Dielectrophoresis of surface conductance modulated single-walled carbon nanotubes using catanionic surfactants

Dielectrophoresis has received considerable attention for separating nanotubes according to electronic types. Here we examine the effects of surface conductivity of semiconducting single walled carbon nanotubes (SWNT), induced by ionic surfactants, on the sign of dielectrophoretic force. The crossover frequency of semiconducting SWNT increases rapidly as the conductivity ratio between the particle and medium increases, leading to an incomplete separation of ionic surfactant suspended SWNT at an electric field frequency of 10 MHz. To reduce the conductivity ratio, the surface charge of SWNT is neutralized by an equimolar mixture of anionic surfactant sodium dodecyl sulfate (SDS) and cationic surfactant cetyltrimethylammonium bromide (CTAB), resulting in negative dielectrophoresis of semiconducting species at 10 MHz. A comparative Raman spectroscopy study shows a nearly complete separation of metallic SWNT.     

Charge transfer from metallic single-walled carbon nanotube sensor arrays

This paper explores the possibility of using arrays of metallic carbon nanotubes as sensors. Unlike their semiconducting counterparts, single-walled carbon nanotube arrays or networks that are dominated by metallic conduction pathways have not been investigated for their environmental sensitivity. In this work, we demonstrate transduction of molecular adsorption via charge transfer through predominantly metallic single-walled carbon nanotubes. Raman spectroscopy and electric field dependent transport confirm that signal transduction takes place through primarily large diameter metallic nanotubes. This unique signal transduction mechanism might have implications for novel sensors. The scaling of the signal with array impedance is well described using an irreversible binding model developed previously. The arrays have several advantages including a simple, two-electrode fabrication, rapid regeneration, and a responsivity that scales predictably and linearly with the number of adsorption sites. An array-assisted hydrolysis of reactive analytes is found to regenerate the nanotube surface from hydrolyzable species which include important organophosphate nerve agents.     

Controlling photochromism between fluoroalkyl end-capped oligomer/polyaniline and N,N'-diphenyl-1,4-phenylenediamine nanocomposites induced by UV-light-responsive titanium oxide nanoparticles

Debundling and selective dispersion of semiconducting single-walled carbon nanotubes (SWNTs) has been demonstrated using a neutral pH water soluble chitosan derivative, N-acetylated chitosan (NACHI), which is synthesized by controlled N-acetylation of chitosan using acetic anhydride. The SWNT-NACHI supernatant solution demonstrated semiconductor-enriched property owing to the preferential adsorption of N-groups of the NACHI on semiconducting nanotubes with a fairly weak charge transfer. The dispersion of nearly individualized SWNTs achieved by surface modification of nanotubes with a biocompatible polymer can be utilized for electronic and biomedical applications such as field effect transistor, biosensor, cell culture medium and SWNT-biomacromolecule hybrid materials.     

UV-light mediated decomposition of a polyester for enrichment and release of semiconducting carbon nanotubes

Purification of single-walled carbon nanotubes using conjugated polymers to selectively disperse either semiconducting or metallic nanotubes is effective and has received significant attention. However, the interaction between the conjugated polymer and the nanotube surface is very strong, making it difficult to remove the adsorbed polymer. Here, we report a poly(carbazole-co-terephthalate) polymer that is not only selective for semiconducting carbon nanotubes but can also be largely removed from the nanotube surface via irradiation with UV light. Irradiation of the polymer-nanotube dispersion causes degradation of ester linkages in the polymer backbone, effectively cutting the polymer into fragments that no longer bind strongly to the nanotube surface. Characterization of the electronic nature of the samples was carried out via the combination of absorption, Raman, and fluorescence spectroscopy. In addition, thermogravimetric analysis allowed determination of the amount of polymer left on the nanotube surface after irradiation and indicated that a large proportion of the polymer is removed. The reported methodology opens new possibilities for purification of semiconducting single-walled carbon nanotubes and their isolation from the polymeric dispersant.     

