手性配体交换毛细管电泳在氨基酸手性分析中的应用研究进展

氨基酸的手性分析在生命科学中具有重要的研究意义。手性配体交换毛细管电泳法作为常用的氨基酸的手性分析方式之一,具有高效、快速、样品迁移顺序可调等优点,引起了研究者们极大的兴趣。本文主要综述了近年来手性配体交换毛细管电泳法在氨基酸的手性分析中的应用研究进展。     

Exploiting thermodynamic data to optimize the enantioseparation of underivatized amino acids in ligand exchange capillary electrophoresis

Stereoselective amino acid analysis has increasingly moved into the scope of interest of the scientific community. In this work, we report a study on the chiral separation of underivatized d,l-His by ligand exchange capillary electrophoresis (LECE), utilizing accurate ex ante calculations. This has been obtained by the addition to the background electrolytes (BGE) of NaClO₄ which renders the separations “all in solution processes”, allowing to accurately calculate in advance the concentrations of the species present in solution and to optimize the system performances. To this aim, the formation of ternary complexes of Cu²⁺ ion and l-lysine (l-Lys) or l-ornithine (l-Orn) with l- and d-histidine (His), and histamine (Hm) have been studied by potentiometry and calorimetry at 25 °C and with 0.1 mol dm^?3 (KNO₃) in aqueous solution. The ternary species [Cu(L)(l-His)H]⁺ and [Cu(L)(d-His)H]⁺ (where L?=?l-Lys or l-Orn) show a slight but still detectable stereoselectivity, and the determination of ΔH° and ΔS° values allowed the understanding of the factors which determine this phenomenon. The stereoselectivity showed by the protonated ternary species has been exploited to chirally separate d,l-His in LECE, by using the binary complexes of copper(II) with l-Lys or l-Orn as background electrolytes added with the appropriate amounts of NaClO₄.

Chiral ligand exchange capillary electrophoresis using borate anion as a central ion

Native DL-pantothenic acid, having a 1,3-diol structure, was chirally resolved by ligand exchange capillary electrophoresis using (S)-3-amino-1,2-propanediol as a chiral selector and the borate anion as a central ion. The optimum conditions for both high resolution and short migration time of DL-pantothenic acid were found to be 200 mM (S)-3-amino-1,2-propanediol and 200 mM borate buffer (pH 9.2) containing 15% methanol with an applied voltage of +25 kV at 20 degrees C, using direct detection at 200 nm. With this system, the resolution (Rs) of racemic pantothenic acid was approximately 1.7. When (S)-1,2-propanediol, (S)-1,2,3-propanetriol, (S)-1,3-butanediol or (S)-1-amino-2-propanol were used as chiral ligand instead of (S)-3-amino-1,2-propanediol, DL-pantothenic acid was not enantioseparated. When borate was replaced with Tris or butylborate, no chiral separation was achieved. Therefore, the ionic interaction between the amino and carboxyl groups of the ternary complex may play an important role in the enantioseparation of DL-pantothenic acid by the proposed CE system.     

Mechanism of change in enantiomer migration order of enantioseparation of tartaric acid by ligand exchange capillary electrophoresis with Cu(II) and Ni(II)-D-quinic acid systems

The mechanism of change in the enantiomer migration order (EMO) of tartarate on ligand exchange CE with Cu(II)- and Ni(II)-D-quinic acid systems was investigated thoroughly by circular dichroism (CD) spectropolarimetry. The (13) C NMR spectra of solutions containing D-quinate (pH 5.0) with Cu(II) or Ni(II) revealed the coordination of carboxylate and hydroxyl groups on D-quinate. The D-quinic acid concentration dependence of the CD spectra at a fixed Cu(II) concentration at pH 5.0 indicates that the 1:1, 1:2 and 1:3 Cu(II)-D-quinate complexes were formed with an increase in the concentration of D-quinic acid. The CD spectral behavior revealed that D-tartarate is selectively coordinated to the 1:1 complex to give the 1:1:1 Cu(II)-D-quinate-D-tartarate ternary complex while L-tartarate is selectively bound to the 1:2 and 1:3 complexes to form the 1:2:1 ternary complex. In the Ni(II)-D-quinic acid system, it became apparent that the 1:2 Ni(II)-D-quinate complex is mainly formed in the wide range of D-quinic acid concentration at pH 5.0 and D-tartarate is selectively coordinated to the 1:2 complex to form the 1:2:1 ternary complex. The change in EMO of tartarate on ligand exchange CE was explainable by the change in coordination selectivity for D- and L-tartarates in the Cu(II)- and Ni(II)-D-quinic acid systems depending on the compositions of the complexes formed in BGE.     

