NMR studies of water in polyimide films

Commercial polyimide films containing up to ～ 3 wt % water have been studied by proton, deuteron, and oxygen-17 nuclear magnetic resonance (NMR). Comparisons between NMR results and previous dielectric relaxation (DR) results for a variety of Kapton films show that there is a one-to-one correspondence between specific dielectric loss peaks and features of the ²H or ¹⁷O NMR spectra. It is concluded that water molecules, which interact only weakly with the polymer, reside in the polyimide matrix in two configurations, randomly oriented single molecules and chains of water molecules oriented perpendicular to the plane of the film. The correspondence between NMR and DR observed in water in Kapton extends to water in Upilex and to methanol and acetic acid in Kapton. © 1995 John Wiley & Sons, Inc.     

光敏性聚酰亚胺的合成及其在液晶光致取向中的运用

通过羟基聚酰亚胺与肉桂酸的接枝反应合成了具有光敏性的聚酰亚胺,并且通过红外,核磁确定了光敏性聚酰亚胺的结构,将合成的聚酰亚胺作为液晶取向层用在液晶显示器件中,证明其有良好的热稳定性。     

Novel C3-symmetric molecular scaffolds with potential facial differentiation

The conversion of 1,3,5-substituted benzene and mesitylene by electrophilic aromatic substitution and Sonogashira cross-coupling, respectively, furnished the C3-symmetric, hexasubstituted benzene derivatives 1 and 2 with an alternating substitution pattern. Based on the molecular scaffolds obtained, the two systems serve as model compounds for novel receptor molecules with distinct geometric features. X-ray structures have been obtained for 1 and 2, which are discussed in regard to their aptitude as receptor platforms or supramolecular building blocks. By looking at the rotational barriers for the functional groups placed around the molecular scaffolds by variable temperature 1H NMR spectroscopy, 1 and 2 turn out to exist in rapidly interconverting conformations. The alignment of these potential binding groups around the molecular scaffolds should be strongly biased by specific interactions with suitable guest molecules.     

可溶性聚酰亚胺液晶取向膜的制备与性能

液晶取向膜是液晶显示器中的关键材料,为了制得性能优良的液晶取向膜,我们通过铃木偶联反应制备了3种含有不同末端基团的3,5-二氨基联苯,将制得的3种二胺单体分别与环丁烷四甲酸二酐聚合得到3种新型的聚酰亚胺。 利用核磁氢谱对单体和聚合物的结构进行了表征,测试了聚合物的溶解性、热稳定性以及用作液晶取向膜的性能。 结果表明,所得的聚酰亚胺具有良好的溶解性和热稳定性,经过机械摩擦后,末端带有甲氧基的聚酰亚胺能使液晶分子平行于摩擦方向取向,末端带有苯氧羰基和联苯氧羰基的聚酰亚胺能使液晶分子垂直于摩擦方向取向。 此类可溶性的聚酰亚胺液晶取向膜将简化制备工艺并在柔性显示器件中具有较大的应用价值。     

The SHAPES strategy: an NMR-based approach for lead generation in drug discovery.

BACKGROUND: Recently, it has been shown that nuclear magnetic resonance (NMR) may be used to identify ligands that bind to low molecular weight protein drug targets. Recognizing the utility of NMR as a very sensitive method for detecting binding, we have focused on developing alternative approaches that are applicable to larger molecular weight drug targets and do not require isotopic labeling. RESULTS: A new method for lead generation (SHAPES) is described that uses NMR to detect binding of a limited but diverse library of small molecules to a potential drug target. The compound scaffolds are derived from shapes most commonly found in known therapeutic agents. NMR detection of low (microM-mM) affinity binding is achieved using either differential line broadening or transferred NOE (nuclear Overhauser effect) NMR techniques. CONCLUSIONS: The SHAPES method for lead generation by NMR is useful for identifying potential lead classes of drugs early in a drug design program, and is easily integrated with other discovery tools such as virtual screening, high-throughput screening and combinatorial chemistry.     