Probing the Selectivity of Azomethine Imine Cycloaddition to Single‐Walled Carbon Nanotubes by Resonance Raman Spectroscopy

Selective covalent surface modification of single‐walled carbon nanotubes (SWNTs) is of great importance to various carbon nanotube‐based applications as it might offer an alternative method for enriching metallic and semiconducting nanotubes. Herein, we report on the surface modification of SWNTs through 1,3‐dipolar cycloaddition of 3‐phenyl‐phthalazinium‐1‐olate, which is a stable and reactive azomethine imine. For this reaction, microwave heating was found to be more efficient than conventional and solvent‐free heating. The sensitivity of cycloaddition to the molecular structure of SWNTs was probed using resonance Raman spectroscopy with three different laser excitations. Based on the obtained results, azomethine imine addition to the surface of nanotubes is selective for metallic and large‐diameter semiconducting SWNTs. Thermogravimetric analysis coupled with mass spectrometry showed that fragments released at high temperatures corresponded to the phenylphthalazine group, thus confirming the covalent surface functionalization. Modified SWNTs were further characterized by X‐ray photoelectron and UV/Vis‐NIR spectroscopies.     

Raman spectroscopy of individual single-walled carbon nanotubes from various sources

Resonance Raman spectroscopy/microscopy was used to study individualized single-walled carbon nanotubes (SWNTs) both in aqueous suspensions as well as after spin-coating onto Si/SiO2 surfaces. Four different SWNT materials containing nanotubes with diameters ranging from 0.7 to 1.6 nm were used. Comparison with Raman data obtained for suspensions shows that the surface does not dramatically affect the electronic properties of the deposited tubes. Raman features observed for deposited SWNTs are similar to what was measured for nanotubes directly fabricated on surfaces using chemical vapor deposition (CVD) methods. In particular, individual semiconducting tubes could be distinguished from metallic tubes by their different G-mode line shapes. It could also be shown that the high-power, short-time sonication used to generate individualized SWNT suspensions does not induce defects in great quantities. However, (additional) defects can be generated by laser irradiation of deposited SWNTs in air, thus giving rise to an increase of the D-mode intensity for even quite low power densities (approximately 10(4) W/cm2).     

Probing chiral selective reactions using a revised Kataura plot for the interpretation of single-walled carbon nanotube spectroscopy

Raman spectroscopy on surfactant-dispersed, aqueous suspensions of single-walled carbon nanotubes is used to verify the energies of interband transitions and validate the spectral assignments of semiconducting and metallic nanotubes determined by spectrofluorimetry for the former and Raman excitation profiles for the latter. The results are compiled into an experimentally based mapping of transition versus nanotube diameter to revise those previously employed using single-electron theoretical treatments. Because this mapping provides the transitions associated with a precise chiral wrapping of a particular nanotube, it allows the monitoring of reaction pathways that are selective to the nanotube chirality vector. This is demonstrated using a model electron-transfer reaction of 4-chlorobenzenediazonium shown to be selective for metallic over semiconducting carbon nanotubes via charge-transfer stabilization of complexes at the surfaces of the former.     

Aqueous dispersion, surface thiolation, and direct self-assembly of carbon nanotubes on gold

We report the efficient aqueous dispersion of pristine HiPco single-walled carbon nanotubes (SWNTs) with ionic liquid (IL)-based surfactants 1-dodecyl-3-methylimidazolium bromide (1) and 1-(12-mercaptododecyl)-3-methylimidazolium bromide (2), the thiolation of nanotube sidewalls with 2, and the controlled self-assembly of positively charged SWNT-1,2 composites on gold. Optical absorption spectra and resonance Raman (RR) data of obtained aqueous SWNT-1,2 dispersions are consistent with debundled and noncovalently functionalized nanotubes whose electronic properties have not been disturbed. Additionally, the dispersion of pristine nanotube material with surfactants 1 and 2 leads to a high degree of purification from carbonaceous particles. The chiralities of the 14 smallest semiconducting HiPco SWNTs in resonance with Raman excitation at 1064 nm (1.165 eV) were determined in SWNT-2 aqueous dispersion using UV-vis-NIR and RR spectra. X-ray photoelectron spectroscopy (XPS) and surface-enhanced resonance Raman scattering (SERRS) spectroscopy of SWNT-2 submonolayers on gold verified the encapsulation of individualized SWNTs with IL surfactants, the cleavage of S-S disulfide bonds formed in aqueous SWNT-2 suspensions, and the direct chemisorption of the SWNT-2 composite on bare gold via the Au-S bond. Aqueous dispersions of SWNTs with IL-based surfactants add biofunctionality to carbon nanotubes by imparting the positive surface charge necessary for interactions with cell membranes. Our technique, which purifies pristine nanotube material and produces water-soluble, positively charged nanotubes with pendent surface-active thiol groups, may also be translated to other carbon nanotubes and carbon nanostructures. Self-assembled, positively charged submonolayers of SWNTs can be further used for applications in cell biology and sensor technology.     