Electrochromatographic enantioseparation using chiral ligand exchange monolithic sol-gel column

This paper describes the development of a monolithic sol-gel column modified with l-hydroxyproline as a ligand exchange chiral stationary phase. It has been demonstrated that the monolithic chiral stationary phase can be used for the enantioseparation of dansyl amino acids, free amino acids, hydroxy acids, and dipeptides by capillary electrochromatography and micro-liquid chromatography. The recommended mobile phase was acetonitrile/0.50 mM Cu(Ac)₂-50 mM NH₄Ac (7:3) adjusted to pH 6.5. The characteristics of the monolithic column using hydroxyproline as chiral selector in CEC have been discussed.     

Chiral separation of sympathomimetics by ligand exchange capillary electrophoresis.

A rapid and simple approach to the chiral separation of sympathomimetic drugs with amino alcohol structure by ligand exchange capillary electrophoresis is described. An N-(2-hydroxyoctyl)-L-4-hydroxyproline/copper(II) complex is used as chiral selector. Thirteen sympathomimetics were resolved, nine with baseline resolution. The influence of pH and composition of the electrolyte on resolution was investigated. The optimal pH for complexation of these amino alcohols was found to be 12.     

A novel chiral ligand exchange capillary electrophoresis system with amino acid ionic liquid as ligand and its application in screening d-amino-acid oxidase inhibitors

A novel amino acid ionic liquid (AAIL) with l-ornithine (l-Orn) as anion was successfully synthesized, and subsequently applied as an available chiral ligand coordinated with Zn(ii) in a chiral ligand exchange capillary electrophoresis (CLE-CE) system for the enantioseparation of dansyl amino acids (Dns-d,l-AAs). The influence of key parameters, such as buffer pH, concentration ratio of Zn(ii) to ligand and complex concentration, was investigated in detail. Eleven pairs of Dns-d,l-AAs enantiomers were baseline separated and three pairs were partly separated under the optimum conditions. For exploring its potential application, the quantitative features of this proposed method were studied. Good linearity (r(2) = 0.999) and favorable repeatability (RSD ≤ 3.4%) were obtained by using Dns-d,l-Met as the test analyte. Finally, this method was employed to investigate the inhibition efficiency of d-amino acid oxidase (DAAO) inhibitors, which may pave a new way for the high-throughput screening of enzyme inhibitors and relevant drug discovery.     

Enantioseparation of underivatised amino acids by ligand exchange capillary electrophoresis in a counter-electroosmotic mode

Enantiomer separations of underivatised amino acids were carried out by using ligand exchange capillary electrophoresis (LECE). Chiral discrimination is based on the formation of ternary complexes between copper(II), a chiral selector (L-proline or trans-4-hydroxy-L-proline) and an amino acid. All amino acids containing aromatic moieties or not were detected at 214 nm because of their interactions with copper(II). In order to reduce copper(II) adsorption onto capillary walls, we used hexadimethrine bromide to reverse the electroosmotic flow. Using this original strategy, the studied enantiomers migrated in the opposite direction of the anodic electroosmosis. After optimising the analytical conditions taking into account the chiral resolution and the detection sensitivity, we performed very satisfactory enantioseparations not only of aromatic amino acids (tryptophan, tyrosine, phenylalanine and histidine) but also of aliphatic amino acids (threonine, serine, isoleucine and valine). These enantioseparations were performed in a short analysis time at 35 °C. In order to rationalise the obtained results, we evaluated the complexation constants corresponding to the formed ternary complexes by capillary electrophoresis and we used molecular mechanics modelling.     