Synthesis and characterization of fluorine functionalized graphene oxide dispersed quinoline-based polyimide composites having low-k and UV shielding properties

Polyimide nanocomposites having low-k and UV shielding properties have been developed using fluorine functionalized graphene oxide and bis(quinoline amine) based polyimide. The polyimide was synthesized using bis(quinoline amine) and pyromellitic dianhydride at appropriate experimental conditions, and its molecular structure was confirmed through various spectral analysis such as FTIR and NMR. The polyimide (PI) composites were prepared using bis(quinoline amine), pyromellitic dianhydride, and separately filled with 1, 5, 10 wt% of fluorinated graphene oxide (FGO) through in situ polymerization. The polymer composites were characterized using thermo gravimetric analysis (TGA), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). In addition, the water contact angle, dielectric behavior, and UV–Vis shielding behavior of FGO/PI composites were evaluated. The value of the water contact angle of the polyimide was increased with increment of FGO in the polyimide matrix. The highest water contact angle of polyimide composites observed 108° was obtained for 15 wt% FGO reinforced polyimide composite. The value of the dielectric constant for neat, 1, 5, and 15 wt% FGO reinforced polyimide composites was obtained as 4.5, 3.7, 2.6, and 2.0, respectively. It is also observed from by UV–Vis spectroscopy analysis that the FGO reinforced polyimide composites have good UV shielding behavior.     

Surface characterization, modification chemistry, and separation performance of polyimide and polyamidoamine dendrimer composite films

6FDA-polyimide films modified by polyamidoamine (PAMAM) dendrimers with generations of 0, 1, and 2 are reported in this article. The actual molecular conformation and bulk size of these three generation dendrimers immobilized on polyimide surface were characterized by atomic force microscopy. After comparing with the results of dynamic simulation, we believe that the disk-shape cluster structure of dendrimers has been developed on the polymer surfaces. The amidation and cross-linking reaction between dendrimers and polyimide were examined and quantified by X-ray photoelectron spectroscopy, attenuated total reflection Fourier transform infrared spectroscopy, and gel content measurements. Modification time and the generations of PAMAM dendrimer have been verified as two important factors in determining the properties of modified polyimide films. These modified polyimide films exhibit excellent gas separation performance. The ideal selectivity of He/N(2) increases tremendously to about 200% as compared to that of the original polyimide film. Particularly, the separation performance of CO(2)/CH(4) gas pair can be improved beyond the upper bond limit possibly due to the strong interactions of dendrimer molecules with CO(2), which was verified by sorption tests.     

Synthesis and Solution Properties of Loose Polymer Brushes Having Polyimide Backbone and Methylmethacrylate Side Chains

Summary: Graft-copolymers with polyimide backbone and PMMA side chains are synthesized by ATRP of methylmethacrylate on the polyimide macroinitiator. The obtained copolymers, macroinitiator, and cleaved side chains are investigated by ¹H NMR, SEC, static and dynamic light scattering, sedimentation, and viscosimetry in solutions. The synthesized copolymer is relatively loose polymer brushes: the average distance between grafted PMMA chains is ∼11 nm (4 repeat units of the backbone). The hydrodynamic and conformational characteristics of graft-copolymers change on passage from ethylacetate to chloroform due to difference in the thermodynamic quality of the solvents with respect to the copolymer components. The backbone is characterized more extended conformation than individual polyimide macromolecule.     

Investigation of alignment mechanism of liquid crystal on polyimide Langmuir-Blodgett films by scanning tunnelling microscopy

The homogeneous alignment of a liquid crystal material, 4'-n-octyl-4-cyanobiphenyl (8CB), was achieved by polyimide Langmuir-Blodgett (LB) films. Scanning electron microscopy and scanning tunnelling microscopy measurements show that the alignment of the polyimide LB films with a grooveless surface occurs due to the orientation of the polyimide chains. We directly observe 8CB monolayers on oriented polyimide LB films. We find that the monolayers form a two dimensional crystalline structure and the 8CB molecules are always aligned along the chain direction of the polyimide. The results show that the alignment of 8CB molecules arises by an epitaxial growth on the oriented polyimide LB films.     