Effects of KI encapsulation in single-walled carbon nanotubes by Raman and optical absorption spectroscopy

The effect of KI encapsulation in narrow (HiPCO) single-walled carbon nanotubes is studied via Raman spectroscopy and optical absorption. The analysis of the data explores the interplay between strain and structural modifications, bond-length changes, charge transfer, and electronic density of states. KI encapsulation appears to be consistent with both charge transfer and strain that shrink both the C-C bonds and the overall nanotube along the axial direction. The charge transfer in larger semiconducting nanotubes is low and comparable with some cases of electrochemical doping, while optical transitions between pairs of singularities of the density of states are quenched for narrow metallic nanotubes. Stronger changes in the density of states occur in some energy ranges and are attributed to polarization van der Waals interactions caused by the ionic encapsulate. Unlike doping with other species, such as atoms and small molecules, encapsulation of inorganic compounds via the molten-phase route provides stable effects due to maximal occupation of the nanotube inner space.     

Insights on charge transfer doping and intrinsic phonon line shape of carbon nanotubes by simple polymer adsorption

Doping of individual single-walled carbon nanotubes via noncovalent adsorption of polyethylenimine which converts p-type semiconducting nanotubes into n-type is examined by micro-Raman studies. Distinctively different responses are observed in metallic and in semiconducting nanotubes. Very little or no changes in the radial breathing and the disorder modes are observed upon polymer adsorption on semiconducting carbon nanotubes indicating noncovalent nature of this process. Tangential G-band spectral downshift of up to approximately 10 cm(-)(1) without line broadening is observed for semiconducting tubes suggesting similar magnitude of electron transfer as commonly observed in electrochemical doping with alkali metals. Strong diameter dependence is also observed and can be explained by thermal ionization of charge carriers with activation barrier that scales as the energy gap of the semiconducting nanotubes. In contrast, metallic nanotubes exhibit very different behavior with significant line broadening of the G-band and concurrent enhancement of the disorder mode. In certain cases, initially symmetric Lorentzian line shapes of the G-band features with narrow line widths similar to semiconducting tubes are converted to a broad, asymmetric Breit-Wigner-Fano line shape. Implications on the effects of electron injection and the local chemical environment on the intrinsic line shape of isolated carbon nanotubes are discussed.     

Tip-enhanced near-field optical microscopy of carbon nanotubes

We review recent experimental studies on single-walled carbon nanotubes on substrates using tip-enhanced near-field optical microscopy (TENOM). High-resolution optical and topographic imaging with sub 15 nm spatial resolution is shown to provide novel insights into the spectroscopic properties of these nanoscale materials. In the case of semiconducting nanotubes, the simultaneous observation of Raman scattering and photoluminescence (PL) is possible, enabling a direct correlation between vibrational and electronic properties on the nanoscale. So far, applications of TENOM have focused on the spectroscopy of localized phonon modes, local band energy renormalizations induced by charge carrier doping, the environmental sensitivity of nanotube PL, and inter-nanotube energy transfer. At the end of this review we discuss the remaining limitations and challenges in this field. Figure Tip-enhanced Raman scattering and photoluminescence spectroscopy with sub 15 nm spatial resolution provides novel insights into the electronic and vibronic properties of single-walled carbon nanotubes.     

Spectroelectrochemistry of carbon nanostructures.