Direct chiral resolution of tartaric acid in food products by ligand exchange capillary electrophoresis using copper(II)-D-quinic acid as a chiral selector.

Chiral resolution of native DL-tartaric acid was performed by ligand-exchange capillary electrophoresis using copper(II)-D-quinic acid as a chiral selector. Factors affecting chiral resolution, migration time, and peak area of tartaric acid were studied. The running conditions for optimum separation of tartaric acid were found to be 1 mM copper(II) sulfate-10 mM D-quinic acid (pH 5.0) with an effective voltage of -15 kV at 30 degrees C, using direct detection at 250 nm, and resolution of racemic tartaric acid was approximately 1.3. With this system, chiral resolution of DL-tartaric acid in food products was conducted successfully.     

高效毛细管电泳法拆分芳香醇类化合物的研究

以磺化的环糊精为手性选择剂,采用毛细管电泳法对10种结构相近的芳香醇类化合物进行了手性拆分的研究.分离过程通过11次实验分别建立了10种手性醇对映体分离度的目标函数,考察了3个主要因素（溶液的pH、分离电压和手性选择剂浓度）对分离效率的影响.从分离度响应曲面图可得到最佳的分离条件,在选定的优化条件下,10种手性芳香醇在10 min内均得到了满意的拆分效果.     

Analysis of citrate-capped gold and silver nanoparticles by thiol ligand exchange capillary electrophoresis

We report on the capillary electrophoretic behavior of citrate-capped gold and silver nanoparticles in aqueous medium when applying a ligand-exchange surface reaction with thiols. Gold nanoparticles (AuNPs) and silver nanoparticles (AgNPs) of similar size (39?±?6 and 41?±?7 nm, respectively) and shape were synthesized, covered with a citrate shell, and characterized by microscopic and spectroscopic techniques. The analysis of these NPs by CE was accomplished by using a buffer solution (pH 9.7; 40 mM SDS, 10 mM CAPS; 0.1 % methanol) containing the anions of thioctic acid or thiomalic acid. These are capable of differently interacting with the surface of the AuNPs and AgNPs and thus introducing additional negative charges. This results in different migration times due to the formation of differently charged nanoparticles. Figure

Capillary electrophoretic behavior of citrate-capped gold and silver nanoparticles (NPs) in aqueous medium when applying a ligand-exchange surface reaction with thiols (thioctic and thiomalic acids), which introduces additional negative charges, has been studied     

Analysis of citrate-capped gold and silver nanoparticles by thiol ligand exchange capillary electrophoresis

We report on the capillary electrophoretic behavior of citrate-capped gold and silver nanoparticles in aqueous medium when applying a ligand-exchange surface reaction with thiols. Gold nanoparticles (AuNPs) and silver nanoparticles (AgNPs) of similar size (39 ± 6 and 41 ± 7 nm, respectively) and shape were synthesized, covered with a citrate shell, and characterized by microscopic and spectroscopic techniques. The analysis of these NPs by CE was accomplished by using a buffer solution (pH 9.7; 40 mM SDS, 10 mM CAPS; 0.1 % methanol) containing the anions of thioctic acid or thiomalic acid. These are capable of differently interacting with the surface of the AuNPs and AgNPs and thus introducing additional negative charges. This results in different migration times due to the formation of differently charged nanoparticles.