Porphyrin-containing polyimide films deposited by high vacuum co-evaporation

Thin films of porphyrin-containing polyimide were produced by high vacuum co-evaporation of 4,4′-hexafluoroisopropylidene diphthalic anhydride (6FDA), 3,3′-diaminodiphenyl sulfone (DDS) and 5,10,15,20 meso-tetraphenyl porphyrin (TPP). The films were characterized by FT-IR analysis, optical absorption and emission spectroscopy. FT-IR analysis shows that the film matrix is comprised of only unreacted monomers. The conversion of monomers to polyamic acid and the following condensation to polyimide were studied by curing the samples at temperatures up to 240 °C. The amount of polyamic acid increases from room temperature to 120 °C, while at higher temperature it starts to condense to polyimide. Optical analysis shows that TPP is incorporated in the film matrix and its chemical state is determined by the interaction with the monomers, polyamic acid and polyimide. After curing the TPP molecules are finely dispersed in the polyimide matrix and their absorption and fluorescence properties are wholly preserved.     

Development of carbohydrate-based scaffolds for restricted presentation of recognition groups. Extension to divalent ligands and implications for the structure of dimerized receptors

The solution structure of glycosyl amides has been studied by using NMR. A strong preference is displayed by tertiary aromatic glycosyl amides for E-anti structures in contrast with secondary aromatic glycosyl amides where Z-anti structures predominate. The structural diversity displayed by these classes of molecules would seem to be important as the directional properties of the aromatic ring, or groups attached to the aromatic ring, would be determined by choosing to have either a secondary or tertiary amide at the anomeric center and could be considered when designing bioactive molecules with carbohydrate scaffolds. The structural analysis was also carried out for related divalent secondary and tertiary glycosyl amides and these compounds display preferences similar to that of the monovalent compounds. The constrained divalent compounds have potential for promoting formation of clusters that will have restricted structure and thus have potential for novel studies of mechanisms of action of multivalent ligands. Possible applications of such compounds would be as scaffolds for the design and synthesis of ligands that will facilitate protein-protein or other receptor-receptor interactions. The affinity of restricted divalent (or higher order) ligands, designed to bind to proteins that recognize carbohydrates which would facilitate clustering and concomitantly promote protein-protein interactions, may be significantly higher than monovalent counterparts or multivalent ligands without these properties. This may be useful as a new approach in the development of therapeutics based on carbohydrates.     

Synthesis, Characterization, and Long-Term Stability of Hollow Polymer Nanocapsules with Nanometer-Thin Walls

Hollow polymer nanocapsules are produced by the polymerization within hydrophobic interior of lipid bilayers that act as temporary self-assembled scaffolds. Pore-forming templates are co-dissolved with monomers in the bilayers to create pores with controlled size and chemical environment. Polymerization was monitored with UV spectroscopy and dynamic light scattering. High resolution magic angle spinning NMR characterization provided detailed structural information about nanocapsules. Spherical shape was confirmed by electron microscopy. Medium-sized molecules can be entrapped within porous nanocapsules. No release of encapsulated molecules was observed within 240 days.     

Investigation of alignment mechanism of liquid crystal on polyimide Langmuir-Blodgett films by scanning tunnelling microscopy

Abstract

The homogeneous alignment of a liquid crystal material, 4′-n-octyl-4-cyanobiphenyl (8CB), was achieved by polyimide Langmuir-Blodgett (LB) films. Scanning electron microscopy and scanning tunnelling microscopy measurements show that the alignment of the polyimide LB films with a grooveless surface occurs due to the orientation of the polyimide chains. We directly observe 8CB monolayers on oriented polyimide LB films. We find that the monolayers form a two dimensional crystalline structure and the 8CB molecules are always aligned along the chain direction of the polyimide. The results show that the alignment of 8CB molecules arises by an epitaxial growth on the oriented polyimide LB films.     

Synthesis and Properties of Hyperbranched Polyimides Combined with Silica

Summary: The novel hyperbranched polyimide - silica hybrid materials containing theoretically 16 wt% of an inorganic phase were prepared via a sol-gel process. An amine terminated polyimide precursor (hyperbranched polyamic acid) was prepared from commercially available monomers 4,4′,4″-triaminotriphenylmethane and 4,4′-oxydiphthalic anhydride in molar ratio 1:1. Tetramethoxysilane and/or 3-glycidoxypropyltrimethoxysilane (also used as a coupling agent) were used as silica precursors. During thermal exposition the polyimide precursor was transformed to hyperbranched polyimide and hydrolyzed alkoxy groups reacted mutually to form silica. The final products were self-standing films, whose structure was characterized by using IR and ¹³C and ²⁹Si solid state NMR spectroscopy. The influence of the amount of silica and/or coupling agent on their structure and thermal properties was described.     

