (1c), 3,5-Me(2)Ph (2c), 2,4,6-Me(3)Ph (3c), 2,6-(i)Pr(2)Ph (4c), 3,5-(CF(3))(2)Ph (5c)) in one-step and high yield via a retro-Brook-type rearrangement mechanism. Ligands 1c, 3c, and 4c have been structurally characterized in the presence and absence of THF/ether donor solvents and exhibited a range of aggregated structures with ring-laddering, ring-stacking, and cubane motifs; higher-nuclearity clusters for base-free systems were observed for 1c and 4c. 1H, (7)Li, and selected (13)C{(1)H} NMR spectra in THF-d(8) and toluene-d(8) are described; the (7)Li data are indicative of intramolecular fluxional behavior as a function of temperature but do not shed light on the nuclearity of the salts in solution. Reaction kinetics were investigated by variable-temperature 1H NMR spectroscopy and showed that the rate of rearrangement reactions increases with decreasing steric hindrance and with increasing electron-donating ability of the R substituents, with tau(1/2) values ranging from 5.7 x 10(1) to 1.5 x 10(8) s for 2c and 5c, respectively.     

Crystal structure of bis[1-{(3,5-dimethyl-1H-pyrazol-1-yl)methyl}-3,5-dimethyl-1H-pyrazol-2-ium] hexachlorouranate(IV): [H2C(3,5-Me2pz)(3,5-Me2pzH)]2[UCl6]

Journal of Structural Chemistry - The X-ray diffraction study of a single crystal with the composition [H2C(3,5-Me2pz)(3,5-Me2pzH)]2[UCl6] (1) is performed. This compound is the product of an...     

BiPh3--a convenient synthon for heavy alkaline-earth metal amides

Environmentally friendly, commercially available BiPh(3) reacts with heavy alkaline-earth metals (Ae) and bulky trimethylsilylamines to give the corresponding amides [Ae{N(SiMe(3))(R)}(2)(thf)(n)] (R = SiMe(3), 2,4,6-Me(3)C(6)H(2), 2,6-(i)Pr(2)C(6)H(3)) in good yields, providing proof of concept for a general synthetic method.     

Reactivity at the beta-diketiminate ligand Nacnac- on titanium(IV) (Nacnac- = [Ar]NC(CH3)CHC(CH3)N[Ar], Ar = 2,6-[CH(CH3)2]2C6H3). Diimine-alkoxo and bis-anilido ligands stemming from the Nacnac- skeleton

The reaction of ketene OCCPh(2) with the four-coordinate titanium(IV) imide (L(1))Ti[double bond]NAr(OTf) (L(1)(-) = [Ar]NC(CH(3))CHC(CH(3))N[Ar], Ar = 2,6-[CH(CH(3))(2)](2)C(6)H(3)) affords the tripodal dimine-alkoxo complex (L(2))Ti[double bond]NAr(OTf) (L(2)(-) = [Ar]NC(CH(3))CHC(O)[double bond]CPh(2)C(CH(3))N[Ar]). Complex (L(2))Ti[double bond]NAr(OTf) forms from electrophilic attack of the beta-carbon of the ketene on the gamma-carbon of the Nacnac(-) NCC(gamma)CN ring. On the contrary, nucleophiles such as LiR (R(-) = Me, CH(2)(t)Bu, and CH(2)SiMe(3)) deprotonate cleanly in OEt(2) the methyl group of the beta-carbon on the former Nacnac(-) backbone to yield the etherate complex (L(3))Ti[double bond]NAr(OEt(2)), a complex that is now supported by a chelate bis-anilido ligand (L(3)(2)(-) = [Ar]NC(CH(3))CHC(CH(2))N[Ar]). In the absence of electrophiles or nucleophiles, the robust (L(1))Ti[double bond]NAr(OTf) template was found to form simple adducts with Lewis bases such as CN(t)Bu or NCCH(2)(2,4,6-Me(3)C(6)H(2)). Complexes (L(2))Ti[double bond]NAr(OTf), (L(3))Ti[double bond]NAr(OEt(2)), and the adducts (L(1))Ti[double bond]NAr(OTf)(XY) [XY = CN(t)Bu and NCCH(2)(2,4,6-Me(3)C(6)H(2))] were structurally characterized by single-crystal X-ray diffraction studies.     

Synthesis, structural characterization, reactivity, and thermal stability of [eta(5):sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2)

Reaction of [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]TiCl(NMe2) (1) with 1 equiv of PhCH2K, MeMgBr, or Me3SiCH2Li gave corresponding organotitanium alkyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2) (R = CH2Ph (2), CH2SiMe3 (4), or Me (5)) in good yields. Treatment of 1 with 1 equiv of n-BuLi afforded the decomposition product {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe)(mu:sigma-CH2NMe) (3). Complex 5 slowly decomposed to generate a mixed-valence dinuclear species {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe2)(mu:sigma-CH2NMe) (6). Complex 1 reacted with 1 equiv of PhNCO or 2,6-Me2C6H3NC to afford the corresponding monoinsertion product [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-OC(NMe2)NPh] (7) or [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-C(NMe2)=N(2,6-Me2C6H3)] (8). Reaction of 4 or 5 with 1 equiv of R'NC gave the titanium eta(2)-iminoacyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(NMe2)[eta(2)-C(R)=N(R')] (R = CH2SiMe3, R' = 2,6-Me2C6H3 (9) or tBu (10); R = Me, R' = 2,6-Me2C6H3 (11) or tBu (12)). The results indicated that the unsaturated molecules inserted into the Ti-N bond only in the absence of the Ti-C(alkyl) bond and that the Ti-C(cage) bond remained intact. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Molecular structures of 2, 3, 6-8, and 10-12 were further confirmed by single-crystal X-ray analyses.