Capillary electrophoretic behavior of citrate-capped gold and silver nanoparticles (NPs) in aqueous medium when applying a ligand-exchange surface reaction with thiols (thioctic and thiomalic acids), which introduces additional negative charges, has been studied

     

Enantioseparation of tartaric acid by ligand‐exchange capillary electrophoresis using contactless conductivity detection

A method for the determination of tartaric acid enantiomers using CE with contactless conductivity detection has been developed. Cu(II) as a central metal ion together with l ‐hydroxyproline were used as a chiral selector, the BGE was composed of 7 mM CuCl_2, 14 mM trans‐4‐hydroxy‐l ‐proline, and 100 mM ε‐aminocaproic acid; the pH was adjusted to 5 by hydrochloric acid. Separation with a resolution of 1.9 was achieved in 9 min in a polyacrylamide‐coated capillary to suppress the EOF. Various counterions of the BGE were studied, and migration order reversal was achieved when switching from ε‐aminocaproic acid to l ‐histidine. With detection limits of about 20 μM, the method was applied to the analysis of wine and grape samples; only l ‐tartaric acid was found.     

Nonaqueous capillary electrophoresis using a titania-coated capillary

In this work, an ordered mesoporous titania film was introduced to coat a capillary by means of the sol-gel technique. Its electroosmotic flow (EOF) property was investigated in a variety of nonaqueous media (methanol, formamide and N,N'-dimethylformamide and mixtures of methanol and acetonitrile). The titania-coated capillary exhibited a distinctive EOF behavior, the direction and magnitude of which were strongly dependent on various parameters such as the solvent composition, apparent pH (pH*) and the electrolytes. The nonaqueous capillary electrophoresis separation of several alkaloids was investigated in the positively charged titania-coated capillary. Comparison of separation between coated and uncoated capillaries under optimal nonaqueous conditions was also carried out.     

Field-amplified on-line sample stacking for simultaneous enantioseparation and determination of some beta-blockers using capillary electrophoresis

A capillary electrophoresis method using carboxymethyl-beta-cyclodextrin as the chiral selector and mixture of methanol and ethanol as the organic additive was successfully developed for the simultaneous enantioseparation and determination of six beta-blockers, namely, carteolol, atenolol, sotalol, metoprolol, esmolol and propranolol in this paper. The most suitable running buffer for enantioseparation was found to be the solution of 20 mmol/L NaH(2)PO(4)-Na(2)HOP(4) (pH 5.5) containing 1.5% w/v carboxymethyl-beta-cyclodextrin, 5% v/v methanol and 5% v/v ethanol. Furthermore, field-amplified sample injection as an on-line sample stacking method was developed in order to increase the detection sensitivity. The experimental conditions for both simultaneous enantioseparation and the field-amplified sample injection method had been investigated in detail. Under the optimum conditions, the detection limits (defined as S/N=3) of this method were 0.01, 0.05, 0.05, 0.05, 0.05 and 0.5 microg /mL for (+/-) carteolol, (+/-) atenolol, (+/-) sotalol, (+/-) metoprolol, (+/-) esmolol and (+/-) propranolol, respectively, which were much lower than those of the conventional methods. The enhancement factors were greatly improved by 25-fold for the enantiomers of the beta-blockers except five-fold for (+/-) propranolol. Eventually, the proposed method has been applied for the analysis of human serum sample.     

Mass spectrometry detection as an innovative and advantageous tool in ligand exchange capillary electrophoresis

The copper(II) complex of a modified cyclodextrin, namely 6-mono-deoxy-6-[4-(2-aminoethyl)imidazolyl]-β-CD (CDmh), previously synthesized and characterized in our laboratory and already used as chiral selector for ligand exchange capillary electrophoresis (LECE) with optical detection, is investigated here in LECE using electrospray-mass spectrometry (ESI-MS) as the detection device. The potential of this hyphenated method is compared with the results previously obtained with optical detection by studying the chiral resolution of tryptophan racemate. Chiral separation conditions compatible with LECE-ESI-MS could be achieved based on the figures of merit obtained by LECE-UV. Interestingly, the values of LOD obtained by LECE-ESI-MS were significantly better than those obtained by LECE-UV and thus, ESI-MS detection seems to open new perspectives in chiral separations by LECE.     