Synthesis and characterization of novel photosensitive polyimide based on 5‐(2,5‐dioxotetrahydrofuryl)‐3‐methyl‐3‐cyclohexene‐1,2‐dicarboxylic anhydride

A negative type photosensitive polyimide with alicyclic moiety (NPI) was synthesized from 5‐(2,5‐dioxotetrahydrofuryl)‐3‐methyl‐3‐cyclohexene‐1,2‐dicarboxylic anhydride and 4,4‐diaminobenzophenone by one‐step polymerization in m‐cresol. Properties of the polyimides were characterized and a photo‐crosslinking mechanism was investigated using DEPT ¹³C‐NMR and FT‐IR spectroscopy. The negative polyimide showed good photosensitivity on exposure to UV light from a mercury xenon lamp. The polyimide showed remarkable solubility difference after photo‐ irradiation with an exposure dose of 500 mJ/cm². The resulting negative pattern of the photo‐cured NPI exhibited 10 μm resolution. Glass transition temperature of the photo‐crosslinked polyimide was about 307°C, which increased by 10°C compared to that of the polyimide before UV exposure. Transmittance of NPI after photo‐irradiation was about 87% at 500 nm. Copyright © 2004 John Wiley & Sons, Ltd.     

Effect of molecular weight on gas selectivity of oriented thin polyimide membrane

In this study, we focused on effect of the molecular weight of polyimide on the gas selectivity of the asymmetric membrane with an oriented surface skin layer prepared at different shear stresses. Asymmetric polyimide membranes, which have a defect‐free surface skin layer supported by a porous substructure, were prepared by a dry/wet phase inversion process. The structures of the asymmetric polyimides consisted of a thin skin layer and a porous substructure characterized by the presence of finger‐voids. The gas selectivities of the asymmetric polyimide membranes increased with an increase in the shear rate or a decrease in the molecular weight, indicating that the oriented polyimide structure in the surface skin layer provided a high size and shape discrimination between the gas molecules. The selectivity values of (O₂/N₂) and (CO₂/CH₄) in the asymmetric polyimide membrane prepared from the 7.2 × 10⁴ molecular weight material at 1000 sec^?1 shear rate were 12 and 143, respectively. Copyright © 2003 John Wiley & Sons, Ltd.     

取代法合成手性硫脲

以非手性或手性胺取代对称1,3-二苯基硫脲, 合成了一系列非手性和手性硫脲, 并取得了较高的产率. 对所有新化合物都通过IR, 1H NMR, 13C NMR, HRMS进行了全面的表征. 对手性硫脲7d单晶的X射线衍射分析表明, 在一个单元中有两种不同构象的分子, 它们的主要差别在于两个苯环的取向.     

1,3-Alternate calix[4]arene nitronyl nitroxide tetraradical and diradical: synthesis, X-ray crystallography, paramagnetic NMR spectroscopy, EPR spectroscopy, and magnetic studies

Calix[4]arenes constrained to 1,3-alternate conformation and functionalized at the upper rim with four and two nitronyl nitroxides have been synthesized, and characterized by X-ray crystallography, magnetic resonance (EPR and ¹H NMR) spectroscopy, and magnetic studies. Such calix[4]arene tetraradicals and diradicals provide scaffolds for through-bond and through-space intramolecular exchange couplings.     

Orientation of liquid crystalline 5CB under an external electric field

The orientation characteristics of pre-aligned liquid crystalline 5CB (4-n-pentyl-4′-cyanobiphenyl) in a germanium cell with unidirectional rubbed polyimide-coated surfaces have been investigated. Orientation of 5CB molecules near the polyimide surface and those representing average properties of the system (i.e., the bulk) are compared. The orientation of the bulk is monitored by transmission Fourier transform infrared (FT-IR) spectroscopy while that of the molecules next to the surface is observed via attenuated total reflection (ATR) FT-IR spectroscopy. There are significant differences in orientation characteristics between the two groups of molecules. For molecules near the polyimide surface, there is an observable difference in orientation of the soft and hard segments of the liquid crystalline. Moreover, they show depth dependent orientation.