This review is focused on charge-transfer reactions at carbon nanotubes and fullerenes. The spectroelectrochemistry of fullerenes deals with the spin states of fullerenes, the role of mono-anions and the reactivity of higher charged states in C60. The optical (Vis-NIR) spectroelectrochemistry of single-walled carbon nanotubes (SWNTs) follows changes in the allowed optical transitions among the Van Hove singularities. The Raman spectroelectrochemistry of SWNT benefits from strong resonance enhancement of the Raman scattering. Here, both semiconducting and metallic SWNTs are analyzed using the radial breathing mode (RBM) and G-modes as well as the second order (D, G') and intermediate frequency modes. Raman spectroelectrochemistry of SWNT allows the addressing of index-identified tubes and even single isolated nanotubes. Optical and Raman spectroelectrochemistry of fullerene peapods, C60@SWNT and C70@SWNT indicates effective shielding of the intratubular fullerene (peas). The most striking effect in the spectroelectrochemistry of peapods is the so-called "anodic Raman enhancement" of intratubular C60. Double-walled carbon nanotubes (DWNTs) give a specific spectroscopic response in Vis-NIR spectroelectrochemistry for the inner and the outer tube. They are better distinguishable by Raman spectroelectrochemistry which allows a precise tracing of the specific doping response of outer/inner tubes.     

Spectroscopic Characteristics of Differently Produced Single‐Walled Carbon Nanotubes

Single‐walled carbon nanotubes (SWNTs) synthesized with different methods are investigated by using multiple characterization techniques, including Raman scattering, optical absorption, and X‐ray absorption near edge structure, along with X‐ray photoemission by following the total valence bands and C 1s core‐level spectra. Four different SWNT materials (produced by arc discharge, HiPco, laser ablation, and CoMoCat methods) contain nanotubes with diameters ranging from 0.7 to 2.8 nm. The diameter distribution and the composition of metallic and semiconducting tubes of the SWNT materials are strongly affected by the synthesis method. Similar sp² hybridization of carbon in the oxygenated SWNT structure can be found, but different surface functionalities are introduced while the tubes are processed. All the SWNTs demonstrate stronger plasmon resonance excitations and lower electron binding energy than graphite and multiwalled carbon nanotubes. These SWNT materials also exhibit different valence‐band X‐ray photoemission features, which are considerably affected by the nanotube diameter distribution and metallic/semiconducting composition.     

Dimensional changes as a function of charge injection in single-walled carbon nanotubes

Motivated by the central importance of charge-induced dimensional changes for carbon nanotube electromechanical actuators, we here predict changes in nanotube length and diameter as a function of charge injection for armchair and zigzag nanotubes having different diameters. Density functional theory with periodic boundary conditions is used, which we show provides results consistent with experimental observations for intercalated graphites. Strain-versus-charge relationships are predicted from dimensional changes calculated with a uniform background charge ("jellium") for representing the counterions. These jellium calculations are consistent with presented calculations that include specific counterions for intercalated graphite, showing that hybridization between the ions and the graphite sheets is unimportant. The charge-strain relationships calculated with the jellium approximation for graphite and isolated single-walled nanotubes are asymmetric with respect to the sign of charge transfer. The dependence of nanotube strain on charge approaches that for a graphite sheet for intermediate-sized metallic nanotubes and for larger diameter semiconducting nanotubes. However, the strain-charge curves strongly depend on nanotube type when the nanotube diameter is small. This reflects both the dependence of the frontier orbitals for the semiconducting nanotubes on the nanotube type and the pi-sigma mixing when the nanotube diameter is small.     

Theoretical investigation of electromechanical effects for graphyne carbon nanotubes

We present a theoretical study of the electronic and mechanical properties of graphyne-based nanotubes (GNTs). These semiconducting nanotubes result from the elongation of one-third of the covalent interconnections of graphite-based nanotubes by the introduction of yne groups. The effect of charge injection on the dimensions of GNTs was investigated using tight-binding calculations. Low amounts of electron injection are predicted to cause qualitatively different responses for armchair and zigzag graphyne nanotubes. Although the behavior is qualitatively similar to the usual carbon nanotubes, the charge-induced strains are predicted to be smaller for the GNTs than for ordinary single walled carbon nanotubes.     