Comparison of enantioseparation of amino acid derivatives in aqueous and mixed aqueous-organic media by capillary zone electrophoresis

The chiral separation of dansyl-amino acids has been performed by capillary zone electrophoresis using ?β-cyclodextrin as a chiral selector, urea as an additive and 2-propanol and methanol as organic modifiers. The enantiomeric separations of dansyl-amino acids were investigated in aqueous medium and compared with the separation in mixed aqueous-organic medium as background electrolytes. The separation conditions, (concentration of buffer, β-cyclodextrin, methanol, urea and the pH value of buffer) were optimized. In the absence of organic modifier, only five pairs of 8 separated dansyl-amino acids were resolved when run separately. A mixture of up to eight chiral amino acids can be baseline resolved in less than 19 min by β-cyclodextrin-modified capillary zone electrophoresis with a buffer of 60 mmol L^–1 H₃BO₃-KCl/40 mmol L^–1 NaOH (pH 9.0), 4 mol L^–1 urea, 100 mmol L^–1β-cyclodextrin and 10% (v/v) methanol. Received: 15 March 1999 / Revised: 10 May 1999 / Accepted: 12 May 1999     

Comparison of enantioseparation of amino acid derivatives in aqueous and mixed aqueous-organic media by capillary zone electrophoresis

The chiral separation of dansyl-amino acids has been performed by capillary zone electrophoresis using ¶β-cyclodextrin as a chiral selector, urea as an additive and 2-propanol and methanol as organic modifiers. The enantiomeric separations of dansyl-amino acids were investigated in aqueous medium and compared with the separation in mixed aqueous-organic medium as background electrolytes. The separation conditions, (concentration of buffer, β-cyclodextrin, methanol, urea and the pH value of buffer) were optimized. In the absence of organic modifier, only five pairs of 8 separated dansyl-amino acids were resolved when run separately. A mixture of up to eight chiral amino acids can be baseline resolved in less than 19 min by β-cyclodextrin-modified capillary zone electrophoresis with a buffer of 60 mmol L^–1 H₃BO₃-KCl/40 mmol L^–1 NaOH (pH 9.0), 4 mol L^–1 urea, 100 mmol L^–1β-cyclodextrin and 10% (v/v) methanol.     

Recent advancements in amino acid analysis using capillary electrophoresis

Recent advances in the analysis of amino acids using capillary electrophoresis are addressed. This area of research continues to receive increased attention as is evident from the 62 references reviewed. This review discusses current detection strategies including UV absorbance, laser-induced fluorescence, electrochemical, and others. Separation methodologies for both derivatized and underivatized amino acids are reviewed. Both direct and indirect enantiomeric resolution of amino acids are addressed. Applications utilizing capillary electrophoresis for the analysis of amino acids are discussed. This review covers literature published in 1997 and 1998.     

Chiral ionic liquids for enantioseparation of pharmaceutical products by capillary electrophoresis

A chiral ionic liquid (IL), S-[3-(chloro-2-hydroxypropyl)trimethylammonium] [bis((trifluoromethyl)sulfonyl)amide] (S-[CHTA](+)[Tf(2)N](-)), which can be easily and readily synthesized in a one-step process from commercially available reagents, can be successfully used both as co-electrolyte and as a chiral selector for CE. A variety of pharmaceutical products including atenolol, propranolol, warfarin, indoprofen, ketoprofen, ibuprofen and flurbiprofen, can be successfully and baseline separated with the use of this IL as electrolyte. Interestingly, while S-[CHTA](+)[Tf(2)N](-) can also serve as a chiral selector, enantioseparation cannot be successfully achieved with S-[CHTA](+)[Tf(2)N](-) as the only chiral selector. In the case of ibuprofen, a second chiral selector, namely a chiral anion (sodium cholate), is needed for the chiral separation. For furbiprofen, in addition to S-[CHTA](+)[Tf(2)N](-) and sodium cholate, a third and neutral chiral selector, 1-S-octyl-beta-d-thioglucopyranoside (OTG), is also needed. Due to the fact that the chirality of this chiral IL resides on the cation (i.e., -[CHTA](+)), and that needed additional chiral selector(s) are either chiral anion (i.e., cholate) or chiral neutral compound (OTG), the results obtained seem to suggest that additional chiral selector(s) are needed to provide the three-point interactions needed for chiral separations.