On the applicability of cluster models to study the chemical reactivity of carbon nanotubes

We have performed a comparative study on the reactivity of metallic and semiconducting nanotubes using infinite and finite models. Infinite models were created using periodic boundary conditions while finite ones were constructed by means of hydrogen terminated nanotubes sections. Cluster models systematically underestimate the reactivity of metallic single wall carbon nanotube (SWCNT)s. We have confirmed that metallic nanotubes are more reactive than semiconducting species, in disagreement with previous works. The differences can be attributed to the presence of an instability in the singlet ground state of the wavefunction corresponding to semiconducting nanotubes clusters. When lower electronic states of the pristine cluster are considered, semiconducting nanotubes become less reactive as compared with metallic SWCNTs. Particularly, if an antiferromagnetic solution is considered for the semiconducting (10,0) SWCNT cluster, it becomes less reactive than the (5,5) SWCNT, as observed for infinite models. Because semiconducting nanotubes are less reactive than metallic counterparts, their reaction energies converge faster to the values observed for graphene. For a 1.6-nm diameter semiconducting nanotube, the addition energy is comparable with graphene. Thus, semiconducting nanotubes with diameters larger than 1.6 nm are going to be as reactive as graphene and the effects of curvature will be unimportant.     

Raman spectroscopy and imaging of ultralong carbon nanotubes

Raman spectroscopy and confocal Raman imaging with 514 nm excitation was performed on recently developed ultralong carbon nanotubes grown by the "fast-heating" chemical vapor deposition (CVD) method. The ultralong nanotubes are found to consist of both semiconducting and metallic types, with spectra that are consistent with the nanotubes being single walled. Characterization of nanotube diameters shows that short nanotubes appearing near the sample catalyst region have a broader distribution than is observed for the ultralong nanotubes. The narrow diameter distribution is determined by uniformity of catalyst particle size and gives additional evidence for the proposed "kite" mechanism for long nanotube growth. Raman imaging was performed over large length scales (up to 140 microm). Imaging reveals the ultralong nanotubes to be of high quality, with a very low defect density. Variations in G-band frequencies and intensity demonstrate the occurrence of minor structural changes and variations in nanotube-substrate interaction along the length of the nanotubes. Evidence also demonstrates that larger structural changes resulting in a full chirality change can occur in these nanotube types to produce a metal-to-semiconductor intramolecular junction.     

Effect of substitutionally boron‐doped single‐walled semiconducting zigzag carbon nanotubes on ammonia adsorption

We investigate the binding of ammonia on intrinsic and substitutionally doped semiconducting single‐walled carbon nanotubes (SWCNTs) on the side walls using density functional calculations. Ammonia is found to be weakly physisorbed on intrinsic semiconducting nanotubes while on substitutional doping with boron its affinity is enhanced considerably reflected with increase in binding energies and charge transfer. This is attributed to the strong chemical interaction between electron rich nitrogen of ammonia and electron deficient boron of the doped SWCNT. On doping, the density of states are changed compared to the intrinsic case and additional levels are formed near the Fermi level leading to overlap of levels with that of ammonia indicating charge transfer. The doped SWCNTs thus are expected to be a potential candidate for detecting ammonia. © 2014 Wiley Periodicals, Inc.     

Selective interactions of porphyrins with semiconducting single-walled carbon nanotubes

A derivatized porphyrin with long alkyl chains, 5,10,15,20-tetrakis(hexadecyloxyphenyl)-21H,23H-porphine, is selective toward semiconducting single-walled carbon nanotubes (SWNTs) in presumably noncovalent interactions, resulting in significantly enriched semiconducting SWNTs in the solubilized sample and predominantly metallic SWNTs in the residual solid sample according to Raman, near-IR absorption, and bulk conductivity characterizations.     

Water-soluble full-length single-wall carbon nanotube polyelectrolytes: preparation and characterization

HiPco single-wall carbon nanotubes (SWNTs) have been noncovalently modified with ionic pyrene and naphthalene derivatives to prepare water-soluble SWNT polyelectrolytes (SWNT-PEs), which are analogous to polyanions and polycations. The modified nanotubes have been characterized with UV-vis-NIR, fluorescence, Raman and X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The nanotube-adsorbate interactions consist of pi-pi stacking interactions between the aromatic core of the adsorbate and the nanotube surface and specific contributions because of the substituents. The interaction between nanotubes and adsorbates also involves charge transfer from adsorbates to SWNTs, and with naphthalene sulfonates the role of a free amino group was important. The ionic surface charge density of the modified SWNTs is constant and probably controlled by electrostatic repulsion between like charges. The linear ionic charge density of the modified SWNTs is similar to that of common highly charged polyelectrolytes.